Merge branch 'next' into for-linus

Documentation/input/ff.txt

@@ -49,7 +49,9 @@ This information is subject to change.
 #include <linux/input.h>
 #include <sys/ioctl.h>
 
-unsigned long features[1 + FF_MAX/sizeof(unsigned long)];
+#define BITS_TO_LONGS(x) \
+	(((x) + 8 * sizeof (unsigned long) - 1) / (8 * sizeof (unsigned long)))
+unsigned long features[BITS_TO_LONGS(FF_CNT)];
 int ioctl(int file_descriptor, int request, unsigned long *features);
 
 "request" must be EVIOCGBIT(EV_FF, size of features array in bytes )

Documentation/kernel-parameters.txt

@@ -884,6 +884,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
+	i8042.notimeout	[HW] Ignore timeout condition signalled by conroller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 

drivers/input/joystick/Kconfig

@@ -255,6 +255,16 @@ config JOYSTICK_AMIGA
 	  To compile this driver as a module, choose M here: the
 	  module will be called amijoy.
 
+config JOYSTICK_AS5011
+	tristate "Austria Microsystem AS5011 joystick"
+	depends on I2C
+	help
+	  Say Y here if you have an AS5011 digital joystick connected to your
+	  system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called as5011.
+
 config JOYSTICK_JOYDUMP
 	tristate "Gameport data dumper"
 	select GAMEPORT

drivers/input/joystick/Makefile

@@ -7,6 +7,7 @@
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
 obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
 obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
+obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
 obj-$(CONFIG_JOYSTICK_ANALOG)		+= analog.o
 obj-$(CONFIG_JOYSTICK_COBRA)		+= cobra.o
 obj-$(CONFIG_JOYSTICK_DB9)		+= db9.o

drivers/input/joystick/as5011.c

+/*
+ * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
+ * Sponsored by ARMadeus Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Driver for Austria Microsystems joysticks AS5011
+ *
+ * TODO:
+ *	- Power on the chip when open() and power down when close()
+ *	- Manage power mode
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/input/as5011.h>
+#include <linux/slab.h>
+
+#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
+#define MODULE_DEVICE_ALIAS "as5011"
+
+MODULE_AUTHOR("Fabien Marteau <fabien.marteau@armadeus.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* registers */
+#define AS5011_CTRL1		0x76
+#define AS5011_CTRL2		0x75
+#define AS5011_XP		0x43
+#define AS5011_XN		0x44
+#define AS5011_YP		0x53
+#define AS5011_YN		0x54
+#define AS5011_X_REG		0x41
+#define AS5011_Y_REG		0x42
+#define AS5011_X_RES_INT	0x51
+#define AS5011_Y_RES_INT	0x52
+
+/* CTRL1 bits */
+#define AS5011_CTRL1_LP_PULSED		0x80
+#define AS5011_CTRL1_LP_ACTIVE		0x40
+#define AS5011_CTRL1_LP_CONTINUE	0x20
+#define AS5011_CTRL1_INT_WUP_EN		0x10
+#define AS5011_CTRL1_INT_ACT_EN		0x08
+#define AS5011_CTRL1_EXT_CLK_EN		0x04
+#define AS5011_CTRL1_SOFT_RST		0x02
+#define AS5011_CTRL1_DATA_VALID		0x01
+
+/* CTRL2 bits */
+#define AS5011_CTRL2_EXT_SAMPLE_EN	0x08
+#define AS5011_CTRL2_RC_BIAS_ON		0x04
+#define AS5011_CTRL2_INV_SPINNING	0x02
+
+#define AS5011_MAX_AXIS	80
+#define AS5011_MIN_AXIS	(-80)
+#define AS5011_FUZZ	8
+#define AS5011_FLAT	40
+
+struct as5011_device {
+	struct input_dev *input_dev;
+	struct i2c_client *i2c_client;
+	unsigned int button_gpio;
+	unsigned int button_irq;
+	unsigned int axis_irq;
+};
+
+static int as5011_i2c_write(struct i2c_client *client,
+			    uint8_t aregaddr,
+			    uint8_t avalue)
+{
+	uint8_t data[2] = { aregaddr, avalue };
+	struct i2c_msg msg = {
+		client->addr, I2C_M_IGNORE_NAK, 2, (uint8_t *)data
+	};
+	int error;
+
+	error = i2c_transfer(client->adapter, &msg, 1);
+	return error < 0 ? error : 0;
+}
+
+static int as5011_i2c_read(struct i2c_client *client,
+			   uint8_t aregaddr, signed char *value)
+{
+	uint8_t data[2] = { aregaddr };
+	struct i2c_msg msg_set[2] = {
+		{ client->addr, I2C_M_REV_DIR_ADDR, 1, (uint8_t *)data },
+		{ client->addr, I2C_M_RD | I2C_M_NOSTART, 1, (uint8_t *)data }
+	};
+	int error;
+
+	error = i2c_transfer(client->adapter, msg_set, 2);
+	if (error < 0)
+		return error;
+
+	*value = data[0] & 0x80 ? -1 * (1 + ~data[0]) : data[0];
+	return 0;
+}
+
+static irqreturn_t as5011_button_interrupt(int irq, void *dev_id)
+{
+	struct as5011_device *as5011 = dev_id;
+	int val = gpio_get_value_cansleep(as5011->button_gpio);
+
+	input_report_key(as5011->input_dev, BTN_JOYSTICK, !val);
+	input_sync(as5011->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t as5011_axis_interrupt(int irq, void *dev_id)
+{
+	struct as5011_device *as5011 = dev_id;
+	int error;
+	signed char x, y;
+
+	error = as5011_i2c_read(as5011->i2c_client, AS5011_X_RES_INT, &x);
+	if (error < 0)
+		goto out;
+
+	error = as5011_i2c_read(as5011->i2c_client, AS5011_Y_RES_INT, &y);
+	if (error < 0)
+		goto out;
+
+	input_report_abs(as5011->input_dev, ABS_X, x);
+	input_report_abs(as5011->input_dev, ABS_Y, y);
+	input_sync(as5011->input_dev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit as5011_configure_chip(struct as5011_device *as5011,
+				const struct as5011_platform_data *plat_dat)
+{
+	struct i2c_client *client = as5011->i2c_client;
+	int error;
+	signed char value;
+
+	/* chip soft reset */
+	error = as5011_i2c_write(client, AS5011_CTRL1,
+				 AS5011_CTRL1_SOFT_RST);
+	if (error < 0) {
+		dev_err(&client->dev, "Soft reset failed\n");
+		return error;
+	}
+
+	mdelay(10);
+
+	error = as5011_i2c_write(client, AS5011_CTRL1,
+				 AS5011_CTRL1_LP_PULSED |
+				 AS5011_CTRL1_LP_ACTIVE |
+				 AS5011_CTRL1_INT_ACT_EN);
+	if (error < 0) {
+		dev_err(&client->dev, "Power config failed\n");
+		return error;
+	}
+
+	error = as5011_i2c_write(client, AS5011_CTRL2,
+				 AS5011_CTRL2_INV_SPINNING);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't invert spinning\n");
+		return error;
+	}
+
+	/* write threshold */
+	error = as5011_i2c_write(client, AS5011_XP, plat_dat->xp);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't write threshold\n");
+		return error;
+	}
+
+	error = as5011_i2c_write(client, AS5011_XN, plat_dat->xn);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't write threshold\n");
+		return error;
+	}
+
+	error = as5011_i2c_write(client, AS5011_YP, plat_dat->yp);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't write threshold\n");
+		return error;
+	}
+
+	error = as5011_i2c_write(client, AS5011_YN, plat_dat->yn);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't write threshold\n");
+		return error;
+	}
+
+	/* to free irq gpio in chip */
+	error = as5011_i2c_read(client, AS5011_X_RES_INT, &value);
+	if (error < 0) {
+		dev_err(&client->dev, "Can't read i2c X resolution value\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static int __devinit as5011_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	const struct as5011_platform_data *plat_data;
+	struct as5011_device *as5011;
+	struct input_dev *input_dev;
+	int irq;
+	int error;
+
+	plat_data = client->dev.platform_data;
+	if (!plat_data)
+		return -EINVAL;
+
+	if (!plat_data->axis_irq) {
+		dev_err(&client->dev, "No axis IRQ?\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_PROTOCOL_MANGLING)) {
+		dev_err(&client->dev,
+			"need i2c bus that supports protocol mangling\n");
+		return -ENODEV;
+	}
+
+	as5011 = kmalloc(sizeof(struct as5011_device), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!as5011 || !input_dev) {
+		dev_err(&client->dev,
+			"Can't allocate memory for device structure\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	as5011->i2c_client = client;
+	as5011->input_dev = input_dev;
+	as5011->button_gpio = plat_data->button_gpio;
+	as5011->axis_irq = plat_data->axis_irq;
+
+	input_dev->name = "Austria Microsystem as5011 joystick";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(BTN_JOYSTICK, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X,
+		AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
+	input_set_abs_params(as5011->input_dev, ABS_Y,
+		AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
+
+	error = gpio_request(as5011->button_gpio, "AS5011 button");
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to request button gpio\n");
+		goto err_free_mem;
+	}
+
+	irq = gpio_to_irq(as5011->button_gpio);
+	if (irq < 0) {
+		dev_err(&client->dev,
+			"Failed to get irq number for button gpio\n");
+		goto err_free_button_gpio;
+	}
+
+	as5011->button_irq = irq;
+
+	error = request_threaded_irq(as5011->button_irq,
+				     NULL, as5011_button_interrupt,
+				     IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				     "as5011_button", as5011);
+	if (error < 0) {
+		dev_err(&client->dev,
+			"Can't allocate button irq %d\n", as5011->button_irq);
+		goto err_free_button_gpio;
+	}
+
+	error = as5011_configure_chip(as5011, plat_data);
+	if (error)
+		goto err_free_button_irq;
+
+	error = request_threaded_irq(as5011->axis_irq, NULL,
+				     as5011_axis_interrupt,
+				     plat_data->axis_irqflags,
+				     "as5011_joystick", as5011);
+	if (error) {
+		dev_err(&client->dev,
+			"Can't allocate axis irq %d\n", plat_data->axis_irq);
+		goto err_free_button_irq;
+	}
+
+	error = input_register_device(as5011->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		goto err_free_axis_irq;
+	}
+
+	i2c_set_clientdata(client, as5011);
+
+	return 0;
+
+err_free_axis_irq:
+	free_irq(as5011->axis_irq, as5011);
+err_free_button_irq:
+	free_irq(as5011->button_irq, as5011);
+err_free_button_gpio:
+	gpio_free(as5011->button_gpio);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(as5011);
+
+	return error;
+}
+
+static int __devexit as5011_remove(struct i2c_client *client)
+{
+	struct as5011_device *as5011 = i2c_get_clientdata(client);
+
+	free_irq(as5011->axis_irq, as5011);
+	free_irq(as5011->button_irq, as5011);
+	gpio_free(as5011->button_gpio);
+
+	input_unregister_device(as5011->input_dev);
+	kfree(as5011);
+
+	return 0;
+}
+
+static const struct i2c_device_id as5011_id[] = {
+	{ MODULE_DEVICE_ALIAS, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, as5011_id);
+
+static struct i2c_driver as5011_driver = {
+	.driver = {
+		.name = "as5011",
+	},
+	.probe		= as5011_probe,
+	.remove		= __devexit_p(as5011_remove),
+	.id_table	= as5011_id,
+};
+
+static int __init as5011_init(void)
+{
+	return i2c_add_driver(&as5011_driver);
+}
+module_init(as5011_init);
+
+static void __exit as5011_exit(void)
+{
+	i2c_del_driver(&as5011_driver);
+}
+module_exit(as5011_exit);

drivers/input/keyboard/Kconfig

@@ -12,18 +12,6 @@ menuconfig INPUT_KEYBOARD
 
 if INPUT_KEYBOARD
 
-config KEYBOARD_AAED2000
-	tristate "AAED-2000 keyboard"
-	depends on MACH_AAED2000
-	select INPUT_POLLDEV
-	default y
-	help
-	  Say Y here to enable the keyboard on the Agilent AAED-2000
-	  development board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aaed2000_kbd.
-
 config KEYBOARD_ADP5520
 	tristate "Keypad Support for ADP5520 PMIC"
 	depends on PMIC_ADP5520

drivers/input/keyboard/Makefile

@@ -4,7 +4,6 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
 obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o

drivers/input/keyboard/aaed2000_kbd.c

-/*
- *  Keyboard driver for the AAED-2000 dev board
- *
- *  Copyright (c) 2006 Nicolas Bellido Y Ortega
- *
- *  Based on corgikbd.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/input-polldev.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <mach/aaed2000.h>
-
-#define KB_ROWS			12
-#define KB_COLS			8
-#define KB_ROWMASK(r)		(1 << (r))
-#define SCANCODE(r,c)		(((c) * KB_ROWS) + (r))
-#define NR_SCANCODES		(KB_COLS * KB_ROWS)
-
-#define SCAN_INTERVAL		(50) /* ms */
-#define KB_ACTIVATE_DELAY	(20) /* us */
-
-static unsigned char aaedkbd_keycode[NR_SCANCODES] = {
-	KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, 0, KEY_SPACE, KEY_KP6, 0, KEY_KPDOT, 0, 0,
-	KEY_K, KEY_M, KEY_O, KEY_DOT, KEY_SLASH, 0, KEY_F, 0, 0, 0, KEY_LEFTSHIFT, 0,
-	KEY_I, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, 0, 0, 0, 0, KEY_RIGHTSHIFT, 0,
-	KEY_8, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_ENTER, 0, 0, 0, 0, 0, 0, 0,
-	KEY_J, KEY_H, KEY_B, KEY_KP8, KEY_KP4, 0, KEY_C, KEY_D, KEY_S, KEY_A, 0, KEY_CAPSLOCK,
-	KEY_Y, KEY_U, KEY_N, KEY_T, 0, 0, KEY_R, KEY_E, KEY_W, KEY_Q, 0, KEY_TAB,
-	KEY_7, KEY_6, KEY_G, 0, KEY_5, 0, KEY_4, KEY_3, KEY_2, KEY_1, 0, KEY_GRAVE,
-	0, 0, KEY_COMMA, 0, KEY_KP2, 0, KEY_V, KEY_LEFTALT, KEY_X, KEY_Z, 0, KEY_LEFTCTRL
-};
-
-struct aaedkbd {
-	unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)];
-	struct input_polled_dev *poll_dev;
-	int kbdscan_state[KB_COLS];
-	int kbdscan_count[KB_COLS];
-};
-
-#define KBDSCAN_STABLE_COUNT 2
-
-static void aaedkbd_report_col(struct aaedkbd *aaedkbd,
-				unsigned int col, unsigned int rowd)
-{
-	unsigned int scancode, pressed;
-	unsigned int row;
-
-	for (row = 0; row < KB_ROWS; row++) {
-		scancode = SCANCODE(row, col);
-		pressed = rowd & KB_ROWMASK(row);
-
-		input_report_key(aaedkbd->poll_dev->input,
-				 aaedkbd->keycode[scancode], pressed);
-	}
-}
-
-/* Scan the hardware keyboard and push any changes up through the input layer */
-static void aaedkbd_poll(struct input_polled_dev *dev)
-{
-	struct aaedkbd *aaedkbd = dev->private;
-	unsigned int col, rowd;
-
-	col = 0;
-	do {
-		AAEC_GPIO_KSCAN = col + 8;
-		udelay(KB_ACTIVATE_DELAY);
-		rowd = AAED_EXT_GPIO & AAED_EGPIO_KBD_SCAN;
-
-		if (rowd != aaedkbd->kbdscan_state[col]) {
-			aaedkbd->kbdscan_count[col] = 0;
-			aaedkbd->kbdscan_state[col] = rowd;
-		} else if (++aaedkbd->kbdscan_count[col] >= KBDSCAN_STABLE_COUNT) {
-			aaedkbd_report_col(aaedkbd, col, rowd);
-			col++;
-		}
-	} while (col < KB_COLS);
-
-	AAEC_GPIO_KSCAN = 0x07;
-	input_sync(dev->input);
-}
-
-static int __devinit aaedkbd_probe(struct platform_device *pdev)
-{
-	struct aaedkbd *aaedkbd;
-	struct input_polled_dev *poll_dev;
-	struct input_dev *input_dev;
-	int i;
-	int error;
-
-	aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL);
-	poll_dev = input_allocate_polled_device();
-	if (!aaedkbd || !poll_dev) {
-		error = -ENOMEM;
-		goto fail;
-	}
-
-	platform_set_drvdata(pdev, aaedkbd);
-
-	aaedkbd->poll_dev = poll_dev;
-	memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode));
-
-	poll_dev->private = aaedkbd;
-	poll_dev->poll = aaedkbd_poll;
-	poll_dev->poll_interval = SCAN_INTERVAL;
-
-	input_dev = poll_dev->input;
-	input_dev->name = "AAED-2000 Keyboard";
-	input_dev->phys = "aaedkbd/input0";
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0x0001;
-	input_dev->id.product = 0x0001;
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_dev->keycode = aaedkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
-	input_dev->keycodemax = ARRAY_SIZE(aaedkbd_keycode);
-
-	for (i = 0; i < ARRAY_SIZE(aaedkbd_keycode); i++)
-		set_bit(aaedkbd->keycode[i], input_dev->keybit);
-	clear_bit(0, input_dev->keybit);
-
-	error = input_register_polled_device(aaedkbd->poll_dev);
-	if (error)
-		goto fail;
-
-	return 0;
-
- fail:	kfree(aaedkbd);
-	input_free_polled_device(poll_dev);
-	return error;
-}
-
-static int __devexit aaedkbd_remove(struct platform_device *pdev)
-{
-	struct aaedkbd *aaedkbd = platform_get_drvdata(pdev);
-
-	input_unregister_polled_device(aaedkbd->poll_dev);
-	input_free_polled_device(aaedkbd->poll_dev);
-	kfree(aaedkbd);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:aaed2000-keyboard");
-
-static struct platform_driver aaedkbd_driver = {
-	.probe		= aaedkbd_probe,
-	.remove		= __devexit_p(aaedkbd_remove),
-	.driver		= {
-		.name	= "aaed2000-keyboard",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init aaedkbd_init(void)
-{
-	return platform_driver_register(&aaedkbd_driver);
-}
-
-static void __exit aaedkbd_exit(void)
-{
-	platform_driver_unregister(&aaedkbd_driver);
-}
-
-module_init(aaedkbd_init);
-module_exit(aaedkbd_exit);
-
-MODULE_AUTHOR("Nicolas Bellido Y Ortega");
-MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
-MODULE_LICENSE("GPL v2");

drivers/input/serio/i8042-x86ia64io.h

@@ -424,6 +424,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 		},
 	},
+	{
+		/* Dell Vostro V13 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+		},
+	},
 	{ }
 };
 
@@ -545,6 +552,17 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
 };
 #endif
 
+static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
+	{
+		/* Dell Vostro V13 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+		},
+	},
+	{ }
+};
+
 /*
  * Some Wistron based laptops need us to explicitly enable the 'Dritek
  * keyboard extension' to make their extra keys start generating scancodes.
@@ -896,6 +914,9 @@ static int __init i8042_platform_init(void)
 	if (dmi_check_system(i8042_dmi_nomux_table))
 		i8042_nomux = true;
 
+	if (dmi_check_system(i8042_dmi_notimeout_table))
+		i8042_notimeout = true;
+
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = true;
 #endif /* CONFIG_X86 */

drivers/input/serio/i8042.c

@@ -63,6 +63,10 @@ static bool i8042_noloop;
 module_param_named(noloop, i8042_noloop, bool, 0);
 MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
 
+static bool i8042_notimeout;
+module_param_named(notimeout, i8042_notimeout, bool, 0);
+MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
+
 #ifdef CONFIG_X86
 static bool i8042_dritek;
 module_param_named(dritek, i8042_dritek, bool, 0);
@@ -504,7 +508,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	} else {
 
 		dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
-		      ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
+		      ((str & I8042_STR_TIMEOUT && !i8042_notimeout) ? SERIO_TIMEOUT : 0);
 
 		port_no = (str & I8042_STR_AUXDATA) ?
 				I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;

drivers/input/touchscreen/ad7879-i2c.c

@@ -10,14 +10,16 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/pm.h>
 
 #include "ad7879.h"
 
 #define AD7879_DEVID		0x79	/* AD7879-1/AD7889-1 */
 
 #ifdef CONFIG_PM
-static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message)
+static int ad7879_i2c_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct ad7879 *ts = i2c_get_clientdata(client);
 
 	ad7879_suspend(ts);
@@ -25,17 +27,17 @@ static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message)
 	return 0;
 }
 
-static int ad7879_i2c_resume(struct i2c_client *client)
+static int ad7879_i2c_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct ad7879 *ts = i2c_get_clientdata(client);
 
 	ad7879_resume(ts);
 
 	return 0;
 }
-#else
-# define ad7879_i2c_suspend NULL
-# define ad7879_i2c_resume  NULL
+
+static SIMPLE_DEV_PM_OPS(ad7879_i2c_pm, ad7879_i2c_suspend, ad7879_i2c_resume);
 #endif
 
 /* All registers are word-sized.
@@ -117,11 +119,12 @@ static struct i2c_driver ad7879_i2c_driver = {
 	.driver = {
 		.name	= "ad7879",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &ad7879_i2c_pm,
+#endif
 	},
 	.probe		= ad7879_i2c_probe,
 	.remove		= __devexit_p(ad7879_i2c_remove),
-	.suspend	= ad7879_i2c_suspend,
-	.resume		= ad7879_i2c_resume,
 	.id_table	= ad7879_id,
 };
 

drivers/input/touchscreen/cy8ctmg110_ts.c

@@ -280,8 +280,9 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client,
 }
 
 #ifdef CONFIG_PM
-static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
+static int cy8ctmg110_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(&client->dev))
@@ -293,8 +294,9 @@ static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int cy8ctmg110_resume(struct i2c_client *client)
+static int cy8ctmg110_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(&client->dev))
@@ -305,6 +307,8 @@ static int cy8ctmg110_resume(struct i2c_client *client)
 	}
 	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);
 #endif
 
 static int __devexit cy8ctmg110_remove(struct i2c_client *client)
@@ -335,14 +339,13 @@ static struct i2c_driver cy8ctmg110_driver = {
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= CY8CTMG110_DRIVER_NAME,
+#ifdef CONFIG_PM
+		.pm	= &cy8ctmg110_pm,
+#endif
 	},
 	.id_table	= cy8ctmg110_idtable,
 	.probe		= cy8ctmg110_probe,
 	.remove		= __devexit_p(cy8ctmg110_remove),
-#ifdef CONFIG_PM
-	.suspend	= cy8ctmg110_suspend,
-	.resume		= cy8ctmg110_resume,
-#endif
 };
 
 static int __init cy8ctmg110_init(void)

drivers/input/touchscreen/eeti_ts.c

@@ -261,8 +261,9 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+static int eeti_ts_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
 	struct input_dev *input_dev = priv->input;
 
@@ -279,8 +280,9 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int eeti_ts_resume(struct i2c_client *client)
+static int eeti_ts_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
 	struct input_dev *input_dev = priv->input;
 
@@ -296,9 +298,8 @@ static int eeti_ts_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define eeti_ts_suspend NULL
-#define eeti_ts_resume NULL
+
+static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);
 #endif
 
 static const struct i2c_device_id eeti_ts_id[] = {
@@ -310,11 +311,12 @@ MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
 static struct i2c_driver eeti_ts_driver = {
 	.driver = {
 		.name = "eeti_ts",
+#ifdef CONFIG_PM
+		.pm = &eeti_ts_pm,
+#endif
 	},
 	.probe = eeti_ts_probe,
 	.remove = __devexit_p(eeti_ts_remove),
-	.suspend = eeti_ts_suspend,
-	.resume = eeti_ts_resume,
 	.id_table = eeti_ts_id,
 };
 

drivers/input/touchscreen/mcs5000_ts.c

@@ -261,25 +261,27 @@ static int __devexit mcs5000_ts_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+static int mcs5000_ts_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	/* Touch sleep mode */
 	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
 
 	return 0;
 }
 
-static int mcs5000_ts_resume(struct i2c_client *client)
+static int mcs5000_ts_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
 
 	mcs5000_ts_phys_init(data);
 
 	return 0;
 }
-#else
-#define mcs5000_ts_suspend	NULL
-#define mcs5000_ts_resume	NULL
+
+static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume);
 #endif
 
 static const struct i2c_device_id mcs5000_ts_id[] = {
@@ -291,10 +293,11 @@ MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
 static struct i2c_driver mcs5000_ts_driver = {
 	.probe		= mcs5000_ts_probe,
 	.remove		= __devexit_p(mcs5000_ts_remove),
-	.suspend	= mcs5000_ts_suspend,
-	.resume		= mcs5000_ts_resume,
 	.driver = {
 		.name = "mcs5000_ts",
+#ifdef CONFIG_PM
+		.pm   = &mcs5000_ts_pm,
+#endif
 	},
 	.id_table	= mcs5000_ts_id,
 };

drivers/input/touchscreen/migor_ts.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <asm/io.h>
 #include <linux/i2c.h>
@@ -226,8 +227,9 @@ static int migor_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
-static int migor_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+static int migor_ts_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
 
 	if (device_may_wakeup(&client->dev))
@@ -236,8 +238,9 @@ static int migor_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int migor_ts_resume(struct i2c_client *client)
+static int migor_ts_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
 
 	if (device_may_wakeup(&client->dev))
@@ -246,6 +249,8 @@ static int migor_ts_resume(struct i2c_client *client)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume);
+
 static const struct i2c_device_id migor_ts_id[] = {
 	{ "migor_ts", 0 },
 	{ }
@@ -255,11 +260,10 @@ MODULE_DEVICE_TABLE(i2c, migor_ts);
 static struct i2c_driver migor_ts_driver = {
 	.driver = {
 		.name = "migor_ts",
+		.pm = &migor_ts_pm,
 	},
 	.probe = migor_ts_probe,
 	.remove = migor_ts_remove,
-	.suspend = migor_ts_suspend,
-	.resume = migor_ts_resume,
 	.id_table = migor_ts_id,
 };
 

drivers/input/touchscreen/wacom_w8001.c

@@ -3,6 +3,7 @@
  *
  * Copyright (c) 2008 Jaya Kumar
  * Copyright (c) 2010 Red Hat, Inc.
+ * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
@@ -64,11 +65,11 @@ struct w8001_coord {
 
 /* touch query reply packet */
 struct w8001_touch_query {
+	u16 x;
+	u16 y;
 	u8 panel_res;
 	u8 capacity_res;
 	u8 sensor_id;
-	u16 x;
-	u16 y;
 };
 
 /*
@@ -87,9 +88,14 @@ struct w8001 {
 	char phys[32];
 	int type;
 	unsigned int pktlen;
+	u16 max_touch_x;
+	u16 max_touch_y;
+	u16 max_pen_x;
+	u16 max_pen_y;
+	char name[64];
 };
 
-static void parse_data(u8 *data, struct w8001_coord *coord)
+static void parse_pen_data(u8 *data, struct w8001_coord *coord)
 {
 	memset(coord, 0, sizeof(*coord));
 
@@ -113,11 +119,30 @@ static void parse_data(u8 *data, struct w8001_coord *coord)
 	coord->tilt_y = data[8] & 0x7F;
 }
 
-static void parse_touch(struct w8001 *w8001)
+static void parse_single_touch(u8 *data, struct w8001_coord *coord)
+{
+	coord->x = (data[1] << 7) | data[2];
+	coord->y = (data[3] << 7) | data[4];
+	coord->tsw = data[0] & 0x01;
+}
+
+static void scale_touch_coordinates(struct w8001 *w8001,
+				    unsigned int *x, unsigned int *y)
+{
+	if (w8001->max_pen_x && w8001->max_touch_x)
+		*x = *x * w8001->max_pen_x / w8001->max_touch_x;
+
+	if (w8001->max_pen_y && w8001->max_touch_y)
+		*y = *y * w8001->max_pen_y / w8001->max_touch_y;
+}
+
+static void parse_multi_touch(struct w8001 *w8001)
 {
 	struct input_dev *dev = w8001->dev;
 	unsigned char *data = w8001->data;
+	unsigned int x, y;
 	int i;
+	int count = 0;
 
 	for (i = 0; i < 2; i++) {
 		bool touch = data[0] & (1 << i);
@@ -125,15 +150,29 @@ static void parse_touch(struct w8001 *w8001)
 		input_mt_slot(dev, i);
 		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
 		if (touch) {
-			int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
-			int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
+			x = (data[6 * i + 1] << 7) | data[6 * i + 2];
+			y = (data[6 * i + 3] << 7) | data[6 * i + 4];
 			/* data[5,6] and [11,12] is finger capacity */
 
+			/* scale to pen maximum */
+			scale_touch_coordinates(w8001, &x, &y);
+
 			input_report_abs(dev, ABS_MT_POSITION_X, x);
 			input_report_abs(dev, ABS_MT_POSITION_Y, y);
+			count++;
 		}
 	}
 
+	/* emulate single touch events when stylus is out of proximity.
+	 * This is to make single touch backward support consistent
+	 * across all Wacom single touch devices.
+	 */
+	if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+		w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
+		input_mt_report_pointer_emulation(dev, true);
+	}
+
 	input_sync(dev);
 }
 
@@ -152,6 +191,15 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
 	query->y = data[5] << 9;
 	query->y |= data[6] << 2;
 	query->y |= (data[2] >> 3) & 0x3;
+
+	/* Early days' single-finger touch models need the following defaults */
+	if (!query->x && !query->y) {
+		query->x = 1024;
+		query->y = 1024;
+		if (query->panel_res)
+			query->x = query->y = (1 << query->panel_res);
+		query->panel_res = 10;
+	}
 }
 
 static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
@@ -161,16 +209,15 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
 	/*
 	 * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
 	 * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
-	 * or eraser. assume
+	 * or eraser. Assume:
 	 * - if dev is already in proximity and f2 is toggled → pen + side2
 	 * - if dev comes into proximity with f2 set → eraser
 	 * If f2 disappears after assuming eraser, fake proximity out for
 	 * eraser and in for pen.
 	 */
 
-	if (!w8001->type) {
-		w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-	} else if (w8001->type == BTN_TOOL_RUBBER) {
+	switch (w8001->type) {
+	case BTN_TOOL_RUBBER:
 		if (!coord->f2) {
 			input_report_abs(dev, ABS_PRESSURE, 0);
 			input_report_key(dev, BTN_TOUCH, 0);
@@ -180,8 +227,21 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
 			input_sync(dev);
 			w8001->type = BTN_TOOL_PEN;
 		}
-	} else {
+		break;
+
+	case BTN_TOOL_FINGER:
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_report_key(dev, BTN_TOOL_FINGER, 0);
+		input_sync(dev);
+		/* fall through */
+
+	case KEY_RESERVED:
+		w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		break;
+
+	default:
 		input_report_key(dev, BTN_STYLUS2, coord->f2);
+		break;
 	}
 
 	input_report_abs(dev, ABS_X, coord->x);
@@ -193,7 +253,26 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
 	input_sync(dev);
 
 	if (!coord->rdy)
-		w8001->type = 0;
+		w8001->type = KEY_RESERVED;
+}
+
+static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+	unsigned int x = coord->x;
+	unsigned int y = coord->y;
+
+	/* scale to pen maximum */
+	scale_touch_coordinates(w8001, &x, &y);
+
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
+
+	input_sync(dev);
+
+	w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
 }
 
 static irqreturn_t w8001_interrupt(struct serio *serio,
@@ -214,9 +293,18 @@ static irqreturn_t w8001_interrupt(struct serio *serio,
 
 	case W8001_PKTLEN_TOUCH93 - 1:
 	case W8001_PKTLEN_TOUCH9A - 1:
-		/* ignore one-finger touch packet. */
-		if (w8001->pktlen == w8001->idx)
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+		if (tmp != W8001_TOUCH_BYTE)
+			break;
+
+		if (w8001->pktlen == w8001->idx) {
 			w8001->idx = 0;
+			if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+				parse_single_touch(w8001->data, &coord);
+				report_single_touch(w8001, &coord);
+			}
+		}
 		break;
 
 	/* Pen coordinates packet */
@@ -225,18 +313,18 @@ static irqreturn_t w8001_interrupt(struct serio *serio,
 		if (unlikely(tmp == W8001_TAB_BYTE))
 			break;
 
-		tmp = (w8001->data[0] & W8001_TOUCH_BYTE);
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
 		if (tmp == W8001_TOUCH_BYTE)
 			break;
 
 		w8001->idx = 0;
-		parse_data(w8001->data, &coord);
+		parse_pen_data(w8001->data, &coord);
 		report_pen_events(w8001, &coord);
 		break;
 
 	/* control packet */
 	case W8001_PKTLEN_TPCCTL - 1:
-		tmp = (w8001->data[0] & W8001_TOUCH_MASK);
+		tmp = w8001->data[0] & W8001_TOUCH_MASK;
 		if (tmp == W8001_TOUCH_BYTE)
 			break;
 
@@ -249,7 +337,7 @@ static irqreturn_t w8001_interrupt(struct serio *serio,
 	/* 2 finger touch packet */
 	case W8001_PKTLEN_TOUCH2FG - 1:
 		w8001->idx = 0;
-		parse_touch(w8001);
+		parse_multi_touch(w8001);
 		break;
 	}
 
@@ -279,6 +367,7 @@ static int w8001_setup(struct w8001 *w8001)
 {
 	struct input_dev *dev = w8001->dev;
 	struct w8001_coord coord;
+	struct w8001_touch_query touch;
 	int error;
 
 	error = w8001_command(w8001, W8001_CMD_STOP, false);
@@ -287,14 +376,21 @@ static int w8001_setup(struct w8001 *w8001)
 
 	msleep(250);	/* wait 250ms before querying the device */
 
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+
 	/* penabled? */
 	error = w8001_command(w8001, W8001_CMD_QUERY, true);
 	if (!error) {
+		__set_bit(BTN_TOUCH, dev->keybit);
 		__set_bit(BTN_TOOL_PEN, dev->keybit);
 		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
 		__set_bit(BTN_STYLUS, dev->keybit);
 		__set_bit(BTN_STYLUS2, dev->keybit);
-		parse_data(w8001->response, &coord);
+
+		parse_pen_data(w8001->response, &coord);
+		w8001->max_pen_x = coord.x;
+		w8001->max_pen_y = coord.y;
 
 		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
 		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
@@ -303,6 +399,8 @@ static int w8001_setup(struct w8001 *w8001)
 			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
 			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
 		}
+		w8001->id = 0x90;
+		strlcat(w8001->name, " Penabled", sizeof(w8001->name));
 	}
 
 	/* Touch enabled? */
@@ -313,24 +411,38 @@ static int w8001_setup(struct w8001 *w8001)
 	 * second byte is empty, which indicates touch is not supported.
 	 */
 	if (!error && w8001->response[1]) {
-		struct w8001_touch_query touch;
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
 
 		parse_touchquery(w8001->response, &touch);
+		w8001->max_touch_x = touch.x;
+		w8001->max_touch_y = touch.y;
+
+		/* scale to pen maximum */
+		if (w8001->max_pen_x && w8001->max_pen_y) {
+			touch.x = w8001->max_pen_x;
+			touch.y = w8001->max_pen_y;
+		}
 
 		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
 		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
-		__set_bit(BTN_TOOL_FINGER, dev->keybit);
 
 		switch (touch.sensor_id) {
 		case 0:
 		case 2:
 			w8001->pktlen = W8001_PKTLEN_TOUCH93;
+			w8001->id = 0x93;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
 			break;
+
 		case 1:
 		case 3:
 		case 4:
 			w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+			w8001->id = 0x9a;
 			break;
+
 		case 5:
 			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
 
@@ -341,10 +453,18 @@ static int w8001_setup(struct w8001 *w8001)
 						0, touch.y, 0, 0);
 			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
 						0, MT_TOOL_MAX, 0, 0);
+
+			strlcat(w8001->name, " 2FG", sizeof(w8001->name));
+			if (w8001->max_pen_x && w8001->max_pen_y)
+				w8001->id = 0xE3;
+			else
+				w8001->id = 0xE2;
 			break;
 		}
 	}
 
+	strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
+
 	return w8001_command(w8001, W8001_CMD_START, false);
 }
 
@@ -384,22 +504,10 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	}
 
 	w8001->serio = serio;
-	w8001->id = serio->id.id;
 	w8001->dev = input_dev;
 	init_completion(&w8001->cmd_done);
 	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 
-	input_dev->name = "Wacom W8001 Penabled Serial TouchScreen";
-	input_dev->phys = w8001->phys;
-	input_dev->id.bustype = BUS_RS232;
-	input_dev->id.vendor = SERIO_W8001;
-	input_dev->id.product = w8001->id;
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &serio->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	__set_bit(BTN_TOUCH, input_dev->keybit);
-
 	serio_set_drvdata(serio, w8001);
 	err = serio_open(serio, drv);
 	if (err)
@@ -409,6 +517,14 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	if (err)
 		goto fail3;
 
+	input_dev->name = w8001->name;
+	input_dev->phys = w8001->phys;
+	input_dev->id.product = w8001->id;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = 0x056a;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
 	err = input_register_device(w8001->dev);
 	if (err)
 		goto fail3;

include/linux/input.h

@@ -800,6 +800,7 @@ struct input_keymap_entry {
 #define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
 #define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
 #define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 

include/linux/input/as5011.h

+#ifndef _AS5011_H
+#define _AS5011_H
+
+/*
+ * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+struct as5011_platform_data {
+	unsigned int button_gpio;
+	unsigned int axis_irq; /* irq number */
+	unsigned long axis_irqflags;
+	char xp, xn; /* threshold for x axis */
+	char yp, yn; /* threshold for y axis */
+};
+
+#endif /* _AS5011_H */