amd-xgbe: Add ethtool show/set channels support

Add ethtool support to show and set the device channel configuration.
Changing the channel configuration will result in a device restart.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/xgbe/xgbe-drv.c

@@ -1329,6 +1329,17 @@ static int xgbe_alloc_memory(struct xgbe_prv_data *pdata)
 	struct net_device *netdev = pdata->netdev;
 	int ret;
 
+	if (pdata->new_tx_ring_count) {
+		pdata->tx_ring_count = pdata->new_tx_ring_count;
+		pdata->tx_q_count = pdata->tx_ring_count;
+		pdata->new_tx_ring_count = 0;
+	}
+
+	if (pdata->new_rx_ring_count) {
+		pdata->rx_ring_count = pdata->new_rx_ring_count;
+		pdata->new_rx_ring_count = 0;
+	}
+
 	/* Calculate the Rx buffer size before allocating rings */
 	pdata->rx_buf_size = xgbe_calc_rx_buf_size(netdev, netdev->mtu);
 
@@ -1482,6 +1493,20 @@ static void xgbe_stopdev(struct work_struct *work)
 	netdev_alert(pdata->netdev, "device stopped\n");
 }
 
+void xgbe_full_restart_dev(struct xgbe_prv_data *pdata)
+{
+	/* If not running, "restart" will happen on open */
+	if (!netif_running(pdata->netdev))
+		return;
+
+	xgbe_stop(pdata);
+
+	xgbe_free_memory(pdata);
+	xgbe_alloc_memory(pdata);
+
+	xgbe_start(pdata);
+}
+
 void xgbe_restart_dev(struct xgbe_prv_data *pdata)
 {
 	/* If not running, "restart" will happen on open */

drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c

@@ -705,6 +705,138 @@ static int xgbe_set_ringparam(struct net_device *netdev,
 	return 0;
 }
 
+static void xgbe_get_channels(struct net_device *netdev,
+			      struct ethtool_channels *channels)
+{
+	struct xgbe_prv_data *pdata = netdev_priv(netdev);
+	unsigned int rx, tx, combined;
+
+	/* Calculate maximums allowed:
+	 *   - Take into account the number of available IRQs
+	 *   - Do not take into account the number of online CPUs so that
+	 *     the user can over-subscribe if desired
+	 *   - Tx is additionally limited by the number of hardware queues
+	 */
+	rx = min(pdata->hw_feat.rx_ch_cnt, pdata->rx_max_channel_count);
+	rx = min(rx, pdata->channel_irq_count);
+	tx = min(pdata->hw_feat.tx_ch_cnt, pdata->tx_max_channel_count);
+	tx = min(tx, pdata->channel_irq_count);
+	tx = min(tx, pdata->tx_max_q_count);
+
+	combined = min(rx, tx);
+
+	channels->max_combined = combined;
+	channels->max_rx = rx ? rx - 1 : 0;
+	channels->max_tx = tx ? tx - 1 : 0;
+
+	/* Get current settings based on device state */
+	rx = pdata->new_rx_ring_count ? : pdata->rx_ring_count;
+	tx = pdata->new_tx_ring_count ? : pdata->tx_ring_count;
+
+	combined = min(rx, tx);
+	rx -= combined;
+	tx -= combined;
+
+	channels->combined_count = combined;
+	channels->rx_count = rx;
+	channels->tx_count = tx;
+}
+
+static void xgbe_print_set_channels_input(struct net_device *netdev,
+					  struct ethtool_channels *channels)
+{
+	netdev_err(netdev, "channel inputs: combined=%u, rx-only=%u, tx-only=%u\n",
+		   channels->combined_count, channels->rx_count,
+		   channels->tx_count);
+}
+
+static int xgbe_set_channels(struct net_device *netdev,
+			     struct ethtool_channels *channels)
+{
+	struct xgbe_prv_data *pdata = netdev_priv(netdev);
+	unsigned int rx, rx_curr, tx, tx_curr, combined;
+
+	/* Calculate maximums allowed:
+	 *   - Take into account the number of available IRQs
+	 *   - Do not take into account the number of online CPUs so that
+	 *     the user can over-subscribe if desired
+	 *   - Tx is additionally limited by the number of hardware queues
+	 */
+	rx = min(pdata->hw_feat.rx_ch_cnt, pdata->rx_max_channel_count);
+	rx = min(rx, pdata->channel_irq_count);
+	tx = min(pdata->hw_feat.tx_ch_cnt, pdata->tx_max_channel_count);
+	tx = min(tx, pdata->tx_max_q_count);
+	tx = min(tx, pdata->channel_irq_count);
+
+	combined = min(rx, tx);
+
+	/* Should not be setting other count */
+	if (channels->other_count) {
+		netdev_err(netdev,
+			   "other channel count must be zero\n");
+		return -EINVAL;
+	}
+
+	/* Require at least one Combined (Rx and Tx) channel */
+	if (!channels->combined_count) {
+		netdev_err(netdev,
+			   "at least one combined Rx/Tx channel is required\n");
+		xgbe_print_set_channels_input(netdev, channels);
+		return -EINVAL;
+	}
+
+	/* Check combined channels */
+	if (channels->combined_count > combined) {
+		netdev_err(netdev,
+			   "combined channel count cannot exceed %u\n",
+			   combined);
+		xgbe_print_set_channels_input(netdev, channels);
+		return -EINVAL;
+	}
+
+	/* Can have some Rx-only or Tx-only channels, but not both */
+	if (channels->rx_count && channels->tx_count) {
+		netdev_err(netdev,
+			   "cannot specify both Rx-only and Tx-only channels\n");
+		xgbe_print_set_channels_input(netdev, channels);
+		return -EINVAL;
+	}
+
+	/* Check that we don't exceed the maximum number of channels */
+	if ((channels->combined_count + channels->rx_count) > rx) {
+		netdev_err(netdev,
+			   "total Rx channels (%u) requested exceeds maximum available (%u)\n",
+			   channels->combined_count + channels->rx_count, rx);
+		xgbe_print_set_channels_input(netdev, channels);
+		return -EINVAL;
+	}
+
+	if ((channels->combined_count + channels->tx_count) > tx) {
+		netdev_err(netdev,
+			   "total Tx channels (%u) requested exceeds maximum available (%u)\n",
+			   channels->combined_count + channels->tx_count, tx);
+		xgbe_print_set_channels_input(netdev, channels);
+		return -EINVAL;
+	}
+
+	rx = channels->combined_count + channels->rx_count;
+	tx = channels->combined_count + channels->tx_count;
+
+	rx_curr = pdata->new_rx_ring_count ? : pdata->rx_ring_count;
+	tx_curr = pdata->new_tx_ring_count ? : pdata->tx_ring_count;
+
+	if ((rx == rx_curr) && (tx == tx_curr))
+		goto out;
+
+	pdata->new_rx_ring_count = rx;
+	pdata->new_tx_ring_count = tx;
+
+	xgbe_full_restart_dev(pdata);
+
+out:
+	return 0;
+}
+
 static const struct ethtool_ops xgbe_ethtool_ops = {
 	.get_drvinfo = xgbe_get_drvinfo,
 	.get_msglevel = xgbe_get_msglevel,
@@ -729,6 +861,8 @@ static const struct ethtool_ops xgbe_ethtool_ops = {
 	.get_module_eeprom = xgbe_get_module_eeprom,
 	.get_ringparam = xgbe_get_ringparam,
 	.set_ringparam = xgbe_set_ringparam,
+	.get_channels = xgbe_get_channels,
+	.set_channels = xgbe_set_channels,
 };
 
 const struct ethtool_ops *xgbe_get_ethtool_ops(void)

drivers/net/ethernet/amd/xgbe/xgbe.h

@@ -1122,6 +1122,9 @@ struct xgbe_prv_data {
 	unsigned int rx_ring_count;
 	unsigned int rx_desc_count;
 
+	unsigned int new_tx_ring_count;
+	unsigned int new_rx_ring_count;
+
 	unsigned int tx_max_q_count;
 	unsigned int rx_max_q_count;
 	unsigned int tx_q_count;
@@ -1336,6 +1339,7 @@ int xgbe_powerdown(struct net_device *, unsigned int);
 void xgbe_init_rx_coalesce(struct xgbe_prv_data *);
 void xgbe_init_tx_coalesce(struct xgbe_prv_data *);
 void xgbe_restart_dev(struct xgbe_prv_data *pdata);
+void xgbe_full_restart_dev(struct xgbe_prv_data *pdata);
 
 #ifdef CONFIG_DEBUG_FS
 void xgbe_debugfs_init(struct xgbe_prv_data *);