autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/b83a2fe03a60a378bc0c3d4268f6816d26a6ae7f

autogenerated headers for rev...
autogenerated headers for rev https://github.com/mavlink/mavlink/tree/b83a2fe03a60a378bc0c3d4268f6816d26a6ae7f
d3cecc1a · PX4BuildBot · 6956c0b1 · d3cecc1a · d3cecc1a · d3cecc1a
Commit d3cecc1a authored Apr 24, 2020 by PX4BuildBot
18 changed files
--- a/ASLUAV/ASLUAV.h
+++ b/ASLUAV/ASLUAV.h
@@ -132,27 +132,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/ASLUAV/version.h
+++ b/ASLUAV/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/ardupilotmega/ardupilotmega.h
+++ b/ardupilotmega/ardupilotmega.h
@@ -153,27 +153,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/ardupilotmega/version.h
+++ b/ardupilotmega/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/autoquad/autoquad.h
+++ b/autoquad/autoquad.h
@@ -176,27 +176,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/autoquad/version.h
+++ b/autoquad/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/common/common.h
+++ b/common/common.h
@@ -752,27 +752,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/common/version.h
+++ b/common/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/icarous/version.h
+++ b/icarous/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/matrixpilot/matrixpilot.h
+++ b/matrixpilot/matrixpilot.h
@@ -149,27 +149,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/matrixpilot/version.h
+++ b/matrixpilot/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/message_definitions/common.xml
+++ b/message_definitions/common.xml
@@ -2127,23 +2127,29 @@
        <description>Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming.</description>
        <param index="1">Reserved (Set to 0)</param>
        <param index="2" label="Camera Mode" enum="CAMERA_MODE">Camera mode</param>
-        <param index="3">Reserved (all remaining params)</param>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="531" name="MAV_CMD_SET_CAMERA_ZOOM" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
-        <description>Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values.</description>
+        <description>Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success).</description>
        <param index="1" label="Zoom Type" enum="CAMERA_ZOOM_TYPE">Zoom type</param>
        <param index="2" label="Zoom Value">Zoom value. The range of valid values depend on the zoom type.</param>
-        <param index="3">Reserved (all remaining params)</param>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="532" name="MAV_CMD_SET_CAMERA_FOCUS" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
-        <description>Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values.</description>
+        <description>Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success).</description>
        <param index="1" label="Focus Type" enum="SET_FOCUS_TYPE">Focus type</param>
        <param index="2" label="Focus Value">Focus value</param>
-        <param index="3">Reserved (all remaining params)</param>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="600" name="MAV_CMD_JUMP_TAG" hasLocation="false" isDestination="false">
        <description>Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG.</description>
@@ -2194,14 +2200,20 @@
      <entry value="2001" name="MAV_CMD_IMAGE_STOP_CAPTURE" hasLocation="false" isDestination="false">
        <description>Stop image capture sequence Use NaN for reserved values.</description>
        <param index="1">Reserved (Set to 0)</param>
-        <param index="2">Reserved (all remaining params)</param>
+        <param index="2" reserved="True" default="NaN"/>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="2002" name="MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
-        <description>Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values.</description>
+        <description>Re-request a CAMERA_IMAGE_CAPTURE message.</description>
        <param index="1" label="Number" minValue="0" increment="1">Sequence number for missing CAMERA_IMAGE_CAPTURE message</param>
-        <param index="2">Reserved (all remaining params)</param>
+        <param index="2" reserved="True" default="NaN"/>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="2003" name="MAV_CMD_DO_TRIGGER_CONTROL" hasLocation="false" isDestination="false">
        <description>Enable or disable on-board camera triggering system.</description>
@@ -2210,43 +2222,48 @@
        <param index="3" label="Pause" minValue="-1" maxValue="1" increment="2">1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore</param>
      </entry>
      <entry value="2500" name="MAV_CMD_VIDEO_START_CAPTURE" hasLocation="false" isDestination="false">
-        <description>Starts video capture (recording). Use NaN for reserved values.</description>
+        <description>Starts video capture (recording).</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams)</param>
        <param index="2" label="Status Frequency" minValue="0" units="Hz">Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)</param>
-        <param index="3">Reserved (all remaining params)</param>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="5" reserved="True" default="NaN"/>
+        <param index="6" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="2501" name="MAV_CMD_VIDEO_STOP_CAPTURE" hasLocation="false" isDestination="false">
-        <description>Stop the current video capture (recording). Use NaN for reserved values.</description>
+        <description>Stop the current video capture (recording).</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams)</param>
-        <param index="2">Reserved (all remaining params)</param>
+        <param index="2" reserved="True" default="NaN"/>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="5" reserved="True" default="NaN"/>
+        <param index="6" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="2502" name="MAV_CMD_VIDEO_START_STREAMING" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
        <description>Start video streaming</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
-        <param index="2">Reserved</param>
      </entry>
      <entry value="2503" name="MAV_CMD_VIDEO_STOP_STREAMING" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
        <description>Stop the given video stream</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
-        <param index="2">Reserved</param>
      </entry>
      <entry value="2504" name="MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
        <description>Request video stream information (VIDEO_STREAM_INFORMATION)</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
-        <param index="2">Reserved (all remaining params)</param>
      </entry>
      <entry value="2505" name="MAV_CMD_REQUEST_VIDEO_STREAM_STATUS" hasLocation="false" isDestination="false">
        <wip/>
        <!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
        <description>Request video stream status (VIDEO_STREAM_STATUS)</description>
        <param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
-        <param index="2">Reserved (all remaining params)</param>
      </entry>
      <entry value="2510" name="MAV_CMD_LOGGING_START" hasLocation="false" isDestination="false">
        <description>Request to start streaming logging data over MAVLink (see also LOGGING_DATA message)</description>
@@ -2272,11 +2289,11 @@
        <description/>
        <param index="1" label="Landing Gear ID" minValue="-1" increment="1">Landing gear ID (default: 0, -1 for all)</param>
        <param index="2" label="Landing Gear Position">Landing gear position (Down: 0, Up: 1, NaN for no change)</param>
-        <param index="3">Reserved, set to NaN</param>
-        <param index="4">Reserved, set to NaN</param>
-        <param index="5">Reserved, set to NaN</param>
-        <param index="6">Reserved, set to NaN</param>
-        <param index="7">Reserved, set to NaN</param>
+        <param index="3" reserved="True" default="NaN"/>
+        <param index="4" reserved="True" default="NaN"/>
+        <param index="5" reserved="True" default="NaN"/>
+        <param index="6" reserved="True" default="NaN"/>
+        <param index="7" reserved="True" default="NaN"/>
      </entry>
      <entry value="2600" name="MAV_CMD_CONTROL_HIGH_LATENCY" hasLocation="false" isDestination="false">
        <description>Request to start/stop transmitting over the high latency telemetry</description>

--- a/minimal/version.h
+++ b/minimal/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22
 

--- a/slugs/slugs.h
+++ b/slugs/slugs.h
@@ -132,27 +132,27 @@ typedef enum MAV_CMD
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). Use NaN for reserved values. |Focus type| Focus value| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_ATTITUDE=1000, /* High level setpoint to be sent to a gimbal manager to set a gimbal attitude. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: a gimbal is never to react to this command but only the gimbal manager. |Tilt/pitch angular velocity (positive to point up).| Pan/yaw angular velocity (positive to pan to the right).| Pitch/tilt angle relative to world horizon (negative is to tilt down, positive to tilt up).| Yaw/pan angle (positive is pan to the right, relative to vehicle for PAN mode, absolute to North for HOLD mode) | Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_POINT=1001, /* If the gimbal manager supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Point to track x value.| Point to track y value.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
+   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
+   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */

--- a/slugs/version.h
+++ b/slugs/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/standard/version.h
+++ b/standard/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
 

--- a/test/version.h
+++ b/test/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
 

--- a/uAvionix/version.h
+++ b/uAvionix/version.h
@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H

-#define MAVLINK_BUILD_DATE "Thu Apr 23 2020"
+#define MAVLINK_BUILD_DATE "Fri Apr 24 2020"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255