e1000: reorder e1000_param.c

This file needs some cleanups and reordering - logically order it
so that relevant defines and code are together with properly quoted
defaults.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>

drivers/net/e1000/e1000_param.c

@@ -44,16 +44,6 @@
  */
 
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-/* Module Parameters are always initialized to -1, so that the driver
- * can tell the difference between no user specified value or the
- * user asking for the default value.
- * The true default values are loaded in when e1000_check_options is called.
- *
- * This is a GCC extension to ANSI C.
- * See the item "Labeled Elements in Initializers" in the section
- * "Extensions to the C Language Family" of the GCC documentation.
- */
-
 #define E1000_PARAM(X, desc) \
 	static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
 	static int num_##X = 0; \
@@ -67,7 +57,6 @@
  *
  * Default Value: 256
  */
-
 E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
 
 /* Receive Descriptor Count
@@ -77,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
  *
  * Default Value: 256
  */
-
 E1000_PARAM(RxDescriptors, "Number of receive descriptors");
 
 /* User Specified Speed Override
@@ -90,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors");
  *
  * Default Value: 0
  */
-
 E1000_PARAM(Speed, "Speed setting");
 
 /* User Specified Duplex Override
@@ -102,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting");
  *
  * Default Value: 0
  */
-
 E1000_PARAM(Duplex, "Duplex setting");
 
 /* Auto-negotiation Advertisement Override
@@ -119,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting");
  *
  * Default Value: 0x2F (copper); 0x20 (fiber)
  */
-
 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT  0x2F
+#define AUTONEG_ADV_MASK     0x2F
 
 /* User Specified Flow Control Override
  *
@@ -132,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
  *
  * Default Value: Read flow control settings from the EEPROM
  */
-
 E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
 
 /* XsumRX - Receive Checksum Offload Enable/Disable
  *
@@ -144,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting");
  *
  * Default Value: 1
  */
-
 E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
 
 /* Transmit Interrupt Delay in units of 1.024 microseconds
+ *  Tx interrupt delay needs to typically be set to something non zero
  *
  * Valid Range: 0-65535
- *
- * Default Value: 64
  */
-
 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV                  64
+#define MAX_TXDELAY               0xFFFF
+#define MIN_TXDELAY                    0
 
 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
- *
- * Default Value: 0
  */
-
 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV                  64
+#define MAX_TXABSDELAY            0xFFFF
+#define MIN_TXABSDELAY                 0
 
 /* Receive Interrupt Delay in units of 1.024 microseconds
+ *   hardware will likely hang if you set this to anything but zero.
  *
  * Valid Range: 0-65535
- *
- * Default Value: 0
  */
-
 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR                   0
+#define MAX_RXDELAY               0xFFFF
+#define MIN_RXDELAY                    0
 
 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
- *
- * Default Value: 128
  */
-
 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV                 128
+#define MAX_RXABSDELAY            0xFFFF
+#define MIN_RXABSDELAY                 0
 
 /* Interrupt Throttle Rate (interrupts/sec)
  *
  * Valid Range: 100-100000 (0=off, 1=dynamic)
- *
- * Default Value: 8000
  */
-
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR                 8000
+#define MAX_ITR                   100000
+#define MIN_ITR                      100
 
 /* Enable Smart Power Down of the PHY
  *
@@ -198,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
  *
  * Default Value: 0 (disabled)
  */
-
 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
 
 /* Enable Kumeran Lock Loss workaround
@@ -207,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
  *
  * Default Value: 1 (enabled)
  */
-
 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
 
-#define AUTONEG_ADV_DEFAULT  0x2F
-#define AUTONEG_ADV_MASK     0x2F
-#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
-
-#define DEFAULT_RDTR                   0
-#define MAX_RXDELAY               0xFFFF
-#define MIN_RXDELAY                    0
-
-#define DEFAULT_RADV                 128
-#define MAX_RXABSDELAY            0xFFFF
-#define MIN_RXABSDELAY                 0
-
-#define DEFAULT_TIDV                  64
-#define MAX_TXDELAY               0xFFFF
-#define MIN_TXDELAY                    0
-
-#define DEFAULT_TADV                  64
-#define MAX_TXABSDELAY            0xFFFF
-#define MIN_TXABSDELAY                 0
-
-#define DEFAULT_ITR                 8000
-#define MAX_ITR                   100000
-#define MIN_ITR                      100
-
 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
 	char *name;