Commit 08411594 authored by Marek Vasut's avatar Marek Vasut Committed by Eric Miao

[ARM] pxa/spitz: Formating and naming fixes

Improve formating so checkpatch passes. Also, change some function and variable
names to make the naming consistent.
Signed-off-by: default avatarMarek Vasut <marek.vasut@gmail.com>
parent 2d679827
......@@ -133,10 +133,8 @@ static unsigned long spitz_pin_config[] __initdata = {
* Scoop GPIO expander
******************************************************************************/
#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
/*
* Spitz SCOOP Device #1
*/
static struct resource spitz_scoop_resources[] = {
/* SCOOP Device #1 */
static struct resource spitz_scoop_1_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
......@@ -144,7 +142,7 @@ static struct resource spitz_scoop_resources[] = {
},
};
static struct scoop_config spitz_scoop_setup = {
static struct scoop_config spitz_scoop_1_setup = {
.io_dir = SPITZ_SCP_IO_DIR,
.io_out = SPITZ_SCP_IO_OUT,
.suspend_clr = SPITZ_SCP_SUS_CLR,
......@@ -152,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = {
.gpio_base = SPITZ_SCP_GPIO_BASE,
};
struct platform_device spitzscoop_device = {
struct platform_device spitz_scoop_1_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
.platform_data = &spitz_scoop_setup,
.platform_data = &spitz_scoop_1_setup,
},
.num_resources = ARRAY_SIZE(spitz_scoop_resources),
.resource = spitz_scoop_resources,
.num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
.resource = spitz_scoop_1_resources,
};
/*
* Spitz SCOOP Device #2
*/
static struct resource spitz_scoop2_resources[] = {
/* SCOOP Device #2 */
static struct resource spitz_scoop_2_resources[] = {
[0] = {
.start = 0x08800040,
.end = 0x08800fff,
......@@ -173,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = {
},
};
static struct scoop_config spitz_scoop2_setup = {
static struct scoop_config spitz_scoop_2_setup = {
.io_dir = SPITZ_SCP2_IO_DIR,
.io_out = SPITZ_SCP2_IO_OUT,
.suspend_clr = SPITZ_SCP2_SUS_CLR,
......@@ -181,23 +177,23 @@ static struct scoop_config spitz_scoop2_setup = {
.gpio_base = SPITZ_SCP2_GPIO_BASE,
};
struct platform_device spitzscoop2_device = {
struct platform_device spitz_scoop_2_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
.platform_data = &spitz_scoop2_setup,
.platform_data = &spitz_scoop_2_setup,
},
.num_resources = ARRAY_SIZE(spitz_scoop2_resources),
.resource = spitz_scoop2_resources,
.num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
.resource = spitz_scoop_2_resources,
};
static void __init spitz_scoop_init(void)
{
platform_device_register(&spitz_scoop1_device);
platform_device_register(&spitz_scoop_1_device);
/* Akita doesn't have the second SCOOP chip */
if (!machine_is_akita())
platform_device_register(&spitzscoop2_device);
platform_device_register(&spitz_scoop_2_device);
}
/* Power control is shared with between one of the CF slots and SD */
......@@ -250,16 +246,16 @@ static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
}
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
{
.dev = &spitzscoop_device.dev,
{
.dev = &spitz_scoop_1_device.dev,
.irq = SPITZ_IRQ_GPIO_CF_IRQ,
.cd_irq = SPITZ_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},{
.dev = &spitzscoop2_device.dev,
}, {
.dev = &spitz_scoop_2_device.dev,
.irq = SPITZ_IRQ_GPIO_CF2_IRQ,
.cd_irq = -1,
},
},
};
static struct scoop_pcmcia_config spitz_pcmcia_config = {
......@@ -300,7 +296,7 @@ static inline void spitz_pcmcia_init(void) {}
#define SPITZ_KEY_OK KEY_F11
#define SPITZ_KEY_MENU KEY_F12
static const uint32_t spitzkbd_keymap[] = {
static const uint32_t spitz_keymap[] = {
KEY(0, 0, KEY_LEFTCTRL),
KEY(0, 1, KEY_1),
KEY(0, 2, KEY_3),
......@@ -367,38 +363,38 @@ static const uint32_t spitzkbd_keymap[] = {
KEY(6, 8, KEY_RIGHT),
};
static const struct matrix_keymap_data spitzkbd_keymap_data = {
.keymap = spitzkbd_keymap,
.keymap_size = ARRAY_SIZE(spitzkbd_keymap),
static const struct matrix_keymap_data spitz_keymap_data = {
.keymap = spitz_keymap,
.keymap_size = ARRAY_SIZE(spitz_keymap),
};
static const uint32_t spitzkbd_row_gpios[] =
static const uint32_t spitz_row_gpios[] =
{ 12, 17, 91, 34, 36, 38, 39 };
static const uint32_t spitzkbd_col_gpios[] =
static const uint32_t spitz_col_gpios[] =
{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
static struct matrix_keypad_platform_data spitzkbd_pdata = {
.keymap_data = &spitzkbd_keymap_data,
.row_gpios = spitzkbd_row_gpios,
.col_gpios = spitzkbd_col_gpios,
.num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
.num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
static struct matrix_keypad_platform_data spitz_mkp_pdata = {
.keymap_data = &spitz_keymap_data,
.row_gpios = spitz_row_gpios,
.col_gpios = spitz_col_gpios,
.num_row_gpios = ARRAY_SIZE(spitz_row_gpios),
.num_col_gpios = ARRAY_SIZE(spitz_col_gpios),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
};
static struct platform_device spitzkbd_device = {
static struct platform_device spitz_mkp_device = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &spitzkbd_pdata,
.platform_data = &spitz_mkp_pdata,
},
};
static void __init spitz_mkp_init(void)
{
platform_device_register(&spitzkbd_device);
platform_device_register(&spitz_mkp_device);
}
#else
static inline void spitz_mkp_init(void) {}
......@@ -474,7 +470,7 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = {
.num_leds = ARRAY_SIZE(spitz_gpio_leds),
};
static struct platform_device spitzled_device = {
static struct platform_device spitz_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
......@@ -484,7 +480,7 @@ static struct platform_device spitzled_device = {
static void __init spitz_leds_init(void)
{
platform_device_register(&spitzled_device);
platform_device_register(&spitz_led_device);
}
#else
static inline void spitz_leds_init(void) {}
......@@ -494,7 +490,7 @@ static inline void spitz_leds_init(void) {}
* SSP Devices
******************************************************************************/
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static void spitz_wait_for_hsync(void)
static void spitz_ads7846_wait_for_hsync(void)
{
while (gpio_get_value(SPITZ_GPIO_HSYNC))
cpu_relax();
......@@ -510,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
.y_plate_ohms = 486,
.pressure_max = 1024,
.gpio_pendown = SPITZ_GPIO_TP_INT,
.wait_for_sync = spitz_wait_for_hsync,
.wait_for_sync = spitz_ads7846_wait_for_hsync,
};
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
......@@ -553,7 +549,7 @@ static struct spi_board_info spitz_spi_devices[] = {
.bus_num = 2,
.chip_select = 0,
.platform_data = &spitz_ads7846_info,
.controller_data= &spitz_ads7846_chip,
.controller_data = &spitz_ads7846_chip,
.irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
......@@ -561,13 +557,13 @@ static struct spi_board_info spitz_spi_devices[] = {
.bus_num = 2,
.chip_select = 1,
.platform_data = &spitz_lcdcon_info,
.controller_data= &spitz_lcdcon_chip,
.controller_data = &spitz_lcdcon_chip,
}, {
.modalias = "max1111",
.max_speed_hz = 450000,
.bus_num = 2,
.chip_select = 2,
.controller_data= &spitz_max1111_chip,
.controller_data = &spitz_max1111_chip,
},
};
......@@ -575,7 +571,7 @@ static struct pxa2xx_spi_master spitz_spi_info = {
.num_chipselect = 3,
};
static void __init spitz_init_spi(void)
static void __init spitz_spi_init(void)
{
struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
......@@ -588,7 +584,7 @@ static void __init spitz_init_spi(void)
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
}
#else
static inline void spitz_init_spi(void) {}
static inline void spitz_spi_init(void) {}
#endif
/******************************************************************************
......@@ -691,7 +687,7 @@ static inline void spitz_irda_init(void) {}
******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
{
.pixclock = 19231,
.xres = 480,
.yres = 640,
......@@ -703,7 +699,7 @@ static struct pxafb_mode_info spitz_pxafb_modes[] = {
.upper_margin = 1,
.lower_margin = 0,
.sync = 0,
},{
}, {
.pixclock = 134617,
.xres = 240,
.yres = 320,
......@@ -715,7 +711,7 @@ static struct pxafb_mode_info spitz_pxafb_modes[] = {
.upper_margin = 1,
.lower_margin = 0,
.sync = 0,
},
},
};
static struct pxafb_mach_info spitz_pxafb_info = {
......@@ -737,17 +733,15 @@ static inline void spitz_lcd_init(void) {}
* Framebuffer
******************************************************************************/
#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
static struct mtd_partition sharpsl_nand_partitions[] = {
static struct mtd_partition spitz_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
},
{
}, {
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
},
{
}, {
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
......@@ -756,14 +750,14 @@ static struct mtd_partition sharpsl_nand_partitions[] = {
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr sharpsl_bbt = {
static struct nand_bbt_descr spitz_nand_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct nand_ecclayout spitz_akita_oobinfo = {
static struct nand_ecclayout akita_oobinfo = {
.oobfree = { {0x08, 0x09} },
.eccbytes = 24,
.eccpos = {
......@@ -773,13 +767,13 @@ static struct nand_ecclayout spitz_akita_oobinfo = {
},
};
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
.badblock_pattern = &sharpsl_bbt,
.partitions = sharpsl_nand_partitions,
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
static struct sharpsl_nand_platform_data spitz_nand_pdata = {
.badblock_pattern = &spitz_nand_bbt,
.partitions = spitz_nand_partitions,
.nr_partitions = ARRAY_SIZE(spitz_nand_partitions),
};
static struct resource sharpsl_nand_resources[] = {
static struct resource spitz_nand_resources[] = {
{
.start = PXA_CS3_PHYS,
.end = PXA_CS3_PHYS + SZ_4K - 1,
......@@ -787,31 +781,31 @@ static struct resource sharpsl_nand_resources[] = {
},
};
static struct platform_device sharpsl_nand_device = {
static struct platform_device spitz_nand_device = {
.name = "sharpsl-nand",
.id = -1,
.resource = sharpsl_nand_resources,
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
.resource = spitz_nand_resources,
.num_resources = ARRAY_SIZE(spitz_nand_resources),
.dev = {
.platform_data = &sharpsl_nand_platform_data,
.platform_data = &spitz_nand_pdata,
}
};
static void __init spitz_nand_init(void)
{
if (machine_is_spitz()) {
sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
spitz_nand_partitions[1].size = 5 * 1024 * 1024;
} else if (machine_is_akita()) {
sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
sharpsl_nand_bbt.len = 1;
sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
spitz_nand_partitions[1].size = 58 * 1024 * 1024;
spitz_nand_bbt.len = 1;
spitz_nand_pdata.ecc_layout = &akita_oobinfo;
} else if (machine_is_borzoi()) {
sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
sharpsl_nand_bbt.len = 1;
sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
spitz_nand_partitions[1].size = 32 * 1024 * 1024;
spitz_nand_bbt.len = 1;
spitz_nand_pdata.ecc_layout = &akita_oobinfo;
}
platform_device_register(&sharpsl_nand_device);
platform_device_register(&spitz_nand_device);
}
#else
static inline void spitz_nand_init(void) {}
......@@ -821,7 +815,7 @@ static inline void spitz_nand_init(void) {}
* NOR Flash
******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition sharpsl_rom_parts[] = {
static struct mtd_partition spitz_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00140000,
......@@ -829,13 +823,13 @@ static struct mtd_partition sharpsl_rom_parts[] = {
},
};
static struct physmap_flash_data sharpsl_rom_data = {
static struct physmap_flash_data spitz_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
.nr_parts = ARRAY_SIZE(spitz_rom_parts),
.parts = spitz_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
static struct resource spitz_rom_resources[] = {
{
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_8M - 1,
......@@ -843,19 +837,19 @@ static struct resource sharpsl_rom_resources[] = {
},
};
static struct platform_device sharpsl_rom_device = {
static struct platform_device spitz_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.resource = spitz_rom_resources,
.num_resources = ARRAY_SIZE(spitz_rom_resources),
.dev = {
.platform_data = &sharpsl_rom_data,
.platform_data = &spitz_rom_data,
},
};
static void __init spitz_nor_init(void)
{
platform_device_register(&sharpsl_rom_device);
platform_device_register(&spitz_rom_device);
}
#else
static inline void spitz_nor_init(void) {}
......@@ -959,7 +953,7 @@ static void __init spitz_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
spitz_init_spi();
spitz_spi_init();
spitz_scoop_init();
spitz_mkp_init();
spitz_keys_init();
......@@ -974,7 +968,7 @@ static void __init spitz_init(void)
spitz_i2c_init();
}
static void __init fixup_spitz(struct machine_desc *desc,
static void __init spitz_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
......@@ -988,7 +982,7 @@ static void __init fixup_spitz(struct machine_desc *desc,
MACHINE_START(SPITZ, "SHARP Spitz")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
......@@ -1000,7 +994,7 @@ MACHINE_END
MACHINE_START(BORZOI, "SHARP Borzoi")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
......@@ -1012,7 +1006,7 @@ MACHINE_END
MACHINE_START(AKITA, "SHARP Akita")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment