Skip to content

C
config-amarisoft
Commit 7457a8e4 authored by Joanne Hugé's avatar Joanne Hugé
Browse files
Options

Add configs and scripts for testing of the new ORS prototype

parent 5b183083
Show whitespace changes
Inline Side-by-side
Showing with 933 additions and 4 deletions
enb/config-test-tilleul/enb.B43-3700.cfg 0 → 100644
View file @ 7457a8e4
/* lteenb configuration file version 2021-03-17
* Copyright (C) 2015-2021 Amarisoft
*/
#define TDD 1 // Values: 0 (FDD), 1(TDD)
#define N_RB_DL 100 // Values: 6 (1.4 MHz), 15 (3MHz), 25 (5MHz), 50 (10MHz), 75 (15MHz), 100 (20MHz)
#define N_ANTENNA_DL 1 // Values: 1 (SISO), 2 (MIMO 2x2)
#define N_ANTENNA_UL 1 // Values: 1, 2
#define CHANNEL_SIM 0 // Values: 0 (channel simulator disabled), 1 (channel simulator enabled)
{
/* Log filter: syntax: layer.field=value[,...]
Possible layers are phy, mac, rlc, pdcp, rrc, nas, s1ap, x2ap, gtpu and
all. The 'all' layer is used to address all the layers at the
same time.
field values:
- 'level': the log level of each layer can be set to 'none',
'error', 'info' or 'debug'. Use 'debug' to log all the messages.
- 'max_size': set the maximum size of the hex dump. 0 means no
hex dump. -1 means no limit.
*/
log_options: "all.level=debug,all.max_size=32",
//log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1",
log_filename: "/tmp/enb0.log",
/* Enable remote API and Web interface */
com_addr: "0.0.0.0:9001",
/* RF driver configuration */
#if !defined(N_CELL)
#define N_CELL 1
#endif
#if !defined(TDD)
#define TDD 0
#endif
#if !defined(N_ANTENNA_DL)
#define N_ANTENNA_DL 1
#endif
#if N_ANTENNA_DL <= 2
#define N_CHAN N_CELL
#else
#define N_CHAN 2*N_CELL
#endif
rf_driver: {
name: "sdr",
/* list of devices. 'dev0' is always the master. */
#if N_CHAN == 1
args: "dev0=/dev/sdr0",
#elif N_CHAN == 2
args: "dev0=/dev/sdr0,dev1=/dev/sdr1",
#elif N_CHAN == 3
args: "dev0=/dev/sdr0,dev1=/dev/sdr1,dev2=/dev/sdr2",
#elif N_CHAN == 4
args: "dev0=/dev/sdr0,dev1=/dev/sdr1,dev2=/dev/sdr2,dev3=/dev/sdr3",
#elif N_CHAN == 6
args: "dev0=/dev/sdr0,dev1=/dev/sdr1,dev2=/dev/sdr2,dev3=/dev/sdr3,dev4=/dev/sdr4,dev5=/dev/sdr5",
#else
args: "",
#endif
/* synchronisation source: none, internal, gps, external (default = none) */
// sync: "gps",
#if TDD == 1
rx_antenna:"tx_rx", // force to use the RX connector in TDD as RX antenna
#endif
},
tx_gain: 65.0, /* TX gain (in dB) */
rx_gain: 50.0, /* RX gain (in dB) */
#if CHANNEL_SIM == 1
rf_ports: [
{
channel_dl: {
type: "awgn",
noise_level: -30,
},
}
],
#endif
mme_list: [
{
/* address of MME for S1AP connection. Must be modified if the MME
runs on a different host. */
mme_addr: "127.0.1.100",
},
],
/* GTP bind address (=address of the ethernet interface connected to
the MME). Must be modified if the MME runs on a different host. */
gtp_addr: "127.0.1.1",
/* high 20 bits of SIB1.cellIdentifier */
enb_id: 0x1A2D0,
/* list of cells */
cell_list: [
{
/* Broadcasted PLMN identities */
plmn_list: [
"00101",
],
#if TDD == 1
//dl_earfcn: 38050, /* 2600 MHz (band 38) */
//dl_earfcn: 38350, /* 1890 MHz (band 39) */
//dl_earfcn: 42590, /* 3500 MHz (band 42) */
dl_earfcn: 44590, /* 3700 MHz (band 43) */
#else
//dl_earfcn: 300, /* DL center frequency: 2132 MHz (Band 1) */
//dl_earfcn: 900, /* DL center frequency: 1960 MHz (Band 2) */
//dl_earfcn: 1575, /* DL center frequency: 1842.5 MHz (Band 3) */
//dl_earfcn: 2150, /* DL center frequency: 2130 MHz (Band 4) */
