Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4835/1: Fix stale comment in struct machine_desc description
  [ARM] 4829/1: add .get method to pxa-cpufreq to silence a warning
  [ARM] 4828/1: fix 3 warnings in drivers/video/pxafb.c
  [ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c
  [ARM] 4826/1: Orion: Register the RTC interrupt on the TS-209
  [ARM] pxa: fix clock lookup to find specific device clocks

arch/arm/mach-orion/ts209-setup.c

@@ -192,9 +192,13 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
 /*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
+
+#define TS209_RTC_GPIO	3
+
 static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
        .driver_name = "rtc-s35390a",
        .addr        = 0x30,
+       .irq         = 0,
 };
 
 /****************************************************************************
@@ -328,7 +332,18 @@ static void __init qnap_ts209_init(void)
 
 	platform_add_devices(qnap_ts209_devices,
 				ARRAY_SIZE(qnap_ts209_devices));
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
+			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
+		else
+			gpio_free(TS209_RTC_GPIO);
+	}
+	if (qnap_ts209_i2c_rtc.irq == 0)
+		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+
 	orion_eth_init(&qnap_ts209_eth_data);
 	orion_sata_init(&qnap_ts209_sata_data);
 }

arch/arm/mach-pxa/clock.c

@@ -23,18 +23,27 @@ static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clocks_lock);
 
+static struct clk *clk_lookup(struct device *dev, const char *id)
+{
+	struct clk *p;
+
+	list_for_each_entry(p, &clocks, node)
+		if (strcmp(id, p->name) == 0 && p->dev == dev)
+			return p;
+
+	return NULL;
+}
+
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
 	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 &&
-		    (p->dev == NULL || p->dev == dev)) {
+	p = clk_lookup(dev, id);
+	if (!p)
+		p = clk_lookup(NULL, id);
+	if (p)
 		clk = p;
-			break;
-		}
-	}
 	mutex_unlock(&clocks_mutex);
 
 	return clk;

arch/arm/mach-pxa/cpu-pxa.c

@@ -134,7 +134,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	struct cpufreq_frequency_table *pxa_freqs_table;
 	pxa_freqs_t *pxa_freq_settings;
 	struct cpufreq_freqs freqs;
-	int idx;
+	unsigned int idx;
 	unsigned long flags;
 	unsigned int unused, preset_mdrefr, postset_mdrefr;
 	void *ramstart = phys_to_virt(0xa0000000);
@@ -233,6 +233,11 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
 static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
@@ -269,6 +274,7 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
 	.verify	= pxa_verify_policy,
 	.target	= pxa_set_target,
 	.init	= pxa_cpufreq_init,
+	.get	= pxa_cpufreq_get,
 	.name	= "PXA25x",
 };
 

drivers/i2c/busses/i2c-pxa.c

@@ -138,11 +138,13 @@ static const struct bits icr_bits[] = {
 	PXA_BIT(ICR_UR,     "UR",		"ur"),
 };
 
+#ifdef CONFIG_I2C_PXA_SLAVE
 static void decode_ICR(unsigned int val)
 {
 	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
 	printk("\n");
 }
+#endif
 
 static unsigned int i2c_debug = DEBUG;
 
@@ -1122,7 +1124,7 @@ static int __init i2c_adap_pxa_init(void)
 
 static void i2c_adap_pxa_exit(void)
 {
-	return platform_driver_unregister(&i2c_pxa_driver);
+	platform_driver_unregister(&i2c_pxa_driver);
 }
 
 MODULE_LICENSE("GPL");

drivers/video/pxafb.c

@@ -1046,7 +1046,7 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
 	switch (val) {
 	case CPUFREQ_ADJUST:
 	case CPUFREQ_INCOMPATIBLE:
-		printk(KERN_DEBUG "min dma period: %d ps, "
+		pr_debug("min dma period: %d ps, "
 			"new clock %d kHz\n", pxafb_display_dma_period(var),
 			policy->max);
 		// TODO: fill in min/max values
@@ -1361,7 +1361,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options)
 }
 #endif
 
-int __init pxafb_probe(struct platform_device *dev)
+static int __init pxafb_probe(struct platform_device *dev)
 {
 	struct pxafb_info *fbi;
 	struct pxafb_mach_info *inf;
@@ -1486,7 +1486,7 @@ static struct platform_driver pxafb_driver = {
 };
 
 #ifndef MODULE
-int __devinit pxafb_setup(char *options)
+static int __devinit pxafb_setup(char *options)
 {
 # ifdef CONFIG_FB_PXA_PARAMETERS
 	if (options)
@@ -1501,7 +1501,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 # endif
 #endif
 
-int __devinit pxafb_init(void)
+static int __devinit pxafb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;

include/asm-arm/mach/arch.h

@@ -17,7 +17,7 @@ struct sys_timer;
 struct machine_desc {
 	/*
 	 * Note! The first four elements are used
-	 * by assembler code in head-armv.S
+	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
 	unsigned int		phys_io;	/* start of physical io	*/