Skip to content

C
C-Astral dialect C library
Commit b6d4a9f9 authored by PX4BuildBot's avatar PX4BuildBot
Browse files
Options

autogenerated headers for rev... 

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/4649d7c52524c5f0dcf08c94475a777b1f221671
parent 3b74f7b2
Hide whitespace changes
Inline Side-by-side
Showing with 55 additions and 56 deletions
ASLUAV/ASLUAV.h
View file @ b6d4a9f9
...@@ -89,8 +89,8 @@ typedef enum MAV_CMD ...@@ -89,8 +89,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -119,13 +119,13 @@ typedef enum MAV_CMD ...@@ -119,13 +119,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
ASLUAV/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
ardupilotmega/ardupilotmega.h
View file @ b6d4a9f9
...@@ -107,8 +107,8 @@ typedef enum MAV_CMD ...@@ -107,8 +107,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -139,13 +139,13 @@ typedef enum MAV_CMD ...@@ -139,13 +139,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
ardupilotmega/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
autoquad/autoquad.h
View file @ b6d4a9f9
...@@ -133,8 +133,8 @@ typedef enum MAV_CMD ...@@ -133,8 +133,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -163,13 +163,13 @@ typedef enum MAV_CMD ...@@ -163,13 +163,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
autoquad/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
common/common.h
View file @ b6d4a9f9
...@@ -443,8 +443,8 @@ typedef enum MAV_CMD ...@@ -443,8 +443,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -473,13 +473,13 @@ typedef enum MAV_CMD ...@@ -473,13 +473,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
common/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
matrixpilot/matrixpilot.h
View file @ b6d4a9f9
...@@ -106,8 +106,8 @@ typedef enum MAV_CMD ...@@ -106,8 +106,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -136,13 +136,13 @@ typedef enum MAV_CMD ...@@ -136,13 +136,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
matrixpilot/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
message_definitions/common.xml
View file @ b6d4a9f9
...@@ -1161,9 +1161,8 @@ ...@@ -1161,9 +1161,8 @@
<param index="7">MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude</param> <param index="7">MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude</param>
</entry> </entry>
<!-- Camera Controller Mission Commands Enumeration --> <!-- Camera Controller Mission Commands Enumeration -->
<!-- MAV_CMD_DO_DIGICAM_CONFIGURE should be deprecated and replaced with PARAM_EXT_XXX messages -->
<entry value="202" name="MAV_CMD_DO_DIGICAM_CONFIGURE"> <entry value="202" name="MAV_CMD_DO_DIGICAM_CONFIGURE">
<description>Mission command to configure an on-board camera controller system.</description> <description>THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html.</description>
<param index="1">Modes: P, TV, AV, M, Etc</param> <param index="1">Modes: P, TV, AV, M, Etc</param>
<param index="2">Shutter speed: Divisor number for one second</param> <param index="2">Shutter speed: Divisor number for one second</param>
<param index="3">Aperture: F stop number</param> <param index="3">Aperture: F stop number</param>
...@@ -1173,7 +1172,7 @@ ...@@ -1173,7 +1172,7 @@
<param index="7">Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)</param> <param index="7">Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)</param>
</entry> </entry>
<entry value="203" name="MAV_CMD_DO_DIGICAM_CONTROL"> <entry value="203" name="MAV_CMD_DO_DIGICAM_CONTROL">
<description>Mission command to control an on-board camera controller system.</description> <description>THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html.</description>
<param index="1">Session control e.g. show/hide lens</param> <param index="1">Session control e.g. show/hide lens</param>
<param index="2">Zoom's absolute position</param> <param index="2">Zoom's absolute position</param>
<param index="3">Zooming step value to offset zoom from the current position</param> <param index="3">Zooming step value to offset zoom from the current position</param>
...@@ -1429,12 +1428,12 @@ ...@@ -1429,12 +1428,12 @@
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
<entry value="521" name="MAV_CMD_REQUEST_CAMERA_INFORMATION"> <entry value="521" name="MAV_CMD_REQUEST_CAMERA_INFORMATION">
<description>WIP: Request camera information (CAMERA_INFORMATION).</description> <description>Request camera information (CAMERA_INFORMATION).</description>
<param index="1">0: No action 1: Request camera capabilities</param> <param index="1">0: No action 1: Request camera capabilities</param>
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
<entry value="522" name="MAV_CMD_REQUEST_CAMERA_SETTINGS"> <entry value="522" name="MAV_CMD_REQUEST_CAMERA_SETTINGS">
<description>WIP: Request camera settings (CAMERA_SETTINGS).</description> <description>Request camera settings (CAMERA_SETTINGS).</description>
<param index="1">0: No Action 1: Request camera settings</param> <param index="1">0: No Action 1: Request camera settings</param>
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
...@@ -1451,7 +1450,7 @@ ...@@ -1451,7 +1450,7 @@
<param index="3">Reserved (all remaining params)</param> <param index="3">Reserved (all remaining params)</param>
</entry> </entry>
<entry value="527" name="MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS"> <entry value="527" name="MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS">
<description>WIP: Request camera capture status (CAMERA_CAPTURE_STATUS)</description> <description>Request camera capture status (CAMERA_CAPTURE_STATUS)</description>
<param index="1">0: No Action 1: Request camera capture status</param> <param index="1">0: No Action 1: Request camera capture status</param>
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
...@@ -1461,7 +1460,7 @@ ...@@ -1461,7 +1460,7 @@
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
<entry value="529" name="MAV_CMD_RESET_CAMERA_SETTINGS"> <entry value="529" name="MAV_CMD_RESET_CAMERA_SETTINGS">
<description>WIP: Reset all camera settings to Factory Default</description> <description>Reset all camera settings to Factory Default</description>
<param index="1">0: No Action 1: Reset all settings</param> <param index="1">0: No Action 1: Reset all settings</param>
<param index="2">Reserved (all remaining params)</param> <param index="2">Reserved (all remaining params)</param>
</entry> </entry>
...@@ -4268,7 +4267,7 @@ ...@@ -4268,7 +4267,7 @@
<field type="char[30]" name="tune">tune in board specific format</field> <field type="char[30]" name="tune">tune in board specific format</field>
</message> </message>
<message id="259" name="CAMERA_INFORMATION"> <message id="259" name="CAMERA_INFORMATION">
<description>WIP: Information about a camera</description> <description>Information about a camera</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field> <field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field>
<field type="uint8_t[32]" name="vendor_name">Name of the camera vendor</field> <field type="uint8_t[32]" name="vendor_name">Name of the camera vendor</field>
<field type="uint8_t[32]" name="model_name">Name of the camera model</field> <field type="uint8_t[32]" name="model_name">Name of the camera model</field>
...@@ -4284,7 +4283,7 @@ ...@@ -4284,7 +4283,7 @@
<field type="char[140]" name="cam_definition_uri">Camera definition URI (if any, otherwise only basic functions will be available).</field> <field type="char[140]" name="cam_definition_uri">Camera definition URI (if any, otherwise only basic functions will be available).</field>
</message> </message>
<message id="260" name="CAMERA_SETTINGS"> <message id="260" name="CAMERA_SETTINGS">
<description>WIP: Settings of a camera, can be requested using MAV_CMD_REQUEST_CAMERA_SETTINGS.</description> <description>Settings of a camera, can be requested using MAV_CMD_REQUEST_CAMERA_SETTINGS.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field> <field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field>
<field type="uint8_t" name="mode_id" enum="CAMERA_MODE">Camera mode (CAMERA_MODE)</field> <field type="uint8_t" name="mode_id" enum="CAMERA_MODE">Camera mode (CAMERA_MODE)</field>
</message> </message>
...@@ -4301,7 +4300,7 @@ ...@@ -4301,7 +4300,7 @@
<field type="float" name="write_speed" units="Mibytes/s">Write speed in MiB/s</field> <field type="float" name="write_speed" units="Mibytes/s">Write speed in MiB/s</field>
</message> </message>
<message id="262" name="CAMERA_CAPTURE_STATUS"> <message id="262" name="CAMERA_CAPTURE_STATUS">
<description>WIP: Information about the status of a capture</description> <description>Information about the status of a capture</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field> <field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (milliseconds since system boot)</field>
<field type="uint8_t" name="image_status">Current status of image capturing (0: idle, 1: capture in progress, 2: interval set but idle, 3: interval set and capture in progress)</field> <field type="uint8_t" name="image_status">Current status of image capturing (0: idle, 1: capture in progress, 2: interval set but idle, 3: interval set and capture in progress)</field>
<field type="uint8_t" name="video_status">Current status of video capturing (0: idle, 1: capture in progress)</field> <field type="uint8_t" name="video_status">Current status of video capturing (0: idle, 1: capture in progress)</field>
......
minimal/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 9 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 9
......
slugs/slugs.h
View file @ b6d4a9f9
...@@ -89,8 +89,8 @@ typedef enum MAV_CMD ...@@ -89,8 +89,8 @@ typedef enum MAV_CMD
MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */
MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */
MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */
MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */
MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
...@@ -119,13 +119,13 @@ typedef enum MAV_CMD ...@@ -119,13 +119,13 @@ typedef enum MAV_CMD
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* WIP: Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* WIP: Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */
MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */
MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */
MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* WIP: Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */
MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */
MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */
MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */
......
slugs/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
standard/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
test/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
......
uAvionix/version.h
View file @ b6d4a9f9
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Tue Jan 16 2018" #define MAVLINK_BUILD_DATE "Thu Jan 18 2018"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7