Commit 040bf7d6 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'iio-for-3.17d' of...

Merge tag 'iio-for-3.17d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle

New functionality
* A new modifier to indicate that a rotation is relative to either
  true or magnetic north.  This is to be used by some magnetometers
  that provide data in this way.
* hid magnetometer now supports output rotations from various variants on
  North
* HMC5843 driver converted to regmap and reworked to allow easy support
  of other similar devices.  Support for HMC5983 added via both i2c and SPI.
* Rework of Exynos driver to simplify extension to support more devices.
* Addition of support for the Exynos3250 ADC (which requires an additional
  clock)  Support for quite a few more devices on its way.

Cleanups
* ad7997 - a number of cleanups and tweaks to how the events are controlled
  to make it more intuitive.
* kxcjk - cleanups and minor fixes for this new driver.
parents 16fae052 e6ca2d84
......@@ -260,6 +260,10 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
KernelVersion: 2.6.35
......@@ -447,6 +451,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
......@@ -492,6 +504,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en
What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
......@@ -538,6 +558,14 @@ What: /sys/.../events/in_magn_y_raw_thresh_rising_value
What: /sys/.../events/in_magn_y_raw_thresh_falling_value
What: /sys/.../events/in_magn_z_raw_thresh_rising_value
What: /sys/.../events/in_magn_z_raw_thresh_falling_value
What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value
What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value
What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value
What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value
What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value
What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value
What: /sys/.../events/in_voltageY_raw_thresh_rising_value
......@@ -588,6 +616,18 @@ What: /sys/.../events/in_magn_y_thresh_either_hysteresis
What: /sys/.../events/in_magn_z_thresh_rising_hysteresis
What: /sys/.../events/in_magn_z_thresh_falling_hysteresis
What: /sys/.../events/in_magn_z_thresh_either_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis
What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis
What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis
What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis
What: /sys/.../events/in_voltageY_thresh_rising_hysteresis
What: /sys/.../events/in_voltageY_thresh_falling_hysteresis
What: /sys/.../events/in_voltageY_thresh_either_hysteresis
......@@ -635,6 +675,14 @@ What: /sys/.../events/in_magn_y_raw_roc_rising_value
What: /sys/.../events/in_magn_y_raw_roc_falling_value
What: /sys/.../events/in_magn_z_raw_roc_rising_value
What: /sys/.../events/in_magn_z_raw_roc_falling_value
What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value
What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value
What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value
What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value
What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value
What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value
What: /sys/.../events/in_voltageY_raw_roc_rising_value
......@@ -690,6 +738,22 @@ What: /sys/.../events/in_magn_z_thresh_rising_period
What: /sys/.../events/in_magn_z_thresh_falling_period
What: /sys/.../events/in_magn_z_roc_rising_period
What: /sys/.../events/in_magn_z_roc_falling_period
What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period
What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period
What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period
What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period
What: /sys/.../events/in_rot_from_north_true_thresh_rising_period
What: /sys/.../events/in_rot_from_north_true_thresh_falling_period
What: /sys/.../events/in_rot_from_north_true_roc_rising_period
What: /sys/.../events/in_rot_from_north_true_roc_falling_period
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period
What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period
What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period
What: /sys/.../events/in_voltageY_supply_thresh_rising_period
What: /sys/.../events/in_voltageY_supply_thresh_falling_period
What: /sys/.../events/in_voltageY_supply_roc_rising_period
......@@ -787,6 +851,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en
What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en
What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en
......@@ -853,6 +921,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index
What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index
What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index
What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index
......@@ -946,3 +1018,13 @@ Description:
x y z w. Here x, y, and z component represents the axis about
which a rotation will occur and w component represents the
amount of rotation.
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw
KernelVersion: 3.15
Contact: linux-iio@vger.kernel.org
Description:
Raw value of rotation from true/magnetic north measured with
or without compensation from tilt sensors.
......@@ -14,14 +14,21 @@ Required properties:
for exynos4412/5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
- reg: Contains ADC register address range (base address and
length) and the address of the phy enable register.
- interrupts: Contains the interrupt information for the timer. The
format is being dependent on which interrupt controller
the Samsung device uses.
- #io-channel-cells = <1>; As ADC has multiple outputs
- clocks From common clock binding: handle to adc clock.
- clock-names From common clock binding: Shall be "adc".
- clocks From common clock bindings: handles to clocks specified
in "clock-names" property, in the same order.
- clock-names From common clock bindings: list of clock input names
used by ADC block:
- "adc" : ADC bus clock
- "sclk" : ADC special clock (only for Exynos3250 and
compatible ADC block)
- vdd-supply VDD input supply.
Note: child nodes can be added for auto probing from device tree.
......@@ -41,6 +48,20 @@ adc: adc@12D10000 {
vdd-supply = <&buck5_reg>;
};
Example: adding device info in dtsi file for Exynos3250 with additional sclk
adc: adc@126C0000 {
compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupts = <0 137 0>;
#io-channel-cells = <1>;
io-channel-ranges;
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
clock-names = "adc", "sclk";
vdd-supply = <&buck5_reg>;
};
Example: Adding child nodes in dts file
......
......@@ -6,6 +6,7 @@ Required properties:
Other models which are supported with driver are:
"honeywell,hmc5883"
"honeywell,hmc5883l"
"honeywell,hmc5983"
- reg : the I2C address of the magnetometer - typically 0x1e
Optional properties:
......
......@@ -261,10 +261,11 @@ pdma1: pdma@12690000 {
};
adc: adc@126C0000 {
compatible = "samsung,exynos-adc-v3";
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupts = <0 137 0>;
clock-names = "adc", "sclk_tsadc";
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
io-channel-ranges;
......
......@@ -98,7 +98,7 @@ static const struct {
int val2;
int odr_bits;
} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09},
{3, 125000, 0x0A}, {6, 25000, 0x0B}, {12, 5000, 0},
{3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0},
{25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03},
{200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06},
{1600, 0, 0x07} };
......@@ -138,19 +138,6 @@ static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
return 0;
}
static int kxcjk1013_chip_ack_intr(struct kxcjk1013_data *data)
{
int ret;
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_rel\n");
return ret;
}
return ret;
}
static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
{
int ret;
......@@ -466,7 +453,7 @@ static const struct attribute_group kxcjk1013_attrs_group = {
.realbits = 12, \
.storagebits = 16, \
.shift = 4, \
.endianness = IIO_LE, \
.endianness = IIO_CPU, \
}, \
}
......@@ -498,15 +485,11 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
indio_dev->masklength) {
ret = kxcjk1013_get_acc_reg(data, bit);
if (ret < 0) {
kxcjk1013_chip_ack_intr(data);
mutex_unlock(&data->mutex);
goto err;
}
data->buffer[i++] = ret;
}
kxcjk1013_chip_ack_intr(data);
mutex_unlock(&data->mutex);
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
......@@ -517,6 +500,21 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
return IRQ_HANDLED;
}
static int kxcjk1013_trig_try_reen(struct iio_trigger *trig)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct kxcjk1013_data *data = iio_priv(indio_dev);
int ret;
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_rel\n");
return ret;
}
return 0;
}
static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
......@@ -543,6 +541,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
static const struct iio_trigger_ops kxcjk1013_trigger_ops = {
.set_trigger_state = kxcjk1013_data_rdy_trigger_set_state,
.try_reenable = kxcjk1013_trig_try_reen,
.owner = THIS_MODULE,
};
......@@ -645,6 +644,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
iio_trigger_set_drvdata(trig, indio_dev);
data->trig = trig;
indio_dev->trig = trig;
iio_trigger_get(indio_dev->trig);
ret = iio_trigger_register(trig);
if (ret)
......
......@@ -32,6 +32,7 @@
#include <linux/types.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
......@@ -41,7 +42,7 @@
#include <linux/iio/triggered_buffer.h>
#define AD799X_CHANNEL_SHIFT 4
#define AD799X_STORAGEBITS 16
/*
* AD7991, AD7995 and AD7999 defines
*/
......@@ -55,10 +56,10 @@
* AD7992, AD7993, AD7994, AD7997 and AD7998 defines
*/
#define AD7998_FLTR 0x08
#define AD7998_ALERT_EN 0x04
#define AD7998_BUSY_ALERT 0x02
#define AD7998_BUSY_ALERT_POL 0x01
#define AD7998_FLTR BIT(3)
#define AD7998_ALERT_EN BIT(2)
#define AD7998_BUSY_ALERT BIT(1)
#define AD7998_BUSY_ALERT_POL BIT(0)
#define AD7998_CONV_RES_REG 0x0
#define AD7998_ALERT_STAT_REG 0x1
......@@ -69,7 +70,7 @@
#define AD7998_DATAHIGH_REG(x) ((x) * 3 + 0x5)
#define AD7998_HYST_REG(x) ((x) * 3 + 0x6)
#define AD7998_CYC_MASK 0x7
#define AD7998_CYC_MASK GENMASK(2, 0)
#define AD7998_CYC_DIS 0x0
#define AD7998_CYC_TCONF_32 0x1
#define AD7998_CYC_TCONF_64 0x2
......@@ -85,10 +86,8 @@
* AD7997 and AD7997 defines
*/
#define AD7997_8_READ_SINGLE 0x80
#define AD7997_8_READ_SEQUENCE 0x70
/* TODO: move this into a common header */
#define RES_MASK(bits) ((1 << (bits)) - 1)
#define AD7997_8_READ_SINGLE BIT(7)
#define AD7997_8_READ_SEQUENCE (BIT(6) | BIT(5) | BIT(4))
enum {
ad7991,
......@@ -102,22 +101,32 @@ enum {
};
/**
* struct ad799x_chip_info - chip specific information
* struct ad799x_chip_config - chip specific information
* @channel: channel specification
* @num_channels: number of channels
* @default_config: device default configuration
* @info: pointer to iio_info struct
*/
struct ad799x_chip_info {
struct iio_chan_spec channel[9];
int num_channels;
struct ad799x_chip_config {
const struct iio_chan_spec channel[9];
u16 default_config;
const struct iio_info *info;
};
/**
* struct ad799x_chip_info - chip specific information
* @num_channels: number of channels
* @noirq_config: device configuration w/o IRQ
* @irq_config: device configuration w/IRQ
*/
struct ad799x_chip_info {
int num_channels;
const struct ad799x_chip_config noirq_config;
const struct ad799x_chip_config irq_config;
};
struct ad799x_state {
struct i2c_client *client;
const struct ad799x_chip_info *chip_info;
const struct ad799x_chip_config *chip_config;
struct regulator *reg;
struct regulator *vref;
unsigned id;
......@@ -127,6 +136,30 @@ struct ad799x_state {
unsigned int transfer_size;
};
static int ad799x_write_config(struct ad799x_state *st, u16 val)
{
switch (st->id) {
case ad7997:
case ad7998:
return i2c_smbus_write_word_swapped(st->client, AD7998_CONF_REG,
val);
default:
return i2c_smbus_write_byte_data(st->client, AD7998_CONF_REG,
val);
}
}
static int ad799x_read_config(struct ad799x_state *st)
{
switch (st->id) {
case ad7997:
case ad7998:
return i2c_smbus_read_word_swapped(st->client, AD7998_CONF_REG);
default:
return i2c_smbus_read_byte_data(st->client, AD7998_CONF_REG);
}
}
/**
* ad799x_trigger_handler() bh of trigger launched polling to ring buffer
*
......@@ -175,66 +208,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
return IRQ_HANDLED;
}
/*
* ad799x register access by I2C
*/
static int ad799x_i2c_read16(struct ad799x_state *st, u8 reg, u16 *data)
{
struct i2c_client *client = st->client;
int ret = 0;
ret = i2c_smbus_read_word_swapped(client, reg);
if (ret < 0) {
dev_err(&client->dev, "I2C read error\n");
return ret;
}
*data = (u16)ret;
return 0;
}
static int ad799x_i2c_read8(struct ad799x_state *st, u8 reg, u8 *data)
{
struct i2c_client *client = st->client;
int ret = 0;
ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
dev_err(&client->dev, "I2C read error\n");
return ret;
}
*data = (u8)ret;
return 0;
}
static int ad799x_i2c_write16(struct ad799x_state *st, u8 reg, u16 data)
{
struct i2c_client *client = st->client;
int ret = 0;
ret = i2c_smbus_write_word_swapped(client, reg, data);
if (ret < 0)
dev_err(&client->dev, "I2C write error\n");
return ret;
}
static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data)
{
struct i2c_client *client = st->client;
int ret = 0;
ret = i2c_smbus_write_byte_data(client, reg, data);
if (ret < 0)
dev_err(&client->dev, "I2C write error\n");
return ret;
}
static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
static int ad799x_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct ad799x_state *st = iio_priv(indio_dev);
......@@ -247,33 +221,33 @@ static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
st->transfer_size = bitmap_weight(scan_mask, indio_dev->masklength) * 2;
switch (st->id) {
case ad7992:
case ad7993:
case ad7994:
case ad7997:
case ad7998:
return ad799x_i2c_write16(st, AD7998_CONF_REG,
st->config | (*scan_mask << AD799X_CHANNEL_SHIFT));
st->config &= ~(GENMASK(7, 0) << AD799X_CHANNEL_SHIFT);
st->config |= (*scan_mask << AD799X_CHANNEL_SHIFT);
return ad799x_write_config(st, st->config);
default:
break;
return 0;
}
return 0;
}
static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
{
u16 rxbuf;
u8 cmd;
int ret;
switch (st->id) {
case ad7991:
case ad7995:
case ad7999:
cmd = st->config | ((1 << ch) << AD799X_CHANNEL_SHIFT);
cmd = st->config | (BIT(ch) << AD799X_CHANNEL_SHIFT);
break;
case ad7992:
case ad7993:
case ad7994:
cmd = (1 << ch) << AD799X_CHANNEL_SHIFT;
cmd = BIT(ch) << AD799X_CHANNEL_SHIFT;
break;
case ad7997:
case ad7998:
......@@ -283,11 +257,7 @@ static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
return -EINVAL;
}
ret = ad799x_i2c_read16(st, cmd, &rxbuf);
if (ret < 0)
return ret;
return rxbuf;
return i2c_smbus_read_word_swapped(st->client, cmd);
}
static int ad799x_read_raw(struct iio_dev *indio_dev,
......@@ -311,7 +281,7 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
if (ret < 0)
return ret;
*val = (ret >> chan->scan_type.shift) &
RES_MASK(chan->scan_type.realbits);
GENMASK(chan->scan_type.realbits - 1, 0);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
ret = regulator_get_voltage(st->vref);
......@@ -332,6 +302,7 @@ static const unsigned int ad7998_frequencies[] = {
[AD7998_CYC_TCONF_1024] = 488,
[AD7998_CYC_TCONF_2048] = 244,
};
static ssize_t ad799x_read_frequency(struct device *dev,
struct device_attribute *attr,
char *buf)
......@@ -339,15 +310,11 @@ static ssize_t ad799x_read_frequency(struct device *dev,
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad799x_state *st = iio_priv(indio_dev);
int ret;
u8 val;
ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &val);
if (ret)
int ret = i2c_smbus_read_byte_data(st->client, AD7998_CYCLE_TMR_REG);
if (ret < 0)
return ret;
val &= AD7998_CYC_MASK;
return sprintf(buf, "%u\n", ad7998_frequencies[val]);
return sprintf(buf, "%u\n", ad7998_frequencies[ret & AD7998_CYC_MASK]);
}
static ssize_t ad799x_write_frequency(struct device *dev,
......@@ -360,18 +327,17 @@ static ssize_t ad799x_write_frequency(struct device *dev,
long val;
int ret, i;
u8 t;
ret = kstrtol(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&indio_dev->mlock);
ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &t);
if (ret)
ret = i2c_smbus_read_byte_data(st->client, AD7998_CYCLE_TMR_REG);
if (ret < 0)
goto error_ret_mutex;
/* Wipe the bits clean */
t &= ~AD7998_CYC_MASK;
ret &= ~AD7998_CYC_MASK;
for (i = 0; i < ARRAY_SIZE(ad7998_frequencies); i++)
if (val == ad7998_frequencies[i])
......@@ -380,13 +346,17 @@ static ssize_t ad799x_write_frequency(struct device *dev,
ret = -EINVAL;
goto error_ret_mutex;
}
t |= i;
ret = ad799x_i2c_write8(st, AD7998_CYCLE_TMR_REG, t);
ret = i2c_smbus_write_byte_data(st->client, AD7998_CYCLE_TMR_REG,
ret | i);
if (ret < 0)
goto error_ret_mutex;
ret = len;
error_ret_mutex:
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
return ret;
}
static int ad799x_read_event_config(struct iio_dev *indio_dev,
......@@ -394,7 +364,48 @@ static int ad799x_read_event_config(struct iio_dev *indio_dev,
enum iio_event_type type,
enum iio_event_direction dir)
{
return 1;
struct ad799x_state *st = iio_priv(indio_dev);
if (!(st->config & AD7998_ALERT_EN))
return 0;
if ((st->config >> AD799X_CHANNEL_SHIFT) & BIT(chan->scan_index))
return 1;
return 0;
}