//dl_earfcn: 2525, /* DL center frequency: 881.5 MHz (Band 5) */
dl_earfcn: 3350, /* DL center frequency: 2680 MHz (Band 7) */
//dl_earfcn: 6300, /* 806 MHz (Band 20) */
//dl_earfcn: 38050, /* 2600 MHz (band 38) */
//dl_earfcn: 40620, /* 2593 MHz (band 41) */
//dl_earfcn: 42590, /* 3500 MHz (band 42) */
#endif
n_id_cell: 1,
cell_id: 0x01,
tac: 0x0001,
root_sequence_index: 204, /* PRACH root sequence index */
},
], /* cell_list */
/* default cell parameters */
cell_default: {
n_antenna_dl: N_ANTENNA_DL, /* number of DL antennas */
n_antenna_ul: N_ANTENNA_UL, /* number of UL antennas */
#if TDD == 1
uldl_config: 2, /* TDD only */
sp_config: 7, /* TDD only */
#endif
n_rb_dl: N_RB_DL, /* Bandwidth: 25: 5 MHz, 50: 10 MHz, 75: 15 MHz, 100: 20 MHz */
cyclic_prefix: "normal",
phich_duration: "normal",
phich_resource: "1", /* ratio of NG */
/* SIB1 */
si_value_tag: 0, /* increment modulo 32 if SI is modified */
cell_barred: false, /* SIB1.cellBarred-r13 */
intra_freq_reselection: true, /* SIB1.intraFreqReselection */
q_rx_lev_min: -70, /* SIB1.q-RxLevMin */
p_max: 23, /* maximum power allowed for the UE (dBm) */
si_window_length: 40, /* ms */
sib_sched_list: [
{
filename: "sib23.asn",
si_periodicity: 16, /* frames */
},
],
#if N_RB_DL == 6
si_coderate: 0.30, /* maximum code rate for SI/RA/P-RNTI messages */
#else
si_coderate: 0.20, /* maximum code rate for SI/RA/P-RNTI messages */
#endif
si_pdcch_format: 2, /* 2 or 3. Log2 of the number of CCEs for PDCCH
for SI/RA/P-RNTI */
n_symb_cch: 0, /* number of symbols for CCH (0 = auto) */
/* PDSCH dedicated config (currently same for all UEs) */
pdsch_dedicated: {
#if N_ANTENNA_DL == 4
p_a: -6,
#elif N_ANTENNA_DL == 2
p_a: -3,
#else
p_a: 0,
#endif
p_b: -1, /* -1 means automatic */
},
/* If defined, force for number of CCEs for UE specific PDCCH to
2^pdcch_format. Otherwise it is computed from the reported
CQI. Range: 0 to 3. */
#if N_RB_DL == 6
pdcch_format: 1,
#else
pdcch_format: 2,
#endif
/* if defined, force the PDSCH MCS for all UEs. Otherwise it is
computed from the reported CQI */
/* pdsch_mcs: 12, */
#if N_RB_DL == 6
prach_config_index: 15, /* subframe 9 every 20 ms */
#else
prach_config_index: 4, /* subframe 4 every 10 ms */
#endif
prach_freq_offset: -1, /* -1 means automatic */
/* PUCCH dedicated config (currently same for all UEs) */
pucch_dedicated: {
n1_pucch_sr_count: 11, /* increase if more UEs are needed */
cqi_pucch_n_rb: 1, /* increase if more UEs are needed */
#if TDD == 1
//tdd_ack_nack_feedback_mode: "bundling", /* TDD only */
tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */
#endif
},
/* PUSCH dedicated config (currently same for all UEs) */
pusch_dedicated: {
beta_offset_ack_index: 9,
beta_offset_ri_index: 6,
beta_offset_cqi_index: 6,
},
pusch_hopping_offset: -1, /* -1 means automatic */
/* MCS for Msg3 (=CCCH RRC Connection Request) */
pusch_msg3_mcs: 0,
/* this CQI value is assumed when none is received from the UE */
#if N_RB_DL == 6
initial_cqi: 5,
#else
initial_cqi: 3,
#endif
/* if defined, force the PUSCH MCS for all UEs. Otherwise it is
computed from the last received SRS/PUSCH. */
// pusch_mcs: 18,
dl_256qam: true,
ul_64qam: true,
/* Scheduling request period (ms). Must be >= 40 for HD-FDD */
sr_period: 20,
/* CQI report config */
cqi_period: 40, /* period (ms). Must be >= 32 for HD-FDD */
#if N_ANTENNA_DL >= 2
/* RI reporting is done with a period of m_ri * cqi_period.
m_ri = 0 (default) disables RI reporting. */
m_ri: 8,
/* transmission mode */
transmission_mode: 3,
#endif
/* SRS dedicated config. All UEs share these
parameters. srs_config_index and freq_domain_position are
allocated for each UE) */
srs_dedicated: {
#if N_RB_DL == 6
srs_bandwidth_config: 7,
srs_bandwidth: 1,
#elif N_RB_DL == 15
srs_bandwidth_config: 6,
srs_bandwidth: 1,
#elif N_RB_DL == 25
srs_bandwidth_config: 3,
srs_bandwidth: 1,
#elif N_RB_DL == 50
srs_bandwidth_config: 2,
srs_bandwidth: 2,
#elif N_RB_DL == 75
srs_bandwidth_config: 2,
srs_bandwidth: 2,
#else
srs_bandwidth_config: 2,
srs_bandwidth: 3,
#endif
srs_subframe_config: 3, /* 0 - 15 */
srs_period: 40, /* period (ms). Must be >= 40 for HD-FDD */
srs_hopping_bandwidth: 0,
},
/* MAC configuration (same for all UEs) */
mac_config: {
ul_max_harq_tx: 5, /* max number of HARQ transmissions for uplink */
dl_max_harq_tx: 5, /* max number of HARQ transmissions for downlink */
},
/* CPU load limitation */
pusch_max_its: 6, /* max number of turbo decoder iterations */
/* dynamic power control */
dpc: true,
dpc_pusch_snr_target: 25,
dpc_pucch_snr_target: 20,
/* RRC/UP ciphering algorithm preference. EEA0 is always the last. */
cipher_algo_pref: [],
/* RRC integrity algorithm preference. EIA0 is always the last. */
integ_algo_pref: [2, 1],
/* (in ms) send RRC connection release after this time of network
inactivity */
inactivity_timer: 10000,
/* SRB configuration */
srb_config: [
{
id: 1,
maxRetxThreshold: 32,
t_Reordering: 45,
t_PollRetransmit: 60,
},
{
id: 2 ,
maxRetxThreshold: 32,
t_Reordering: 45,
t_PollRetransmit: 60,
}
],
/* DRB configuration */
drb_config: "drb.cfg",
},
}
enb/config-test-tilleul/gnb.N78-3699.cfg 0 → 100644
View file @ 7457a8e4
/* lteenb configuration file version 2021-03-17
* Copyright (C) 2019-2021 Amarisoft
* NR SA FDD or TDD cell */
#define TDD 1 // Values: 0 (NR FDD), 1(NR TDD)
#define TDD_CONFIG 2 // Values: 1, 2 or 3
#define N_ANTENNA_DL 1 // Values: 1 (SISO), 2 (MIMO 2x2), 4 (MIMO 4x4)
#define N_ANTENNA_UL 1 // Values: 1, 2, 4
#define BANDWIDTH 20 // NR cell bandwidth
/* define to 1 to enable periodic SRS with N_ANTENNA_UL ports. Uplink
SU-MIMO is also enabled if N_ANTENNA_UL >= 2. Not all UEs support
uplink SU-MIMO. */
#define USE_SRS 0
{
log_options: "all.level=debug,all.max_size=1",
//log_options: "all.level=error,all.max_size=1",
//log_filename: "/tmp/gnb0.log",
log_filename: LOGFILENAME,
/* Enable remote API and Web interface */
com_addr: "0.0.0.0:9001",
rf_driver: {
name: "sdr",
/* list of devices. 'dev0' is always the master. */
#if N_ANTENNA_DL >= 4
args: "dev0=/dev/sdr0,dev1=/dev/sdr1",
#else
args: "dev0=/dev/sdr0",
#endif
/* synchronisation source: none, internal, gps, external (default = none) */
// sync: "gps",
/* TDD: force the RX antenna on the RX connector */
rx_antenna:"tx_rx",
},
tx_gain: 70.0, /* TX gain (in dB) */
rx_gain: 50.0, /* RX gain (in dB) */
amf_list: [
{
/* address of AMF for NGAP connection. Must be modified if the AMF runs on a different host. */
amf_addr: "127.0.1.100",
},
],
/* GTP bind address (=address of the ethernet interface connected to
the AMF). Must be modified if the AMF runs on a different host. */
gtp_addr: "127.0.1.1",
gnb_id_bits: 28,
gnb_id: 0x12345,
nr_support: true,
/* list of cells */
cell_list: [],
nr_cell_list: [
{
rf_port: 0,
cell_id: 0x01,
#if TDD == 1
band: 78,
dl_nr_arfcn: 646666, /* 3699.990 MHz */
#else
band: 7,
dl_nr_arfcn: 536020, /* 2680 MHz */
ssb_subcarrier_spacing: 15,
#endif
},
], /* nr_cell_list */
nr_cell_default: {
subcarrier_spacing: 30, /* kHz */
bandwidth: BANDWIDTH, /* MHz */
n_antenna_dl: N_ANTENNA_DL,
n_antenna_ul: N_ANTENNA_UL,
/* force the timing TA offset (optional) */
// n_timing_advance_offset: 39936,
#if TDD == 1
tdd_ul_dl_config: {
pattern1: {
#if TDD_CONFIG == 1
period: 5, /* in ms */
dl_slots: 7,
dl_symbols: /* 6 */ 2,
ul_slots: 2,
ul_symbols: 2,
#elif TDD_CONFIG == 2
period: 5, /* in ms */
dl_slots: 7,
dl_symbols: 6,
ul_slots: 2,
ul_symbols: 4,
#elif TDD_CONFIG == 3
period: 5, /* in ms */
dl_slots: 6,
dl_symbols: 2,
ul_slots: 3,
ul_symbols: 2,
#endif
},
},
ssb_pos_bitmap: "10000000",
#else
ssb_pos_bitmap: "1000",
#endif
ssb_period: 20, /* in ms */
n_id_cell: 500,
plmn_list: [ {
tac: 100,
plmn: "00101",
reserved: false,
nssai: [
{
sst: 1,
},
/*{
sst: 2,
},
{
sst: 3,
sd: 50,
},*/
],
},
],
/*sib_sched_list: [
{
filename: "sib2_nr.asn",
si_periodicity: 16,
},
{
filename: "sib3_nr.asn",
si_periodicity: 16,
},
{
filename: "sib4_nr.asn",
si_periodicity: 32,
},
],
sib9: {
si_periodicity: 32
},*/
si_window_length: 40,
cell_barred: false,
intra_freq_reselection: true,
q_rx_lev_min: -70,
q_qual_min: -20,
p_max: 23, /* dBm */
root_sequence_index: 1, /* PRACH root sequence index */
/* Scheduling request period (slots). */
sr_period: 40,
dmrs_type_a_pos: 2,
/* to limit the number of HARQ feedback in UL, use pdsch_harq_ack_max;
allows to workaround issues with SM-G977N for example */
//pdsch_harq_ack_max: 2,
prach: {
#if TDD == 1
prach_config_index: 160, /* format B4, subframe 9 */
msg1_subcarrier_spacing: 30, /* kHz */
#else
prach_config_index: 16, /* subframe 1 every frame */
#endif
msg1_fdm: 1,
msg1_frequency_start: 0,
zero_correlation_zone_config: 15,
preamble_received_target_power: -110, /* in dBm */
preamble_trans_max: 7,
power_ramping_step: 4, /* in dB */
ra_response_window: 20, /* in slots */
restricted_set_config: "unrestricted_set",
ra_contention_resolution_timer: 64, /* in ms */
ssb_per_prach_occasion: 1,
cb_preambles_per_ssb: 8,
},
pdcch: {
n_rb_coreset0: 48,
n_symb_coreset0: 1,
search_space0_index: 0,
dedicated_coreset: {
rb_start: -1, /* -1 to have the maximum bandwidth */
l_crb: -1, /* -1 means all the bandwidth */
duration: 1,
precoder_granularity: "sameAsREG_bundle",
},
css: {
n_candidates: [ 0, 0, 1, 0, 0 ],
},
rar_al_index: 2,
si_al_index: 2,
uss: {
n_candidates: [ 0, 2, 1, 0, 0 ],
dci_0_1_and_1_1: true,
},
al_index: 1,
},
pdsch: {
mapping_type: "typeA",
dmrs_add_pos: 1,
dmrs_type: 1,
dmrs_max_len: 1,
k0: 0, /* delay in slots from DCI to PDSCH */
/* delay in slots from PDSCH to PUCCH/PUSCH ACK/NACK */
#if TDD == 1
#if TDD_CONFIG == 1
k1: [ 8, 7, 7, 6, 5, 4, 12 /* , 11 */ ],
#elif TDD_CONFIG == 2
k1: [ 8, 7, 7, 6, 5, 4, 12, 11 ],
#elif TDD_CONFIG == 3
k1: [ 7, 6, 6, 5, 5, 4 ],
#endif
#else
k1: 4,
#endif
mcs_table: "qam256",
rar_mcs: 2,
si_mcs: 6,
/* If defined, force the PDSCH MCS for all UEs. Otherwise it is computed
* based on DL channel quality estimation */
/* mcs: 24, */
},
csi_rs: {
nzp_csi_rs_resource: [
{
csi_rs_id: 0,
#if N_ANTENNA_DL == 1
n_ports: 1,
frequency_domain_allocation: "row2",
bitmap: "100000000000",
cdm_type: "no_cdm",
#elif N_ANTENNA_DL == 2
n_ports: 2,
frequency_domain_allocation: "other",
bitmap: "100000",
cdm_type: "fd_cdm2",
#elif N_ANTENNA_DL == 4
n_ports: 4,
frequency_domain_allocation: "row4",
bitmap: "100",
cdm_type: "fd_cdm2",
#elif N_ANTENNA_DL == 8
n_ports: 8,
frequency_domain_allocation: "other",
bitmap: "110011",
cdm_type: "fd_cdm2",
#else
#error unsupported number of DL antennas
#endif
density: 1,
first_symb: 4,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
power_control_offset: 0, /* dB */
power_control_offset_ss: 0, /* dB */
period: 80,
offset: 1, /* != 0 to avoid collision with SSB */
qcl_info_periodic_csi_rs: 0,
},
#define USE_TRS
#ifdef USE_TRS
/* TRS : period of 40 ms, slots 1 & 2, symbols 4 and 8 */
{
csi_rs_id: 1,
n_ports: 1,
frequency_domain_allocation: "row1",
bitmap: "0001",
cdm_type: "no_cdm",
density: 3,
first_symb: 4,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
power_control_offset: 0, /* dB */
power_control_offset_ss: 0, /* dB */
period: 40,
offset: 11,
qcl_info_periodic_csi_rs: 0,
},
{
csi_rs_id: 2,
n_ports: 1,
frequency_domain_allocation: "row1",
bitmap: "0001",
cdm_type: "no_cdm",
density: 3,
first_symb: 8,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
power_control_offset: 0, /* dB */
power_control_offset_ss: 0, /* dB */
period: 40,
offset: 11,
qcl_info_periodic_csi_rs: 0,
},
{
csi_rs_id: 3,
n_ports: 1,
frequency_domain_allocation: "row1",
bitmap: "0001",
cdm_type: "no_cdm",
density: 3,
first_symb: 4,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
power_control_offset: 0, /* dB */
power_control_offset_ss: 0, /* dB */
period: 40,
offset: 12,
qcl_info_periodic_csi_rs: 0,
},
{
csi_rs_id: 4,
n_ports: 1,
frequency_domain_allocation: "row1",
bitmap: "0001",
cdm_type: "no_cdm",
density: 3,
first_symb: 8,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
power_control_offset: 0, /* dB */
power_control_offset_ss: 0, /* dB */
period: 40,
offset: 12,
qcl_info_periodic_csi_rs: 0,
},
#endif
],
nzp_csi_rs_resource_set: [
{
csi_rs_set_id: 0,
nzp_csi_rs_resources: [ 0 ],
repetition: false,
},
#ifdef USE_TRS
{
csi_rs_set_id: 1,
nzp_csi_rs_resources: [ 1, 2, 3, 4 ],
repetition: false,
trs_info: true,
},
#endif
],
csi_im_resource: [
{
csi_im_id: 0,
pattern: 1,
subcarrier_location: 8,
symbol_location: 8,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
period: 80,
offset: 1, /* != 0 to avoid collision with SSB */
},
],
csi_im_resource_set: [
{
csi_im_set_id: 0,
csi_im_resources: [ 0 ],
}
],
/* ZP CSI-RS to set the CSI-IM REs to zero */
zp_csi_rs_resource: [
{
csi_rs_id: 0,
frequency_domain_allocation: "row4",
bitmap: "100",
n_ports: 4,
cdm_type: "fd_cdm2",
first_symb: 8,
density: 1,
rb_start: 0,
l_crb: -1, /* -1 means from rb_start to the end of the bandwidth */
period: 80,
offset: 1,
},
],
p_zp_csi_rs_resource_set: [
{
zp_csi_rs_resources: [ 0 ],
},
],
csi_resource_config: [
{
csi_rsc_config_id: 0,
nzp_csi_rs_resource_set_list: [ 0 ],
resource_type: "periodic",
},
{
csi_rsc_config_id: 1,
csi_im_resource_set_list: [ 0 ],
resource_type: "periodic",
},
#ifdef USE_TRS
{
csi_rsc_config_id: 2,
nzp_csi_rs_resource_set_list: [ 1 ],
resource_type: "periodic",
},
#endif
],
csi_report_config: [
{
resources_for_channel_measurement: 0,
csi_im_resources_for_interference: 1,
report_config_type: "periodic",
period: 80,
report_quantity: "CRI_RI_PMI_CQI",
#if N_ANTENNA_DL > 1
codebook_config: {
codebook_type: "type1",
sub_type: "typeI_SinglePanel",
#if N_ANTENNA_DL == 2
#elif N_ANTENNA_DL == 4
n1: 2,
n2: 1,
codebook_mode: 1,
#elif N_ANTENNA_DL == 8
n1: 4,
n2: 1,
codebook_mode: 1,
#endif
},
#endif
cqi_table: 2,
subband_size: "value1",
},
],
},
pucch: {
pucch_group_hopping: "neither",
hopping_id: -1, /* -1 = n_cell_id */
p0_nominal: -90,
#if 0
pucch0: {
initial_cyclic_shift: 1,
n_symb: 1,
},
#else
pucch1: {
n_cs: 3,
n_occ: 3,
freq_hopping: true,
},
#endif
#if 1
pucch2: {
n_symb: 2,
n_prb: 1,
freq_hopping: true,
simultaneous_harq_ack_csi: false,
max_code_rate: 0.25,
},
#endif
#if 0
pucch3: {
bpsk: false,
additional_dmrs: false,
freq_hopping: true,
n_prb: 1,
simultaneous_harq_ack_csi: false,
max_code_rate: 0.25,
},
#endif
#if 0
pucch4: {
occ_len: 4,
bpsk: false,
additional_dmrs: false,
freq_hopping: true,
simultaneous_harq_ack_csi: false,
max_code_rate: 0.25,
},
#endif
},
#if USE_SRS
srs: {
#if TDD_CONFIG == 1 || TDD_CONFIG == 2
srs_symbols: [ 0, 0, 0, 0, 0, 0, 0, 2, 0, 0 ],
#elif TDD_CONFIG == 3
srs_symbols: [ 0, 0, 0, 0, 0, 0, 2, 0, 0, 0 ],
#endif
srs_resource: [
{
srs_resource_id: 0,
n_ports: N_ANTENNA_UL,
resource_type: "periodic",
period: 80, /* in slots */
}
],
srs_resource_set: [
{
srs_resource_id_list: [ 0 ],
},
],
},
#endif
pusch: {
mapping_type: "typeA",
n_symb: 14,
dmrs_add_pos: 1,
dmrs_type: 1,
dmrs_max_len: 1,
tf_precoding: false,
mcs_table: "qam256", /* without transform precoding */
mcs_table_tp: "qam256", /* with transform precoding */
ldpc_max_its: 5,
k2: 4, /* delay in slots from DCI to PUSCH */
p0_nominal_with_grant: -76,
msg3_k2: 7,
msg3_mcs: 4,
msg3_delta_power: 0, /* in dB */
beta_offset_ack_index: 9,
/* if defined, force the PUSCH MCS for all UEs. Otherwise it is
computed from the last received PUSCH. */
/* mcs: 16, */
},
/* MAC configuration */
mac_config: {
msg3_max_harq_tx: 5,
ul_max_harq_tx: 5, /* max number of HARQ transmissions for uplink */
dl_max_harq_tx: 5, /* max number of HARQ transmissions for downlink */
ul_max_consecutive_retx: 30, /* disconnect UE if reached */
dl_max_consecutive_retx: 30, /* disconnect UE if reached */
periodic_bsr_timer: 20,
retx_bsr_timer: 320,
periodic_phr_timer: 500,
prohibit_phr_timer: 200,
phr_tx_power_factor_change: "dB3",
sr_prohibit_timer: 0, /* in ms, 0 to disable the timer */
sr_trans_max: 64,
},
cipher_algo_pref: [],
integ_algo_pref: [2, 1],
inactivity_timer: 10000,
drb_config: "drb_nr.cfg",
},
}
enb/enb.cfg
View file @ 7457a8e4
sunwave/gnb.sunwave-3700.cfg
\ No newline at end of file
ors-config/gnb.N78-3699.cfg
\ No newline at end of file
enb/ors-config/gnb.N78-3699.cfg
View file @ 7457a8e4
......@@ -2,7 +2,6 @@
* Copyright (C) 2019-2021 Amarisoft
* NR SA FDD or TDD cell */
#define TDD 1 // Values: 0 (NR FDD), 1(NR TDD)
#define TDD_CONFIG 2 // Values: 1, 2 or 3
#define N_ANTENNA_DL 2 // Values: 1 (SISO), 2 (MIMO 2x2), 4 (MIMO 4x4)
......@@ -15,10 +14,12 @@
#define USE_SRS 0
{
log_options: "all.level=debug,all.max_size=1",
//log_options: "all.level=debug,all.max_size=1",
log_options: "all.level=debug,all.max_size=32,file.rotate=200M,file.path=/dev/null",
//log_options: "all.level=error,all.max_size=1",
log_filename: "/tmp/gnb0.log",
//log_filename: LOGFILENAME,
/* Enable remote API and Web interface */
com_addr: "0.0.0.0:9001",
......
mme/mme.cfg
View file @ 7457a8e4
mme-ims.cfg
\ No newline at end of file
mme-slapos.cfg
\ No newline at end of file
start-enb 0 → 100755
View file @ 7457a8e4
#!/bin/bash
if [ -z "$1" ]; then
echo "Log name missing";
exit;
fi
ENB_LOG_DIR="/root/enb-logs"
ENB_OUTPUT_DIR="/root/enb-outputs"
if [ -n "$2" ]; then
ENB_CONFIG="$2"
else
ENB_CONFIG="/root/enb/config/enb.cfg"
fi
if [ -f "${ENB_LOG_DIR}/$1" ]; then
read -p "$1 already exists, overwrite ? [Yy]" -n 1 -r && echo
if [[ ! $REPLY =~ ^[Yy]$ ]]; then
exit 1
fi
fi
mkdir -p $ENB_LOG_DIR;
mkdir -p $ENB_OUTPUT_DIR;
sed -i 's/"\/tmp\/gnb0\.log"/LOGFILENAME/g' $ENB_CONFIG;
sed -i 's/"\/tmp\/enb0\.log"/LOGFILENAME/g' $ENB_CONFIG;
/root/stop-enb;
screen -L -Logfile ${ENB_OUTPUT_DIR}/$1 -S enb sh -c 'set /root/enb/lteenb -D LOGFILENAME="'${ENB_LOG_DIR}/$1'" '$ENB_CONFIG'; "$@"; echo "$@"; exec $SHELL'
stop-enb 0 → 100755
View file @ 7457a8e4
#!/bin/bash
screen -XS enb quit 2> /dev/null;
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7