Commit 05a3185c authored by Uwe Kleine-König's avatar Uwe Kleine-König

ARM: mx1: don't use deprecated symbol names

Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parent c10ea4d6
......@@ -4,7 +4,6 @@
# Object file lists.
EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
......
......@@ -596,7 +596,8 @@ int __init mx1_clocks_init(unsigned long fref)
clk_enable(&hclk);
clk_enable(&fclk);
mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
MX1_TIM1_INT);
return 0;
}
......@@ -9,8 +9,8 @@
#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define SCM_BASE IO_ADDRESS(SCM_BASE_ADDR)
#define CCM_BASE MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR)
#define SCM_BASE MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR)
/* CCM register addresses */
#define CCM_CSCR (CCM_BASE + 0x0)
......
......@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
......@@ -34,20 +35,20 @@ static struct resource imx_csi_resources[] = {
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
.start = CSI_INT,
.end = CSI_INT,
.start = MX1_CSI_INT,
.end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx_csi_dmamask = 0xffffffffUL;
static u64 imx_csi_dmamask = DMA_BIT_MASK(32);
struct platform_device imx_csi_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx_csi_dmamask,
.coherent_dma_mask = 0xffffffff,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx_csi_resources,
.num_resources = ARRAY_SIZE(imx_csi_resources),
......@@ -59,8 +60,8 @@ static struct resource imx_i2c_resources[] = {
.end = 0x00217010,
.flags = IORESOURCE_MEM,
}, {
.start = I2C_INT,
.end = I2C_INT,
.start = MX1_I2C_INT,
.end = MX1_I2C_INT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -74,20 +75,20 @@ struct platform_device imx_i2c_device = {
static struct resource imx_uart1_resources[] = {
{
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0xD0,
.start = MX1_UART1_BASE_ADDR,
.end = MX1_UART1_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
}, {
.start = UART1_MINT_RX,
.end = UART1_MINT_RX,
.start = MX1_UART1_MINT_RX,
.end = MX1_UART1_MINT_RX,
.flags = IORESOURCE_IRQ,
}, {
.start = UART1_MINT_TX,
.end = UART1_MINT_TX,
.start = MX1_UART1_MINT_TX,
.end = MX1_UART1_MINT_TX,
.flags = IORESOURCE_IRQ,
}, {
.start = UART1_MINT_RTS,
.end = UART1_MINT_RTS,
.start = MX1_UART1_MINT_RTS,
.end = MX1_UART1_MINT_RTS,
.flags = IORESOURCE_IRQ,
},
};
......@@ -101,20 +102,20 @@ struct platform_device imx_uart1_device = {
static struct resource imx_uart2_resources[] = {
{
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0xD0,
.start = MX1_UART2_BASE_ADDR,
.end = MX1_UART2_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
}, {
.start = UART2_MINT_RX,
.end = UART2_MINT_RX,
.start = MX1_UART2_MINT_RX,
.end = MX1_UART2_MINT_RX,
.flags = IORESOURCE_IRQ,
}, {
.start = UART2_MINT_TX,
.end = UART2_MINT_TX,
.start = MX1_UART2_MINT_TX,
.end = MX1_UART2_MINT_TX,
.flags = IORESOURCE_IRQ,
}, {
.start = UART2_MINT_RTS,
.end = UART2_MINT_RTS,
.start = MX1_UART2_MINT_RTS,
.end = MX1_UART2_MINT_RTS,
.flags = IORESOURCE_IRQ,
},
};
......@@ -132,12 +133,12 @@ static struct resource imx_rtc_resources[] = {
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
.start = RTC_INT,
.end = RTC_INT,
.start = MX1_RTC_INT,
.end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
.start = RTC_SAMINT,
.end = RTC_SAMINT,
.start = MX1_RTC_SAMINT,
.end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -155,8 +156,8 @@ static struct resource imx_wdt_resources[] = {
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
.start = WDT_INT,
.end = WDT_INT,
.start = MX1_WDT_INT,
.end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -174,32 +175,32 @@ static struct resource imx_usb_resources[] = {
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
.start = USBD_INT0,
.end = USBD_INT0,
.start = MX1_USBD_INT0,
.end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT1,
.end = USBD_INT1,
.start = MX1_USBD_INT1,
.end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT2,
.end = USBD_INT2,
.start = MX1_USBD_INT2,
.end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT3,
.end = USBD_INT3,
.start = MX1_USBD_INT3,
.end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT4,
.end = USBD_INT4,
.start = MX1_USBD_INT4,
.end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT5,
.end = USBD_INT5,
.start = MX1_USBD_INT5,
.end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
.start = USBD_INT6,
.end = USBD_INT6,
.start = MX1_USBD_INT6,
.end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
......@@ -215,23 +216,23 @@ struct platform_device imx_usb_device = {
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
.irq = GPIO_INT_PORTA,
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.irq = GPIO_INT_PORTB,
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.irq = GPIO_INT_PORTC,
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.irq = GPIO_INT_PORTD,
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
......
......@@ -31,9 +31,9 @@
static struct map_desc imx_io_desc[] __initdata = {
{
.virtual = IMX_IO_BASE,
.pfn = __phys_to_pfn(IMX_IO_PHYS),
.length = IMX_IO_SIZE,
.virtual = MX1_IO_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
.length = MX1_IO_SIZE,
.type = MT_DEVICE
}
};
......@@ -41,13 +41,12 @@ static struct map_desc imx_io_desc[] __initdata = {
void __init mx1_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
void __init mx1_init_irq(void)
{
mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
}
......@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
};
static struct resource flash_resource = {
.start = IMX_CS0_PHYS,
.end = IMX_CS0_PHYS + SZ_32M - 1,
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
......@@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = {
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.phys_io = MX1_IO_BASE_ADDR,
.io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
......@@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.phys_io = MX1_IO_BASE_ADDR,
.io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
......
......@@ -31,8 +31,8 @@
* This scb9328 has a 32MiB flash
*/
static struct resource flash_resource = {
.start = IMX_CS0_PHYS,
.end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
.flags = IORESOURCE_MEM,
};
......@@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = {
static struct resource dm9000x_resources[] = {
{
.name = "address area",
.start = IMX_CS5_PHYS,
.end = IMX_CS5_PHYS + 1,
.start = MX1_CS5_PHYS,
.end = MX1_CS5_PHYS + 1,
.flags = IORESOURCE_MEM, /* address access */
}, {
.name = "data area",
.start = IMX_CS5_PHYS + 4,
.end = IMX_CS5_PHYS + 5,
.start = MX1_CS5_PHYS + 4,
.end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
.start = IRQ_GPIOC(3),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment