Skip to content

G
gitlab-ce
Commit 334a4093 authored by Achilleas Pipinellis's avatar Achilleas Pipinellis
Browse files
Options

Rename builds to jobs in docs 

[ci skip]
parent 68be6738
Expand all Show whitespace changes
Inline Side-by-side
Showing with 814 additions and 776 deletions
doc/administration/build_artifacts.md
View file @ 334a4093
# Build artifacts administration
>**Notes:**
>- Introduced in GitLab 8.2 and GitLab Runner 0.7.0.
>- Starting from GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format
changed to `ZIP`.
>- This is the administration documentation. For the user guide see
[user/project/builds/artifacts.md](../user/project/builds/artifacts.md).
Artifacts is a list of files and directories which are attached to a build
after it completes successfully. This feature is enabled by default in all
GitLab installations. Keep reading if you want to know how to disable it.
## Disabling build artifacts
To disable artifacts site-wide, follow the steps below.
---
**In Omnibus installations:**
1. Edit `/etc/gitlab/gitlab.rb` and add the following line:
```ruby
gitlab_rails['artifacts_enabled'] = false
```
1. Save the file and [reconfigure GitLab][] for the changes to take effect.
---
**In installations from source:**
1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines:
```yaml
artifacts:
enabled: false
```
1. Save the file and [restart GitLab][] for the changes to take effect.
## Storing build artifacts
After a successful build, GitLab Runner uploads an archive containing the build
artifacts to GitLab.
To change the location where the artifacts are stored, follow the steps below.
---
**In Omnibus installations:**
_The artifacts are stored by default in
`/var/opt/gitlab/gitlab-rails/shared/artifacts`._
1. To change the storage path for example to `/mnt/storage/artifacts`, edit
`/etc/gitlab/gitlab.rb` and add the following line:
```ruby
gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts"
```
1. Save the file and [reconfigure GitLab][] for the changes to take effect.
---
**In installations from source:**
_The artifacts are stored by default in
`/home/git/gitlab/shared/artifacts`._
1. To change the storage path for example to `/mnt/storage/artifacts`, edit
`/home/git/gitlab/config/gitlab.yml` and add or amend the following lines:
```yaml
artifacts:
enabled: true
path: /mnt/storage/artifacts
```
1. Save the file and [restart GitLab][] for the changes to take effect.
## Set the maximum file size of the artifacts
Provided the artifacts are enabled, you can change the maximum file size of the
artifacts through the [Admin area settings](../user/admin_area/settings/continuous_integration.md#maximum-artifacts-size).
[reconfigure gitlab]: restart_gitlab.md "How to restart GitLab"
[restart gitlab]: restart_gitlab.md "How to restart GitLab"
## Storage statistics
You can see the total storage used for build artifacts on groups and projects
in the administration area, as well as through the [groups](../api/groups.md)
and [projects APIs](../api/projects.md).
This document was moved to [jobs_artifacts](jobs_artifacts.md).
doc/administration/job_artifacts.md 0 → 100644
View file @ 334a4093
# Jobs artifacts administration
>**Notes:**
>- Introduced in GitLab 8.2 and GitLab Runner 0.7.0.
>- Starting with GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format
changed to `ZIP`.
>- Starting with GitLab 8.17, builds are renamed to jobs.
>- This is the administration documentation. For the user guide see
[pipelines/job_artifacts](../user/project/pipelines/job_artifacts.md).
Artifacts is a list of files and directories which are attached to a job
after it completes successfully. This feature is enabled by default in all
GitLab installations. Keep reading if you want to know how to disable it.
## Disabling job artifacts
To disable artifacts site-wide, follow the steps below.
---
**In Omnibus installations:**
1. Edit `/etc/gitlab/gitlab.rb` and add the following line:
```ruby
gitlab_rails['artifacts_enabled'] = false
```
1. Save the file and [reconfigure GitLab][] for the changes to take effect.
---
**In installations from source:**
1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines:
```yaml
artifacts:
enabled: false
```
1. Save the file and [restart GitLab][] for the changes to take effect.
## Storing job artifacts
After a successful job, GitLab Runner uploads an archive containing the job
artifacts to GitLab.
To change the location where the artifacts are stored, follow the steps below.
---
**In Omnibus installations:**
_The artifacts are stored by default in
`/var/opt/gitlab/gitlab-rails/shared/artifacts`._
1. To change the storage path for example to `/mnt/storage/artifacts`, edit
`/etc/gitlab/gitlab.rb` and add the following line:
```ruby
gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts"
```
1. Save the file and [reconfigure GitLab][] for the changes to take effect.
---
**In installations from source:**
_The artifacts are stored by default in
`/home/git/gitlab/shared/artifacts`._
1. To change the storage path for example to `/mnt/storage/artifacts`, edit
`/home/git/gitlab/config/gitlab.yml` and add or amend the following lines:
```yaml
artifacts:
enabled: true
path: /mnt/storage/artifacts
```
1. Save the file and [restart GitLab][] for the changes to take effect.
## Set the maximum file size of the artifacts
Provided the artifacts are enabled, you can change the maximum file size of the
artifacts through the [Admin area settings](../user/admin_area/settings/continuous_integration.md#maximum-artifacts-size).
## Storage statistics
You can see the total storage used for job artifacts on groups and projects
in the administration area, as well as through the [groups](../api/groups.md)
and [projects APIs](../api/projects.md).
## Implementation details
When GitLab receives an artifacts archive, an archive metadata file is also
generated. This metadata file describes all the entries that are located in the
artifacts archive itself. The metadata file is in a binary format, with
additional GZIP compression.
GitLab does not extract the artifacts archive in order to save space, memory
and disk I/O. It instead inspects the metadata file which contains all the
relevant information. This is especially important when there is a lot of
artifacts, or an archive is a very large file.
When clicking on a specific file, [GitLab Workhorse] extracts it
from the archive and the download begins. This implementation saves space,
memory and disk I/O.
[reconfigure gitlab]: restart_gitlab.md "How to restart GitLab"
[restart gitlab]: restart_gitlab.md "How to restart GitLab"
[gitlab workhorse]: https://gitlab.com/gitlab-org/gitlab-workhorse "GitLab Workhorse repository"
doc/ci/README.md
View file @ 334a4093
......@@ -2,22 +2,22 @@
## CI User documentation
- [Get started with GitLab CI](quick_start/README.md)
- [Getting started with GitLab CI](quick_start/README.md)
- [CI examples for various languages](examples/README.md)
- [Learn how to enable or disable GitLab CI](enable_or_disable_ci.md)
- [Pipelines and builds](pipelines.md)
- [Pipelines and jobs](pipelines.md)
- [Environments and deployments](environments.md)
- [Learn how `.gitlab-ci.yml` works](yaml/README.md)
- [Configure a Runner, the application that runs your builds](runners/README.md)
- [Configure a Runner, the application that runs your jobs](runners/README.md)
- [Use Docker images with GitLab Runner](docker/using_docker_images.md)
- [Use CI to build Docker images](docker/using_docker_build.md)
- [CI Variables](variables/README.md) - Learn how to use variables defined in
your `.gitlab-ci.yml` or secured ones defined in your project's settings
- [Use SSH keys in your build environment](ssh_keys/README.md)
- [Trigger builds through the API](triggers/README.md)
- [Build artifacts](../user/project/builds/artifacts.md)
- [Trigger jobs through the API](triggers/README.md)
- [Job artifacts](../user/project/pipelines/job_artifacts.md)
- [User permissions](../user/permissions.md#gitlab-ci)
- [Build permissions](../user/permissions.md#build-permissions)
- [Jobs permissions](../user/permissions.md#jobs-permissions)
- [API](../api/ci/README.md)
- [CI services (linked docker containers)](services/README.md)
- [CI/CD pipelines settings](../user/project/pipelines/settings.md)
......@@ -27,6 +27,6 @@
## Breaking changes
- [New CI build permissions model](../user/project/new_ci_build_permissions_model.md)
Read about what changed in GitLab 8.12 and how that affects your builds.
There's a new way to access your Git submodules and LFS objects in builds.
- [New CI job permissions model](../user/project/new_ci_build_permissions_model.md)
Read about what changed in GitLab 8.12 and how that affects your jobs.
There's a new way to access your Git submodules and LFS objects in jobs.
doc/ci/build_artifacts/README.md
View file @ 334a4093
This document was moved to:
- [user/project/builds/artifacts.md](../../user/project/builds/artifacts.md) - user guide
- [administration/build_artifacts.md](../../administration/build_artifacts.md) - administrator guide
This document was moved to [user/project/job_artifacts.md](../../user/project/job_artifacts.md).
doc/ci/docker/README.md
View file @ 334a4093
# Docker integration
+ [Using Docker Images](using_docker_images.md)
+ [Using Docker Build](using_docker_build.md)
\ No newline at end of file
- [Using Docker Images](using_docker_images.md)
- [Using Docker Build](using_docker_build.md)
doc/ci/docker/using_docker_build.md
View file @ 334a4093
......@@ -12,6 +12,7 @@ One of the new trends in Continuous Integration/Deployment is to:
1. deploy to a server from the pushed image.
It's also useful when your application already has the `Dockerfile` that can be used to create and test an image:
```bash
$ docker build -t my-image dockerfiles/
$ docker run my-docker-image /script/to/run/tests
......@@ -19,23 +20,23 @@ $ docker tag my-image my-registry:5000/my-image
$ docker push my-registry:5000/my-image
```
This requires special configuration of GitLab Runner to enable `docker` support during builds.
This requires special configuration of GitLab Runner to enable `docker` support during jobs.
## Runner Configuration
There are three methods to enable the use of `docker build` and `docker run` during builds; each with their own tradeoffs.
There are three methods to enable the use of `docker build` and `docker run` during jobs; each with their own tradeoffs.
### Use shell executor
The simplest approach is to install GitLab Runner in `shell` execution mode.
GitLab Runner then executes build scripts as the `gitlab-runner` user.
GitLab Runner then executes job scripts as the `gitlab-runner` user.
1. Install [GitLab Runner](https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/#installation).
1. During GitLab Runner installation select `shell` as method of executing build scripts or use command:
1. During GitLab Runner installation select `shell` as method of executing job scripts or use command:
```bash
$ sudo gitlab-ci-multi-runner register -n \
sudo gitlab-ci-multi-runner register -n \
--url https://gitlab.com/ci \
--registration-token REGISTRATION_TOKEN \
--executor shell \
......@@ -50,16 +51,17 @@ GitLab Runner then executes build scripts as the `gitlab-runner` user.
3. Add `gitlab-runner` user to `docker` group:
```bash
$ sudo usermod -aG docker gitlab-runner
sudo usermod -aG docker gitlab-runner
```
4. Verify that `gitlab-runner` has access to Docker:
```bash
$ sudo -u gitlab-runner -H docker info
sudo -u gitlab-runner -H docker info
```
You can now verify that everything works by adding `docker info` to `.gitlab-ci.yml`:
```yaml
before_script:
- docker info
......@@ -80,12 +82,12 @@ For more information please read [On Docker security: `docker` group considered
The second approach is to use the special docker-in-docker (dind)
[Docker image](https://hub.docker.com/_/docker/) with all tools installed
(`docker` and `docker-compose`) and run the build script in context of that
(`docker` and `docker-compose`) and run the job script in context of that
image in privileged mode.
In order to do that, follow the steps:
1. Install [GitLab Runner](https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/#installation).
1. Install [GitLab Runner](https://docs.gitlab.com/runner/install).
1. Register GitLab Runner from the command line to use `docker` and `privileged`
mode:
......@@ -155,10 +157,10 @@ not without its own challenges:
escalation which can lead to container breakout. For more information, check
out the official Docker documentation on
[Runtime privilege and Linux capabilities][docker-cap].
- Using docker-in-docker, each build is in a clean environment without the past
history. Concurrent builds work fine because every build gets it's own
- When using docker-in-docker, each job is in a clean environment without the past
history. Concurrent jobs work fine because every build gets it's own
instance of Docker engine so they won't conflict with each other. But this
also means builds can be slower because there's no caching of layers.
also means jobs can be slower because there's no caching of layers.
- By default, `docker:dind` uses `--storage-driver vfs` which is the slowest
form offered. To use a different driver, see
[Using the overlayfs driver](#using-the-overlayfs-driver).
......@@ -171,7 +173,7 @@ The third approach is to bind-mount `/var/run/docker.sock` into the container so
In order to do that, follow the steps:
1. Install [GitLab Runner](https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/#installation).
1. Install [GitLab Runner](https://docs.gitlab.com/runner/install).
1. Register GitLab Runner from the command line to use `docker` and share `/var/run/docker.sock`:
......@@ -187,7 +189,9 @@ In order to do that, follow the steps:
The above command will register a new Runner to use the special
`docker:latest` image which is provided by Docker. **Notice that it's using
the Docker daemon of the Runner itself, and any containers spawned by docker commands will be siblings of the Runner rather than children of the runner.** This may have complications and limitations that are unsuitable for your workflow.
the Docker daemon of the Runner itself, and any containers spawned by docker
commands will be siblings of the Runner rather than children of the runner.**
This may have complications and limitations that are unsuitable for your workflow.
The above command will create a `config.toml` entry similar to this:
......@@ -206,7 +210,8 @@ In order to do that, follow the steps:
Insecure = false
```
1. You can now use `docker` in the build script (note that you don't need to include the `docker:dind` service as when using the Docker in Docker executor):
1. You can now use `docker` in the build script (note that you don't need to
include the `docker:dind` service as when using the Docker in Docker executor):
```yaml
image: docker:latest
......@@ -221,18 +226,23 @@ In order to do that, follow the steps:
- docker run my-docker-image /script/to/run/tests
```
While the above method avoids using Docker in privileged mode, you should be aware of the following implications:
* By sharing the docker daemon, you are effectively disabling all
the security mechanisms of containers and exposing your host to privilege
escalation which can lead to container breakout. For example, if a project
ran `docker rm -f $(docker ps -a -q)` it would remove the GitLab Runner
containers.
* Concurrent builds may not work; if your tests
create containers with specific names, they may conflict with each other.
* Sharing files and directories from the source repo into containers may not
work as expected since volume mounting is done in the context of the host
machine, not the build container.
e.g. `docker run --rm -t -i -v $(pwd)/src:/home/app/src test-image:latest run_app_tests`
While the above method avoids using Docker in privileged mode, you should be
aware of the following implications:
- By sharing the docker daemon, you are effectively disabling all
the security mechanisms of containers and exposing your host to privilege
escalation which can lead to container breakout. For example, if a project
ran `docker rm -f $(docker ps -a -q)` it would remove the GitLab Runner
containers.
- Concurrent jobs may not work; if your tests
create containers with specific names, they may conflict with each other.
- Sharing files and directories from the source repo into containers may not
work as expected since volume mounting is done in the context of the host
machine, not the build container, e.g.:
```
docker run --rm -t -i -v $(pwd)/src:/home/app/src test-image:latest run_app_tests
```
## Using the OverlayFS driver
......@@ -299,7 +309,7 @@ push to the Registry connected to your project. Its password is provided in the
of your Docker images.
Here's a more elaborate example that splits up the tasks into 4 pipeline stages,
including two tests that run in parallel. The build is stored in the container
including two tests that run in parallel. The `build` is stored in the container
registry and used by subsequent stages, downloading the image
when needed. Changes to `master` also get tagged as `latest` and deployed using
an application-specific deploy script:
......@@ -360,17 +370,17 @@ deploy:
Some things you should be aware of when using the Container Registry:
- You must log in to the container registry before running commands. Putting
this in `before_script` will run it before each build job.
this in `before_script` will run it before each job.
- Using `docker build --pull` makes sure that Docker fetches any changes to base
images before building just in case your cache is stale. It takes slightly
longer, but means you don’t get stuck without security patches to base images.
- Doing an explicit `docker pull` before each `docker run` makes sure to fetch
the latest image that was just built. This is especially important if you are
using multiple runners that cache images locally. Using the git SHA in your
image tag makes this less necessary since each build will be unique and you
image tag makes this less necessary since each job will be unique and you
shouldn't ever have a stale image, but it's still possible if you re-build a
given commit after a dependency has changed.
- You don't want to build directly to `latest` in case there are multiple builds
- You don't want to build directly to `latest` in case there are multiple jobs
happening simultaneously.
[docker-in-docker]: https://blog.docker.com/2013/09/docker-can-now-run-within-docker/
......
doc/ci/docker/using_docker_images.md
View file @ 334a4093
......@@ -8,7 +8,7 @@ run applications in independent "containers" that are run within a single Linux
instance. [Docker Hub][hub] has a rich database of pre-built images that can be
used to test and build your applications.
Docker, when used with GitLab CI, runs each build in a separate and isolated
Docker, when used with GitLab CI, runs each job in a separate and isolated
container using the predefined image that is set up in
[`.gitlab-ci.yml`](../yaml/README.md).
......@@ -45,12 +45,12 @@ can be found at [Docker Hub][hub]. For more information about images and Docker
Hub please read the [Docker Fundamentals][] documentation.
In short, with `image` we refer to the docker image, which will be used to
create a container on which your build will run.
create a container on which your job will run.
## What is a service
The `services` keyword defines just another docker image that is run during
your build and is linked to the docker image that the `image` keyword defines.
your job and is linked to the docker image that the `image` keyword defines.
This allows you to access the service image during build time.
The service image can run any application, but the most common use case is to
......@@ -61,13 +61,13 @@ time the project is built.
You can see some widely used services examples in the relevant documentation of
[CI services examples](../services/README.md).
### How services are linked to the build
### How services are linked to the job
To better understand how the container linking works, read
[Linking containers together][linking-containers].
To summarize, if you add `mysql` as service to your application, the image will
then be used to create a container that is linked to the build container.
then be used to create a container that is linked to the job container.
The service container for MySQL will be accessible under the hostname `mysql`.
So, in order to access your database service you have to connect to the host
......@@ -133,7 +133,7 @@ Look for the `[runners.docker]` section:
services = ["mysql:latest", "postgres:latest"]
```
The image and services defined this way will be added to all builds run by
The image and services defined this way will be added to all job run by
that runner.
## Define an image from a private Docker registry
......@@ -167,7 +167,7 @@ services:
- tutum/wordpress:latest
```
When the build is run, `tutum/wordpress` will be started and you will have
When the job is run, `tutum/wordpress` will be started and you will have
access to it from your build container under the hostname `tutum__wordpress`.
The alias hostname for the service is made from the image name following these
......@@ -202,21 +202,21 @@ See the specific documentation for
## How Docker integration works
Below is a high level overview of the steps performed by docker during build
Below is a high level overview of the steps performed by docker during job
time.
1. Create any service container: `mysql`, `postgresql`, `mongodb`, `redis`.
1. Create cache container to store all volumes as defined in `config.toml` and
`Dockerfile` of build image (`ruby:2.1` as in above example).
1. Create build container and link any service container to build container.
1. Start build container and send build script to the container.
1. Run build script.
1. Start build container and send job script to the container.
1. Run job script.
1. Checkout code in: `/builds/group-name/project-name/`.
1. Run any step defined in `.gitlab-ci.yml`.
1. Check exit status of build script.
1. Remove build container and all created service containers.
## How to debug a build locally
## How to debug a job locally
*Note: The following commands are run without root privileges. You should be
able to run docker with your regular user account.*
......
doc/ci/enable_or_disable_ci.md
View file @ 334a4093
......@@ -11,10 +11,10 @@ API.
---
As of GitLab 8.2, GitLab CI is mainly exposed via the `/builds` page of a
project. Disabling GitLab CI in a project does not delete any previous builds.
In fact, the `/builds` page can still be accessed, although it's hidden from
the left sidebar menu.
GitLab CI is exposed via the `/pipelines` and `/builds` pages of a project.
Disabling GitLab CI in a project does not delete any previous jobs.
In fact, the `/pipelines` and `/builds` pages can still be accessed, although
it's hidden from the left sidebar menu.
GitLab CI is enabled by default on new installations and can be disabled either
individually under each project's settings, or site-wide by modifying the
......
doc/ci/environments.md
View file @ 334a4093
......@@ -75,7 +75,7 @@ We have defined 3 [stages](yaml/README.md#stages):
- deploy
The jobs assigned to these stages will run in this order. If a job fails, then
the builds that are assigned to the next stage won't run, rendering the pipeline
the jobs that are assigned to the next stage won't run, rendering the pipeline
as failed. In our case, the `test` job will run first, then the `build` and
lastly the `deploy_staging`. With this, we ensure that first the tests pass,
then our app is able to be built successfully, and lastly we deploy to the
......@@ -119,7 +119,7 @@ There's a bunch of information there, specifically you can see:
- The environment's name with a link to its deployments
- The last deployment ID number and who performed it
- The build ID of the last deployment with its respective job name
- The job ID of the last deployment with its respective job name
- The commit information of the last deployment such as who committed, to what
branch and the Git SHA of the commit
- The exact time the last deployment was performed
......@@ -219,9 +219,9 @@ deploy_prod:
The `when: manual` action exposes a play button in GitLab's UI and the
`deploy_prod` job will only be triggered if and when we click that play button.
You can find it in the pipeline, build, environment, and deployment views.
You can find it in the pipeline, job, environment, and deployment views.
| Pipelines | Single pipeline | Environments | Deployments | Builds |
| Pipelines | Single pipeline | Environments | Deployments | jobs |
| --------- | ----------------| ------------ | ----------- | -------|
| ![Pipelines manual action](img/environments_manual_action_pipelines.png) | ![Pipelines manual action](img/environments_manual_action_single_pipeline.png) | ![Environments manual action](img/environments_manual_action_environments.png) | ![Deployments manual action](img/environments_manual_action_deployments.png) | ![Builds manual action](img/environments_manual_action_builds.png) |
......@@ -419,7 +419,7 @@ Behind the scenes:
- GitLab Runner picks up the changes and starts running the jobs
- The jobs run sequentially as defined in `stages`
- First, the tests pass
- Then, the build begins and successfully also passes
- Then, the job begins and successfully also passes
- Lastly, the app is deployed to an environment with a name specific to the
branch
......
doc/ci/examples/deployment/README.md
View file @ 334a4093
......@@ -91,7 +91,7 @@ Secure Variables can added by going to `Project > Variables > Add Variable`.
**This feature requires `gitlab-runner` with version equal or greater than 0.4.0.**
The variables that are defined in the project settings are sent along with the build script to the runner.
The secure variables are stored out of the repository. Never store secrets in your projects' .gitlab-ci.yml.
It is also important that secret's value is hidden in the build log.
It is also important that secret's value is hidden in the job log.
You access added variable by prefixing it's name with `$` (on non-Windows runners) or `%` (for Windows Batch runners):
1. `$SECRET_VARIABLE` - use it for non-Windows runners
......
doc/ci/examples/deployment/composer-npm-deploy.md
View file @ 334a4093
......@@ -65,7 +65,7 @@ In order, this means that:
1. We check if the `ssh-agent` is available and we install it if it's not;
2. We create the `~/.ssh` folder;
3. We make sure we're running bash;
4. We disable host checking (we don't ask for user accept when we first connect to a server; and since every build will equal a first connect, we kind of need this)
4. We disable host checking (we don't ask for user accept when we first connect to a server; and since every job will equal a first connect, we kind of need this)
And this is basically all you need in the `before_script` section.
......
doc/ci/examples/php.md
View file @ 334a4093
......@@ -15,10 +15,10 @@ This will allow us to test PHP projects against different versions of PHP.
However, not everything is plug 'n' play, you still need to configure some
things manually.
As with every build, you need to create a valid `.gitlab-ci.yml` describing the
As with every job, you need to create a valid `.gitlab-ci.yml` describing the
build environment.
Let's first specify the PHP image that will be used for the build process
Let's first specify the PHP image that will be used for the job process
(you can read more about what an image means in the Runner's lingo reading
about [Using Docker images](../docker/using_docker_images.md#what-is-image)).
......@@ -58,8 +58,8 @@ docker-php-ext-install pdo_mysql
```
You might wonder what `docker-php-ext-install` is. In short, it is a script
provided by the official php docker image that you can use to easilly install
extensions. For more information read the the documentation at
provided by the official php docker image that you can use to easily install
extensions. For more information read the documentation at
<https://hub.docker.com/r/_/php/>.
Now that we created the script that contains all prerequisites for our build
......@@ -142,7 +142,7 @@ Of course, `my_php.ini` must be present in the root directory of your repository
## Test PHP projects using the Shell executor
The shell executor runs your builds in a terminal session on your server.
The shell executor runs your job in a terminal session on your server.
Thus, in order to test your projects you first need to make sure that all
dependencies are installed.
......@@ -280,7 +280,7 @@ that runs on [GitLab.com](https://gitlab.com) using our publicly available
[shared runners](../runners/README.md).
Want to hack on it? Simply fork it, commit and push your changes. Within a few
moments the changes will be picked by a public runner and the build will begin.
moments the changes will be picked by a public runner and the job will begin.
[php-hub]: https://hub.docker.com/r/_/php/
[phpenv]: https://github.com/phpenv/phpenv
......
doc/ci/examples/test-scala-application.md
View file @ 334a4093
......@@ -51,14 +51,14 @@ The `deploy` stage automatically deploys the project to Heroku using dpl.
You can use other versions of Scala and SBT by defining them in
`build.sbt`.
## Display test coverage in build
## Display test coverage in job
Add the `Coverage was \[\d+.\d+\%\]` regular expression in the
**Settings ➔ Edit Project ➔ Test coverage parsing** project setting to
**Settings ➔ CI/CD Pipelines ➔ Coverage report** project setting to
retrieve the [test coverage] rate from the build trace and have it
displayed with your builds.
displayed with your jobs.
**Builds** must be enabled for this option to appear.
**Pipelines** must be enabled for this option to appear.
## Heroku application
......
doc/ci/git_submodules.md
View file @ 334a4093
# Using Git submodules with GitLab CI
> **Notes:**
- GitLab 8.12 introduced a new [CI build permissions model][newperms] and you
- GitLab 8.12 introduced a new [CI job permissions model][newperms] and you
are encouraged to upgrade your GitLab instance if you haven't done already.
If you are **not** using GitLab 8.12 or higher, you would need to work your way
around submodules in order to access the sources of e.g., `gitlab.com/group/project`
with the use of [SSH keys](ssh_keys/README.md).
- With GitLab 8.12 onward, your permissions are used to evaluate what a CI build
- With GitLab 8.12 onward, your permissions are used to evaluate what a CI job
can access. More information about how this system works can be found in the
[Build permissions model](../user/permissions.md#builds-permissions).
[Jobs permissions model](../user/permissions.md#jobs-permissions).
- The HTTP(S) Git protocol [must be enabled][gitpro] in your GitLab instance.
## Configuring the `.gitmodules` file
......@@ -27,7 +27,7 @@ Let's consider the following example:
If you are using GitLab 8.12+ and your submodule is on the same GitLab server,
you must update your `.gitmodules` file to use **relative URLs**.
Since Git allows the usage of relative URLs for your `.gitmodules` configuration,
this easily allows you to use HTTP(S) for cloning all your CI builds and SSH
this easily allows you to use HTTP(S) for cloning all your CI jobs and SSH
for all your local checkouts. The `.gitmodules` would look like:
```ini
......@@ -38,7 +38,7 @@ for all your local checkouts. The `.gitmodules` would look like:
The above configuration will instruct Git to automatically deduce the URL that
should be used when cloning sources. Whether you use HTTP(S) or SSH, Git will use
that same channel and it will allow to make all your CI builds use HTTP(S)
that same channel and it will allow to make all your CI jobs use HTTP(S)
(because GitLab CI only uses HTTP(S) for cloning your sources), and all your local
clones will continue using SSH.
......@@ -57,13 +57,13 @@ Once `.gitmodules` is correctly configured, you can move on to
## Using Git submodules in your CI jobs
There are a few steps you need to take in order to make submodules work
correctly with your CI builds:
correctly with your CI jobs:
1. First, make sure you have used [relative URLs](#configuring-the-gitmodules-file)
for the submodules located in the same GitLab server.
1. Next, if you are using `gitlab-ci-multi-runner` v1.10+, you can set the
`GIT_SUBMODULE_STRATEGY` variable to either `normal` or `recursive` to tell
the runner to fetch your submodules before the build:
the runner to fetch your submodules before the job:
```yaml
variables:
GIT_SUBMODULE_STRATEGY: recursive
......@@ -87,9 +87,9 @@ The rationale to set the `sync` and `update` in `before_script` is because of
the way Git submodules work. On a fresh Runner workspace, Git will set the
submodule URL including the token in `.git/config`
(or `.git/modules/<submodule>/config`) based on `.gitmodules` and the current
remote URL. On subsequent builds on the same Runner, `.git/config` is cached
remote URL. On subsequent jobs on the same Runner, `.git/config` is cached
and already contains a full URL for the submodule, corresponding to the previous
build, and to **a token from a previous build**. `sync` allows to force updating
job, and to **a token from a previous job**. `sync` allows to force updating
the full URL.
[gitpro]: ../user/admin_area/settings/visibility_and_access_controls.md#enabled-git-access-protocols
......
doc/ci/pipelines.md
View file @ 334a4093
# Introduction to pipelines and builds
# Introduction to pipelines and jobs
>**Note:**
Introduced in GitLab 8.8.
## Pipelines
A pipeline is a group of [builds][] that get executed in [stages][](batches).
All of the builds in a stage are executed in parallel (if there are enough
A pipeline is a group of [jobs][] that get executed in [stages][](batches).
All of the jobs in a stage are executed in parallel (if there are enough
concurrent [Runners]), and if they all succeed, the pipeline moves on to the
next stage. If one of the builds fails, the next stage is not (usually)
next stage. If one of the jobs fails, the next stage is not (usually)
executed.
![Pipelines example](img/pipelines.png)
## Builds
## Types of Pipelines
Builds are individual runs of [jobs]. Not to be confused with a `build` job or
`build` stage.
There are three types of pipelines that often use the single shorthand of "pipeline". People often talk about them as if each one is "the" pipeline, but really, they're just pieces of a single, comprehensive pipeline.
![Types of Pipelines](img/types-of-pipelines.svg)
1. **CI Pipeline**: Build and test stages defined in `.gitlab-ci.yml`
2. **Deploy Pipeline**: Deploy stage(s) defined in `.gitlab-ci.yml` The flow of deploying code to servers through various stages: e.g. development to staging to production
3. **Project Pipeline**: Cross-project CI dependencies [triggered via API]((triggers)), particularly for micro-services, but also for complicated build dependencies: e.g. api -> front-end, ce/ee -> omnibus.
## Development Workflows
Pipelines accommodate several development workflows:
1. **Branch Flow** (e.g. different branch for dev, qa, staging, production)
2. **Trunk-based Flow** (e.g. feature branches and single master branch, possibly with tags for releases)
3. **Fork-based Flow** (e.g. merge requests come from forks)
Example continuous delivery flow:
![CD Flow](img/pipelines-goal.svg)
## Jobs
Jobs can be defined in the [`.gitlab-ci.yml`][jobs-yaml] file. Not to be
confused with a `build` job or `build` stage.
## Defining pipelines
......@@ -30,11 +52,11 @@ See full [documentation](yaml/README.md#jobs).
You can find the current and historical pipeline runs under **Pipelines** for
your project.
## Seeing build status
## Seeing job status
Clicking on a pipeline will show the builds that were run for that pipeline.
Clicking on an individual build will show you its build trace, and allow you to
cancel the build, retry it, or erase the build trace.
Clicking on a pipeline will show the jobs that were run for that pipeline.
Clicking on an individual job will show you its job trace, and allow you to
cancel the job, retry it, or erase the job trace.
## How the pipeline duration is calculated
......@@ -69,11 +91,11 @@ total running time should be:
## Badges
Build status and test coverage report badges are available. You can find their
Job status and test coverage report badges are available. You can find their
respective link in the [Pipelines settings] page.
[builds]: #builds
[jobs]: yaml/README.md#jobs
[jobs]: #jobs
[jobs-yaml]: yaml/README.md#jobs
[stages]: yaml/README.md#stages
[runners]: runners/README.html
[pipelines settings]: ../user/project/pipelines/settings.md
doc/ci/quick_start/README.md
View file @ 334a4093
# Quick Start
# Getting started with GitLab CI
>**Note:** Starting from version 8.0, GitLab [Continuous Integration][ci] (CI)
is fully integrated into GitLab itself and is [enabled] by default on all
......@@ -7,7 +7,7 @@ projects.
GitLab offers a [continuous integration][ci] service. If you
[add a `.gitlab-ci.yml` file][yaml] to the root directory of your repository,
and configure your GitLab project to use a [Runner], then each merge request or
push triggers your CI [pipeline].
push, triggers your CI [pipeline].
The `.gitlab-ci.yml` file tells the GitLab runner what to do. By default it runs
a pipeline with three [stages]: `build`, `test`, and `deploy`. You don't need to
......@@ -31,13 +31,13 @@ So in brief, the steps needed to have a working CI can be summed up to:
From there on, on every push to your Git repository, the Runner will
automagically start the pipeline and the pipeline will appear under the
project's `/pipelines` page.
project's **Pipelines** page.
---
This guide assumes that you:
- have a working GitLab instance of version 8.0 or higher or are using
- have a working GitLab instance of version 8.0+r or are using
[GitLab.com](https://gitlab.com)
- have a project in GitLab that you would like to use CI for
......@@ -54,7 +54,7 @@ The `.gitlab-ci.yml` file is where you configure what CI does with your project.
It lives in the root of your repository.
On any push to your repository, GitLab will look for the `.gitlab-ci.yml`
file and start builds on _Runners_ according to the contents of the file,
file and start jobs on _Runners_ according to the contents of the file,
for that commit.
Because `.gitlab-ci.yml` is in the repository and is version controlled, old
......@@ -63,11 +63,12 @@ have different pipelines and jobs, and you have a single source of truth for CI.
You can read more about the reasons why we are using `.gitlab-ci.yml` [in our
blog about it][blog-ci].
**Note:** `.gitlab-ci.yml` is a [YAML](https://en.wikipedia.org/wiki/YAML) file
so you have to pay extra attention to indentation. Always use spaces, not tabs.
### Creating a simple `.gitlab-ci.yml` file
>**Note:**
`.gitlab-ci.yml` is a [YAML](https://en.wikipedia.org/wiki/YAML) file
so you have to pay extra attention to indentation. Always use spaces, not tabs.
You need to create a file named `.gitlab-ci.yml` in the root directory of your
repository. Below is an example for a Ruby on Rails project.
......@@ -88,7 +89,7 @@ rubocop:
- bundle exec rubocop
```
This is the simplest possible build configuration that will work for most Ruby
This is the simplest possible configuration that will work for most Ruby
applications:
1. Define two jobs `rspec` and `rubocop` (the names are arbitrary) with
......@@ -98,22 +99,22 @@ applications:
The `.gitlab-ci.yml` file defines sets of jobs with constraints of how and when
they should be run. The jobs are defined as top-level elements with a name (in
our case `rspec` and `rubocop`) and always have to contain the `script` keyword.
Jobs are used to create builds, which are then picked by
Jobs are used to create jobs, which are then picked by
[Runners](../runners/README.md) and executed within the environment of the Runner.
What is important is that each job is run independently from each other.
If you want to check whether your `.gitlab-ci.yml` file is valid, there is a
Lint tool under the page `/ci/lint` of your GitLab instance. You can also find
a "CI Lint" button to go to this page under **Pipelines > Pipelines** and
**Pipelines > Builds** in your project.
a "CI Lint" button to go to this page under **Pipelines ➔ Pipelines** and
**Pipelines ➔ Jobs** in your project.
For more information and a complete `.gitlab-ci.yml` syntax, please read
[the documentation on .gitlab-ci.yml](../yaml/README.md).
[the reference documentation on .gitlab-ci.yml](../yaml/README.md).
### Push `.gitlab-ci.yml` to GitLab
Once you've created `.gitlab-ci.yml`, you should add it to your git repository
Once you've created `.gitlab-ci.yml`, you should add it to your Git repository
and push it to GitLab.
```bash
......@@ -125,28 +126,27 @@ git push origin master
Now if you go to the **Pipelines** page you will see that the pipeline is
pending.
You can also go to the **Commits** page and notice the little clock icon next
You can also go to the **Commits** page and notice the little pause icon next
to the commit SHA.
![New commit pending](img/new_commit.png)
Clicking on the clock icon you will be directed to the builds page for that
specific commit.
Clicking on it you will be directed to the jobs page for that specific commit.
![Single commit builds page](img/single_commit_status_pending.png)
![Single commit jobs page](img/single_commit_status_pending.png)
Notice that there are two jobs pending which are named after what we wrote in
`.gitlab-ci.yml`. The red triangle indicates that there is no Runner configured
yet for these builds.
yet for these jobs.
The next step is to configure a Runner so that it picks the pending builds.
The next step is to configure a Runner so that it picks the pending jobs.
## Configuring a Runner
In GitLab, Runners run the builds that you define in `.gitlab-ci.yml`. A Runner
In GitLab, Runners run the jobs that you define in `.gitlab-ci.yml`. A Runner
can be a virtual machine, a VPS, a bare-metal machine, a docker container or
even a cluster of containers. GitLab and the Runners communicate through an API,
so the only requirement is that the Runner's machine has Internet access.
so the only requirement is that the Runner's machine has [Internet] access.
A Runner can be specific to a certain project or serve multiple projects in
GitLab. If it serves all projects it's called a _Shared Runner_.
......@@ -155,9 +155,9 @@ Find more information about different Runners in the
[Runners](../runners/README.md) documentation.
You can find whether any Runners are assigned to your project by going to
**Settings > Runners**. Setting up a Runner is easy and straightforward. The
official Runner supported by GitLab is written in Go and can be found at
<https://gitlab.com/gitlab-org/gitlab-ci-multi-runner>.
**Settings ➔ Runners**. Setting up a Runner is easy and straightforward. The
official Runner supported by GitLab is written in Go and its documentation
can be found at <https://docs.gitlab.com/runner/>.
In order to have a functional Runner you need to follow two steps:
......@@ -167,28 +167,25 @@ In order to have a functional Runner you need to follow two steps:
Follow the links above to set up your own Runner or use a Shared Runner as
described in the next section.
For other types of unofficial Runners written in other languages, see the
[instructions for the various GitLab Runners](https://about.gitlab.com/gitlab-ci/#gitlab-runner).
Once the Runner has been set up, you should see it on the Runners page of your
project, following **Settings > Runners**.
project, following **Settings ➔ Runners**.
![Activated runners](img/runners_activated.png)
### Shared Runners
If you use [GitLab.com](https://gitlab.com/) you can use **Shared Runners**
If you use [GitLab.com](https://gitlab.com/) you can use the **Shared Runners**
provided by GitLab Inc.
These are special virtual machines that run on GitLab's infrastructure and can
build any project.
To enable **Shared Runners** you have to go to your project's
**Settings > Runners** and click **Enable shared runners**.
To enable the **Shared Runners** you have to go to your project's
**Settings ➔ Runners** and click **Enable shared runners**.
[Read more on Shared Runners](../runners/README.md).
## Seeing the status of your pipeline and builds
## Seeing the status of your pipeline and jobs
After configuring the Runner successfully, you should see the status of your
last commit change from _pending_ to either _running_, _success_ or _failed_.
......@@ -197,23 +194,23 @@ You can view all pipelines by going to the **Pipelines** page in your project.
![Commit status](img/pipelines_status.png)
Or you can view all builds, by going to the **Pipelines > Builds** page.
Or you can view all jobs, by going to the **Pipelines ➔ Jobs** page.
![Commit status](img/builds_status.png)
By clicking on a Build ID, you will be able to see the log of that build.
This is important to diagnose why a build failed or acted differently than
By clicking on a job's status, you will be able to see the log of that job.
This is important to diagnose why a job failed or acted differently than
you expected.
![Build log](img/build_log.png)
You are also able to view the status of any commit in the various pages in
GitLab, such as **Commits** and **Merge Requests**.
GitLab, such as **Commits** and **Merge requests**.
## Enabling build emails
If you want to receive e-mail notifications about the result status of the
builds, you should explicitly enable the **Builds Emails** service under your
jobs, you should explicitly enable the **Builds Emails** service under your
project's settings.
For more information read the
......@@ -224,9 +221,7 @@ For more information read the
Visit the [examples README][examples] to see a list of examples using GitLab
CI with various languages.
Awesome! You started using CI in GitLab!
[runner-install]: https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/tree/master#install-gitlab-runner
[runner-install]: https://docs.gitlab.com/runner/install/
[blog-ci]: https://about.gitlab.com/2015/05/06/why-were-replacing-gitlab-ci-jobs-with-gitlab-ci-dot-yml/
[examples]: ../examples/README.md
[ci]: https://about.gitlab.com/gitlab-ci/
......@@ -235,3 +230,4 @@ Awesome! You started using CI in GitLab!
[enabled]: ../enable_or_disable_ci.md
[stages]: ../yaml/README.md#stages
[pipeline]: ../pipelines.md
[internet]: https://about.gitlab.com/images/theinternet.png
doc/ci/quick_start/img/build_log.png
View replaced file @ 68be6738 View file @ 334a4093
doc/ci/quick_start/img/build_log.png

23.9 KB | W: | H:

doc/ci/quick_start/img/build_log.png

34.4 KB | W: | H:

doc/ci/quick_start/img/build_log.png
doc/ci/quick_start/img/build_log.png
doc/ci/quick_start/img/build_log.png
doc/ci/quick_start/img/build_log.png
  • 2-up
  • Swipe
  • Onion skin
doc/ci/quick_start/img/new_commit.png
View replaced file @ 68be6738 View file @ 334a4093
doc/ci/quick_start/img/new_commit.png

4.66 KB | W: | H:

doc/ci/quick_start/img/new_commit.png

5.45 KB | W: | H:

doc/ci/quick_start/img/new_commit.png
doc/ci/quick_start/img/new_commit.png
doc/ci/quick_start/img/new_commit.png
doc/ci/quick_start/img/new_commit.png
  • 2-up
  • Swipe
  • Onion skin
doc/ci/runners/README.md
View file @ 334a4093
This diff is collapsed.
doc/ci/services/mysql.md
View file @ 334a4093
......@@ -31,7 +31,7 @@ Database: el_duderino
```
If you are wondering why we used `mysql` for the `Host`, read more at
[How is service linked to the build](../docker/using_docker_images.md#how-is-service-linked-to-the-build).
[How is service linked to the job](../docker/using_docker_images.md#how-is-service-linked-to-the-job).
You can also use any other docker image available on [Docker Hub][hub-mysql].
For example, to use MySQL 5.5 the service becomes `mysql:5.5`.
......@@ -112,7 +112,7 @@ convenience that runs on [GitLab.com](https://gitlab.com) using our publicly
available [shared runners](../runners/README.md).
Want to hack on it? Simply fork it, commit and push your changes. Within a few
moments the changes will be picked by a public runner and the build will begin.
moments the changes will be picked by a public runner and the job will begin.
[hub-mysql]: https://hub.docker.com/r/_/mysql/
[mysql-example-repo]: https://gitlab.com/gitlab-examples/mysql
doc/ci/services/postgres.md
View file @ 334a4093
......@@ -31,7 +31,7 @@ Database: nice_marmot
```
If you are wondering why we used `postgres` for the `Host`, read more at
[How is service linked to the build](../docker/using_docker_images.md#how-is-service-linked-to-the-build).
[How is service linked to the job](../docker/using_docker_images.md#how-is-service-linked-to-the-job).
You can also use any other docker image available on [Docker Hub][hub-pg].
For example, to use PostgreSQL 9.3 the service becomes `postgres:9.3`.
......@@ -108,7 +108,7 @@ convenience that runs on [GitLab.com](https://gitlab.com) using our publicly
available [shared runners](../runners/README.md).
Want to hack on it? Simply fork it, commit and push your changes. Within a few
moments the changes will be picked by a public runner and the build will begin.
moments the changes will be picked by a public runner and the job will begin.
[hub-pg]: https://hub.docker.com/r/_/postgres/
[postgres-example-repo]: https://gitlab.com/gitlab-examples/postgres
doc/ci/services/redis.md
View file @ 334a4093
......@@ -63,7 +63,7 @@ that runs on [GitLab.com](https://gitlab.com) using our publicly available
[shared runners](../runners/README.md).
Want to hack on it? Simply fork it, commit and push your changes. Within a few
moments the changes will be picked by a public runner and the build will begin.
moments the changes will be picked by a public runner and the job will begin.
[hub-redis]: https://hub.docker.com/r/_/redis/
[redis-example-repo]: https://gitlab.com/gitlab-examples/redis
doc/ci/ssh_keys/README.md
View file @ 334a4093
......@@ -25,7 +25,7 @@ This is the universal solution which works with any type of executor
1. Create a new SSH key pair with [ssh-keygen][]
2. Add the private key as a **Secret Variable** to the project
3. Run the [ssh-agent][] during build to load the private key.
3. Run the [ssh-agent][] during job to load the private key.
## SSH keys when using the Docker executor
......@@ -77,7 +77,7 @@ SSH key.
You can generate the SSH key from the machine that GitLab Runner is installed
on, and use that key for all projects that are run on this machine.
First, you need to login to the server that runs your builds.
First, you need to login to the server that runs your jobs.
Then from the terminal login as the `gitlab-runner` user and generate the SSH
key pair as described in the [SSH keys documentation](../../ssh/README.md).
......@@ -103,7 +103,7 @@ that runs on [GitLab.com](https://gitlab.com) using our publicly available
[shared runners](../runners/README.md).
Want to hack on it? Simply fork it, commit and push your changes. Within a few
moments the changes will be picked by a public runner and the build will begin.
moments the changes will be picked by a public runner and the job will begin.
[ssh-keygen]: http://linux.die.net/man/1/ssh-keygen
[ssh-agent]: http://linux.die.net/man/1/ssh-agent
......
doc/ci/triggers/README.md
View file @ 334a4093
# Triggering Builds through the API
> [Introduced][ci-229] in GitLab CE 7.14.
# Triggering jobs through the API
> **Note**:
GitLab 8.12 has a completely redesigned build permissions system.
Read all about the [new model and its implications](../../user/project/new_ci_build_permissions_model.md#build-triggers).
- [Introduced][ci-229] in GitLab CE 7.14.
- GitLab 8.12 has a completely redesigned job permissions system. Read all
about the [new model and its implications](../../user/project/new_ci_build_permissions_model.md#job-triggers).
Triggers can be used to force a rebuild of a specific `ref` (branch or tag)
with an API call.
## Add a trigger
You can add a new trigger by going to your project's **Settings > Triggers**.
The **Add trigger** button will create a new token which you can then use to
trigger a rebuild of this particular project.
You can add a new trigger by going to your project's
**Settings ➔ CI/CD Pipelines ➔ Triggers**. The **Add trigger** button will
create a new token which you can then use to trigger a rerun of this
particular project's pipeline.
Every new trigger you create, gets assigned a different token which you can
then use inside your scripts or `.gitlab-ci.yml`. You also have a nice
......@@ -27,13 +27,13 @@ You can revoke a trigger any time by going at your project's
**Settings > Triggers** and hitting the **Revoke** button. The action is
irreversible.
## Trigger a build
## Trigger a job
> **Note**:
Valid refs are only the branches and tags. If you pass a commit SHA as a ref,
it will not trigger a build.
it will not trigger a job.
To trigger a build you need to send a `POST` request to GitLab's API endpoint:
To trigger a job you need to send a `POST` request to GitLab's API endpoint:
```
POST /projects/:id/trigger/builds
......@@ -42,31 +42,32 @@ POST /projects/:id/trigger/builds
The required parameters are the trigger's `token` and the Git `ref` on which
the trigger will be performed. Valid refs are the branch and the tag. The `:id`
of a project can be found by [querying the API](../../api/projects.md)
or by visiting the **Triggers** page which provides self-explanatory examples.
or by visiting the **CI/CD Pipelines** settings page which provides
self-explanatory examples.
When a rebuild is triggered, the information is exposed in GitLab's UI under
the **Builds** page and the builds are marked as `triggered`.
When a rerun of a pipeline is triggered, the information is exposed in GitLab's
UI under the **Jobs** page and the jobs are marked as triggered 'by API'.
![Marked rebuilds as triggered on builds page](img/builds_page.png)
![Marked rebuilds as on jobs page](img/builds_page.png)
---
You can see which trigger caused the rebuild by visiting the single build page.
The token of the trigger is exposed in the UI as you can see from the image
You can see which trigger caused the rebuild by visiting the single job page.
A part of the trigger's token is exposed in the UI as you can see from the image
below.
![Marked rebuilds as triggered on a single build page](img/trigger_single_build.png)
![Marked rebuilds as triggered on a single job page](img/trigger_single_build.png)
---
See the [Examples](#examples) section for more details on how to actually
trigger a rebuild.
## Trigger a build from webhook
## Trigger a job from webhook
> Introduced in GitLab 8.14.
To trigger a build from webhook of another project you need to add the following
To trigger a job from webhook of another project you need to add the following
webhook url for Push and Tag push events:
```
......@@ -78,7 +79,7 @@ https://gitlab.example.com/api/v3/projects/:id/ref/:ref/trigger/builds?token=TOK
from webhook body that designates the branchref that fired the trigger in the source repository.
- `ref` should be url encoded if contains slashes.
## Pass build variables to a trigger
## Pass job variables to a trigger
You can pass any number of arbitrary variables in the trigger API call and they
will be available in GitLab CI so that they can be used in your `.gitlab-ci.yml`
......@@ -90,7 +91,7 @@ variables[key]=value
This information is also exposed in the UI.
![Build variables in UI](img/trigger_variables.png)
![Job variables in UI](img/trigger_variables.png)
---
......@@ -116,7 +117,7 @@ curl --request POST \
"https://gitlab.example.com/api/v3/projects/9/trigger/builds?token=TOKEN&ref=master"
```
### Triggering a build within `.gitlab-ci.yml`
### Triggering a job within `.gitlab-ci.yml`
You can also benefit by using triggers in your `.gitlab-ci.yml`. Let's say that
you have two projects, A and B, and you want to trigger a rebuild on the `master`
......@@ -132,7 +133,7 @@ build_docs:
- tags
```
Now, whenever a new tag is pushed on project A, the build will run and the
Now, whenever a new tag is pushed on project A, the job will run and the
`build_docs` job will be executed, triggering a rebuild of project B. The
`stage: deploy` ensures that this job will run only after all jobs with
`stage: test` complete successfully.
......@@ -189,18 +190,18 @@ curl --request POST \
https://gitlab.example.com/api/v3/projects/9/trigger/builds
```
### Using webhook to trigger builds
### Using webhook to trigger job
You can add the following webhook to another project in order to trigger a build:
You can add the following webhook to another project in order to trigger a job:
```
https://gitlab.example.com/api/v3/projects/9/ref/master/trigger/builds?token=TOKEN&variables[UPLOAD_TO_S3]=true
```
### Using cron to trigger nightly builds
### Using cron to trigger nightly jobs
Whether you craft a script or just run cURL directly, you can trigger builds
in conjunction with cron. The example below triggers a build on the `master`
Whether you craft a script or just run cURL directly, you can trigger jobs
in conjunction with cron. The example below triggers a job on the `master`
branch of project with ID `9` every night at `00:30`:
```bash
......
doc/ci/triggers/img/builds_page.png
View replaced file @ 68be6738 View file @ 334a4093
doc/ci/triggers/img/builds_page.png

28.4 KB | W: | H:

doc/ci/triggers/img/builds_page.png

19.9 KB | W: | H:

doc/ci/triggers/img/builds_page.png
doc/ci/triggers/img/builds_page.png
doc/ci/triggers/img/builds_page.png
doc/ci/triggers/img/builds_page.png
  • 2-up
  • Swipe
  • Onion skin
doc/ci/variables/README.md
View file @ 334a4093
This diff is collapsed.
doc/ci/yaml/README.md
View file @ 334a4093
This diff is collapsed.
doc/development/code_review.md
View file @ 334a4093
......@@ -69,7 +69,7 @@ experience, refactors the existing code). Then:
someone else would be confused by it as well.
- After a round of line notes, it can be helpful to post a summary note such as
"LGTM :thumbsup:", or "Just a couple things to address."
- Avoid accepting a merge request before the build succeeds. Of course, "Merge
- Avoid accepting a merge request before the job succeeds. Of course, "Merge
When Pipeline Succeeds" (MWPS) is fine.
- If you set the MR to "Merge When Pipeline Succeeds", you should take over
subsequent revisions for anything that would be spotted after that.
......
doc/install/installation.md
View file @ 334a4093
......@@ -307,7 +307,7 @@ sudo usermod -aG redis git
# now that files in public/uploads are served by gitlab-workhorse
sudo chmod 0700 public/uploads
# Change the permissions of the directory where CI build traces are stored
# Change the permissions of the directory where CI job traces are stored
sudo chmod -R u+rwX builds/
# Change the permissions of the directory where CI artifacts are stored
......
doc/raketasks/backup_restore.md
View file @ 334a4093
......@@ -44,8 +44,8 @@ environment variable `SKIP`. You can skip:
- `db` (database)
- `uploads` (attachments)
- `repositories` (Git repositories data)
- `builds` (CI build output logs)
- `artifacts` (CI build artifacts)
- `builds` (CI job output logs)
- `artifacts` (CI job artifacts)
- `lfs` (LFS objects)
- `registry` (Container Registry images)
......
doc/university/glossary/README.md
View file @ 334a4093
......@@ -65,8 +65,8 @@ A branch is a parallel version of a repository. This allows you to work on the r
Having your own logo on [your GitLab instance login page](https://docs.gitlab.com/ee/customization/branded_login_page.html) instead of the GitLab logo.
### Build triggers
These protect your code base against breaks, for instance when a team is working on the same project. Learn about [setting up](https://docs.gitlab.com/ce/ci/triggers/README.html) build triggers.
### Job triggers
These protect your code base against breaks, for instance when a team is working on the same project. Learn about [setting up](https://docs.gitlab.com/ce/ci/triggers/README.html) job triggers.
### CEPH
......
doc/user/admin_area/settings/continuous_integration.md
View file @ 334a4093
......@@ -2,9 +2,9 @@
## Maximum artifacts size
The maximum size of the [build artifacts][art-yml] can be set in the Admin area
The maximum size of the [job artifacts][art-yml] can be set in the Admin area
of your GitLab instance. The value is in MB and the default is 100MB. Note that
this setting is set for each build.
this setting is set for each job.
1. Go to the **Admin area ➔ Settings** (`/admin/application_settings`).
......@@ -70,5 +70,5 @@ the group.
![Group pipelines quota](img/group_pipelines_quota.png)
[art-yml]: ../../../administration/build_artifacts.md
[art-yml]: ../../../administration/job_artifacts.md
[ee-1078]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/1078
doc/user/permissions.md
View file @ 334a4093
......@@ -22,9 +22,9 @@ The following table depicts the various user permission levels in a project.
| Create confidential issue | ✓ | ✓ | ✓ | ✓ | ✓ |
| View confidential issues | (✓) [^1] | ✓ | ✓ | ✓ | ✓ |
| Leave comments | ✓ | ✓ | ✓ | ✓ | ✓ |
| See a list of builds | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| See a build log | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| Download and browse build artifacts | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| See a list of jobs | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| See a job log | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| Download and browse job artifacts | ✓ [^2] | ✓ | ✓ | ✓ | ✓ |
| View wiki pages | ✓ | ✓ | ✓ | ✓ | ✓ |
| Pull project code | | ✓ | ✓ | ✓ | ✓ |
| Download project | | ✓ | ✓ | ✓ | ✓ |
......@@ -46,7 +46,7 @@ The following table depicts the various user permission levels in a project.
| Remove non-protected branches | | | ✓ | ✓ | ✓ |
| Add tags | | | ✓ | ✓ | ✓ |
| Write a wiki | | | ✓ | ✓ | ✓ |
| Cancel and retry builds | | | ✓ | ✓ | ✓ |
| Cancel and retry jobs | | | ✓ | ✓ | ✓ |
| Create or update commit status | | | ✓ | ✓ | ✓ |
| Update a container registry | | | ✓ | ✓ | ✓ |
| Remove a container registry image | | | ✓ | ✓ | ✓ |
......@@ -60,7 +60,7 @@ The following table depicts the various user permission levels in a project.
| Add deploy keys to project | | | | ✓ | ✓ |
| Configure project hooks | | | | ✓ | ✓ |
| Manage runners | | | | ✓ | ✓ |
| Manage build triggers | | | | ✓ | ✓ |
| Manage job triggers | | | | ✓ | ✓ |
| Manage variables | | | | ✓ | ✓ |
| Manage pages | | | | ✓ | ✓ |
| Manage pages domains and certificates | | | | ✓ | ✓ |
......@@ -134,8 +134,8 @@ instance and project. In addition, all admins can use the admin interface under
| Action | Guest, Reporter | Developer | Master | Admin |
|---------------------------------------|-----------------|-------------|----------|--------|
| See commits and builds | ✓ | ✓ | ✓ | ✓ |
| Retry or cancel build | | ✓ | ✓ | ✓ |
| See commits and jobs | ✓ | ✓ | ✓ | ✓ |
| Retry or cancel job | | ✓ | ✓ | ✓ |
| Remove project | | | ✓ | ✓ |
| Create project | | | ✓ | ✓ |
| Change project configuration | | | ✓ | ✓ |
......@@ -144,18 +144,18 @@ instance and project. In addition, all admins can use the admin interface under
| See events in the system | | | | ✓ |
| Admin interface | | | | ✓ |
### Builds permissions
### Jobs permissions
>**Note:**
GitLab 8.12 has a completely redesigned build permissions system.
GitLab 8.12 has a completely redesigned job permissions system.
Read all about the [new model and its implications][new-mod].
This table shows granted privileges for builds triggered by specific types of
This table shows granted privileges for jobs triggered by specific types of
users:
| Action | Guest, Reporter | Developer | Master | Admin |
|---------------------------------------------|-----------------|-------------|----------|--------|
| Run CI build | | ✓ | ✓ | ✓ |
| Run CI job | | ✓ | ✓ | ✓ |
| Clone source and LFS from current project | | ✓ | ✓ | ✓ |
| Clone source and LFS from public projects | | ✓ | ✓ | ✓ |
| Clone source and LFS from internal projects | | ✓ [^4] | ✓ [^4] | ✓ |
......
doc/user/project/builds/artifacts.md
View file @ 334a4093
# Introduction to build artifacts
>**Notes:**
>- Since GitLab 8.2 and GitLab Runner 0.7.0, build artifacts that are created by
GitLab Runner are uploaded to GitLab and are downloadable as a single archive
(`tar.gz`) using the GitLab UI.
>- Starting from GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format
changed to `ZIP`, and it is now possible to browse its contents, with the added
ability of downloading the files separately.
>- The artifacts browser will be available only for new artifacts that are sent
to GitLab using GitLab Runner version 1.0 and up. It will not be possible to
browse old artifacts already uploaded to GitLab.
>- This is the user documentation. For the administration guide see
[administration/build_artifacts.md](../../../administration/build_artifacts.md).
Artifacts is a list of files and directories which are attached to a build
after it completes successfully. This feature is enabled by default in all GitLab installations.
## Defining artifacts in `.gitlab-ci.yml`
A simple example of using the artifacts definition in `.gitlab-ci.yml` would be
the following:
```yaml
pdf:
script: xelatex mycv.tex
artifacts:
paths:
- mycv.pdf
```
A job named `pdf` calls the `xelatex` command in order to build a pdf file from
the latex source file `mycv.tex`. We then define the `artifacts` paths which in
turn are defined with the `paths` keyword. All paths to files and directories
are relative to the repository that was cloned during the build.
For more examples on artifacts, follow the artifacts reference in
[`.gitlab-ci.yml` documentation](../../../ci/yaml/README.md#artifacts).
## Browsing build artifacts
When GitLab receives an artifacts archive, an archive metadata file is also
generated. This metadata file describes all the entries that are located in the
artifacts archive itself. The metadata file is in a binary format, with
additional GZIP compression.
GitLab does not extract the artifacts archive in order to save space, memory
and disk I/O. It instead inspects the metadata file which contains all the
relevant information. This is especially important when there is a lot of
artifacts, or an archive is a very large file.
---
After a build finishes, if you visit the build's specific page, you can see
that there are two buttons. One is for downloading the artifacts archive and
the other for browsing its contents.
![Build artifacts browser button](img/build_artifacts_browser_button.png)
---
The archive browser shows the name and the actual file size of each file in the
archive. If your artifacts contained directories, then you are also able to
browse inside them.
Below you can see how browsing looks like. In this case we have browsed inside
the archive and at this point there is one directory and one HTML file.
![Build artifacts browser](img/build_artifacts_browser.png)
---
## Downloading build artifacts
>**Note:**
GitLab does not extract the entire artifacts archive to send just a single file
to the user. When clicking on a specific file, [GitLab Workhorse] extracts it
from the archive and the download begins. This implementation saves space,
memory and disk I/O.
If you need to download the whole archive, there are buttons in various places
inside GitLab that make that possible.
1. While on the pipelines page, you can see the download icon for each build's
artifacts archive in the right corner:
![Build artifacts in Pipelines page](img/build_artifacts_pipelines_page.png)
1. While on the builds page, you can see the download icon for each build's
artifacts archive in the right corner:
![Build artifacts in Builds page](img/build_artifacts_builds_page.png)
1. While inside a specific build, you are presented with a download button
along with the one that browses the archive:
![Build artifacts browser button](img/build_artifacts_browser_button.png)
1. And finally, when browsing an archive you can see the download button at
the top right corner:
![Build artifacts browser](img/build_artifacts_browser.png)
## Downloading the latest build artifacts
It is possible to download the latest artifacts of a build via a well known URL
so you can use it for scripting purposes.
The structure of the URL is the following:
```
https://example.com/<namespace>/<project>/builds/artifacts/<ref>/download?job=<job_name>
```
For example, to download the latest artifacts of the job named `rspec 6 20` of
the `master` branch of the `gitlab-ce` project that belongs to the `gitlab-org`
namespace, the URL would be:
```
https://gitlab.com/gitlab-org/gitlab-ce/builds/artifacts/master/download?job=rspec+6+20
```
The latest builds are also exposed in the UI in various places. Specifically,
look for the download button in:
- the main project's page
- the branches page
- the tags page
If the latest build has failed to upload the artifacts, you can see that
information in the UI.
![Latest artifacts button](img/build_latest_artifacts_browser.png)
[gitlab workhorse]: https://gitlab.com/gitlab-org/gitlab-workhorse "GitLab Workhorse repository"
This document was moved to [pipelines/job_artifacts](../pipelines/job_artifacts.md).
doc/user/project/integrations/webhooks.md
View file @ 334a4093
......@@ -11,7 +11,7 @@ a new issue is created. You can configure webhooks to listen for specific events
like pushes, issues or merge requests. GitLab will send a POST request with data
to the webhook URL.
Webhooks can be used to update an external issue tracker, trigger CI builds,
Webhooks can be used to update an external issue tracker, trigger CI jobs,
update a backup mirror, or even deploy to your production server.
Navigate to the webhooks page by going to the **Integrations** page from your
......
doc/user/project/merge_requests/index.md
View file @ 334a4093
......@@ -22,7 +22,7 @@ in a merged merge requests or a commit.
## Merge when pipeline succeeds
When reviewing a merge request that looks ready to merge but still has one or
more CI builds running, you can set it to be merged automatically when CI
more CI jobs running, you can set it to be merged automatically when CI
pipeline succeeds. This way, you don't have to wait for the pipeline to finish
and remember to merge the request manually.
......
doc/user/project/merge_requests/merge_when_pipeline_succeeds.md
View file @ 334a4093
# Merge When Pipeline Succeeds
When reviewing a merge request that looks ready to merge but still has one or
more CI builds running, you can set it to be merged automatically when the
builds pipeline succeeds. This way, you don't have to wait for the builds to
more CI jobs running, you can set it to be merged automatically when the
jobs pipeline succeeds. This way, you don't have to wait for the jobs to
finish and remember to merge the request manually.
![Enable](img/merge_when_build_succeeds_enable.png)
......@@ -19,10 +19,10 @@ after all.
![Status](img/merge_when_build_succeeds_status.png)
When the pipeline succeeds, the merge request will automatically be merged.
When the pipeline fails, the author gets a chance to retry any failed builds,
When the pipeline fails, the author gets a chance to retry any failed jobs,
or to push new commits to fix the failure.
When the builds are retried and succeed on the second try, the merge request
When the jobs are retried and succeed on the second try, the merge request
will automatically be merged after all. When the merge request is updated with
new commits, the automatic merge is automatically canceled to allow the new
changes to be reviewed.
......@@ -30,7 +30,7 @@ changes to be reviewed.
## Only allow merge requests to be merged if the pipeline succeeds
> **Note:**
You need to have builds configured to enable this feature.
You need to have jobs configured to enable this feature.
You can prevent merge requests from being merged if their pipeline did not succeed.
......@@ -41,6 +41,6 @@ hit **Save** for the changes to take effect.
![Only allow merge if pipeline succeeds settings](img/merge_when_build_succeeds_only_if_succeeds_settings.png)
From now on, every time the pipeline fails you will not be able to merge the
merge request from the UI, until you make all relevant builds pass.
merge request from the UI, until you make all relevant jobs pass.
![Only allow merge if pipeline succeeds message](img/merge_when_build_succeeds_only_if_succeeds_msg.png)
doc/user/project/pages/index.md
View file @ 334a4093
......@@ -100,7 +100,7 @@ whereas a group's project under `http(s)://groupname.example.io/projectname`.
The key thing about GitLab Pages is the `.gitlab-ci.yml` file, something that
gives you absolute control over the build process. You can actually watch your
website being built live by following the CI build traces.
website being built live by following the CI job traces.
> **Note:**
> Before reading this section, make sure you familiarize yourself with GitLab CI
......@@ -127,7 +127,7 @@ pages:
```
When the Runner reaches to build the `pages` job, it executes whatever is
defined in the `script` parameter and if the build completes with a non-zero
defined in the `script` parameter and if the job completes with a non-zero
exit status, it then uploads the `public/` directory to GitLab Pages.
The `public/` directory should contain all the static content of your website.
......@@ -211,11 +211,11 @@ pages: # the build job must be named pages
```
Here, we used the Docker executor and in the first line we specified the base
image against which our builds will run.
image against which our jobs will run.
You have to make sure that the generated static files are ultimately placed
under the `public` directory, that's why in the `script` section we run the
`jekyll` command that builds the website and puts all content in the `public/`
`jekyll` command that jobs the website and puts all content in the `public/`
directory. Depending on the static generator of your choice, this command will
differ. Search in the documentation of the static generator you will use if
there is an option to explicitly set the output directory. If there is not
......@@ -403,7 +403,7 @@ don't have to create and edit HTML files manually. For example, Jekyll has the
### Can I download my generated pages?
Sure. All you need to do is download the artifacts archive from the build page.
Sure. All you need to do is download the artifacts archive from the job page.
### Can I use GitLab Pages if my project is private?
......
doc/user/project/pipelines/job_artifacts.md 0 → 100644
View file @ 334a4093
# Introduction to job artifacts
>**Notes:**
>- Since GitLab 8.2 and GitLab Runner 0.7.0, job artifacts that are created by
GitLab Runner are uploaded to GitLab and are downloadable as a single archive
(`tar.gz`) using the GitLab UI.
>- Starting with GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format
changed to `ZIP`, and it is now possible to browse its contents, with the added
ability of downloading the files separately.
>- Starting with GitLab 8.17, builds are renamed to jobs.
>- The artifacts browser will be available only for new artifacts that are sent
to GitLab using GitLab Runner version 1.0 and up. It will not be possible to
browse old artifacts already uploaded to GitLab.
>- This is the user documentation. For the administration guide see
[administration/job_artifacts.md](../../../administration/job_artifacts.md).
Artifacts is a list of files and directories which are attached to a job
after it completes successfully. This feature is enabled by default in all
GitLab installations.
## Defining artifacts in `.gitlab-ci.yml`
A simple example of using the artifacts definition in `.gitlab-ci.yml` would be
the following:
```yaml
pdf:
script: xelatex mycv.tex
artifacts:
paths:
- mycv.pdf
```
A job named `pdf` calls the `xelatex` command in order to build a pdf file from
the latex source file `mycv.tex`. We then define the `artifacts` paths which in
turn are defined with the `paths` keyword. All paths to files and directories
are relative to the repository that was cloned during the build.
For more examples on artifacts, follow the artifacts reference in
[`.gitlab-ci.yml` documentation](../../../ci/yaml/README.md#artifacts).
## Browsing job artifacts
After a job finishes, if you visit the job's specific page, you can see
that there are two buttons. One is for downloading the artifacts archive and
the other for browsing its contents.
![Job artifacts browser button](img/job_artifacts_browser_button.png)
---
The archive browser shows the name and the actual file size of each file in the
archive. If your artifacts contained directories, then you are also able to
browse inside them.
Below you can see how browsing looks like. In this case we have browsed inside
the archive and at this point there is one directory and one HTML file.
![Job artifacts browser](img/job_artifacts_browser.png)
---
## Downloading job artifacts
If you need to download the whole archive, there are buttons in various places
inside GitLab that make that possible.
1. While on the pipelines page, you can see the download icon for each job's
artifacts archive in the right corner:
![Job artifacts in Pipelines page](img/job_artifacts_pipelines_page.png)
1. While on the **Jobs** page, you can see the download icon for each job's
artifacts archive in the right corner:
![Job artifacts in Builds page](img/job_artifacts_builds_page.png)
1. While inside a specific job, you are presented with a download button
along with the one that browses the archive:
![Job artifacts browser button](img/job_artifacts_browser_button.png)
1. And finally, when browsing an archive you can see the download button at
the top right corner:
![Job artifacts browser](img/job_artifacts_browser.png)
## Downloading the latest job artifacts
It is possible to download the latest artifacts of a job via a well known URL
so you can use it for scripting purposes.
The structure of the URL is the following:
```
https://example.com/<namespace>/<project>/builds/artifacts/<ref>/download?job=<job_name>
```
For example, to download the latest artifacts of the job named `rspec 6 20` of
the `master` branch of the `gitlab-ce` project that belongs to the `gitlab-org`
namespace, the URL would be:
```
https://gitlab.com/gitlab-org/gitlab-ce/builds/artifacts/master/download?job=rspec+6+20
```
The latest builds are also exposed in the UI in various places. Specifically,
look for the download button in:
- the main project's page
- the branches page
- the tags page
If the latest job has failed to upload the artifacts, you can see that
information in the UI.
![Latest artifacts button](img/job_latest_artifacts_browser.png)
doc/user/project/pipelines/settings.md
View file @ 334a4093
......@@ -35,7 +35,7 @@ if the job surpasses the threshold, it is marked as failed.
## Test coverage parsing
If you use test coverage in your code, GitLab can capture its output in the
build log using a regular expression. In the pipelines settings, search for the
job log using a regular expression. In the pipelines settings, search for the
"Test coverage parsing" section.
![Pipelines settings test coverage](img/pipelines_settings_test_coverage.png)
......@@ -44,7 +44,7 @@ Leave blank if you want to disable it or enter a ruby regular expression. You
can use http://rubular.com to test your regex.
If the pipeline succeeds, the coverage is shown in the merge request widget and
in the builds table.
in the jobs table.
![MR widget coverage](img/pipelines_test_coverage_mr_widget.png)
......@@ -62,9 +62,9 @@ pipelines** checkbox and save the changes.
## Badges
In the pipelines settings page you can find build status and test coverage
In the pipelines settings page you can find job status and test coverage
badges for your project. The latest successful pipeline will be used to read
the build status and test coverage values.
the job status and test coverage values.
Visit the pipelines settings page in your project to see the exact link to
your badges, as well as ways to embed the badge image in your HTML or Markdown
......@@ -72,9 +72,9 @@ pages.
![Pipelines badges](img/pipelines_settings_badges.png)
### Build status badge
### Job status badge
Depending on the status of your build, a badge can have the following values:
Depending on the status of your job, a badge can have the following values:
- running
- success
......@@ -82,7 +82,7 @@ Depending on the status of your build, a badge can have the following values:
- skipped
- unknown
You can access a build status badge image using the following link:
You can access a job status badge image using the following link:
```
https://example.gitlab.com/<namespace>/<project>/badges/<branch>/build.svg
......@@ -91,7 +91,7 @@ https://example.gitlab.com/<namespace>/<project>/badges/<branch>/build.svg
### Test coverage report badge
GitLab makes it possible to define the regular expression for [coverage report],
that each build log will be matched against. This means that each build in the
that each job log will be matched against. This means that each job in the
pipeline can have the test coverage percentage value defined.
The test coverage badge can be accessed using following link:
......
doc/user/project/slash_commands.md
View file @ 334a4093
......@@ -14,7 +14,7 @@ do.
|:---------------------------|:-------------|
| `/close` | Close the issue or merge request |
| `/reopen` | Reopen the issue or merge request |
| `/merge` | Merge (when build succeeds) |
| `/merge` | Merge (when pipeline succeeds) |
| `/title <New title>` | Change title |
| `/assign @username` | Assign |
| `/unassign` | Remove assignee |
......
doc/workflow/shortcuts.md
View file @ 334a4093
......@@ -45,7 +45,7 @@ You can see GitLab's keyboard shortcuts by using 'shift + ?'
| <kbd>g</kbd> + <kbd>e</kbd> | Go to the project's activity feed |
| <kbd>g</kbd> + <kbd>f</kbd> | Go to files |
| <kbd>g</kbd> + <kbd>c</kbd> | Go to commits |
| <kbd>g</kbd> + <kbd>b</kbd> | Go to builds |
| <kbd>g</kbd> + <kbd>b</kbd> | Go to jobs |
| <kbd>g</kbd> + <kbd>n</kbd> | Go to network graph |
| <kbd>g</kbd> + <kbd>g</kbd> | Go to graphs |
| <kbd>g</kbd> + <kbd>i</kbd> | Go to issues |
......
doc/workflow/todos.md
View file @ 334a4093
......@@ -27,8 +27,8 @@ A Todo appears in your Todos dashboard when:
- an issue or merge request is assigned to you,
- you are `@mentioned` in an issue or merge request, be it the description of
the issue/merge request or in a comment,
- build in the CI pipeline running for your merge request failed, but this
build is not allowed to fail.
- a job in the CI pipeline running for your merge request failed, but this
job is not allowed to fail.
>**Note:** Commenting on a commit will _not_ trigger a Todo.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7