If ABTS cannot be completed in target mode, the driver attempts to free
related management command and crashes:

  NIP [d000000019181ee8] tcm_qla2xxx_free_mcmd+0x40/0x80 [tcm_qla2xxx]
  LR [d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx]
  Call Trace:
  [c000003fff27bb50] [c000003fff27bc10] 0xc000003fff27bc10 (unreliable)
  [c000003fff27bb70] [d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx]
  [c000003fff27bc10] [d00000001dbc2be0] qla24xx_process_response_queue+0x5d8/0xbd0 [qla2xxx]
  [c000003fff27bd50] [d00000001dbc632c] qla24xx_msix_rsp_q+0x64/0x150 [qla2xxx]
  [c000003fff27bde0] [c000000000187200] __handle_irq_event_percpu+0x90/0x310
  [c000003fff27bea0] [c0000000001874b8] handle_irq_event_percpu+0x38/0x90
  [c000003fff27bee0] [c000000000187574] handle_irq_event+0x64/0xb0
  [c000003fff27bf10] [c00000000018cd38] handle_fasteoi_irq+0xe8/0x280
  [c000003fff27bf40] [c000000000185ccc] generic_handle_irq+0x4c/0x70
  [c000003fff27bf60] [c000000000016cec] __do_irq+0x7c/0x1d0
  [c000003fff27bf90] [c00000000002a530] call_do_irq+0x14/0x24
  [c00000207d2cba90] [c000000000016edc] do_IRQ+0x9c/0x130
  [c00000207d2cbae0] [c000000000008bf4] hardware_interrupt_common+0x114/0x120
  --- interrupt: 501 at arch_local_irq_restore+0x74/0x90
      LR = arch_local_irq_restore+0x74/0x90
  [c00000207d2cbdd0] [c0000000001c64fc] tick_broadcast_oneshot_control+0x4c/0x60 (unreliable)
  [c00000207d2cbdf0] [c0000000007ac840] cpuidle_enter_state+0xf0/0x450
  [c00000207d2cbe50] [c00000000016b81c] call_cpuidle+0x4c/0x90
  [c00000207d2cbe70] [c00000000016bc30] do_idle+0x2b0/0x330
  [c00000207d2cbec0] [c00000000016beec] cpu_startup_entry+0x3c/0x50
  [c00000207d2cbef0] [c00000000004a06c] start_secondary+0x63c/0x670
  [c00000207d2cbf90] [c00000000000aa6c] start_secondary_prolog+0x10/0x14

The crash can be triggered by ACL deletion when there's active I/O.

During ACL deletion, qla2xxx performs implicit LOGO that's invisible for
the initiator. Only the driver and firmware are aware of the logout.
Therefore the initiator continues to send SCSI commands and the target
always responds with SAM STATUS BUSY as it can't find the session.

The command times out after a while and initiator invokes ABORT TASK TMF
for the command. The TMF is mapped to ABTS-LS in FCP. The target can't find
session for S_ID originating ABTS-LS so it never allocates mcmd.  And since
N_Port handle was deleted after LOGO, it is no longer valid and ABTS
Response IOCB is returned from firmware with status 31. Then free_mcmd is
invoked on NULL pointer and the kernel crashes.

[ 7734.578642] qla2xxx [0000:00:0c.0]-e837:6: ABTS_RECV_24XX: instance 0
[ 7734.578644] qla2xxx [0000:00:0c.0]-f811:6: qla_target(0): task abort (s_id=1:2:0, tag=1209504, param=0)
[ 7734.578645] find_sess_by_s_id: 0x010200
[ 7734.578645] Unable to locate s_id: 0x010200
[ 7734.578646] qla2xxx [0000:00:0c.0]-f812:6: qla_target(0): task abort for non-existent session
[ 7734.578648] qla2xxx [0000:00:0c.0]-e806:6: Sending task mgmt ABTS response (ha=c0000000d5819000, atio=c0000000d3fd4700, status=4
[ 7734.578730] qla2xxx [0000:00:0c.0]-e838:6: ABTS_RESP_24XX: compl_status 31
[ 7734.578732] qla2xxx [0000:00:0c.0]-e863:6: qla_target(0): ABTS_RESP_24XX failed 31 (subcode 19:a)
[ 7734.578740] Unable to handle kernel paging request for data at address 0x00000200

Fixes: 6b0431d6 ("scsi: qla2xxx: Fix out of order Termination and ABTS response")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Thomas Abraham <tabraham@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191125165702.1013-2-r.bolshakov@yadro.comAcked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>