clk: meson: g12a: add peripheral clock controller

Add the peripheral clock controller found in the g12a SoC family
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com

drivers/clk/meson/Kconfig

@@ -88,3 +88,15 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	depends on ARCH_MESON
+	select COMMON_CLK_MESON_INPUT
+	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_MPLL
+	select COMMON_CLK_MESON_PLL
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
+	  devices, aka g12a. Say Y if you want peripherals to work.

drivers/clk/meson/Makefile

@@ -15,4 +15,5 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
+obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o

drivers/clk/meson/clk-regmap.h

@@ -111,7 +111,7 @@ clk_get_regmap_mux_data(struct clk_regmap *clk)
 extern const struct clk_ops clk_regmap_mux_ops;
 extern const struct clk_ops clk_regmap_mux_ro_ops;
 
-#define MESON_GATE(_name, _reg, _bit)					\
+#define __MESON_GATE(_name, _reg, _bit, _ops)				\
 struct clk_regmap _name = {						\
 	.data = &(struct clk_regmap_gate_data){				\
 		.offset = (_reg),					\
@@ -119,11 +119,16 @@ struct clk_regmap _name = {						\
 	},								\
 	.hw.init = &(struct clk_init_data) {				\
 		.name = #_name,						\
-		.ops = &clk_regmap_gate_ops,				\
+		.ops = _ops,						\
 		.parent_names = (const char *[]){ "clk81" },		\
 		.num_parents = 1,					\
 		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
 	},								\
 }
 
+#define MESON_GATE(_name, _reg, _bit)	\
+	__MESON_GATE(_name, _reg, _bit, &clk_regmap_gate_ops)
+
+#define MESON_GATE_RO(_name, _reg, _bit)	\
+	__MESON_GATE(_name, _reg, _bit, &clk_regmap_gate_ro_ops)
 #endif /* __CLK_REGMAP_H */

drivers/clk/meson/g12a.h

+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12C
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_OTHER2			0x154
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1A0
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_FIX_PLL_CNTL3		0x2AC
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_HDMI_PLL_CNTL0		0x320
+#define HHI_HDMI_PLL_CNTL1		0x324
+#define HHI_HDMI_PLL_CNTL2		0x328
+#define HHI_HDMI_PLL_CNTL3		0x32c
+#define HHI_HDMI_PLL_CNTL4		0x330
+#define HHI_HDMI_PLL_CNTL5		0x334
+#define HHI_HDMI_PLL_CNTL6		0x338
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_A_CLK0_SEL		63
+#define CLKID_SD_EMMC_A_CLK0_DIV		64
+#define CLKID_SD_EMMC_B_CLK0_SEL		65
+#define CLKID_SD_EMMC_B_CLK0_DIV		66
+#define CLKID_SD_EMMC_C_CLK0_SEL		67
+#define CLKID_SD_EMMC_C_CLK0_DIV		68
+#define CLKID_MPLL0_DIV				69
+#define CLKID_MPLL1_DIV				70
+#define CLKID_MPLL2_DIV				71
+#define CLKID_MPLL3_DIV				72
+#define CLKID_MPLL_PREDIV			73
+#define CLKID_FCLK_DIV2_DIV			75
+#define CLKID_FCLK_DIV3_DIV			76
+#define CLKID_FCLK_DIV4_DIV			77
+#define CLKID_FCLK_DIV5_DIV			78
+#define CLKID_FCLK_DIV7_DIV			79
+#define CLKID_FCLK_DIV2P5_DIV			100
+#define CLKID_FIXED_PLL_DCO			101
+#define CLKID_SYS_PLL_DCO			102
+#define CLKID_GP0_PLL_DCO			103
+#define CLKID_HIFI_PLL_DCO			104
+#define CLKID_VPU_0_DIV				111
+#define CLKID_VPU_1_DIV				114
+#define CLKID_VAPB_0_DIV			118
+#define CLKID_VAPB_1_DIV			121
+#define CLKID_HDMI_PLL_DCO			125
+#define CLKID_HDMI_PLL_OD			126
+#define CLKID_HDMI_PLL_OD2			127
+#define CLKID_VID_PLL_SEL			130
+#define CLKID_VID_PLL_DIV			131
+#define CLKID_VCLK_SEL				132
+#define CLKID_VCLK2_SEL				133
+#define CLKID_VCLK_INPUT			134
+#define CLKID_VCLK2_INPUT			135
+#define CLKID_VCLK_DIV				136
+#define CLKID_VCLK2_DIV				137
+#define CLKID_VCLK_DIV2_EN			140
+#define CLKID_VCLK_DIV4_EN			141
+#define CLKID_VCLK_DIV6_EN			142
+#define CLKID_VCLK_DIV12_EN			143
+#define CLKID_VCLK2_DIV2_EN			144
+#define CLKID_VCLK2_DIV4_EN			145
+#define CLKID_VCLK2_DIV6_EN			146
+#define CLKID_VCLK2_DIV12_EN			147
+#define CLKID_CTS_ENCI_SEL			158
+#define CLKID_CTS_ENCP_SEL			159
+#define CLKID_CTS_VDAC_SEL			160
+#define CLKID_HDMI_TX_SEL			161
+#define CLKID_HDMI_SEL				166
+#define CLKID_HDMI_DIV				167
+#define CLKID_MALI_0_DIV			170
+#define CLKID_MALI_1_DIV			173
+#define CLKID_MPLL_5OM_DIV			176
+
+#define NR_CLKS					178
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */