drm/i915/hsw, bdw: Add irq_pipe_mask, has_vga power well attributes

The pattern of a power well backing a set of pipe IRQ or VGA
functionality applies to all HSW+ platforms. Using power well attributes
instead of platform checks to decide whether to init/reset pipe IRQs and
VGA correspondingly is cleaner and it allows us to unify the HSW/BDW and
GEN9+ power well code in follow-up patches.

Also use u8 for pipe_mask in related helpers to match the type in the
power well struct.

v2:
- Use u8 instead of u32 for irq_pipe_mask. (Ville)

v3:
- Use u8 for pipe_mask in related helpers too for clarity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170712155413.29839-1-imre.deak@intel.comSigned-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -1392,6 +1392,12 @@ struct i915_power_well {
 		struct {
 			enum dpio_phy phy;
 		} bxt;
+		struct {
+			/* Mask of pipes whose IRQ logic is backed by the pw */
+			u8 irq_pipe_mask;
+			/* The pw is backing the VGA functionality */
+			bool has_vga:1;
+		} hsw;
 	};
 	const struct i915_power_well_ops *ops;
 };

drivers/gpu/drm/i915/i915_irq.c

@@ -3038,7 +3038,7 @@ static void gen8_irq_reset(struct drm_device *dev)
 }
 
 void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
-				     unsigned int pipe_mask)
+				     u8 pipe_mask)
 {
 	uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN;
 	enum pipe pipe;
@@ -3052,7 +3052,7 @@ void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
 }
 
 void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv,
-				     unsigned int pipe_mask)
+				     u8 pipe_mask)
 {
 	enum pipe pipe;
 

drivers/gpu/drm/i915/intel_drv.h

@@ -1230,9 +1230,9 @@ static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
 
 int intel_get_crtc_scanline(struct intel_crtc *crtc);
 void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
-				     unsigned int pipe_mask);
+				     u8 pipe_mask);
 void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv,
-				     unsigned int pipe_mask);
+				     u8 pipe_mask);
 void gen9_reset_guc_interrupts(struct drm_i915_private *dev_priv);
 void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv);
 void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -281,7 +281,8 @@ void intel_display_set_init_power(struct drm_i915_private *dev_priv,
  * to be enabled, and it will only be disabled if none of the registers is
  * requesting it to be enabled.
  */
-static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv,
+				       u8 irq_pipe_mask, bool has_vga)
 {
 	struct pci_dev *pdev = dev_priv->drm.pdev;
 
@@ -295,20 +296,21 @@ static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
 	 * sure vgacon can keep working normally without triggering interrupts
 	 * and error messages.
 	 */
-	vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
-	outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
-	vga_put(pdev, VGA_RSRC_LEGACY_IO);
+	if (has_vga) {
+		vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
+		outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
+		vga_put(pdev, VGA_RSRC_LEGACY_IO);
+	}
 
-	if (IS_BROADWELL(dev_priv))
-		gen8_irq_power_well_post_enable(dev_priv,
-						1 << PIPE_C | 1 << PIPE_B);
+	if (irq_pipe_mask)
+		gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask);
 }
 
-static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv)
+static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
+				       u8 irq_pipe_mask)
 {
-	if (IS_BROADWELL(dev_priv))
-		gen8_irq_power_well_pre_disable(dev_priv,
-						1 << PIPE_C | 1 << PIPE_B);
+	if (irq_pipe_mask)
+		gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
 }
 
 static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
@@ -413,7 +415,9 @@ static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
 				    HSW_PWR_WELL_CTL_STATE(id),
 				    20))
 		DRM_ERROR("Timeout enabling power well\n");
-	hsw_power_well_post_enable(dev_priv);
+
+	hsw_power_well_post_enable(dev_priv, power_well->hsw.irq_pipe_mask,
+				   power_well->hsw.has_vga);
 }
 
 static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
@@ -422,7 +426,8 @@ static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
 	enum i915_power_well_id id = power_well->id;
 	u32 val;
 
-	hsw_power_well_pre_disable(dev_priv);
+	hsw_power_well_pre_disable(dev_priv, power_well->hsw.irq_pipe_mask);
+
 	val = I915_READ(HSW_PWR_WELL_DRIVER);
 	I915_WRITE(HSW_PWR_WELL_DRIVER, val & ~HSW_PWR_WELL_CTL_REQ(id));
 	POSTING_READ(HSW_PWR_WELL_DRIVER);
@@ -2057,6 +2062,7 @@ static struct i915_power_well hsw_power_wells[] = {
 		.domains = HSW_DISPLAY_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
 		.id = HSW_DISP_PW_GLOBAL,
+		.hsw.has_vga = true,
 	},
 };
 
@@ -2073,6 +2079,8 @@ static struct i915_power_well bdw_power_wells[] = {
 		.domains = BDW_DISPLAY_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
 		.id = HSW_DISP_PW_GLOBAL,
+		.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
+		.hsw.has_vga = true,
 	},
 };