Commit 05b042a1 authored by Ingo Molnar's avatar Ingo Molnar

x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the...

x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise

When two recent commits that increased the size of the 'struct cpu_entry_area'
were merged in -tip, the 32-bit defconfig build started failing on the following
build time assert:

  ./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_189’ declared with attribute error: BUILD_BUG_ON failed: CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE
  arch/x86/mm/cpu_entry_area.c:189:2: note: in expansion of macro ‘BUILD_BUG_ON’
  In function ‘setup_cpu_entry_area_ptes’,

Which corresponds to the following build time assert:

	BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);

The purpose of this assert is to sanity check the fixed-value definition of
CPU_ENTRY_AREA_PAGES arch/x86/include/asm/pgtable_32_types.h:

	#define CPU_ENTRY_AREA_PAGES    (NR_CPUS * 41)

The '41' is supposed to match sizeof(struct cpu_entry_area)/PAGE_SIZE, which value
we didn't want to define in such a low level header, because it would cause
dependency hell.

Every time the size of cpu_entry_area is changed, we have to adjust CPU_ENTRY_AREA_PAGES
accordingly - and this assert is checking that constraint.

But the assert is both imprecise and buggy, primarily because it doesn't
include the single readonly IDT page that is mapped at CPU_ENTRY_AREA_BASE
(which begins at a PMD boundary).

This bug was hidden by the fact that by accident CPU_ENTRY_AREA_PAGES is defined
too large upstream (v5.4-rc8):

	#define CPU_ENTRY_AREA_PAGES    (NR_CPUS * 40)

While 'struct cpu_entry_area' is 155648 bytes, or 38 pages. So we had two extra
pages, which hid the bug.

The following commit (not yet upstream) increased the size to 40 pages:

  x86/iopl: ("Restrict iopl() permission scope")

... but increased CPU_ENTRY_AREA_PAGES only 41 - i.e. shortening the gap
to just 1 extra page.

Then another not-yet-upstream commit changed the size again:

  880a98c3: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")

Which increased the cpu_entry_area size from 38 to 39 pages, but
didn't change CPU_ENTRY_AREA_PAGES (kept it at 40). This worked
fine, because we still had a page left from the accidental 'reserve'.

But when these two commits were merged into the same tree, the
combined size of cpu_entry_area grew from 38 to 40 pages, while
CPU_ENTRY_AREA_PAGES finally caught up to 40 as well.

Which is fine in terms of functionality, but the assert broke:

	BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);

because CPU_ENTRY_AREA_MAP_SIZE is the total size of the area,
which is 1 page larger due to the IDT page.

To fix all this, change the assert to two precise asserts:

	BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
	BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);

This takes the IDT page into account, and also connects the size-based
define of CPU_ENTRY_AREA_TOTAL_SIZE with the address-subtraction based
define of CPU_ENTRY_AREA_MAP_SIZE.

Also clean up some of the names which made it rather confusing:

 - 'CPU_ENTRY_AREA_TOT_SIZE' wasn't actually the 'total' size of
   the cpu-entry-area, but the per-cpu array size, so rename this
   to CPU_ENTRY_AREA_ARRAY_SIZE.

 - Introduce CPU_ENTRY_AREA_TOTAL_SIZE that _is_ the total mapping
   size, with the IDT included.

 - Add comments where '+1' denotes the IDT mapping - it wasn't
   obvious and took me about 3 hours to decode...

Finally, because this particular commit is actually applied after
this patch:

  880a98c3: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")

Fix the CPU_ENTRY_AREA_PAGES value from 40 pages to the correct 39 pages.

All future commits that change cpu_entry_area will have to adjust
this value precisely.

As a side note, we should probably attempt to remove CPU_ENTRY_AREA_PAGES
and derive its value directly from the structure, without causing
header hell - but that is an adventure for another day! :-)

Fixes: 880a98c3: ("x86/cpu_entry_area: Add guard page for entry stack on 32bit")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@kernel.org
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 4d2fa82d
......@@ -98,7 +98,6 @@ struct cpu_entry_area {
*/
struct cea_exception_stacks estacks;
#endif
#ifdef CONFIG_CPU_SUP_INTEL
/*
* Per CPU debug store for Intel performance monitoring. Wastes a
* full page at the moment.
......@@ -109,11 +108,13 @@ struct cpu_entry_area {
* Reserve enough fixmap PTEs.
*/
struct debug_store_buffers cpu_debug_buffers;
#endif
};
#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
#define CPU_ENTRY_AREA_TOT_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
#define CPU_ENTRY_AREA_ARRAY_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
/* Total size includes the readonly IDT mapping page as well: */
#define CPU_ENTRY_AREA_TOTAL_SIZE (CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE)
DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
......@@ -121,13 +122,14 @@ DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
extern void setup_cpu_entry_areas(void);
extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags);
/* Single page reserved for the readonly IDT mapping: */
#define CPU_ENTRY_AREA_RO_IDT CPU_ENTRY_AREA_BASE
#define CPU_ENTRY_AREA_PER_CPU (CPU_ENTRY_AREA_RO_IDT + PAGE_SIZE)
#define CPU_ENTRY_AREA_RO_IDT_VADDR ((void *)CPU_ENTRY_AREA_RO_IDT)
#define CPU_ENTRY_AREA_MAP_SIZE \
(CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_TOT_SIZE - CPU_ENTRY_AREA_BASE)
(CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE)
extern struct cpu_entry_area *get_cpu_entry_area(int cpu);
......
......@@ -44,11 +44,11 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
* Define this here and validate with BUILD_BUG_ON() in pgtable_32.c
* to avoid include recursion hell
*/
#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 40)
#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 39)
/* The +1 is for the readonly IDT page: */
#define CPU_ENTRY_AREA_BASE \
((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1)) \
& PMD_MASK)
((FIXADDR_TOT_START - PAGE_SIZE*(CPU_ENTRY_AREA_PAGES+1)) & PMD_MASK)
#define LDT_BASE_ADDR \
((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
......
......@@ -178,7 +178,9 @@ static __init void setup_cpu_entry_area_ptes(void)
#ifdef CONFIG_X86_32
unsigned long start, end;
BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
/* The +1 is for the readonly IDT: */
BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
start = CPU_ENTRY_AREA_BASE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment