Merge bk://matroxfb.bkbits.net/linux-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers/video/Config.help

@@ -387,8 +387,7 @@ CONFIG_FB_MATROX
   Say Y here if you have a Matrox Millennium, Matrox Millennium II,
   Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
   Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-  Matrox G400, G450 or G550 card in your box. At this time, support for 
-  the G-series digital output is almost non-existant.
+  Matrox G400, G450 or G550 card in your box.
 
   This driver is also available as a module ( = code which can be
   inserted and removed from the running kernel whenever you want).
@@ -413,7 +412,7 @@ CONFIG_FB_MATROX_MYSTIQUE
   packed pixel and 32 bpp packed pixel. You can also use font widths
   different from 8.
 
-CONFIG_FB_MATROX_G100
+CONFIG_FB_MATROX_G450
   Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
   video card. If you select "Advanced lowlevel driver options", you
   should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
@@ -423,11 +422,35 @@ CONFIG_FB_MATROX_G100
   If you need support for G400 secondary head, you must first say Y to
   "I2C support" and "I2C bit-banging support" in the character devices
   section, and then to "Matrox I2C support" and "G400 second head
-  support" here in the framebuffer section.
+  support" here in the framebuffer section. G450/G550 secondary head
+  and digital output are supported without additional modules.
+  
+  The driver starts in monitor mode. You must use the matroxset tool 
+  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
+  swap primary and secondary head outputs, or to change output mode.  
+  Secondary head driver always start in 640x480 resolution and you 
+  must use fbset to change it.
+
+  Do not forget that second head supports only 16 and 32 bpp
+  packed pixels, so it is a good idea to compile them into the kernel
+  too. You can use only some font widths, as the driver uses generic
+  painting procedures (the secondary head does not use acceleration
+  engine).
   
-  If you have G550, you must also compile support for G450/G550 secondary
-  head into kernel, otherwise picture will be shown only on output you
-  are probably not using...
+  G450/G550 hardware can display TV picture only from secondary CRTC,
+  and it performs no scaling, so picture must have 525 or 625 lines.
+
+CONFIG_FB_MATROX_G100A
+  Say Y here if you have a Matrox G100, G200 or G400 based
+  video card. If you select "Advanced lowlevel driver options", you
+  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+  pixel and 32 bpp packed pixel. You can also use font widths
+  different from 8.
+
+  If you need support for G400 secondary head, you must first say Y to
+  "I2C support" and "I2C bit-banging support" in the character devices
+  section, and then to "Matrox I2C support" and "G400 second head
+  support" here in the framebuffer section.
 
 CONFIG_FB_MATROX_I2C
   This drivers creates I2C buses which are needed for accessing the
@@ -470,27 +493,6 @@ CONFIG_FB_MATROX_MAVEN
   painting procedures (the secondary head does not use acceleration
   engine).
 
-CONFIG_FB_MATROX_G450
-  Say Y or M here if you want to use a secondary head (meaning two
-  monitors in parallel) on G450, or if you are using analog output
-  of G550.
-
-  If you compile it as module, two modules are created,
-  matroxfb_crtc2.o and matroxfb_g450.o. Both modules are needed if you
-  want two independent display devices.
-
-  The driver starts in monitor mode and currently does not support
-  output in TV modes.  You must use the matroxset tool (available
-  at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to swap
-  primary and secondary head outputs.  Secondary head driver always
-  start in 640x480 resolution and you must use fbset to change it.
-
-  Also do not forget that second head supports only 16 and 32 bpp
-  packed pixels, so it is a good idea to compile them into the kernel
-  too. You can use only some font widths, as the driver uses generic
-  painting procedures (the secondary head does not use acceleration
-  engine).
-
 CONFIG_FB_MATROX_MULTIHEAD
   Say Y here if you have more than one (supported) Matrox device in
   your computer and you want to use all of them for different monitors

drivers/video/Config.in

@@ -130,14 +130,19 @@ if [ "$CONFIG_FB" = "y" ]; then
 	 if [ "$CONFIG_FB_MATROX" != "n" ]; then
 	    bool '    Millennium I/II support' CONFIG_FB_MATROX_MILLENIUM
 	    bool '    Mystique support' CONFIG_FB_MATROX_MYSTIQUE
-	    bool '    G100/G200/G400/G450/G550 support' CONFIG_FB_MATROX_G100
+	    bool '    G100/G200/G400/G450/G550 support' CONFIG_FB_MATROX_G450
+	    if [ "$CONFIG_FB_MATROX_G450" = "n" ]; then
+	       bool '    G100/G200/G400 support' CONFIG_FB_MATROX_G100A
+	    fi
+	    if [ "$CONFIG_FB_MATROX_G450" = "y" -o "$CONFIG_FB_MATROX_G100A" = "y" ]; then
+	       define_bool CONFIG_FB_MATROX_G100 y
+	    fi
             if [ "$CONFIG_I2C" != "n" ]; then
 	       dep_tristate '      Matrox I2C support' CONFIG_FB_MATROX_I2C $CONFIG_FB_MATROX $CONFIG_I2C_ALGOBIT
 	       if [ "$CONFIG_FB_MATROX_G100" = "y" ]; then
 	          dep_tristate '      G400 second head support' CONFIG_FB_MATROX_MAVEN $CONFIG_FB_MATROX_I2C
 	       fi
             fi
-            dep_tristate '      G450/G550 second head support (mandatory for G550)' CONFIG_FB_MATROX_G450 $CONFIG_FB_MATROX_G100
 	    bool '    Multihead support' CONFIG_FB_MATROX_MULTIHEAD
 	 fi
 	 tristate '  ATI Mach64 display support (EXPERIMENTAL)' CONFIG_FB_ATY

drivers/video/matrox/Makefile

@@ -5,16 +5,16 @@
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs    :=  matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o g450_pll.o
+export-objs    :=  matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o g450_pll.o matroxfb_g450.o
 
 # Each configuration option enables a list of files.
 
-my-obj-$(CONFIG_FB_MATROX_G100)	  := g450_pll.o
+my-obj-$(CONFIG_FB_MATROX_G100)	  += g450_pll.o
+my-obj-$(CONFIG_FB_MATROX_G450)   += matroxfb_g450.o matroxfb_crtc2.o
 
 obj-$(CONFIG_FB_MATROX)           += matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o $(my-obj-y)
 obj-$(CONFIG_FB_MATROX_I2C)       += i2c-matroxfb.o
 obj-$(CONFIG_FB_MATROX_MAVEN)     += matroxfb_maven.o matroxfb_crtc2.o
-obj-$(CONFIG_FB_MATROX_G450)	  += matroxfb_g450.o matroxfb_crtc2.o
 
 include $(TOPDIR)/Rules.make
 

drivers/video/matrox/g450_pll.c

@@ -2,11 +2,11 @@
  *
  * Hardware accelerated Matrox PCI cards - G450/G550 PLL control.
  *
- * (c) 2001 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 2001-2002 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
  * Portions Copyright (c) 2001 Matrox Graphics Inc.
  *
- * Version: 1.62 2001/11/29
+ * Version: 1.64 2002/06/10
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
@@ -33,6 +33,10 @@ static unsigned int g450_mnp2vco(CPMINFO unsigned int mnp) {
 	return (ACCESS_FBINFO(features).pll.ref_freq * n + (m >> 1)) / m;
 }
 
+unsigned int g450_mnp2f(CPMINFO unsigned int mnp) {
+	return g450_vco2f(mnp, g450_mnp2vco(PMINFO mnp));
+}
+
 static inline unsigned int pll_freq_delta(unsigned int f1, unsigned int f2) {
 	if (f2 < f1) {
     		f2 = f1 - f2;
@@ -52,40 +56,42 @@ static unsigned int g450_nextpll(CPMINFO const struct matrox_pll_limits* pi, uns
 	m = (mnp >> 16) & 0xFF;
 	p = mnp & 0xFF;
 
-	if (m == 0 || m == 0xFF) {
-		if (m == 0) {
-			if (p & 0x40) {
-				return NO_MORE_MNP;
+	do {
+		if (m == 0 || m == 0xFF) {
+			if (m == 0) {
+				if (p & 0x40) {
+					return NO_MORE_MNP;
+				}
+			        if (p & 3) {
+					p--;
+				} else {
+					p = 0x40;
+				}
+				tvco >>= 1;
+				if (tvco < pi->vcomin) {
+					return NO_MORE_MNP;
+				}
+				*fvco = tvco;
 			}
-		        if (p & 3) {
-				p--;
+
+			p &= 0x43;
+			if (tvco < 550000) {
+/*				p |= 0x00; */
+			} else if (tvco < 700000) {
+				p |= 0x08;
+			} else if (tvco < 1000000) {
+				p |= 0x10;
+			} else if (tvco < 1150000) {
+				p |= 0x18;
 			} else {
-				p = 0x40;
+				p |= 0x20;
 			}
-			tvco >>= 1;
-			if (tvco < pi->vcomin) {
-				return NO_MORE_MNP;
-			}
-			*fvco = tvco;
-		}
-
-		p &= 0x43;
-		if (tvco < 550000) {
-/*			p |= 0x00; */
-		} else if (tvco < 700000) {
-			p |= 0x08;
-		} else if (tvco < 1000000) {
-			p |= 0x10;
-		} else if (tvco < 1150000) {
-			p |= 0x18;
+			m = 9;
 		} else {
-			p |= 0x20;
+			m--;
 		}
-		m = 9;
-	} else {
-		m--;
-	}
-        n = ((tvco * (m+1) + ACCESS_FBINFO(features).pll.ref_freq) / (ACCESS_FBINFO(features).pll.ref_freq * 2)) - 2;
+        	n = ((tvco * (m+1) + ACCESS_FBINFO(features).pll.ref_freq) / (ACCESS_FBINFO(features).pll.ref_freq * 2)) - 2;
+	} while (n < 0x03 || n > 0x7A);
 	return (m << 16) | (n << 8) | p;
 }
 
@@ -219,7 +225,7 @@ static void updatehwstate_clk(struct matrox_hw_state* hw, unsigned int mnp, unsi
 	}
 }
 
-static inline void g450_setpll_cond(WPMINFO unsigned int mnp, unsigned int pll) {
+void matroxfb_g450_setpll_cond(WPMINFO unsigned int mnp, unsigned int pll) {
 	if (g450_cmppll(PMINFO mnp, pll)) {
 		g450_setpll(PMINFO mnp, pll);
 	}
@@ -385,10 +391,8 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 			unsigned int vco;
 			unsigned int delta;
 
-			if ((mnp & 0xFF00) < 0x0300 || (mnp & 0xFF00) > 0x7A00) {
-				continue;
-			}
 			vco = g450_mnp2vco(PMINFO mnp);
+#if 0			
 			if (pll == M_VIDEO_PLL) {
 				unsigned int big, small;
 
@@ -406,6 +410,7 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 					continue;
 				}
 			}
+#endif			
 			delta = pll_freq_delta(fout, g450_vco2f(mnp, vco));
 			for (idx = mnpcount; idx > 0; idx--) {
 				/* == is important; due to nextpll algorithm we get
@@ -426,7 +431,7 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 	}
 	/* VideoPLL and PixelPLL matched: do nothing... In all other cases we should get at least one frequency */
 	if (!mnpcount) {
-		return 1;
+		return -EBUSY;
 	}
 	{
 		unsigned long flags;
@@ -435,15 +440,15 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 		matroxfb_DAC_lock_irqsave(flags);
 		mnp = g450_checkcache(PMINFO ci, mnparray[0]);
 		if (mnp != NO_MORE_MNP) {
-			g450_setpll_cond(PMINFO mnp, pll);
+			matroxfb_g450_setpll_cond(PMINFO mnp, pll);
 		} else {
 			mnp = g450_findworkingpll(PMINFO pll, mnparray, mnpcount);
 			g450_addcache(ci, mnparray[0], mnp);
 		}
 		updatehwstate_clk(&ACCESS_FBINFO(hw), mnp, pll);
 		matroxfb_DAC_unlock_irqrestore(flags);
+		return mnp;
 	}
-	return 0;
 }
 
 /* It must be greater than number of possible PLL values.
@@ -465,8 +470,10 @@ int matroxfb_g450_setclk(WPMINFO unsigned int fout, unsigned int pll) {
 }
 
 EXPORT_SYMBOL(matroxfb_g450_setclk);
+EXPORT_SYMBOL(g450_mnp2f);
+EXPORT_SYMBOL(matroxfb_g450_setpll_cond);
 
-MODULE_AUTHOR("(c) 2001 Petr Vandrovec <vandrove@vc.cvut.cz>");
+MODULE_AUTHOR("(c) 2001-2002 Petr Vandrovec <vandrove@vc.cvut.cz>");
 MODULE_DESCRIPTION("Matrox G450/G550 PLL driver");
 
 MODULE_LICENSE("GPL");

drivers/video/matrox/g450_pll.h

@@ -4,5 +4,7 @@
 #include "matroxfb_base.h"
 
 int matroxfb_g450_setclk(WPMINFO unsigned int fout, unsigned int pll);
+unsigned int g450_mnp2f(CPMINFO unsigned int mnp);
+void matroxfb_g450_setpll_cond(WPMINFO unsigned int mnp, unsigned int pll);
 
 #endif	/* __G450_PLL_H__ */

drivers/video/matrox/matroxfb_DAC1064.h

@@ -146,6 +146,8 @@ void DAC1064_global_restore(WPMINFO2);
 
 #define M1064_XPWRCTRL		0xA0
 
+#define M1064_XPANMODE		0xA2
+
 enum POS1064 {
 	POS1064_XCURADDL=0, POS1064_XCURADDH, POS1064_XCURCTRL,
 	POS1064_XCURCOL0RED, POS1064_XCURCOL0GREEN, POS1064_XCURCOL0BLUE,
@@ -156,7 +158,7 @@ enum POS1064 {
 	POS1064_XGENIOCTRL, POS1064_XGENIODATA, POS1064_XZOOMCTRL, POS1064_XSENSETEST,
 	POS1064_XCRCBITSEL,
 	POS1064_XCOLKEYMASKL, POS1064_XCOLKEYMASKH, POS1064_XCOLKEYL, POS1064_XCOLKEYH,
-	POS1064_XOUTPUTCONN };
+	POS1064_XOUTPUTCONN, POS1064_XPANMODE, POS1064_XPWRCTRL };
 
 
 #endif	/* __MATROXFB_DAC1064_H__ */

drivers/video/matrox/matroxfb_Ti3026.c

@@ -2,11 +2,11 @@
  *
  * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400
  *
- * (c) 1998,1999,2000 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
  * Portions Copyright (c) 2001 Matrox Graphics Inc.
  *
- * Version: 1.62 2000/11/29
+ * Version: 1.65 2002/08/14
  *
  * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org>
  *
@@ -84,6 +84,7 @@
 #include "matroxfb_Ti3026.h"
 #include "matroxfb_misc.h"
 #include "matroxfb_accel.h"
+#include <linux/matroxfb.h>
 
 #ifdef CONFIG_FB_MATROX_MILLENIUM
 #define outTi3026 matroxfb_DAC_out
@@ -401,7 +402,7 @@ static int matroxfb_ti3026_setfont(struct display* p, int width, int height) {
 	return 0;
 }
 
-static int matroxfb_ti3026_selhwcursor(WPMINFO struct display* p) {
+static int matroxfb_ti3026_selhwcursor(WPMINFO2) {
 	ACCESS_FBINFO(dispsw.cursor) = matroxfb_ti3026_cursor;
 	ACCESS_FBINFO(dispsw.set_font) = matroxfb_ti3026_setfont;
 	return 0;
@@ -433,7 +434,7 @@ static int Ti3026_setpclk(WPMINFO int clk, struct display* p) {
 	hw->DACclk[1] = pixfeed;
 	hw->DACclk[2] = pixpost | 0xB0;
 
-	if (p->type == FB_TYPE_TEXT) {
+	if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 		hw->DACreg[POS3026_XMEMPLLCTRL] = TVP3026_XMEMPLLCTRL_MCLK_MCLKPLL | TVP3026_XMEMPLLCTRL_RCLK_PIXPLL;
 		hw->DACclk[3] = 0xFD;
 		hw->DACclk[4] = 0x3D;
@@ -501,7 +502,7 @@ static int Ti3026_init(WPMINFO struct my_timming* m, struct display* p) {
 	DBG("Ti3026_init")
 
 	memcpy(hw->DACreg, MGADACbpp32, sizeof(hw->DACreg));
-	if (p->type == FB_TYPE_TEXT) {
+	if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 		hw->DACreg[POS3026_XLATCHCTRL] = TVP3026_XLATCHCTRL_8_1;
 		hw->DACreg[POS3026_XTRUECOLORCTRL] = TVP3026_XTRUECOLORCTRL_PSEUDOCOLOR;
 		hw->DACreg[POS3026_XMUXCTRL] = TVP3026_XMUXCTRL_VGA;
@@ -568,7 +569,7 @@ static int Ti3026_init(WPMINFO struct my_timming* m, struct display* p) {
 
 	/* set interleaving */
 	hw->MXoptionReg &= ~0x00001000;
-	if ((p->type != FB_TYPE_TEXT) && isInterleave(MINFO)) hw->MXoptionReg |= 0x00001000;
+	if ((ACCESS_FBINFO(fbcon).fix.type != FB_TYPE_TEXT) && isInterleave(MINFO)) hw->MXoptionReg |= 0x00001000;
 
 	/* set DAC */
 	Ti3026_setpclk(PMINFO m->pixclock, p);
@@ -811,6 +812,10 @@ static void Ti3026_reset(WPMINFO2) {
 	ti3026_ramdac_init(PMINFO2);
 }
 
+static struct matrox_altout ti3026_output = {
+	.name	 = "Primary output",
+};
+
 static int Ti3026_preinit(WPMINFO2) {
 	static const int vxres_mill2[] = { 512,        640, 768,  800,  832,  960,
 					  1024, 1152, 1280,      1600, 1664, 1920,
@@ -829,6 +834,11 @@ static int Ti3026_preinit(WPMINFO2) {
 	ACCESS_FBINFO(capable.vxres) = isMilleniumII(MINFO)?vxres_mill2:vxres_mill1;
 	ACCESS_FBINFO(cursor.timer.function) = matroxfb_ti3026_flashcursor;
 
+	ACCESS_FBINFO(outputs[0]).data = MINFO;
+	ACCESS_FBINFO(outputs[0]).output = &ti3026_output;
+	ACCESS_FBINFO(outputs[0]).src = MATROXFB_SRC_CRTC1;
+	ACCESS_FBINFO(outputs[0]).mode = MATROXFB_OUTPUT_MODE_MONITOR;
+
 	if (ACCESS_FBINFO(devflags.noinit))
 		return 0;
 	/* preserve VGA I/O, BIOS and PPC */

drivers/video/matrox/matroxfb_accel.c

@@ -2,9 +2,9 @@
  *
  * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400
  *
- * (c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
- * Version: 1.51 2001/06/18
+ * Version: 1.65 2002/08/14
  *
  * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org>
  *
@@ -85,21 +85,21 @@
 
 #define mga_ydstlen(y,l) mga_outl(M_YDSTLEN | M_EXEC, ((y) << 16) | (l))
 
-void matrox_cfbX_init(WPMINFO struct display* p) {
+void matrox_cfbX_init(WPMINFO2) {
 	u_int32_t maccess;
 	u_int32_t mpitch;
 	u_int32_t mopmode;
 
 	DBG("matrox_cfbX_init")
 
-	mpitch = p->var.xres_virtual;
+	mpitch = ACCESS_FBINFO(fbcon).var.xres_virtual;
 
-	if (p->type == FB_TYPE_TEXT) {
+	if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 		maccess = 0x00000000;
 		mpitch = (mpitch >> 4) | 0x8000; /* set something */
 		mopmode = M_OPMODE_8BPP;
 	} else {
-		switch (p->var.bits_per_pixel) {
+		switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) {
 		case 4:		maccess = 0x00000000;	/* accelerate as 8bpp video */
 				mpitch = (mpitch >> 1) | 0x8000; /* disable linearization */
 				mopmode = M_OPMODE_4BPP;
@@ -107,7 +107,7 @@ void matrox_cfbX_init(WPMINFO struct display* p) {
 		case 8:		maccess = 0x00000000;
 				mopmode = M_OPMODE_8BPP;
 				break;
-		case 16:	if (p->var.green.length == 5)
+		case 16:	if (ACCESS_FBINFO(fbcon).var.green.length == 5)
 					maccess = 0xC0000001;
 				else
 					maccess = 0x40000001;
@@ -816,7 +816,7 @@ static void matrox_cfbX_clear_margins(struct vc_data* conp, struct display* p, i
 static void matrox_text_setup(struct display* p) {
 	MINFO_FROM_DISP(p);
 
-	p->next_line = p->line_length ? p->line_length : ((p->var.xres_virtual / (fontwidth(p)?fontwidth(p):8)) * ACCESS_FBINFO(devflags.textstep));
+	p->next_line = ACCESS_FBINFO(fbcon).fix.line_length ? ACCESS_FBINFO(fbcon).fix.line_length : ((p->var.xres_virtual / (fontwidth(p)?fontwidth(p):8)) * ACCESS_FBINFO(devflags.textstep));
 	p->next_plane = 0;
 }
 
@@ -1040,7 +1040,7 @@ static int matrox_text_setfont(struct display* p, int width, int height) {
 		MINFO_FROM_DISP(p);
 
 		matrox_text_round(PMINFO &p->var, p);
-		p->next_line = p->line_length = ((p->var.xres_virtual / (fontwidth(p)?fontwidth(p):8)) * ACCESS_FBINFO(devflags.textstep));
+		p->next_line = ACCESS_FBINFO(fbcon).fix.line_length = ((p->var.xres_virtual / (fontwidth(p)?fontwidth(p):8)) * ACCESS_FBINFO(devflags.textstep));
 
 		if (p->conp)
 			matrox_text_createcursor(PMINFO p);
@@ -1144,11 +1144,11 @@ void initMatrox(WPMINFO struct display* p) {
 	if (p->dispsw && p->conp)
 		fb_con.con_cursor(p->conp, CM_ERASE);
 	p->dispsw_data = NULL;
-	if ((p->var.accel_flags & FB_ACCELF_TEXT) != FB_ACCELF_TEXT) {
-		if (p->type == FB_TYPE_TEXT) {
+	if ((ACCESS_FBINFO(fbcon).var.accel_flags & FB_ACCELF_TEXT) != FB_ACCELF_TEXT) {
+		if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 			swtmp = &matroxfb_text;
 		} else {
-			switch (p->var.bits_per_pixel) {
+			switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) {
 #ifdef FBCON_HAS_CFB4
 			case 4:
 				swtmp = &fbcon_cfb4;
@@ -1183,10 +1183,10 @@ void initMatrox(WPMINFO struct display* p) {
 			}
 		}
 		dprintk(KERN_INFO "matroxfb: acceleration disabled\n");
-	} else if (p->type == FB_TYPE_TEXT) {
+	} else if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 		swtmp = &matroxfb_text;
 	} else {
-		switch (p->var.bits_per_pixel) {
+		switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) {
 #ifdef FBCON_HAS_CFB4
 		case 4:
 			swtmp = &matroxfb_cfb4;
@@ -1222,8 +1222,8 @@ void initMatrox(WPMINFO struct display* p) {
 	}
 	memcpy(&ACCESS_FBINFO(dispsw), swtmp, sizeof(ACCESS_FBINFO(dispsw)));
 	p->dispsw = &ACCESS_FBINFO(dispsw);
-	if ((p->type != FB_TYPE_TEXT) && ACCESS_FBINFO(devflags.hwcursor)) {
-		ACCESS_FBINFO(hw_switch)->selhwcursor(PMINFO p);
+	if ((ACCESS_FBINFO(fbcon).fix.type != FB_TYPE_TEXT) && ACCESS_FBINFO(devflags.hwcursor)) {
+		ACCESS_FBINFO(hw_switch)->selhwcursor(PMINFO2);
 	}
 }
 
@@ -1233,7 +1233,7 @@ void matrox_init_putc(WPMINFO struct display* p, void (*dac_createcursor)(WPMINF
 	int i;
 
 	if (p && p->conp) {
-		if (p->type == FB_TYPE_TEXT) {
+		if (ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT) {
 			matrox_text_createcursor(PMINFO p);
 			matrox_text_loadfont(PMINFO p);
 			i = 0;

drivers/video/matrox/matroxfb_accel.h

@@ -4,7 +4,7 @@
 #include "matroxfb_base.h"
 
 void matrox_init_putc(WPMINFO struct display* p, void (*)(WPMINFO struct display *p));
-void matrox_cfbX_init(WPMINFO struct display* p);
+void matrox_cfbX_init(WPMINFO2);
 void matrox_text_round(CPMINFO struct fb_var_screeninfo* var, struct display* p);
 void initMatrox(WPMINFO struct display* p);
 

drivers/video/matrox/matroxfb_base.h

@@ -2,7 +2,7 @@
  *
  * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200, G400 and G450
  *
- * (c) 1998,1999,2000,2001 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
  */
 #ifndef __MATROXFB_H__
@@ -288,6 +288,8 @@ static inline void mga_iounmap(vaddr_t va) {
 
 struct my_timming {
 	unsigned int pixclock;
+	int mnp;
+	unsigned int crtc;
 	unsigned int HDisplay;
 	unsigned int HSyncStart;
 	unsigned int HSyncEnd;
@@ -364,6 +366,10 @@ struct mavenregs {
 	u_int16_t hcorr;
 };
 
+struct matrox_crtc2 {
+	u_int32_t ctl;
+};
+
 struct matrox_hw_state {
 	u_int32_t	MXoptionReg;
 	unsigned char	DACclk[6];
@@ -381,10 +387,7 @@ struct matrox_hw_state {
 	/* TVOut only */
 	struct mavenregs	maven;
 
-	/* CRTC2 only */
-	/* u_int32_t	TBD */
-
-	unsigned int	vidclk;
+	struct matrox_crtc2	crtc2;
 };
 
 struct matrox_accel_data {
@@ -396,15 +399,17 @@ struct matrox_accel_data {
 };
 
 struct matrox_altout {
+	const char	*name;
 	int		(*compute)(void* altout_dev, struct my_timming* input);
 	int		(*program)(void* altout_dev);
 	int		(*start)(void* altout_dev);
-	void		(*incuse)(void* altout_dev);
-	void		(*decuse)(void* altout_dev);
-	int		(*setmode)(void* altout_dev, u_int32_t mode);
-	int		(*getmode)(void* altout_dev, u_int32_t* mode);
+	int		(*verifymode)(void* altout_dev, u_int32_t mode);
 };
 
+#define MATROXFB_SRC_NONE	0
+#define MATROXFB_SRC_CRTC1	1
+#define MATROXFB_SRC_CRTC2	2
+
 enum mga_chip { MGA_2064, MGA_2164, MGA_1064, MGA_1164, MGA_G100, MGA_G200, MGA_G400, MGA_G450, MGA_G550 };
 
 struct matrox_bios {
@@ -421,9 +426,9 @@ struct matrox_bios {
 
 struct matrox_switch;
 struct matroxfb_driver;
+struct matroxfb_dh_fb_info;
 
 struct matrox_fb_info {
-	/* fb_info must be first */
 	struct fb_info		fbcon;
 
 	struct list_head	next_fb;
@@ -439,20 +444,25 @@ struct matrox_fb_info {
 	struct pci_dev*		pcidev;
 
 	struct {
-		u_int32_t	all;
-		u_int32_t	ph;
-		u_int32_t	sh;
-			      } output;
-	struct matrox_altout*	primout;
+		unsigned int	pixclock;
+		int		mnp;
+			      } crtc1;
 	struct {
-	struct fb_info*		info;
+		unsigned int 	pixclock;
+		int		mnp;
+	struct matroxfb_dh_fb_info*	info;
 	struct rw_semaphore	lock;
 			      } crtc2;
 	struct {
-	struct matrox_altout*	output;
-	void*			device;
-	struct rw_semaphore	lock;
+ 	struct rw_semaphore	lock;
 			      } altout;
+#define MATROXFB_MAX_OUTPUTS		3
+	struct {
+	unsigned int		src;
+	struct matrox_altout*	output;
+	void*			data;
+	unsigned int		mode;
+			      } outputs[MATROXFB_MAX_OUTPUTS];
 
 #define MATROXFB_MAX_FB_DRIVERS		5
 	struct matroxfb_driver* (drivers[MATROXFB_MAX_FB_DRIVERS]);
@@ -541,6 +551,8 @@ struct matrox_fb_info {
 		int		memtype;
 		int		g450dac;
 		int		dfp_type;
+		int		panellink;	/* G400 DFP possible (not G450/G550) */
+		int		dualhead;
 		unsigned int	fbResource;
 			      } devflags;
 	struct display_switch	dispsw;
@@ -618,7 +630,7 @@ struct matrox_fb_info {
 #define PMINFO   PMINFO2 ,
 
 static inline struct matrox_fb_info* mxinfo(const struct display* p) {
-	return (struct matrox_fb_info*)p->fb_info;
+	return container_of(p->fb_info, struct matrox_fb_info, fbcon);
 }
 
 #define PMXINFO(p)	   mxinfo(p),
@@ -658,7 +670,7 @@ struct matrox_switch {
 	void	(*reset)(WPMINFO2);
 	int	(*init)(WPMINFO struct my_timming*, struct display*);
 	void	(*restore)(WPMINFO struct display*);
-	int	(*selhwcursor)(WPMINFO struct display*);
+	int	(*selhwcursor)(WPMINFO2);
 };
 
 struct matroxfb_driver {

drivers/video/matrox/matroxfb_crtc2.h

@@ -27,8 +27,9 @@ struct matroxfb_dh_fb_info {
 		unsigned int	len;
 			      } mmio;
 
-	int			currcon;
 	struct display*		currcon_display;
+	
+	int			interlaced:1;
 
 	union {
 #ifdef FBCON_HAS_CFB16

drivers/video/matrox/matroxfb_g450.h

 #ifndef __MATROXFB_G450_H__
 #define __MATROXFB_G450_H__
 
-#include <linux/ioctl.h>
 #include "matroxfb_base.h"
 
-struct matroxfb_g450_info {
-	struct matrox_fb_info*	primary_dev;
-	unsigned int		timmings;
-};
+#ifdef CONFIG_FB_MATROX_G450
+void matroxfb_g450_connect(WPMINFO2);
+void matroxfb_g450_shutdown(WPMINFO2);
+#else
+static inline void matroxfb_g450_connect(WPMINFO2) { };
+static inline void matroxfb_g450_shutdown(WPMINFO2) { };
+#endif
 
-#endif /* __MATROXFB_MAVEN_H__ */
+#endif /* __MATROXFB_G450_H__ */

drivers/video/matrox/matroxfb_maven.h

@@ -6,21 +6,15 @@
 #include <linux/i2c-algo-bit.h>
 #include "matroxfb_base.h"
 
-struct matroxfb_dh_maven_info;
-
 struct i2c_bit_adapter {
 	struct i2c_adapter		adapter;
 	int				initialized;
 	struct i2c_algo_bit_data	bac;
-	struct matroxfb_dh_maven_info  *minfo;
-};
-
-struct matroxfb_dh_maven_info {
-	struct matrox_fb_info*	primary_dev;
-
-	struct i2c_bit_adapter	maven;
-	struct i2c_bit_adapter	ddc1;
-	struct i2c_bit_adapter	ddc2;
+	struct matrox_fb_info*		minfo;
+	struct {
+		unsigned int		data;
+		unsigned int		clock;
+				      } mask;
 };
 
 #endif /* __MATROXFB_MAVEN_H__ */

drivers/video/matrox/matroxfb_misc.c

@@ -2,11 +2,11 @@
  *
  * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400
  *
- * (c) 1998,1999,2000,2001 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
  * Portions Copyright (c) 2001 Matrox Graphics Inc.
  *
- * Version: 1.62 2001/11/29
+ * Version: 1.65 2002/08/14
  *
  * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org>
  *
@@ -146,6 +146,7 @@ void matroxfb_var2my(struct fb_var_screeninfo* var, struct my_timming* mt) {
 	if (!pixclock) pixclock = 10000;	/* 10ns = 100MHz */
 	mt->pixclock = 1000000000 / pixclock;
 	if (mt->pixclock < 1) mt->pixclock = 1;
+	mt->mnp = -1;
 	mt->dblscan = var->vmode & FB_VMODE_DOUBLE;
 	mt->interlaced = var->vmode & FB_VMODE_INTERLACED;
 	mt->HDisplay = var->xres;
@@ -226,7 +227,7 @@ int matroxfb_vgaHWinit(WPMINFO struct my_timming* m, struct display* p) {
 	unsigned int wd;
 	unsigned int divider;
 	int i;
-	int text = p->type == FB_TYPE_TEXT;
+	int text = ACCESS_FBINFO(fbcon).fix.type == FB_TYPE_TEXT;
 	int fwidth;
 	struct matrox_hw_state * const hw = &ACCESS_FBINFO(hw);
 
@@ -360,7 +361,8 @@ int matroxfb_vgaHWinit(WPMINFO struct my_timming* m, struct display* p) {
 			  ((hd      & 0x100) >> 7) | /* blanking */
 			  ((hs      & 0x100) >> 6) | /* sync start */
 			   (hbe     & 0x040);	 /* end hor. blanking */
-	if (ACCESS_FBINFO(output.ph) & MATROXFB_OUTPUT_CONN_SECONDARY)
+	/* FIXME: Enable vidrst only on G400, and only if TV-out is used */
+	if (ACCESS_FBINFO(outputs[1]).src == MATROXFB_SRC_CRTC1)
 		hw->CRTCEXT[1] |= 0x88;		/* enable horizontal and vertical vidrst */
 	hw->CRTCEXT[2] =  ((vt & 0xC00) >> 10) |
 			  ((vd & 0x400) >>  8) |	/* disp end */
@@ -872,7 +874,7 @@ static int parse_pins5(WPMINFO const struct matrox_bios* bd) {
 	mult = bd->pins[4]?8000:6000;
 	
 	MINFO->limits.pixel.vcomax	= (bd->pins[ 38] == 0xFF) ? 600000			: bd->pins[ 38] * mult;
-	MINFO->limits.system.vcomax	= (bd->pins[ 36] == 0xFF) ? MINFO->limits.pixel.vcomax	: bd->pins[ 39] * mult;
+	MINFO->limits.system.vcomax	= (bd->pins[ 36] == 0xFF) ? MINFO->limits.pixel.vcomax	: bd->pins[ 36] * mult;
 	MINFO->limits.video.vcomax	= (bd->pins[ 37] == 0xFF) ? MINFO->limits.system.vcomax	: bd->pins[ 37] * mult;
 	MINFO->limits.pixel.vcomin	= (bd->pins[123] == 0xFF) ? 256000			: bd->pins[123] * mult;
 	MINFO->limits.system.vcomin	= (bd->pins[121] == 0xFF) ? MINFO->limits.pixel.vcomin	: bd->pins[121] * mult;
@@ -1011,6 +1013,6 @@ EXPORT_SYMBOL(matroxfb_vgaHWinit);		/* DAC1064, Ti3026 */
 EXPORT_SYMBOL(matroxfb_vgaHWrestore);		/* DAC1064, Ti3026 */
 EXPORT_SYMBOL(matroxfb_read_pins);
 
-MODULE_AUTHOR("(c) 1999-2001 Petr Vandrovec <vandrove@vc.cvut.cz>");
+MODULE_AUTHOR("(c) 1999-2002 Petr Vandrovec <vandrove@vc.cvut.cz>");
 MODULE_DESCRIPTION("Miscellaneous support for Matrox video cards");
 MODULE_LICENSE("GPL");