static int ad799x_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
int state)
{
struct ad799x_state *st = iio_priv(indio_dev);
int ret;
mutex_lock(&indio_dev->mlock);
if (iio_buffer_enabled(indio_dev)) {
ret = -EBUSY;
goto done;
}
if (state)
st->config |= BIT(chan->scan_index) << AD799X_CHANNEL_SHIFT;
else
st->config &= ~(BIT(chan->scan_index) << AD799X_CHANNEL_SHIFT);
if (st->config >> AD799X_CHANNEL_SHIFT)
st->config |= AD7998_ALERT_EN;
else
st->config &= ~AD7998_ALERT_EN;
ret = ad799x_write_config(st, st->config);
done:
mutex_unlock(&indio_dev->mlock);
return ret;
}
static unsigned int ad799x_threshold_reg(const struct iio_chan_spec *chan,
......@@ -426,11 +437,12 @@ static int ad799x_write_event_value(struct iio_dev *indio_dev,
int ret;
struct ad799x_state *st = iio_priv(indio_dev);
if (val < 0 || val > RES_MASK(chan->scan_type.realbits))
if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = ad799x_i2c_write16(st, ad799x_threshold_reg(chan, dir, info),
ret = i2c_smbus_write_word_swapped(st->client,
ad799x_threshold_reg(chan, dir, info),
val << chan->scan_type.shift);
mutex_unlock(&indio_dev->mlock);
......@@ -446,16 +458,15 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev,
{
int ret;
struct ad799x_state *st = iio_priv(indio_dev);
u16 valin;
mutex_lock(&indio_dev->mlock);
ret = ad799x_i2c_read16(st, ad799x_threshold_reg(chan, dir, info),
&valin);
ret = i2c_smbus_read_word_swapped(st->client,
ad799x_threshold_reg(chan, dir, info));
mutex_unlock(&indio_dev->mlock);
if (ret < 0)
return ret;
*val = (valin >> chan->scan_type.shift) &
RES_MASK(chan->scan_type.realbits);
*val = (ret >> chan->scan_type.shift) &
GENMASK(chan->scan_type.realbits - 1 , 0);
return IIO_VAL_INT;
}
......@@ -464,20 +475,18 @@ static irqreturn_t ad799x_event_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct ad799x_state *st = iio_priv(private);
u8 status;
int i, ret;
ret = ad799x_i2c_read8(st, AD7998_ALERT_STAT_REG, &status);
if (ret)
ret = i2c_smbus_read_byte_data(st->client, AD7998_ALERT_STAT_REG);
if (ret <= 0)
goto done;
if (!status)
if (i2c_smbus_write_byte_data(st->client, AD7998_ALERT_STAT_REG,
AD7998_ALERT_STAT_CLEAR) < 0)
goto done;
ad799x_i2c_write8(st, AD7998_ALERT_STAT_REG, AD7998_ALERT_STAT_CLEAR);
for (i = 0; i < 8; i++) {
if (status & (1 << i))
if (ret & BIT(i))
iio_push_event(indio_dev,
i & 0x1 ?
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
......@@ -516,14 +525,21 @@ static const struct iio_info ad7991_info = {
.driver_module = THIS_MODULE,
};
static const struct iio_info ad7993_4_7_8_info = {
static const struct iio_info ad7993_4_7_8_noirq_info = {
.read_raw = &ad799x_read_raw,
.driver_module = THIS_MODULE,
.update_scan_mode = ad799x_update_scan_mode,
};
static const struct iio_info ad7993_4_7_8_irq_info = {
.read_raw = &ad799x_read_raw,
.event_attrs = &ad799x_event_attrs_group,
.read_event_config = &ad799x_read_event_config,
.write_event_config = &ad799x_write_event_config,
.read_event_value = &ad799x_read_event_value,
.write_event_value = &ad799x_write_event_value,
.driver_module = THIS_MODULE,
.update_scan_mode = ad7997_8_update_scan_mode,
.update_scan_mode = ad799x_update_scan_mode,
};
static const struct iio_event_spec ad799x_events[] = {
......@@ -571,103 +587,175 @@ static const struct iio_event_spec ad799x_events[] = {
static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
[ad7991] = {
.channel = {
AD799X_CHANNEL(0, 12),
AD799X_CHANNEL(1, 12),
AD799X_CHANNEL(2, 12),
AD799X_CHANNEL(3, 12),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.num_channels = 5,
.info = &ad7991_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 12),
AD799X_CHANNEL(1, 12),
AD799X_CHANNEL(2, 12),
AD799X_CHANNEL(3, 12),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.info = &ad7991_info,
},
},
[ad7995] = {
.channel = {
AD799X_CHANNEL(0, 10),
AD799X_CHANNEL(1, 10),
AD799X_CHANNEL(2, 10),
AD799X_CHANNEL(3, 10),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.num_channels = 5,
.info = &ad7991_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 10),
AD799X_CHANNEL(1, 10),
AD799X_CHANNEL(2, 10),
AD799X_CHANNEL(3, 10),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.info = &ad7991_info,
},
},
[ad7999] = {
.channel = {
AD799X_CHANNEL(0, 8),
AD799X_CHANNEL(1, 8),
AD799X_CHANNEL(2, 8),
AD799X_CHANNEL(3, 8),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.num_channels = 5,
.info = &ad7991_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 8),
AD799X_CHANNEL(1, 8),
AD799X_CHANNEL(2, 8),
AD799X_CHANNEL(3, 8),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.info = &ad7991_info,
},
},
[ad7992] = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
IIO_CHAN_SOFT_TIMESTAMP(3),
},
.num_channels = 3,
.default_config = AD7998_ALERT_EN,
.info = &ad7993_4_7_8_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 12),
AD799X_CHANNEL(1, 12),
IIO_CHAN_SOFT_TIMESTAMP(3),
},
.info = &ad7993_4_7_8_noirq_info,
},
.irq_config = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
IIO_CHAN_SOFT_TIMESTAMP(3),
},
.default_config = AD7998_ALERT_EN | AD7998_BUSY_ALERT,
.info = &ad7993_4_7_8_irq_info,
},
},
[ad7993] = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 10),
AD799X_CHANNEL_WITH_EVENTS(1, 10),
AD799X_CHANNEL_WITH_EVENTS(2, 10),
AD799X_CHANNEL_WITH_EVENTS(3, 10),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.num_channels = 5,
.default_config = AD7998_ALERT_EN,
.info = &ad7993_4_7_8_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 10),
AD799X_CHANNEL(1, 10),
AD799X_CHANNEL(2, 10),
AD799X_CHANNEL(3, 10),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.info = &ad7993_4_7_8_noirq_info,
},
.irq_config = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 10),
AD799X_CHANNEL_WITH_EVENTS(1, 10),
AD799X_CHANNEL_WITH_EVENTS(2, 10),
AD799X_CHANNEL_WITH_EVENTS(3, 10),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.default_config = AD7998_ALERT_EN | AD7998_BUSY_ALERT,
.info = &ad7993_4_7_8_irq_info,
},
},
[ad7994] = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
AD799X_CHANNEL_WITH_EVENTS(2, 12),
AD799X_CHANNEL_WITH_EVENTS(3, 12),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.num_channels = 5,
.default_config = AD7998_ALERT_EN,
.info = &ad7993_4_7_8_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 12),
AD799X_CHANNEL(1, 12),
AD799X_CHANNEL(2, 12),
AD799X_CHANNEL(3, 12),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.info = &ad7993_4_7_8_noirq_info,
},
.irq_config = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
AD799X_CHANNEL_WITH_EVENTS(2, 12),
AD799X_CHANNEL_WITH_EVENTS(3, 12),
IIO_CHAN_SOFT_TIMESTAMP(4),
},
.default_config = AD7998_ALERT_EN | AD7998_BUSY_ALERT,
.info = &ad7993_4_7_8_irq_info,
},
},
[ad7997] = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 10),
AD799X_CHANNEL_WITH_EVENTS(1, 10),
AD799X_CHANNEL_WITH_EVENTS(2, 10),
AD799X_CHANNEL_WITH_EVENTS(3, 10),
AD799X_CHANNEL(4, 10),
AD799X_CHANNEL(5, 10),
AD799X_CHANNEL(6, 10),
AD799X_CHANNEL(7, 10),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.num_channels = 9,
.default_config = AD7998_ALERT_EN,
.info = &ad7993_4_7_8_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 10),
AD799X_CHANNEL(1, 10),
AD799X_CHANNEL(2, 10),
AD799X_CHANNEL(3, 10),
AD799X_CHANNEL(4, 10),
AD799X_CHANNEL(5, 10),
AD799X_CHANNEL(6, 10),
AD799X_CHANNEL(7, 10),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.info = &ad7993_4_7_8_noirq_info,
},
.irq_config = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 10),
AD799X_CHANNEL_WITH_EVENTS(1, 10),
AD799X_CHANNEL_WITH_EVENTS(2, 10),
AD799X_CHANNEL_WITH_EVENTS(3, 10),
AD799X_CHANNEL(4, 10),
AD799X_CHANNEL(5, 10),
AD799X_CHANNEL(6, 10),
AD799X_CHANNEL(7, 10),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.default_config = AD7998_ALERT_EN | AD7998_BUSY_ALERT,
.info = &ad7993_4_7_8_irq_info,
},
},
[ad7998] = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
AD799X_CHANNEL_WITH_EVENTS(2, 12),
AD799X_CHANNEL_WITH_EVENTS(3, 12),
AD799X_CHANNEL(4, 12),
AD799X_CHANNEL(5, 12),
AD799X_CHANNEL(6, 12),
AD799X_CHANNEL(7, 12),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.num_channels = 9,
.default_config = AD7998_ALERT_EN,
.info = &ad7993_4_7_8_info,
.noirq_config = {
.channel = {
AD799X_CHANNEL(0, 12),
AD799X_CHANNEL(1, 12),
AD799X_CHANNEL(2, 12),
AD799X_CHANNEL(3, 12),
AD799X_CHANNEL(4, 12),
AD799X_CHANNEL(5, 12),
AD799X_CHANNEL(6, 12),
AD799X_CHANNEL(7, 12),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.info = &ad7993_4_7_8_noirq_info,
},
.irq_config = {
.channel = {
AD799X_CHANNEL_WITH_EVENTS(0, 12),
AD799X_CHANNEL_WITH_EVENTS(1, 12),
AD799X_CHANNEL_WITH_EVENTS(2, 12),
AD799X_CHANNEL_WITH_EVENTS(3, 12),
AD799X_CHANNEL(4, 12),
AD799X_CHANNEL(5, 12),
AD799X_CHANNEL(6, 12),
AD799X_CHANNEL(7, 12),
IIO_CHAN_SOFT_TIMESTAMP(8),
},
.default_config = AD7998_ALERT_EN | AD7998_BUSY_ALERT,
.info = &ad7993_4_7_8_irq_info,
},
},
};
......@@ -677,6 +765,8 @@ static int ad799x_probe(struct i2c_client *client,
int ret;
struct ad799x_state *st;
struct iio_dev *indio_dev;
const struct ad799x_chip_info *chip_info =
&ad799x_chip_info_tbl[id->driver_data];
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
if (indio_dev == NULL)
......@@ -687,8 +777,10 @@ static int ad799x_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
st->id = id->driver_data;
st->chip_info = &ad799x_chip_info_tbl[st->id];
st->config = st->chip_info->default_config;
if (client->irq > 0 && chip_info->irq_config.info)
st->chip_config = &chip_info->irq_config;
else
st->chip_config = &chip_info->noirq_config;
/* TODO: Add pdata options for filtering and bit delay */
......@@ -711,11 +803,19 @@ static int ad799x_probe(struct i2c_client *client,
indio_dev->dev.parent = &client->dev;
indio_dev->name = id->name;
indio_dev->info = st->chip_info->info;
indio_dev->info = st->chip_config->info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = st->chip_info->channel;
indio_dev->num_channels = st->chip_info->num_channels;
indio_dev->channels = st->chip_config->channel;
indio_dev->num_channels = chip_info->num_channels;
ret = ad799x_write_config(st, st->chip_config->default_config);
if (ret < 0)
goto error_disable_reg;
ret = ad799x_read_config(st);
if (ret < 0)
goto error_disable_reg;
st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&ad799x_trigger_handler, NULL);
......
......@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/io.h>
......@@ -39,11 +40,6 @@
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
enum adc_version {
ADC_V1,
ADC_V2
};
/* EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
#define ADC_V1_DLY(x) ((x) + 0x08)
......@@ -75,8 +71,9 @@ enum adc_version {
#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
#define ADC_V2_CON2_ACH_MASK 0xF
#define MAX_ADC_V2_CHANNELS 10
#define MAX_ADC_V1_CHANNELS 8
#define MAX_ADC_V2_CHANNELS 10
#define MAX_ADC_V1_CHANNELS 8
#define MAX_EXYNOS3250_ADC_CHANNELS 2
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
......@@ -85,9 +82,12 @@ enum adc_version {
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
void __iomem *regs;
void __iomem *enable_reg;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
struct regulator *vdd;
......@@ -97,43 +97,213 @@ struct exynos_adc {
unsigned int version;
};
static const struct of_device_id exynos_adc_match[] = {
{ .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
{ .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
{},
struct exynos_adc_data {
int num_channels;
bool needs_sclk;
void (*init_hw)(struct exynos_adc *info);
void (*exit_hw)(struct exynos_adc *info);
void (*clear_irq)(struct exynos_adc *info);
void (*start_conv)(struct exynos_adc *info, unsigned long addr);
};
MODULE_DEVICE_TABLE(of, exynos_adc_match);
static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
static void exynos_adc_unprepare_clk(struct exynos_adc *info)
{
const struct of_device_id *match;
if (info->data->needs_sclk)
clk_unprepare(info->sclk);
clk_unprepare(info->clk);
}
match = of_match_node(exynos_adc_match, pdev->dev.of_node);
return (unsigned int)match->data;
static int exynos_adc_prepare_clk(struct exynos_adc *info)
{
int ret;
ret = clk_prepare(info->clk);
if (ret) {
dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
return ret;
}
if (info->data->needs_sclk) {
ret = clk_prepare(info->sclk);
if (ret) {
clk_unprepare(info->clk);
dev_err(info->dev,
"failed preparing sclk_adc clock: %d\n", ret);
return ret;
}
}
return 0;
}
static void exynos_adc_disable_clk(struct exynos_adc *info)
{
if (info->data->needs_sclk)
clk_disable(info->sclk);
clk_disable(info->clk);
}
static int exynos_adc_enable_clk(struct exynos_adc *info)
{
int ret;
ret = clk_enable(info->clk);
if (ret) {
dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
return ret;
}
if (info->data->needs_sclk) {
ret = clk_enable(info->sclk);
if (ret) {
clk_disable(info->clk);
dev_err(info->dev,
"failed enabling sclk_adc clock: %d\n", ret);
return ret;
}
}
return 0;
}
static void exynos_adc_v1_init_hw(struct exynos_adc *info)
{
u32 con1;
writel(1, info->enable_reg);
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
}
static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
{
u32 con;
writel(0, info->enable_reg);
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
writel(con, ADC_V1_CON(info->regs));
}
static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
{
writel(1, ADC_V1_INTCLR(info->regs));
}
static void exynos_adc_v1_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1;
writel(addr, ADC_V1_MUX(info->regs));
con1 = readl(ADC_V1_CON(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.clear_irq = exynos_adc_v1_clear_irq,
.start_conv = exynos_adc_v1_start_conv,
};
static void exynos_adc_v2_init_hw(struct exynos_adc *info)
{
u32 con1, con2;
writel(1, info->enable_reg);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
writel(con2, ADC_V2_CON2(info->regs));
/* Enable interrupts */
writel(1, ADC_V2_INT_EN(info->regs));
}
static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
{
u32 con;
writel(0, info->enable_reg);
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
writel(con, ADC_V2_CON1(info->regs));
}
static void exynos_adc_hw_init(struct exynos_adc *info)
static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
{
writel(1, ADC_V2_INT_ST(info->regs));
}
static void exynos_adc_v2_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1, con2;
if (info->version == ADC_V2) {
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
con2 = readl(ADC_V2_CON2(info->regs));
con2 &= ~ADC_V2_CON2_ACH_MASK;
con2 |= ADC_V2_CON2_ACH_SEL(addr);
writel(con2, ADC_V2_CON2(info->regs));
con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
writel(con2, ADC_V2_CON2(info->regs));
con1 = readl(ADC_V2_CON1(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
}
/* Enable interrupts */
writel(1, ADC_V2_INT_EN(info->regs));
} else {
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
static const struct exynos_adc_data exynos_adc_v2_data = {
.num_channels = MAX_ADC_V2_CHANNELS,
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
}
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
.clear_irq = exynos_adc_v2_clear_irq,
.start_conv = exynos_adc_v2_start_conv,
};
static const struct exynos_adc_data exynos3250_adc_data = {
.num_channels = MAX_EXYNOS3250_ADC_CHANNELS,
.needs_sclk = true,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
.clear_irq = exynos_adc_v2_clear_irq,
.start_conv = exynos_adc_v2_start_conv,
};
static const struct of_device_id exynos_adc_match[] = {
{
.compatible = "samsung,exynos-adc-v1",
.data = &exynos_adc_v1_data,
}, {
.compatible = "samsung,exynos-adc-v2",
.data = &exynos_adc_v2_data,
}, {
.compatible = "samsung,exynos3250-adc",
.data = &exynos3250_adc_data,
},
{},
};
MODULE_DEVICE_TABLE(of, exynos_adc_match);
static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
{
const struct of_device_id *match;
match = of_match_node(exynos_adc_match, pdev->dev.of_node);
return (struct exynos_adc_data *)match->data;
}
static int exynos_read_raw(struct iio_dev *indio_dev,
......@@ -144,7 +314,6 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
{
struct exynos_adc *info = iio_priv(indio_dev);
unsigned long timeout;
u32 con1, con2;
int ret;
if (mask != IIO_CHAN_INFO_RAW)
......@@ -154,28 +323,15 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
reinit_completion(&info->completion);
/* Select the channel to be used and Trigger conversion */
if (info->version == ADC_V2) {
con2 = readl(ADC_V2_CON2(info->regs));
con2 &= ~ADC_V2_CON2_ACH_MASK;
con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
writel(con2, ADC_V2_CON2(info->regs));
con1 = readl(ADC_V2_CON1(info->regs));
writel(con1 | ADC_CON_EN_START,
ADC_V2_CON1(info->regs));
} else {
writel(chan->address, ADC_V1_MUX(info->regs));
con1 = readl(ADC_V1_CON(info->regs));
writel(con1 | ADC_CON_EN_START,
ADC_V1_CON(info->regs));
}
if (info->data->start_conv)
info->data->start_conv(info, chan->address);
timeout = wait_for_completion_timeout
(&info->completion, EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
exynos_adc_hw_init(info);
if (info->data->init_hw)
info->data->init_hw(info);
ret = -ETIMEDOUT;
} else {
*val = info->value;
......@@ -193,13 +349,11 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
struct exynos_adc *info = (struct exynos_adc *)dev_id;
/* Read value */
info->value = readl(ADC_V1_DATX(info->regs)) &
ADC_DATX_MASK;
info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK;
/* clear irq */
if (info->version == ADC_V2)
writel(1, ADC_V2_INT_ST(info->regs));
else
writel(1, ADC_V1_INTCLR(info->regs));
if (info->data->clear_irq)
info->data->clear_irq(info);
complete(&info->completion);
......@@ -277,6 +431,12 @@ static int exynos_adc_probe(struct platform_device *pdev)
info = iio_priv(indio_dev);
info->data = exynos_adc_get_data(pdev);
if (!info->data) {
dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
return -EINVAL;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(info->regs))
......@@ -294,6 +454,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
}
info->irq = irq;
info->dev = &pdev->dev;
init_completion(&info->completion);
......@@ -304,6 +465,16 @@ static int exynos_adc_probe(struct platform_device *pdev)
return PTR_ERR(info->clk);
}
if (info->data->needs_sclk) {
info->sclk = devm_clk_get(&pdev->dev, "sclk");
if (IS_ERR(info->sclk)) {
dev_err(&pdev->dev,
"failed getting sclk clock, err = %ld\n",
PTR_ERR(info->sclk));
return PTR_ERR(info->sclk);
}
}
info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) {
dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
......@@ -315,13 +486,13 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (ret)
return ret;
ret = clk_prepare_enable(info->clk);
ret = exynos_adc_prepare_clk(info);
if (ret)
goto err_disable_reg;
writel(1, info->enable_reg);
info->version = exynos_adc_get_version(pdev);
ret = exynos_adc_enable_clk(info);
if (ret)
goto err_unprepare_clk;
platform_set_drvdata(pdev, indio_dev);
......@@ -331,11 +502,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
indio_dev->info = &exynos_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = exynos_adc_iio_channels;
if (info->version == ADC_V1)
indio_dev->num_channels = MAX_ADC_V1_CHANNELS;
else
indio_dev->num_channels = MAX_ADC_V2_CHANNELS;
indio_dev->num_channels = info->data->num_channels;
ret = request_irq(info->irq, exynos_adc_isr,
0, dev_name(&pdev->dev), info);
......@@ -349,7 +516,8 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (ret)
goto err_irq;
exynos_adc_hw_init(info);
if (info->data->init_hw)
info->data->init_hw(info);
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
......@@ -366,8 +534,11 @@ static int exynos_adc_probe(struct platform_device *pdev)
err_irq:
free_irq(info->irq, info);
err_disable_clk:
writel(0, info->enable_reg);
clk_disable_unprepare(info->clk);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
err_unprepare_clk:
exynos_adc_unprepare_clk(info);
err_disable_reg:
regulator_disable(info->vdd);
return ret;
......@@ -382,8 +553,10 @@ static int exynos_adc_remove(struct platform_device *pdev)
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
free_irq(info->irq, info);
writel(0, info->enable_reg);
clk_disable_unprepare(info->clk);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
exynos_adc_unprepare_clk(info);
regulator_disable(info->vdd);
return 0;
......@@ -394,20 +567,10 @@ static int exynos_adc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct exynos_adc *info = iio_priv(indio_dev);
u32 con;
if (info->version == ADC_V2) {
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
writel(con, ADC_V2_CON1(info->regs));
} else {
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
writel(con, ADC_V1_CON(info->regs));
}
writel(0, info->enable_reg);
clk_disable_unprepare(info->clk);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
regulator_disable(info->vdd);
return 0;
......@@ -423,12 +586,12 @@ static int exynos_adc_resume(struct device *dev)
if (ret)
return ret;
ret = clk_prepare_enable(info->clk);
ret = exynos_adc_enable_clk(info);
if (ret)
return ret;
writel(1, info->enable_reg);
exynos_adc_hw_init(info);
if (info->data->init_hw)
info->data->init_hw(info);
return 0;
}
......
......@@ -87,6 +87,10 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_QUATERNION] = "quaternion",
[IIO_MOD_TEMP_AMBIENT] = "ambient",
[IIO_MOD_TEMP_OBJECT] = "object",
[IIO_MOD_NORTH_MAGN] = "from_north_magnetic",
[IIO_MOD_NORTH_TRUE] = "from_north_true",
[IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
[IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
};
/* relies on pairs of these shared then separate */
......
......@@ -35,6 +35,10 @@ enum magn_3d_channel {
CHANNEL_SCAN_INDEX_X,
CHANNEL_SCAN_INDEX_Y,
CHANNEL_SCAN_INDEX_Z,
CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP,
CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP,
CHANNEL_SCAN_INDEX_NORTH_MAGN,
CHANNEL_SCAN_INDEX_NORTH_TRUE,
MAGN_3D_CHANNEL_MAX,
};
......@@ -42,7 +46,12 @@ struct magn_3d_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
u32 magn_val[MAGN_3D_CHANNEL_MAX];
/* dynamically sized array to hold sensor values */
u32 *iio_vals;
/* array of pointers to sensor value */
u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
......@@ -52,7 +61,11 @@ struct magn_3d_state {
static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS,
HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS,
HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS
HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS,
HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH,
HID_USAGE_SENSOR_ORIENT_MAGN_NORTH,
HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
};
/* Channel definitions */
......@@ -66,7 +79,6 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
.scan_index = CHANNEL_SCAN_INDEX_X,
}, {
.type = IIO_MAGN,
.modified = 1,
......@@ -76,7 +88,6 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
.scan_index = CHANNEL_SCAN_INDEX_Y,
}, {
.type = IIO_MAGN,
.modified = 1,
......@@ -86,7 +97,42 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
.scan_index = CHANNEL_SCAN_INDEX_Z,
}, {
.type = IIO_ROT,
.modified = 1,
.channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
}, {
.type = IIO_ROT,
.modified = 1,
.channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
}, {
.type = IIO_ROT,
.modified = 1,
.channel2 = IIO_MOD_NORTH_MAGN,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
}, {
.type = IIO_ROT,
.modified = 1,
.channel2 = IIO_MOD_NORTH_TRUE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
}
};
......@@ -126,8 +172,8 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
msleep_interruptible(poll_value * 2);
report_id =
magn_state->magn[chan->scan_index].report_id;
address = magn_3d_addresses[chan->scan_index];
magn_state->magn[chan->address].report_id;
address = magn_3d_addresses[chan->address];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
magn_state->common_attributes.hsdev,
......@@ -218,8 +264,8 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
if (atomic_read(&magn_state->common_attributes.data_ready))
hid_sensor_push_data(indio_dev,
magn_state->magn_val,
sizeof(magn_state->magn_val));
magn_state->iio_vals,
sizeof(magn_state->iio_vals));
return 0;
}
......@@ -233,52 +279,126 @@ static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct magn_3d_state *magn_state = iio_priv(indio_dev);
int offset;
int ret = -EINVAL;
int ret = 0;
u32 *iio_val = NULL;
switch (usage_id) {
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
offset = usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS;
magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] =
*(u32 *)raw_data;
ret = 0;
offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS)
+ CHANNEL_SCAN_INDEX_X;
break;
case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH:
case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH:
case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH:
case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH:
offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH)
+ CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP;
break;
default:
break;
return -EINVAL;
}
iio_val = magn_state->magn_val_addr[offset];
if (iio_val != NULL)
*iio_val = *((u32 *)raw_data);
else
ret = -EINVAL;
return ret;
}
/* Parse report which is specific to an usage id*/
static int magn_3d_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
struct iio_chan_spec *channels,
struct iio_chan_spec **channels,
int *chan_count,
unsigned usage_id,
struct magn_3d_state *st)
{
int ret;
int i;
int attr_count = 0;
struct iio_chan_spec *_channels;
/* Scan for each usage attribute supported */
for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
int status;
u32 address = magn_3d_addresses[i];
/* Check if usage attribute exists in the sensor hub device */
status = sensor_hub_input_get_attribute_info(hsdev,
HID_INPUT_REPORT,
usage_id,
address,
&(st->magn[i]));
if (!status)
attr_count++;
}
for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
ret = sensor_hub_input_get_attribute_info(hsdev,
HID_INPUT_REPORT,
usage_id,
HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS + i,
&st->magn[CHANNEL_SCAN_INDEX_X + i]);
if (ret < 0)
break;
magn_3d_adjust_channel_bit_mask(channels,
CHANNEL_SCAN_INDEX_X + i,
st->magn[CHANNEL_SCAN_INDEX_X + i].size);
if (attr_count <= 0) {
dev_err(&pdev->dev,
"failed to find any supported usage attributes in report\n");
return -EINVAL;
}
dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n",
dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
attr_count);
dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
st->magn[0].index,
st->magn[0].report_id,
st->magn[1].index, st->magn[1].report_id,
st->magn[2].index, st->magn[2].report_id);
/* Setup IIO channel array */
_channels = devm_kcalloc(&pdev->dev, attr_count,
sizeof(struct iio_chan_spec),
GFP_KERNEL);
if (!_channels) {
dev_err(&pdev->dev,
"failed to allocate space for iio channels\n");
return -ENOMEM;
}
st->iio_vals = devm_kcalloc(&pdev->dev, attr_count,
sizeof(u32),
GFP_KERNEL);
if (!st->iio_vals) {
dev_err(&pdev->dev,
"failed to allocate space for iio values array\n");
return -ENOMEM;
}
for (i = 0, *chan_count = 0;
i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
i++){
if (st->magn[i].index >= 0) {
/* Setup IIO channel struct */
(_channels[*chan_count]) = magn_3d_channels[i];
(_channels[*chan_count]).scan_index = *chan_count;
(_channels[*chan_count]).address = i;
/* Set magn_val_addr to iio value address */
st->magn_val_addr[i] = &(st->iio_vals[*chan_count]);
magn_3d_adjust_channel_bit_mask(_channels,
*chan_count,
st->magn[i].size);
(*chan_count)++;
}
}
if (*chan_count <= 0) {
dev_err(&pdev->dev,
"failed to find any magnetic channels setup\n");
return -EINVAL;
}
*channels = _channels;
dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
*chan_count);
st->scale_precision = hid_sensor_format_scale(
HID_USAGE_SENSOR_COMPASS_3D,
&st->magn[CHANNEL_SCAN_INDEX_X],
......@@ -296,7 +416,7 @@ static int magn_3d_parse_report(struct platform_device *pdev,
st->common_attributes.sensitivity.report_id);
}
return ret;
return 0;
}
/* Function to initialize the processing for usage id */
......@@ -308,6 +428,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
struct magn_3d_state *magn_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_chan_spec *channels;
int chan_count = 0;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct magn_3d_state));
......@@ -328,22 +449,16 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
return ret;
}
channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels),
GFP_KERNEL);
if (!channels) {
dev_err(&pdev->dev, "failed to duplicate channels\n");
return -ENOMEM;
}
ret = magn_3d_parse_report(pdev, hsdev, channels,
ret = magn_3d_parse_report(pdev, hsdev,
&channels, &chan_count,
HID_USAGE_SENSOR_COMPASS_3D, magn_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
goto error_free_dev_mem;
dev_err(&pdev->dev, "failed to parse report\n");
return ret;
}
indio_dev->channels = channels;
indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels);
indio_dev->num_channels = chan_count;
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &magn_3d_info;
indio_dev->name = name;
......@@ -353,7 +468,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
NULL, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
goto error_free_dev_mem;
return ret;
}
atomic_set(&magn_state->common_attributes.data_ready, 0);
ret = hid_sensor_setup_trigger(indio_dev, name,
......@@ -387,8 +502,6 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
kfree(indio_dev->channels);
return ret;
}
......@@ -403,7 +516,6 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
return 0;
}
......
......@@ -4,15 +4,37 @@
menu "Magnetometer sensors"
config SENSORS_HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config SENSORS_HMC5843_I2C
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
depends on I2C
select SENSORS_HMC5843
select REGMAP_I2C
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
To compile this driver as a module, choose M here: the module
will be called hmc5843.
This driver can also be compiled as a set of modules.
If so, these modules will be created:
- hmc5843_core (core functions)
- hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
config SENSORS_HMC5843_SPI
tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
depends on SPI_MASTER
select SENSORS_HMC5843
select REGMAP_SPI
help
Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
(digital compass).
This driver can also be compiled as a set of modules.
If so, these modules will be created:
- hmc5843_core (core functions)
- hmc5843_spi (support for HMC5983)
endmenu
......@@ -2,4 +2,6 @@
# Makefile for industrial I/O Magnetometer sensors
#
obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o
/*
* Header file for hmc5843 driver
*
* Split from hmc5843.c
* Copyright (C) Josef Gajdusek <atx@atx.name>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* */
#ifndef HMC5843_CORE_H
#define HMC5843_CORE_H
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#define HMC5843_CONFIG_REG_A 0x00
#define HMC5843_CONFIG_REG_B 0x01
#define HMC5843_MODE_REG 0x02
#define HMC5843_DATA_OUT_MSB_REGS 0x03
#define HMC5843_STATUS_REG 0x09
#define HMC5843_ID_REG 0x0a
#define HMC5843_ID_END 0x0c
enum hmc5843_ids {
HMC5843_ID,
HMC5883_ID,
HMC5883L_ID,
HMC5983_ID,
};
struct hmc5843_data {
struct device *dev;
struct mutex lock;
struct regmap *regmap;
const struct hmc5843_chip_info *variant;
__be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
};
int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
enum hmc5843_ids id);
int hmc5843_common_remove(struct device *dev);
int hmc5843_common_suspend(struct device *dev);
int hmc5843_common_resume(struct device *dev);
#ifdef CONFIG_PM_SLEEP
static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
hmc5843_common_suspend,
hmc5843_common_resume);
#define HMC5843_PM_OPS (&hmc5843_pm_ops)
#else
#define HMC5843_PM_OPS NULL
#endif
#endif /* HMC5843_CORE_H */
......@@ -4,6 +4,8 @@
Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>.
Split to multiple files by Josef Gajdusek <atx@atx.name> - 2014
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
......@@ -20,7 +22,7 @@
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger_consumer.h>
......@@ -28,18 +30,7 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/delay.h>
#define HMC5843_CONFIG_REG_A 0x00
#define HMC5843_CONFIG_REG_B 0x01
#define HMC5843_MODE_REG 0x02
#define HMC5843_DATA_OUT_MSB_REGS 0x03
#define HMC5843_STATUS_REG 0x09
#define HMC5843_ID_REG 0x0a
enum hmc5843_ids {
HMC5843_ID,
HMC5883_ID,
HMC5883L_ID,
};
#include "hmc5843.h"
/*
* Range gain settings in (+-)Ga
......@@ -48,7 +39,7 @@ enum hmc5843_ids {
*/
#define HMC5843_RANGE_GAIN_OFFSET 0x05
#define HMC5843_RANGE_GAIN_DEFAULT 0x01
#define HMC5843_RANGE_GAINS 8
#define HMC5843_RANGE_GAIN_MASK 0xe0
/* Device status */
#define HMC5843_DATA_READY 0x01
......@@ -67,7 +58,7 @@ enum hmc5843_ids {
*/
#define HMC5843_RATE_OFFSET 0x02
#define HMC5843_RATE_DEFAULT 0x04
#define HMC5843_RATES 7
#define HMC5843_RATE_MASK 0x1c
/* Device measurement configuration */
#define HMC5843_MEAS_CONF_NORMAL 0x00
......@@ -76,15 +67,15 @@ enum hmc5843_ids {
#define HMC5843_MEAS_CONF_MASK 0x03
/* Scaling factors: 10000000/Gain */
static const int hmc5843_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
static const int hmc5843_regval_to_nanoscale[] = {
6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
};
static const int hmc5883_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
static const int hmc5883_regval_to_nanoscale[] = {
7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
};
static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
static const int hmc5883l_regval_to_nanoscale[] = {
7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
};
......@@ -101,32 +92,27 @@ static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
* 6 | 50 | 75
* 7 | Not used | Not used
*/
static const int hmc5843_regval_to_samp_freq[7][2] = {
static const int hmc5843_regval_to_samp_freq[][2] = {
{0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0}
};
static const int hmc5883_regval_to_samp_freq[7][2] = {
static const int hmc5883_regval_to_samp_freq[][2] = {
{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
{75, 0}
};
static const int hmc5983_regval_to_samp_freq[][2] = {
{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
{75, 0}, {220, 0}
};
/* Describe chip variants */
struct hmc5843_chip_info {
const struct iio_chan_spec *channels;
const int (*regval_to_samp_freq)[2];
const int n_regval_to_samp_freq;
const int *regval_to_nanoscale;
};
/* Each client has this additional data */
struct hmc5843_data {
struct i2c_client *client;
struct mutex lock;
u8 rate;
u8 meas_conf;
u8 operating_mode;
u8 range;
const struct hmc5843_chip_info *variant;
__be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
const int n_regval_to_nanoscale;
};
/* The lower two bits contain the current conversion mode */
......@@ -135,10 +121,8 @@ static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
int ret;
mutex_lock(&data->lock);
ret = i2c_smbus_write_byte_data(data->client, HMC5843_MODE_REG,
operating_mode & HMC5843_MODE_MASK);
if (ret >= 0)
data->operating_mode = operating_mode;
ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG,
HMC5843_MODE_MASK, operating_mode);
mutex_unlock(&data->lock);
return ret;
......@@ -146,21 +130,21 @@ static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
static int hmc5843_wait_measurement(struct hmc5843_data *data)
{
s32 result;
int tries = 150;
int val;
int ret;
while (tries-- > 0) {
result = i2c_smbus_read_byte_data(data->client,
HMC5843_STATUS_REG);
if (result < 0)
return result;
if (result & HMC5843_DATA_READY)
ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val);
if (ret < 0)
return ret;
if (val & HMC5843_DATA_READY)
break;
msleep(20);
}
if (tries < 0) {
dev_err(&data->client->dev, "data not ready\n");
dev_err(data->dev, "data not ready\n");
return -EIO;
}
......@@ -171,20 +155,20 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data)
static int hmc5843_read_measurement(struct hmc5843_data *data,
int idx, int *val)
{
s32 result;
__be16 values[3];
int ret;
mutex_lock(&data->lock);
result = hmc5843_wait_measurement(data);
if (result < 0) {
ret = hmc5843_wait_measurement(data);
if (ret < 0) {
mutex_unlock(&data->lock);
return result;
return ret;
}
result = i2c_smbus_read_i2c_block_data(data->client,
HMC5843_DATA_OUT_MSB_REGS, sizeof(values), (u8 *) values);
ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS,
values, sizeof(values));
mutex_unlock(&data->lock);
if (result < 0)
return -EINVAL;
if (ret < 0)
return ret;
*val = sign_extend32(be16_to_cpu(values[idx]), 15);
return IIO_VAL_INT;
......@@ -208,16 +192,13 @@ static int hmc5843_read_measurement(struct hmc5843_data *data,
* and BN.
*
*/
static s32 hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
{
int ret;
mutex_lock(&data->lock);
ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
(meas_conf & HMC5843_MEAS_CONF_MASK) |
(data->rate << HMC5843_RATE_OFFSET));
if (ret >= 0)
data->meas_conf = meas_conf;
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A,
HMC5843_MEAS_CONF_MASK, meas_conf);
mutex_unlock(&data->lock);
return ret;
......@@ -228,7 +209,15 @@ static ssize_t hmc5843_show_measurement_configuration(struct device *dev,
char *buf)
{
struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
return sprintf(buf, "%d\n", data->meas_conf);
int val;
int ret;
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val);
if (ret)
return ret;
val &= HMC5843_MEAS_CONF_MASK;
return sprintf(buf, "%d\n", val);
}
static ssize_t hmc5843_set_measurement_configuration(struct device *dev,
......@@ -264,7 +253,7 @@ static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
size_t len = 0;
int i;
for (i = 0; i < HMC5843_RATES; i++)
for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
len += scnprintf(buf + len, PAGE_SIZE - len,
"%d.%d ", data->variant->regval_to_samp_freq[i][0],
data->variant->regval_to_samp_freq[i][1]);
......@@ -282,10 +271,8 @@ static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate)
int ret;
mutex_lock(&data->lock);
ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A,
data->meas_conf | (rate << HMC5843_RATE_OFFSET));
if (ret >= 0)
data->rate = rate;
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A,
HMC5843_RATE_MASK, rate << HMC5843_RATE_OFFSET);
mutex_unlock(&data->lock);
return ret;
......@@ -296,7 +283,7 @@ static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
{
int i;
for (i = 0; i < HMC5843_RATES; i++)
for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
if (val == data->variant->regval_to_samp_freq[i][0] &&
val2 == data->variant->regval_to_samp_freq[i][1])
return i;
......@@ -309,10 +296,9 @@ static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range)
int ret;
mutex_lock(&data->lock);
ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_B,
range << HMC5843_RANGE_GAIN_OFFSET);
if (ret >= 0)
data->range = range;
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B,
HMC5843_RANGE_GAIN_MASK,
range << HMC5843_RANGE_GAIN_OFFSET);
mutex_unlock(&data->lock);
return ret;
......@@ -326,7 +312,7 @@ static ssize_t hmc5843_show_scale_avail(struct device *dev,
size_t len = 0;
int i;
for (i = 0; i < HMC5843_RANGE_GAINS; i++)
for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
len += scnprintf(buf + len, PAGE_SIZE - len,
"0.%09d ", data->variant->regval_to_nanoscale[i]);
......@@ -346,7 +332,7 @@ static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2)
if (val != 0)
return -EINVAL;
for (i = 0; i < HMC5843_RANGE_GAINS; i++)
for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
if (val2 == data->variant->regval_to_nanoscale[i])
return i;
......@@ -358,17 +344,27 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct hmc5843_data *data = iio_priv(indio_dev);
int rval;
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return hmc5843_read_measurement(data, chan->scan_index, val);
case IIO_CHAN_INFO_SCALE:
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval);
if (ret < 0)
return ret;
rval >>= HMC5843_RANGE_GAIN_OFFSET;
*val = 0;
*val2 = data->variant->regval_to_nanoscale[data->range];
*val2 = data->variant->regval_to_nanoscale[rval];
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = data->variant->regval_to_samp_freq[data->rate][0];
*val2 = data->variant->regval_to_samp_freq[data->rate][1];
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval);
if (ret < 0)
return ret;
rval >>= HMC5843_RATE_OFFSET;
*val = data->variant->regval_to_samp_freq[rval][0];
*val2 = data->variant->regval_to_samp_freq[rval][1];
return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
......@@ -426,9 +422,9 @@ static irqreturn_t hmc5843_trigger_handler(int irq, void *p)
goto done;
}
ret = i2c_smbus_read_i2c_block_data(data->client,
HMC5843_DATA_OUT_MSB_REGS, 3 * sizeof(__be16),
(u8 *) data->buffer);
ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS,
data->buffer, 3 * sizeof(__be16));
mutex_unlock(&data->lock);
if (ret < 0)
goto done;
......@@ -466,7 +462,7 @@ static const struct iio_chan_spec hmc5843_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
/* Beware: Y and Z are exchanged on HMC5883 */
/* Beware: Y and Z are exchanged on HMC5883 and 5983 */
static const struct iio_chan_spec hmc5883_channels[] = {
HMC5843_CHANNEL(X, 0),
HMC5843_CHANNEL(Z, 1),
......@@ -489,18 +485,39 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
[HMC5843_ID] = {
.channels = hmc5843_channels,
.regval_to_samp_freq = hmc5843_regval_to_samp_freq,
.n_regval_to_samp_freq =
ARRAY_SIZE(hmc5843_regval_to_samp_freq),
.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
.n_regval_to_nanoscale =
ARRAY_SIZE(hmc5843_regval_to_nanoscale),
},
[HMC5883_ID] = {
.channels = hmc5883_channels,
.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
.n_regval_to_samp_freq =
ARRAY_SIZE(hmc5883_regval_to_samp_freq),
.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
.n_regval_to_nanoscale =
ARRAY_SIZE(hmc5883_regval_to_nanoscale),
},
[HMC5883L_ID] = {
.channels = hmc5883_channels,
.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
.n_regval_to_samp_freq =
ARRAY_SIZE(hmc5883_regval_to_samp_freq),
.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
.n_regval_to_nanoscale =
ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
},
[HMC5983_ID] = {
.channels = hmc5883_channels,
.regval_to_samp_freq = hmc5983_regval_to_samp_freq,
.n_regval_to_samp_freq =
ARRAY_SIZE(hmc5983_regval_to_samp_freq),
.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
.n_regval_to_nanoscale =
ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
}
};
static int hmc5843_init(struct hmc5843_data *data)
......@@ -508,12 +525,12 @@ static int hmc5843_init(struct hmc5843_data *data)
int ret;
u8 id[3];
ret = i2c_smbus_read_i2c_block_data(data->client, HMC5843_ID_REG,
sizeof(id), id);
ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG,
id, ARRAY_SIZE(id));
if (ret < 0)
return ret;
if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
dev_err(&data->client->dev, "no HMC5843/5883/5883L sensor\n");
dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n");
return -ENODEV;
}
......@@ -539,27 +556,43 @@ static const struct iio_info hmc5843_info = {
static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
static int hmc5843_probe(struct i2c_client *client,
const struct i2c_device_id *id)
int hmc5843_common_suspend(struct device *dev)
{
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
HMC5843_MODE_CONVERSION_CONTINUOUS);
}
EXPORT_SYMBOL(hmc5843_common_suspend);
int hmc5843_common_resume(struct device *dev)
{
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
HMC5843_MODE_SLEEP);
}
EXPORT_SYMBOL(hmc5843_common_resume);
int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
enum hmc5843_ids id)
{
struct hmc5843_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (indio_dev == NULL)
return -ENOMEM;
dev_set_drvdata(dev, indio_dev);
/* default settings at probe */
data = iio_priv(indio_dev);
data->client = client;
data->variant = &hmc5843_chip_info_tbl[id->driver_data];
data->dev = dev;
data->regmap = regmap;
data->variant = &hmc5843_chip_info_tbl[id];
mutex_init(&data->lock);
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = dev;
indio_dev->info = &hmc5843_info;
indio_dev->name = id->name;
indio_dev->dev.parent = &client->dev;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = data->variant->channels;
indio_dev->num_channels = 4;
......@@ -584,10 +617,11 @@ static int hmc5843_probe(struct i2c_client *client,
iio_triggered_buffer_cleanup(indio_dev);
return ret;
}
EXPORT_SYMBOL(hmc5843_common_probe);
static int hmc5843_remove(struct i2c_client *client)
int hmc5843_common_remove(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct iio_dev *indio_dev = dev_get_drvdata(dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
......@@ -597,58 +631,8 @@ static int hmc5843_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int hmc5843_suspend(struct device *dev)
{
struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
return hmc5843_set_mode(data, HMC5843_MODE_SLEEP);
}
static int hmc5843_resume(struct device *dev)
{
struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
}
static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume);
#define HMC5843_PM_OPS (&hmc5843_pm_ops)
#else
#define HMC5843_PM_OPS NULL
#endif
static const struct i2c_device_id hmc5843_id[] = {
{ "hmc5843", HMC5843_ID },
{ "hmc5883", HMC5883_ID },
{ "hmc5883l", HMC5883L_ID },
{ }
};
MODULE_DEVICE_TABLE(i2c, hmc5843_id);
static const struct of_device_id hmc5843_of_match[] = {
{ .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
{ .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
{ .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
{}
};
MODULE_DEVICE_TABLE(of, hmc5843_of_match);
static struct i2c_driver hmc5843_driver = {
.driver = {
.name = "hmc5843",
.pm = HMC5843_PM_OPS,
.of_match_table = hmc5843_of_match,
},
.id_table = hmc5843_id,
.probe = hmc5843_probe,
.remove = hmc5843_remove,
};
module_i2c_driver(hmc5843_driver);
EXPORT_SYMBOL(hmc5843_common_remove);
MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>");
MODULE_DESCRIPTION("HMC5843/5883/5883L driver");
MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver");
MODULE_LICENSE("GPL");
/*
* i2c driver for hmc5843/5843/5883/5883l/5983
*
* Split from hmc5843.c
* Copyright (C) Josef Gajdusek <atx@atx.name>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* */
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/triggered_buffer.h>
#include "hmc5843.h"
static const struct regmap_range hmc5843_readable_ranges[] = {
regmap_reg_range(0, HMC5843_ID_END),
};
static struct regmap_access_table hmc5843_readable_table = {
.yes_ranges = hmc5843_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
};
static const struct regmap_range hmc5843_writable_ranges[] = {
regmap_reg_range(0, HMC5843_MODE_REG),
};
static struct regmap_access_table hmc5843_writable_table = {
.yes_ranges = hmc5843_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
};
static const struct regmap_range hmc5843_volatile_ranges[] = {
regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
};
static struct regmap_access_table hmc5843_volatile_table = {
.yes_ranges = hmc5843_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
};
static struct regmap_config hmc5843_i2c_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.rd_table = &hmc5843_readable_table,
.wr_table = &hmc5843_writable_table,
.volatile_table = &hmc5843_volatile_table,
.cache_type = REGCACHE_RBTREE,
};
static int hmc5843_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
return hmc5843_common_probe(&client->dev,
devm_regmap_init_i2c(client, &hmc5843_i2c_regmap_config),
id->driver_data);
}
static int hmc5843_i2c_remove(struct i2c_client *client)
{
return hmc5843_common_remove(&client->dev);
}
static const struct i2c_device_id hmc5843_id[] = {
{ "hmc5843", HMC5843_ID },
{ "hmc5883", HMC5883_ID },
{ "hmc5883l", HMC5883L_ID },
{ "hmc5983", HMC5983_ID },
{ }
};
MODULE_DEVICE_TABLE(i2c, hmc5843_id);
static const struct of_device_id hmc5843_of_match[] = {
{ .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
{ .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
{ .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
{ .compatible = "honeywell,hmc5983", .data = (void *)HMC5983_ID },
{}
};
MODULE_DEVICE_TABLE(of, hmc5843_of_match);
static struct i2c_driver hmc5843_driver = {
.driver = {
.name = "hmc5843",
.pm = HMC5843_PM_OPS,
.of_match_table = hmc5843_of_match,
},
.id_table = hmc5843_id,
.probe = hmc5843_i2c_probe,
.remove = hmc5843_i2c_remove,
};
module_i2c_driver(hmc5843_driver);
MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 i2c driver");
MODULE_LICENSE("GPL");
/*
* SPI driver for hmc5983
*
* Copyright (C) Josef Gajdusek <atx@atx.name>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* */
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include "hmc5843.h"
static const struct regmap_range hmc5843_readable_ranges[] = {
regmap_reg_range(0, HMC5843_ID_END),
};
static struct regmap_access_table hmc5843_readable_table = {
.yes_ranges = hmc5843_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
};
static const struct regmap_range hmc5843_writable_ranges[] = {
regmap_reg_range(0, HMC5843_MODE_REG),
};
static struct regmap_access_table hmc5843_writable_table = {
.yes_ranges = hmc5843_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
};
static const struct regmap_range hmc5843_volatile_ranges[] = {
regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
};
static struct regmap_access_table hmc5843_volatile_table = {
.yes_ranges = hmc5843_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
};
static struct regmap_config hmc5843_spi_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.rd_table = &hmc5843_readable_table,
.wr_table = &hmc5843_writable_table,
.volatile_table = &hmc5843_volatile_table,
/* Autoincrement address pointer */
.read_flag_mask = 0xc0,
.cache_type = REGCACHE_RBTREE,
};
static int hmc5843_spi_probe(struct spi_device *spi)
{
int ret;
spi->mode = SPI_MODE_3;
spi->max_speed_hz = 8000000;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret)
return ret;
return hmc5843_common_probe(&spi->dev,
devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config),
HMC5983_ID);
}
static int hmc5843_spi_remove(struct spi_device *spi)
{
return hmc5843_common_remove(&spi->dev);
}
static const struct spi_device_id hmc5843_id[] = {
{ "hmc5983", HMC5983_ID },
{ }
};
static struct spi_driver hmc5843_driver = {
.driver = {
.name = "hmc5843",
.pm = HMC5843_PM_OPS,
.owner = THIS_MODULE,
},
.id_table = hmc5843_id,
.probe = hmc5843_spi_probe,
.remove = hmc5843_spi_remove,
};
module_spi_driver(hmc5843_driver);
MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
MODULE_DESCRIPTION("HMC5983 SPI driver");
MODULE_LICENSE("GPL");
......@@ -56,6 +56,10 @@ enum iio_modifier {
IIO_MOD_QUATERNION,
IIO_MOD_TEMP_AMBIENT,
IIO_MOD_TEMP_OBJECT,
IIO_MOD_NORTH_MAGN,
IIO_MOD_NORTH_TRUE,
IIO_MOD_NORTH_MAGN_TILT_COMP,
IIO_MOD_NORTH_TRUE_TILT_COMP
};
enum iio_event_type {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment