Merge branch 'pci/taku-prt-cleanup' into next

* pci/taku-prt-cleanup:
  PCI/ACPI: Request _OSC control before scanning PCI root bus
  PCI: Don't pass pci_dev to pci_ext_cfg_avail()
  PCI/ACPI: Add _PRT interrupt routing info before enumerating devices
  ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_bus

arch/x86/pci/common.c

@@ -626,7 +626,7 @@ void pcibios_disable_device (struct pci_dev *dev)
 		pcibios_disable_irq(dev);
 }
 
-int pci_ext_cfg_avail(struct pci_dev *dev)
+int pci_ext_cfg_avail(void)
 {
 	if (raw_pci_ext_ops)
 		return 1;

drivers/acpi/pci_bind.c

@@ -49,7 +49,7 @@ static int acpi_pci_unbind(struct acpi_device *device)
 	if (!dev->subordinate)
 		goto out;
 
-	acpi_pci_irq_del_prt(dev->subordinate);
+	acpi_pci_irq_del_prt(pci_domain_nr(dev->bus), dev->subordinate->number);
 
 	device->ops.bind = NULL;
 	device->ops.unbind = NULL;
@@ -63,7 +63,7 @@ static int acpi_pci_bind(struct acpi_device *device)
 {
 	acpi_status status;
 	acpi_handle handle;
-	struct pci_bus *bus;
+	unsigned char bus;
 	struct pci_dev *dev;
 
 	dev = acpi_get_pci_dev(device->handle);
@@ -100,11 +100,11 @@ static int acpi_pci_bind(struct acpi_device *device)
 		goto out;
 
 	if (dev->subordinate)
-		bus = dev->subordinate;
+		bus = dev->subordinate->number;
 	else
-		bus = dev->bus;
+		bus = dev->bus->number;
 
-	acpi_pci_irq_add_prt(device->handle, bus);
+	acpi_pci_irq_add_prt(device->handle, pci_domain_nr(dev->bus), bus);
 
 out:
 	pci_dev_put(dev);

drivers/acpi/pci_irq.c

@@ -184,7 +184,7 @@ static void do_prt_fixups(struct acpi_prt_entry *entry,
 	}
 }
 
-static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
+static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
 				  struct acpi_pci_routing_table *prt)
 {
 	struct acpi_prt_entry *entry;
@@ -198,8 +198,8 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
 	 * 1=INTA, 2=INTB.  We use the PCI encoding throughout, so convert
 	 * it here.
 	 */
-	entry->id.segment = pci_domain_nr(bus);
-	entry->id.bus = bus->number;
+	entry->id.segment = segment;
+	entry->id.bus = bus;
 	entry->id.device = (prt->address >> 16) & 0xFFFF;
 	entry->pin = prt->pin + 1;
 
@@ -244,7 +244,7 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
 	return 0;
 }
 
-int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
 {
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -273,7 +273,7 @@ int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
 
 	entry = buffer.pointer;
 	while (entry && (entry->length > 0)) {
-		acpi_pci_irq_add_entry(handle, bus, entry);
+		acpi_pci_irq_add_entry(handle, segment, bus, entry);
 		entry = (struct acpi_pci_routing_table *)
 		    ((unsigned long)entry + entry->length);
 	}
@@ -282,17 +282,16 @@ int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
 	return 0;
 }
 
-void acpi_pci_irq_del_prt(struct pci_bus *bus)
+void acpi_pci_irq_del_prt(int segment, int bus)
 {
 	struct acpi_prt_entry *entry, *tmp;
 
 	printk(KERN_DEBUG
 	       "ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n",
-	       pci_domain_nr(bus), bus->number);
+	       segment, bus);
 	spin_lock(&acpi_prt_lock);
 	list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) {
-		if (pci_domain_nr(bus) == entry->id.segment
-			&& bus->number == entry->id.bus) {
+		if (segment == entry->id.segment && bus == entry->id.bus) {
 			list_del(&entry->list);
 			kfree(entry);
 		}

drivers/acpi/pci_root.c

@@ -454,6 +454,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	acpi_handle handle;
 	struct acpi_device *child;
 	u32 flags, base_flags;
+	bool is_osc_granted = false;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
@@ -501,52 +502,10 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
 	device->driver_data = root;
 
-	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
-
-	/*
-	 * All supported architectures that use ACPI have support for
-	 * PCI domains, so we indicate this in _OSC support capabilities.
-	 */
-	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
-	acpi_pci_osc_support(root, flags);
-
-	/*
-	 * TBD: Need PCI interface for enumeration/configuration of roots.
-	 */
-
-	mutex_lock(&acpi_pci_root_lock);
-	list_add_tail(&root->node, &acpi_pci_roots);
-	mutex_unlock(&acpi_pci_root_lock);
-
 	printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       root->segment, &root->secondary);
 
-	/*
-	 * Scan the Root Bridge
-	 * --------------------
-	 * Must do this prior to any attempt to bind the root device, as the
-	 * PCI namespace does not get created until this call is made (and 
-	 * thus the root bridge's pci_dev does not exist).
-	 */
-	root->bus = pci_acpi_scan_root(root);
-	if (!root->bus) {
-		printk(KERN_ERR PREFIX
-			    "Bus %04x:%02x not present in PCI namespace\n",
-			    root->segment, (unsigned int)root->secondary.start);
-		result = -ENODEV;
-		goto out_del_root;
-	}
-
-	/*
-	 * Attach ACPI-PCI Context
-	 * -----------------------
-	 * Thus binding the ACPI and PCI devices.
-	 */
-	result = acpi_pci_bind_root(device);
-	if (result)
-		goto out_del_root;
-
 	/*
 	 * PCI Routing Table
 	 * -----------------
@@ -554,32 +513,36 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	 */
 	status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
 	if (ACPI_SUCCESS(status))
-		result = acpi_pci_irq_add_prt(device->handle, root->bus);
+		result = acpi_pci_irq_add_prt(device->handle, root->segment,
+					      root->secondary.start);
+
+	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
 
 	/*
-	 * Scan and bind all _ADR-Based Devices
+	 * All supported architectures that use ACPI have support for
+	 * PCI domains, so we indicate this in _OSC support capabilities.
 	 */
-	list_for_each_entry(child, &device->children, node)
-		acpi_pci_bridge_scan(child);
+	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
+	acpi_pci_osc_support(root, flags);
 
 	/* Indicate support for various _OSC capabilities. */
-	if (pci_ext_cfg_avail(root->bus->self))
+	if (pci_ext_cfg_avail())
 		flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
-	if (pcie_aspm_support_enabled())
+	if (pcie_aspm_support_enabled()) {
 		flags |= OSC_ACTIVE_STATE_PWR_SUPPORT |
 		OSC_CLOCK_PWR_CAPABILITY_SUPPORT;
+	}
 	if (pci_msi_enabled())
 		flags |= OSC_MSI_SUPPORT;
 	if (flags != base_flags) {
 		status = acpi_pci_osc_support(root, flags);
 		if (ACPI_FAILURE(status)) {
-			dev_info(root->bus->bridge, "ACPI _OSC support "
+			dev_info(&device->dev, "ACPI _OSC support "
 				"notification failed, disabling PCIe ASPM\n");
 			pcie_no_aspm();
 			flags = base_flags;
 		}
 	}
-
 	if (!pcie_ports_disabled
 	    && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
 		flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL
@@ -588,42 +551,83 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 
 		if (pci_aer_available()) {
 			if (aer_acpi_firmware_first())
-				dev_dbg(root->bus->bridge,
+				dev_dbg(&device->dev,
 					"PCIe errors handled by BIOS.\n");
 			else
 				flags |= OSC_PCI_EXPRESS_AER_CONTROL;
 		}
 
-		dev_info(root->bus->bridge,
+		dev_info(&device->dev,
 			"Requesting ACPI _OSC control (0x%02x)\n", flags);
 
 		status = acpi_pci_osc_control_set(device->handle, &flags,
 				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
 		if (ACPI_SUCCESS(status)) {
-			dev_info(root->bus->bridge,
+			is_osc_granted = true;
+			dev_info(&device->dev,
 				"ACPI _OSC control (0x%02x) granted\n", flags);
-			if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
-				/*
-				 * We have ASPM control, but the FADT indicates
-				 * that it's unsupported. Clear it.
-				 */
-				pcie_clear_aspm(root->bus);
-			}
 		} else {
-			dev_info(root->bus->bridge,
+			is_osc_granted = false;
+			dev_info(&device->dev,
 				"ACPI _OSC request failed (%s), "
 				"returned control mask: 0x%02x\n",
 				acpi_format_exception(status), flags);
-			pr_info("ACPI _OSC control for PCIe not granted, "
-				"disabling ASPM\n");
-			pcie_no_aspm();
 		}
 	} else {
-		dev_info(root->bus->bridge,
+		dev_info(&device->dev,
 			"Unable to request _OSC control "
 			"(_OSC support mask: 0x%02x)\n", flags);
 	}
 
+	/*
+	 * TBD: Need PCI interface for enumeration/configuration of roots.
+	 */
+
+	mutex_lock(&acpi_pci_root_lock);
+	list_add_tail(&root->node, &acpi_pci_roots);
+	mutex_unlock(&acpi_pci_root_lock);
+
+	/*
+	 * Scan the Root Bridge
+	 * --------------------
+	 * Must do this prior to any attempt to bind the root device, as the
+	 * PCI namespace does not get created until this call is made (and 
+	 * thus the root bridge's pci_dev does not exist).
+	 */
+	root->bus = pci_acpi_scan_root(root);
+	if (!root->bus) {
+		printk(KERN_ERR PREFIX
+			    "Bus %04x:%02x not present in PCI namespace\n",
+			    root->segment, (unsigned int)root->secondary.start);
+		result = -ENODEV;
+		goto out_del_root;
+	}
+
+	/*
+	 * Attach ACPI-PCI Context
+	 * -----------------------
+	 * Thus binding the ACPI and PCI devices.
+	 */
+	result = acpi_pci_bind_root(device);
+	if (result)
+		goto out_del_root;
+
+	/*
+	 * Scan and bind all _ADR-Based Devices
+	 */
+	list_for_each_entry(child, &device->children, node)
+		acpi_pci_bridge_scan(child);
+
+	/* ASPM setting */
+	if (is_osc_granted) {
+		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
+			pcie_clear_aspm(root->bus);
+	} else {
+		pr_info("ACPI _OSC control for PCIe not granted, "
+			"disabling ASPM\n");
+		pcie_no_aspm();
+	}
+
 	pci_acpi_add_bus_pm_notifier(device, root->bus);
 	if (device->wakeup.flags.run_wake)
 		device_set_run_wake(root->bus->bridge, true);
@@ -634,6 +638,8 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	mutex_lock(&acpi_pci_root_lock);
 	list_del(&root->node);
 	mutex_unlock(&acpi_pci_root_lock);
+
+	acpi_pci_irq_del_prt(root->segment, root->secondary.start);
 end:
 	kfree(root);
 	return result;
@@ -682,7 +688,7 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type)
 
 	status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
 	if (ACPI_SUCCESS(status))
-		acpi_pci_irq_del_prt(root->bus);
+		acpi_pci_irq_del_prt(root->segment, root->secondary.start);
 
 	pci_remove_root_bus(root->bus);
 

drivers/pci/pci.c

@@ -3843,14 +3843,13 @@ static void __devinit pci_no_domains(void)
 }
 
 /**
- * pci_ext_cfg_enabled - can we access extended PCI config space?
- * @dev: The PCI device of the root bridge.
+ * pci_ext_cfg_avail - can we access extended PCI config space?
  *
  * Returns 1 if we can access PCI extended config space (offsets
  * greater than 0xff). This is the default implementation. Architecture
  * implementations can override this.
  */
-int __weak pci_ext_cfg_avail(struct pci_dev *dev)
+int __weak pci_ext_cfg_avail(void)
 {
 	return 1;
 }

include/acpi/acpi_drivers.h

@@ -92,8 +92,8 @@ int acpi_pci_link_free_irq(acpi_handle handle);
 
 /* ACPI PCI Interrupt Routing (pci_irq.c) */
 
-int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus);
-void acpi_pci_irq_del_prt(struct pci_bus *bus);
+int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus);
+void acpi_pci_irq_del_prt(int segment, int bus);
 
 /* ACPI PCI Device Binding (pci_bind.c) */
 

include/linux/pci.h

@@ -1604,7 +1604,7 @@ static inline void pci_mmcfg_early_init(void) { }
 static inline void pci_mmcfg_late_init(void) { }
 #endif
 
-int pci_ext_cfg_avail(struct pci_dev *dev);
+int pci_ext_cfg_avail(void);
 
 void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);