Merge tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t

MAINTAINERS

@@ -17172,7 +17172,6 @@ F:	drivers/vme/
 F:	include/linux/vme*
 
 VMWARE BALLOON DRIVER
-M:	Julien Freche <jfreche@vmware.com>
 M:	Nadav Amit <namit@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	linux-kernel@vger.kernel.org

drivers/android/binder.c

@@ -2988,7 +2988,7 @@ static void binder_transaction(struct binder_proc *proc,
 			else
 				return_error = BR_DEAD_REPLY;
 			mutex_unlock(&context->context_mgr_node_lock);
-			if (target_node && target_proc == proc) {
+			if (target_node && target_proc->pid == proc->pid) {
 				binder_user_error("%d:%d got transaction to context manager from process owning it\n",
 						  proc->pid, thread->pid);
 				return_error = BR_FAILED_REPLY;
@@ -3239,7 +3239,8 @@ static void binder_transaction(struct binder_proc *proc,
 	buffer_offset = off_start_offset;
 	off_end_offset = off_start_offset + tr->offsets_size;
 	sg_buf_offset = ALIGN(off_end_offset, sizeof(void *));
-	sg_buf_end_offset = sg_buf_offset + extra_buffers_size;
+	sg_buf_end_offset = sg_buf_offset + extra_buffers_size -
+		ALIGN(secctx_sz, sizeof(u64));
 	off_min = 0;
 	for (buffer_offset = off_start_offset; buffer_offset < off_end_offset;
 	     buffer_offset += sizeof(binder_size_t)) {

drivers/base/firmware_loader/firmware.h

@@ -141,8 +141,8 @@ int fw_grow_paged_buf(struct fw_priv *fw_priv, int pages_needed);
 int fw_map_paged_buf(struct fw_priv *fw_priv);
 #else
 static inline void fw_free_paged_buf(struct fw_priv *fw_priv) {}
-int fw_grow_paged_buf(struct fw_priv *fw_priv, int pages_needed) { return -ENXIO; }
-int fw_map_paged_buf(struct fw_priv *fw_priv) { return -ENXIO; }
+static inline int fw_grow_paged_buf(struct fw_priv *fw_priv, int pages_needed) { return -ENXIO; }
+static inline int fw_map_paged_buf(struct fw_priv *fw_priv) { return -ENXIO; }
 #endif
 
 #endif /* __FIRMWARE_LOADER_H */

drivers/char/hpet.c

@@ -567,8 +567,7 @@ static inline unsigned long hpet_time_div(struct hpets *hpets,
 	unsigned long long m;
 
 	m = hpets->hp_tick_freq + (dis >> 1);
-	do_div(m, dis);
-	return (unsigned long)m;
+	return div64_ul(m, dis);
 }
 
 static int

drivers/fpga/Kconfig

@@ -40,6 +40,7 @@ config ALTERA_PR_IP_CORE_PLAT
 config FPGA_MGR_ALTERA_PS_SPI
 	tristate "Altera FPGA Passive Serial over SPI"
 	depends on SPI
+	select BITREVERSE
 	help
 	  FPGA manager driver support for Altera Arria/Cyclone/Stratix
 	  using the passive serial interface over SPI.

drivers/misc/eeprom/Kconfig

@@ -5,6 +5,7 @@ config EEPROM_AT24
 	tristate "I2C EEPROMs / RAMs / ROMs from most vendors"
 	depends on I2C && SYSFS
 	select NVMEM
+	select NVMEM_SYSFS
 	select REGMAP_I2C
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs
@@ -34,6 +35,7 @@ config EEPROM_AT25
 	tristate "SPI EEPROMs from most vendors"
 	depends on SPI && SYSFS
 	select NVMEM
+	select NVMEM_SYSFS
 	help
 	  Enable this driver to get read/write support to most SPI EEPROMs,
 	  after you configure the board init code to know about each eeprom
@@ -80,6 +82,7 @@ config EEPROM_93XX46
 	depends on SPI && SYSFS
 	select REGMAP
 	select NVMEM
+	select NVMEM_SYSFS
 	help
 	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
 	  supports both read and write commands and also the command to

drivers/misc/habanalabs/goya/goya.c

@@ -695,8 +695,8 @@ static int goya_sw_init(struct hl_device *hdev)
 		goto free_dma_pool;
 	}
 
-	dev_dbg(hdev->dev, "cpu accessible memory at bus address 0x%llx\n",
-		hdev->cpu_accessible_dma_address);
+	dev_dbg(hdev->dev, "cpu accessible memory at bus address %pad\n",
+		&hdev->cpu_accessible_dma_address);
 
 	hdev->cpu_accessible_dma_pool = gen_pool_create(ilog2(32), -1);
 	if (!hdev->cpu_accessible_dma_pool) {
@@ -4449,7 +4449,6 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
 	case GOYA_ASYNC_EVENT_ID_AXI_ECC:
 	case GOYA_ASYNC_EVENT_ID_L2_RAM_ECC:
 	case GOYA_ASYNC_EVENT_ID_PSOC_GPIO_05_SW_RESET:
-	case GOYA_ASYNC_EVENT_ID_PSOC_GPIO_10_VRHOT_ICRIT:
 		goya_print_irq_info(hdev, event_type, false);
 		hl_device_reset(hdev, true, false);
 		break;
@@ -4485,6 +4484,7 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
 		goya_unmask_irq(hdev, event_type);
 		break;
 
+	case GOYA_ASYNC_EVENT_ID_PSOC_GPIO_10_VRHOT_ICRIT:
 	case GOYA_ASYNC_EVENT_ID_TPC0_BMON_SPMU:
 	case GOYA_ASYNC_EVENT_ID_TPC1_BMON_SPMU:
 	case GOYA_ASYNC_EVENT_ID_TPC2_BMON_SPMU:

drivers/misc/mei/hw-me-regs.h

@@ -81,6 +81,9 @@
 
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
+#define MEI_DEV_ID_MCC        0x4B70  /* Mule Creek Canyon (EHL) */
+#define MEI_DEV_ID_MCC_4      0x4B75  /* Mule Creek Canyon 4 (EHL) */
+
 /*
  * MEI HW Section
  */

drivers/misc/mei/pci-me.c

@@ -98,6 +98,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC_4, MEI_ME_PCH8_CFG)},
+
 	/* required last entry */
 	{0, }
 };

lib/test_firmware.c

@@ -886,8 +886,11 @@ static int __init test_firmware_init(void)
 		return -ENOMEM;
 
 	rc = __test_firmware_config_init();
-	if (rc)
+	if (rc) {
+		kfree(test_fw_config);
+		pr_err("could not init firmware test config: %d\n", rc);
 		return rc;
+	}
 
 	rc = misc_register(&test_fw_misc_device);
 	if (rc) {