- download patch instead of using local storage

git-svn-id: https://svn.erp5.org/repos/public/erp5/trunk@31984 20353a03-c40f-0410-a6d1-a30d3c3de9de

buildout/mysql-tritonn-5.0/buildout.cfg

@@ -21,16 +21,19 @@ recipe = hexagonit.recipe.cmmi
 url = http://sourceforge.jp/frs/redir.php?m=jaist&f=%2Fsenna%2F33763%2Fsenna-1.1.4.tar.gz
 configure-options = --without-mecab --enable-nfkc=no
 
+[tritonn-patch]
+recipe = hexagonit.recipe.download
+url = http://dl.sourceforge.jp/tritonn/44472/tritonn-1.0.12-mysql-5.0.87.diff
+download-only = true
+
 [mysql-tritonn-5.0]
+dumb_dependency = ${tritonn-patch:url}
 recipe = hexagonit.recipe.cmmi
 url = http://downloads.mysql.com/archives/mysql-5.0/mysql-5.0.87.tar.gz
 pre-configure-hook = ${buildout:directory}/mysql-tritonn-5.0/src/mysql_pre_configure.py:hook
 configure-options = --with-senna --without-mecab
 patch-options = -p1
-# might be better to download patch from
-# http://sourceforge.jp/frs/redir.php?m=iij&f=%2Ftritonn%2F44472%2Ftritonn-1.0.12-mysql-5.0.87.diff
-# but putting in url downloads to redir.php instead of proper file name
-patches = ${buildout:directory}/mysql-tritonn-5.0/patches/tritonn-1.0.12-mysql-5.0.87.diff
+patches = ${buildout:directory}/downloads/tritonn-1.0.12-mysql-5.0.87.diff
 environment =
     PATH =${senna:location}/bin:%(PATH)s
 

buildout/mysql-tritonn-5.0/patches/mysql-5.0.67-add-ylwrap.diff

-diff -Nru mysql-5.0.67-orig/ylwrap mysql-5.0.67/ylwrap
---- mysql-5.0.67-orig/ylwrap	1970-01-01 01:00:00.000000000 +0100
-+++ mysql-5.0.67/ylwrap	2009-10-11 23:58:20.000000000 +0200
-@@ -0,0 +1,223 @@
-+#! /bin/sh
-+# ylwrap - wrapper for lex/yacc invocations.
-+
-+scriptversion=2007-11-22.22
-+
-+# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-+# 2007  Free Software Foundation, Inc.
-+#
-+# Written by Tom Tromey <tromey@cygnus.com>.
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-+# 02110-1301, USA.
-+
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# This file is maintained in Automake, please report
-+# bugs to <bug-automake@gnu.org> or send patches to
-+# <automake-patches@gnu.org>.
-+
-+case "$1" in
-+  '')
-+    echo "$0: No files given.  Try \`$0 --help' for more information." 1>&2
-+    exit 1
-+    ;;
-+  --basedir)
-+    basedir=$2
-+    shift 2
-+    ;;
-+  -h|--h*)
-+    cat <<\EOF
-+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-+
-+Wrapper for lex/yacc invocations, renaming files as desired.
-+
-+  INPUT is the input file
-+  OUTPUT is one file PROG generates
-+  DESIRED is the file we actually want instead of OUTPUT
-+  PROGRAM is program to run
-+  ARGS are passed to PROG
-+
-+Any number of OUTPUT,DESIRED pairs may be used.
-+
-+Report bugs to <bug-automake@gnu.org>.
-+EOF
-+    exit $?
-+    ;;
-+  -v|--v*)
-+    echo "ylwrap $scriptversion"
-+    exit $?
-+    ;;
-+esac
-+
-+
-+# The input.
-+input="$1"
-+shift
-+case "$input" in
-+  [\\/]* | ?:[\\/]*)
-+    # Absolute path; do nothing.
-+    ;;
-+  *)
-+    # Relative path.  Make it absolute.
-+    input="`pwd`/$input"
-+    ;;
-+esac
-+
-+pairlist=
-+while test "$#" -ne 0; do
-+  if test "$1" = "--"; then
-+    shift
-+    break
-+  fi
-+  pairlist="$pairlist $1"
-+  shift
-+done
-+
-+# The program to run.
-+prog="$1"
-+shift
-+# Make any relative path in $prog absolute.
-+case "$prog" in
-+  [\\/]* | ?:[\\/]*) ;;
-+  *[\\/]*) prog="`pwd`/$prog" ;;
-+esac
-+
-+# FIXME: add hostname here for parallel makes that run commands on
-+# other machines.  But that might take us over the 14-char limit.
-+dirname=ylwrap$$
-+trap "cd '`pwd`'; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
-+mkdir $dirname || exit 1
-+
-+cd $dirname
-+
-+case $# in
-+  0) "$prog" "$input" ;;
-+  *) "$prog" "$@" "$input" ;;
-+esac
-+ret=$?
-+
-+if test $ret -eq 0; then
-+  set X $pairlist
-+  shift
-+  first=yes
-+  # Since DOS filename conventions don't allow two dots,
-+  # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-+  # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-+  y_tab_nodot="no"
-+  if test -f y_tab.c || test -f y_tab.h; then
-+    y_tab_nodot="yes"
-+  fi
-+
-+  # The directory holding the input.
-+  input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-+  # Quote $INPUT_DIR so we can use it in a regexp.
-+  # FIXME: really we should care about more than `.' and `\'.
-+  input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-+
-+  while test "$#" -ne 0; do
-+    from="$1"
-+    # Handle y_tab.c and y_tab.h output by DOS
-+    if test $y_tab_nodot = "yes"; then
-+      if test $from = "y.tab.c"; then
-+    	from="y_tab.c"
-+      else
-+    	if test $from = "y.tab.h"; then
-+    	  from="y_tab.h"
-+    	fi
-+      fi
-+    fi
-+    if test -f "$from"; then
-+      # If $2 is an absolute path name, then just use that,
-+      # otherwise prepend `../'.
-+      case "$2" in
-+    	[\\/]* | ?:[\\/]*) target="$2";;
-+    	*) target="../$2";;
-+      esac
-+
-+      # We do not want to overwrite a header file if it hasn't
-+      # changed.  This avoid useless recompilations.  However the
-+      # parser itself (the first file) should always be updated,
-+      # because it is the destination of the .y.c rule in the
-+      # Makefile.  Divert the output of all other files to a temporary
-+      # file so we can compare them to existing versions.
-+      if test $first = no; then
-+	realtarget="$target"
-+	target="tmp-`echo $target | sed s/.*[\\/]//g`"
-+      fi
-+      # Edit out `#line' or `#' directives.
-+      #
-+      # We don't want the resulting debug information to point at
-+      # an absolute srcdir; it is better for it to just mention the
-+      # .y file with no path.
-+      #
-+      # We want to use the real output file name, not yy.lex.c for
-+      # instance.
-+      #
-+      # We want the include guards to be adjusted too.
-+      FROM=`echo "$from" | sed \
-+            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-+            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-+      TARGET=`echo "$2" | sed \
-+            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-+            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-+
-+      sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
-+          -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-+
-+      # Check whether header files must be updated.
-+      if test $first = no; then
-+	if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
-+	  echo "$2" is unchanged
-+	  rm -f "$target"
-+	else
-+          echo updating "$2"
-+          mv -f "$target" "$realtarget"
-+        fi
-+      fi
-+    else
-+      # A missing file is only an error for the first file.  This
-+      # is a blatant hack to let us support using "yacc -d".  If -d
-+      # is not specified, we don't want an error when the header
-+      # file is "missing".
-+      if test $first = yes; then
-+        ret=1
-+      fi
-+    fi
-+    shift
-+    shift
-+    first=no
-+  done
-+else
-+  ret=$?
-+fi
-+
-+# Remove the directory.
-+cd ..
-+rm -rf $dirname
-+
-+exit $ret
-+
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End: