Merge branch 'akpm' (Andrew's patch-bomb)

Merge misc patches from Andrew Morton:

 - the "misc" tree - stuff from all over the map

 - checkpatch updates

 - fatfs

 - kmod changes

 - procfs

 - cpumask

 - UML

 - kexec

 - mqueue

 - rapidio

 - pidns

 - some checkpoint-restore feature work.  Reluctantly.  Most of it
   delayed a release.  I'm still rather worried that we don't have a
   clear roadmap to completion for this work.

* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
  kconfig: update compression algorithm info
  c/r: prctl: add ability to set new mm_struct::exe_file
  c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
  c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
  syscalls, x86: add __NR_kcmp syscall
  fs, proc: introduce /proc/<pid>/task/<tid>/children entry
  sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
  aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
  eventfd: change int to __u64 in eventfd_signal()
  fs/nls: add Apple NLS
  pidns: make killed children autoreap
  pidns: use task_active_pid_ns in do_notify_parent
  rapidio/tsi721: add DMA engine support
  rapidio: add DMA engine support for RIO data transfers
  ipc/mqueue: add rbtree node caching support
  tools/selftests: add mq_perf_tests
  ipc/mqueue: strengthen checks on mqueue creation
  ipc/mqueue: correct mq_attr_ok test
  ipc/mqueue: improve performance of send/recv
  selftests: add mq_open_tests
  ...

.mailmap

@@ -113,3 +113,5 @@ Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
+Gustavo Padovan <gustavo@las.ic.unicamp.br>
+Gustavo Padovan <padovan@profusion.mobi>

Documentation/CodingStyle

@@ -671,8 +671,9 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
-the API documentation for further information about them.
+kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and
+vzalloc().  Please refer to the API documentation for further information
+about them.
 
 The preferred form for passing a size of a struct is the following:
 
@@ -686,6 +687,17 @@ Casting the return value which is a void pointer is redundant. The conversion
 from void pointer to any other pointer type is guaranteed by the C programming
 language.
 
+The preferred form for allocating an array is the following:
+
+	p = kmalloc_array(n, sizeof(...), ...);
+
+The preferred form for allocating a zeroed array is the following:
+
+	p = kcalloc(n, sizeof(...), ...);
+
+Both forms check for overflow on the allocation size n * sizeof(...),
+and return NULL if that occurred.
+
 
 		Chapter 15: The inline disease
 

Documentation/filesystems/proc.txt

@@ -40,6 +40,7 @@ Table of Contents
   3.4	/proc/<pid>/coredump_filter - Core dump filtering settings
   3.5	/proc/<pid>/mountinfo - Information about mounts
   3.6	/proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
+  3.7   /proc/<pid>/task/<tid>/children - Information about task children
 
   4	Configuring procfs
   4.1	Mount options
@@ -310,6 +311,11 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
   start_data    address above which program data+bss is placed
   end_data      address below which program data+bss is placed
   start_brk     address above which program heap can be expanded with brk()
+  arg_start     address above which program command line is placed
+  arg_end       address below which program command line is placed
+  env_start     address above which program environment is placed
+  env_end       address below which program environment is placed
+  exit_code     the thread's exit_code in the form reported by the waitpid system call
 ..............................................................................
 
 The /proc/PID/maps file containing the currently mapped memory regions and
@@ -1578,6 +1584,23 @@ then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
 comm value.
 
 
+3.7	/proc/<pid>/task/<tid>/children - Information about task children
+-------------------------------------------------------------------------
+This file provides a fast way to retrieve first level children pids
+of a task pointed by <pid>/<tid> pair. The format is a space separated
+stream of pids.
+
+Note the "first level" here -- if a child has own children they will
+not be listed here, one needs to read /proc/<children-pid>/task/<tid>/children
+to obtain the descendants.
+
+Since this interface is intended to be fast and cheap it doesn't
+guarantee to provide precise results and some children might be
+skipped, especially if they've exited right after we printed their
+pids, so one need to either stop or freeze processes being inspected
+if precise results are needed.
+
+
 ------------------------------------------------------------------------------
 Configuring procfs
 ------------------------------------------------------------------------------

Documentation/sysctl/fs.txt

@@ -225,6 +225,13 @@ a queue must be less or equal then msg_max.
 maximum  message size value (it is every  message queue's attribute set during
 its creation).
 
+/proc/sys/fs/mqueue/msg_default is  a read/write  file for setting/getting the
+default number of messages in a queue value if attr parameter of mq_open(2) is
+NULL. If it exceed msg_max, the default value is initialized msg_max.
+
+/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting
+the default message size value if attr parameter of mq_open(2) is NULL. If it
+exceed msgsize_max, the default value is initialized msgsize_max.
 
 4. /proc/sys/fs/epoll - Configuration options for the epoll interface
 --------------------------------------------------------

Documentation/vm/pagemap.txt

@@ -16,7 +16,7 @@ There are three components to pagemap:
     * Bits 0-4   swap type if swapped
     * Bits 5-54  swap offset if swapped
     * Bits 55-60 page shift (page size = 1<<page shift)
-    * Bit  61    reserved for future use
+    * Bit  61    page is file-page or shared-anon
     * Bit  62    page swapped
     * Bit  63    page present
 

arch/arm/kernel/smp.c

@@ -109,7 +109,6 @@ static void percpu_timer_stop(void);
 int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
-	struct task_struct *p;
 	int ret;
 
 	ret = platform_cpu_disable(cpu);
@@ -139,12 +138,7 @@ int __cpu_disable(void)
 	flush_cache_all();
 	local_flush_tlb_all();
 
-	read_lock(&tasklist_lock);
-	for_each_process(p) {
-		if (p->mm)
-			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
-	}
-	read_unlock(&tasklist_lock);
+	clear_tasks_mm_cpumask(cpu);
 
 	return 0;
 }

arch/blackfin/kernel/trace.c

@@ -10,6 +10,8 @@
 #include <linux/hardirq.h>
 #include <linux/thread_info.h>
 #include <linux/mm.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
@@ -27,8 +29,7 @@ void decode_address(char *buf, unsigned long address)
 {
 	struct task_struct *p;
 	struct mm_struct *mm;
-	unsigned long flags, offset;
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+	unsigned long offset;
 	struct rb_node *n;
 
 #ifdef CONFIG_KALLSYMS
@@ -112,17 +113,17 @@ void decode_address(char *buf, unsigned long address)
 	 * mappings of all our processes and see if we can't be a whee
 	 * bit more specific
 	 */
-	write_lock_irqsave(&tasklist_lock, flags);
+	read_lock(&tasklist_lock);
 	for_each_process(p) {
-		mm = (in_atomic ? p->mm : get_task_mm(p));
-		if (!mm)
-			continue;
+		struct task_struct *t;
 
-		if (!down_read_trylock(&mm->mmap_sem)) {
-			if (!in_atomic)
-				mmput(mm);
+		t = find_lock_task_mm(p);
+		if (!t)
 			continue;
-		}
+
+		mm = t->mm;
+		if (!down_read_trylock(&mm->mmap_sem))
+			goto __continue;
 
 		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
 			struct vm_area_struct *vma;
@@ -131,7 +132,7 @@ void decode_address(char *buf, unsigned long address)
 
 			if (address >= vma->vm_start && address < vma->vm_end) {
 				char _tmpbuf[256];
-				char *name = p->comm;
+				char *name = t->comm;
 				struct file *file = vma->vm_file;
 
 				if (file) {
@@ -164,8 +165,7 @@ void decode_address(char *buf, unsigned long address)
 						name, vma->vm_start, vma->vm_end);
 
 				up_read(&mm->mmap_sem);
-				if (!in_atomic)
-					mmput(mm);
+				task_unlock(t);
 
 				if (buf[0] == '\0')
 					sprintf(buf, "[ %s ] dynamic memory", name);
@@ -175,8 +175,8 @@ void decode_address(char *buf, unsigned long address)
 		}
 
 		up_read(&mm->mmap_sem);
-		if (!in_atomic)
-			mmput(mm);
+__continue:
+		task_unlock(t);
 	}
 
 	/*
@@ -186,7 +186,7 @@ void decode_address(char *buf, unsigned long address)
 	sprintf(buf, "/* kernel dynamic memory */");
 
 done:
-	write_unlock_irqrestore(&tasklist_lock, flags);
+	read_unlock(&tasklist_lock);
 }
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)

arch/powerpc/mm/mmu_context_nohash.c

@@ -333,9 +333,7 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 					    unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
-#ifdef CONFIG_HOTPLUG_CPU
-	struct task_struct *p;
-#endif
+
 	/* We don't touch CPU 0 map, it's allocated at aboot and kept
 	 * around forever
 	 */
@@ -358,12 +356,7 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 		stale_map[cpu] = NULL;
 
 		/* We also clear the cpu_vm_mask bits of CPUs going away */
-		read_lock(&tasklist_lock);
-		for_each_process(p) {
-			if (p->mm)
-				cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
-		}
-		read_unlock(&tasklist_lock);
+		clear_tasks_mm_cpumask(cpu);
 	break;
 #endif /* CONFIG_HOTPLUG_CPU */
 	}

arch/sh/kernel/smp.c

@@ -123,7 +123,6 @@ void native_play_dead(void)
 int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
-	struct task_struct *p;
 	int ret;
 
 	ret = mp_ops->cpu_disable(cpu);
@@ -153,11 +152,7 @@ int __cpu_disable(void)
 	flush_cache_all();
 	local_flush_tlb_all();
 
-	read_lock(&tasklist_lock);
-	for_each_process(p)
-		if (p->mm)
-			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
-	read_unlock(&tasklist_lock);
+	clear_tasks_mm_cpumask(cpu);
 
 	return 0;
 }

arch/um/kernel/reboot.c

@@ -4,7 +4,9 @@
  */
 
 #include "linux/sched.h"
+#include "linux/spinlock.h"
 #include "linux/slab.h"
+#include "linux/oom.h"
 #include "kern_util.h"
 #include "os.h"
 #include "skas.h"
@@ -22,13 +24,18 @@ static void kill_off_processes(void)
 		struct task_struct *p;
 		int pid;
 
+		read_lock(&tasklist_lock);
 		for_each_process(p) {
-			if (p->mm == NULL)
-				continue;
+			struct task_struct *t;
 
-			pid = p->mm->context.id.u.pid;
+			t = find_lock_task_mm(p);
+			if (!t)
+				continue;
+			pid = t->mm->context.id.u.pid;
+			task_unlock(t);
 			os_kill_ptraced_process(pid, 1);
 		}
+		read_unlock(&tasklist_lock);
 	}
 }
 

arch/um/kernel/trap.c

@@ -30,6 +30,8 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	pmd_t *pmd;
 	pte_t *pte;
 	int err = -EFAULT;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+				 (is_write ? FAULT_FLAG_WRITE : 0);
 
 	*code_out = SEGV_MAPERR;
 
@@ -40,6 +42,7 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	if (in_atomic())
 		goto out_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -65,7 +68,11 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	do {
 		int fault;
 
-		fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
+		fault = handle_mm_fault(mm, vma, address, flags);
+
+		if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+			goto out_nosemaphore;
+
 		if (unlikely(fault & VM_FAULT_ERROR)) {
 			if (fault & VM_FAULT_OOM) {
 				goto out_of_memory;
@@ -75,10 +82,17 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 			}
 			BUG();
 		}
+		if (flags & FAULT_FLAG_ALLOW_RETRY) {
 			if (fault & VM_FAULT_MAJOR)
 				current->maj_flt++;
 			else
 				current->min_flt++;
+			if (fault & VM_FAULT_RETRY) {
+				flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+				goto retry;
+			}
+		}
 
 		pgd = pgd_offset(mm, address);
 		pud = pud_offset(pgd, address);

arch/x86/syscalls/syscall_32.tbl

@@ -355,3 +355,4 @@
 346	i386	setns			sys_setns
 347	i386	process_vm_readv	sys_process_vm_readv		compat_sys_process_vm_readv
 348	i386	process_vm_writev	sys_process_vm_writev		compat_sys_process_vm_writev
+349	i386	kcmp			sys_kcmp

arch/x86/syscalls/syscall_64.tbl

@@ -318,6 +318,8 @@
 309	common	getcpu			sys_getcpu
 310	64	process_vm_readv	sys_process_vm_readv
 311	64	process_vm_writev	sys_process_vm_writev
+312	64	kcmp			sys_kcmp
+
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
 # for native 64-bit operation.

drivers/message/fusion/mptbase.c

@@ -1653,7 +1653,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	unsigned long	 port;
 	u32		 msize;
 	u32		 psize;
-	u8		 revision;
 	int		 r = -ENODEV;
 	struct pci_dev *pdev;
 
@@ -1670,8 +1669,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 		return r;
 	}
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-
 	if (sizeof(dma_addr_t) > 4) {
 		const uint64_t required_mask = dma_get_required_mask
 		    (&pdev->dev);
@@ -1779,7 +1776,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	MPT_ADAPTER	*ioc;
 	u8		 cb_idx;
 	int		 r = -ENODEV;
-	u8		 revision;
 	u8		 pcixcmd;
 	static int	 mpt_ids = 0;
 #ifdef CONFIG_PROC_FS
@@ -1887,8 +1883,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
 	    ioc->name, &ioc->facts, &ioc->pfacts[0]));
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
+	mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision,
+			     ioc->prod_name);
 
 	switch (pdev->device)
 	{
@@ -1903,7 +1899,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		break;
 
 	case MPI_MANUFACTPAGE_DEVICEID_FC929X:
-		if (revision < XL_929) {
+		if (pdev->revision < XL_929) {
 			/* 929X Chip Fix. Set Split transactions level
 		 	* for PCIX. Set MOST bits to zero.
 		 	*/
@@ -1934,7 +1930,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		/* 1030 Chip Fix. Disable Split transactions
 		 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
 		 */
-		if (revision < C0_1030) {
+		if (pdev->revision < C0_1030) {
 			pci_read_config_byte(pdev, 0x6a, &pcixcmd);
 			pcixcmd &= 0x8F;
 			pci_write_config_byte(pdev, 0x6a, pcixcmd);

drivers/message/fusion/mptctl.c

@@ -1250,7 +1250,6 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
 	int			iocnum;
 	unsigned int		port;
 	int			cim_rev;
-	u8			revision;
 	struct scsi_device 	*sdev;
 	VirtDevice		*vdevice;
 
@@ -1324,8 +1323,7 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
 	pdev = (struct pci_dev *) ioc->pcidev;
 
 	karg->pciId = pdev->device;
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	karg->hwRev = revision;
+	karg->hwRev = pdev->revision;
 	karg->subSystemDevice = pdev->subsystem_device;
 	karg->subSystemVendor = pdev->subsystem_vendor;
 

drivers/rapidio/Kconfig

@@ -22,6 +22,20 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
 	  ports for Input/Output direction to allow other traffic
 	  than Maintenance transfers.
 
+config RAPIDIO_DMA_ENGINE
+	bool "DMA Engine support for RapidIO"
+	depends on RAPIDIO
+	select DMADEVICES
+	select DMA_ENGINE
+	help
+	  Say Y here if you want to use DMA Engine frameork for RapidIO data
+	  transfers to/from target RIO devices. RapidIO uses NREAD and
+	  NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
+	  memory and memory on remote target device. You need a DMA controller
+	  capable to perform data transfers to/from RapidIO.
+
+	  If you are unsure about this, say Y here.
+
 config RAPIDIO_DEBUG
 	bool "RapidIO subsystem debug messages"
 	depends on RAPIDIO

drivers/rapidio/devices/Makefile

@@ -3,3 +3,6 @@
 #
 
 obj-$(CONFIG_RAPIDIO_TSI721)	+= tsi721.o
+ifeq ($(CONFIG_RAPIDIO_DMA_ENGINE),y)
+obj-$(CONFIG_RAPIDIO_TSI721)	+= tsi721_dma.o
+endif

drivers/rapidio/devices/tsi721.h

@@ -167,6 +167,8 @@
 #define TSI721_DEV_INTE		0x29840
 #define TSI721_DEV_INT		0x29844
 #define TSI721_DEV_INTSET	0x29848
+#define TSI721_DEV_INT_BDMA_CH	0x00002000
+#define TSI721_DEV_INT_BDMA_NCH	0x00001000
 #define TSI721_DEV_INT_SMSG_CH	0x00000800
 #define TSI721_DEV_INT_SMSG_NCH	0x00000400
 #define TSI721_DEV_INT_SR2PC_CH	0x00000200
@@ -181,6 +183,8 @@
 #define TSI721_INT_IMSG_CHAN(x)	(1 << (16 + (x)))
 #define TSI721_INT_OMSG_CHAN_M	0x0000ff00
 #define TSI721_INT_OMSG_CHAN(x)	(1 << (8 + (x)))
+#define TSI721_INT_BDMA_CHAN_M	0x000000ff
+#define TSI721_INT_BDMA_CHAN(x)	(1 << (x))
 
 /*
  * PC2SR block registers
@@ -235,14 +239,16 @@
  *   x = 0..7
  */
 
-#define TSI721_DMAC_DWRCNT(x)	(0x51000 + (x) * 0x1000)
-#define TSI721_DMAC_DRDCNT(x)	(0x51004 + (x) * 0x1000)
+#define TSI721_DMAC_BASE(x)	(0x51000 + (x) * 0x1000)
 
-#define TSI721_DMAC_CTL(x)	(0x51008 + (x) * 0x1000)
+#define TSI721_DMAC_DWRCNT	0x000
+#define TSI721_DMAC_DRDCNT	0x004
+
+#define TSI721_DMAC_CTL		0x008
 #define TSI721_DMAC_CTL_SUSP	0x00000002
 #define TSI721_DMAC_CTL_INIT	0x00000001
 
-#define TSI721_DMAC_INT(x)	(0x5100c + (x) * 0x1000)
+#define TSI721_DMAC_INT		0x00c
 #define TSI721_DMAC_INT_STFULL	0x00000010
 #define TSI721_DMAC_INT_DONE	0x00000008
 #define TSI721_DMAC_INT_SUSP	0x00000004
@@ -250,34 +256,33 @@
 #define TSI721_DMAC_INT_IOFDONE	0x00000001
 #define TSI721_DMAC_INT_ALL	0x0000001f
 
-#define TSI721_DMAC_INTSET(x)	(0x51010 + (x) * 0x1000)
+#define TSI721_DMAC_INTSET	0x010
 
-#define TSI721_DMAC_STS(x)	(0x51014 + (x) * 0x1000)
+#define TSI721_DMAC_STS		0x014
 #define TSI721_DMAC_STS_ABORT	0x00400000
 #define TSI721_DMAC_STS_RUN	0x00200000
 #define TSI721_DMAC_STS_CS	0x001f0000
 
-#define TSI721_DMAC_INTE(x)	(0x51018 + (x) * 0x1000)
+#define TSI721_DMAC_INTE	0x018
 
-#define TSI721_DMAC_DPTRL(x)	(0x51024 + (x) * 0x1000)
+#define TSI721_DMAC_DPTRL	0x024
 #define TSI721_DMAC_DPTRL_MASK	0xffffffe0
 
-#define TSI721_DMAC_DPTRH(x)	(0x51028 + (x) * 0x1000)
+#define TSI721_DMAC_DPTRH	0x028
 
-#define TSI721_DMAC_DSBL(x)	(0x5102c + (x) * 0x1000)
+#define TSI721_DMAC_DSBL	0x02c
 #define TSI721_DMAC_DSBL_MASK	0xffffffc0
 
-#define TSI721_DMAC_DSBH(x)	(0x51030 + (x) * 0x1000)
+#define TSI721_DMAC_DSBH	0x030
 
-#define TSI721_DMAC_DSSZ(x)	(0x51034 + (x) * 0x1000)
+#define TSI721_DMAC_DSSZ	0x034
 #define TSI721_DMAC_DSSZ_SIZE_M	0x0000000f
 #define TSI721_DMAC_DSSZ_SIZE(size)	(__fls(size) - 4)
 
-
-#define TSI721_DMAC_DSRP(x)	(0x51038 + (x) * 0x1000)
+#define TSI721_DMAC_DSRP	0x038
 #define TSI721_DMAC_DSRP_MASK	0x0007ffff
 
-#define TSI721_DMAC_DSWP(x)	(0x5103c + (x) * 0x1000)
+#define TSI721_DMAC_DSWP	0x03c
 #define TSI721_DMAC_DSWP_MASK	0x0007ffff
 
 #define TSI721_BDMA_INTE	0x5f000
@@ -612,6 +617,8 @@ enum dma_rtype {
 #define TSI721_DMACH_MAINT	0	/* DMA channel for maint requests */
 #define TSI721_DMACH_MAINT_NBD	32	/* Number of BDs for maint requests */
 
+#define TSI721_DMACH_DMA	1	/* DMA channel for data transfers */
+
 #define MSG_DMA_ENTRY_INX_TO_SIZE(x)	((0x10 << (x)) & 0xFFFF0)
 
 enum tsi721_smsg_int_flag {
@@ -626,7 +633,48 @@ enum tsi721_smsg_int_flag {
 
 /* Structures */
 
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+struct tsi721_tx_desc {
+	struct dma_async_tx_descriptor	txd;
+	struct tsi721_dma_desc		*hw_desc;
+	u16				destid;
+	/* low 64-bits of 66-bit RIO address */
+	u64				rio_addr;
+	/* upper 2-bits of 66-bit RIO address */
+	u8				rio_addr_u;
+	bool				interrupt;
+	struct list_head		desc_node;
+	struct list_head		tx_list;
+};
+
 struct tsi721_bdma_chan {
+	int		id;
+	void __iomem	*regs;
+	int		bd_num;		/* number of buffer descriptors */
+	void		*bd_base;	/* start of DMA descriptors */
+	dma_addr_t	bd_phys;
+	void		*sts_base;	/* start of DMA BD status FIFO */
+	dma_addr_t	sts_phys;
+	int		sts_size;
+	u32		sts_rdptr;
+	u32		wr_count;
+	u32		wr_count_next;
+
+	struct dma_chan		dchan;
+	struct tsi721_tx_desc	*tx_desc;
+	spinlock_t		lock;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	dma_cookie_t		completed_cookie;
+	struct tasklet_struct	tasklet;
+};
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+struct tsi721_bdma_maint {
+	int		ch_id;		/* BDMA channel number */
 	int		bd_num;		/* number of buffer descriptors */
 	void		*bd_base;	/* start of DMA descriptors */
 	dma_addr_t	bd_phys;
@@ -721,6 +769,24 @@ enum tsi721_msix_vect {
 	TSI721_VECT_IMB1_INT,
 	TSI721_VECT_IMB2_INT,
 	TSI721_VECT_IMB3_INT,
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+	TSI721_VECT_DMA0_DONE,
+	TSI721_VECT_DMA1_DONE,
+	TSI721_VECT_DMA2_DONE,
+	TSI721_VECT_DMA3_DONE,
+	TSI721_VECT_DMA4_DONE,
+	TSI721_VECT_DMA5_DONE,
+	TSI721_VECT_DMA6_DONE,
+	TSI721_VECT_DMA7_DONE,
+	TSI721_VECT_DMA0_INT,
+	TSI721_VECT_DMA1_INT,
+	TSI721_VECT_DMA2_INT,
+	TSI721_VECT_DMA3_INT,
+	TSI721_VECT_DMA4_INT,
+	TSI721_VECT_DMA5_INT,
+	TSI721_VECT_DMA6_INT,
+	TSI721_VECT_DMA7_INT,
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 	TSI721_VECT_MAX
 };
 
@@ -754,7 +820,11 @@ struct tsi721_device {
 	u32		pw_discard_count;
 
 	/* BDMA Engine */
+	struct tsi721_bdma_maint mdma; /* Maintenance rd/wr request channel */
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
 	struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM];
+#endif
 
 	/* Inbound Messaging */
 	int		imsg_init[TSI721_IMSG_CHNUM];
@@ -765,4 +835,9 @@ struct tsi721_device {
 	struct tsi721_omsg_ring	omsg_ring[TSI721_OMSG_CHNUM];
 };
 
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+extern void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan);
+extern int __devinit tsi721_register_dma(struct tsi721_device *priv);
+#endif
+
 #endif

drivers/rapidio/rio.c

@@ -1121,6 +1121,87 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
 	return 0;
 }
 
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+	struct rio_dev *rdev = arg;
+
+	/* Check that DMA device belongs to the right MPORT */
+	return (rdev->net->hport ==
+		container_of(chan->device, struct rio_mport, dma));
+}
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ *   specified target RapidIO device.
+ * @rdev: RIO device control structure
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+	dma_cap_mask_t mask;
+	struct dma_chan *dchan;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dchan = dma_request_channel(mask, rio_chan_filter, rdev);
+
+	return dchan;
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+	dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ *   for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+	struct dma_chan *dchan, struct rio_dma_data *data,
+	enum dma_transfer_direction direction, unsigned long flags)
+{
+	struct dma_async_tx_descriptor *txd = NULL;
+	struct rio_dma_ext rio_ext;
+
+	if (dchan->device->device_prep_slave_sg == NULL) {
+		pr_err("%s: prep_rio_sg == NULL\n", __func__);
+		return NULL;
+	}
+
+	rio_ext.destid = rdev->destid;
+	rio_ext.rio_addr_u = data->rio_addr_u;
+	rio_ext.rio_addr = data->rio_addr;
+	rio_ext.wr_type = data->wr_type;
+
+	txd = dmaengine_prep_rio_sg(dchan, data->sg, data->sg_len,
+					direction, flags, &rio_ext);
+
+	return txd;
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
 static void rio_fixup_device(struct rio_dev *dev)
 {
 }

fs/aio.c

@@ -1446,13 +1446,13 @@ static ssize_t aio_setup_vectored_rw(int type, struct kiocb *kiocb, bool compat)
 		ret = compat_rw_copy_check_uvector(type,
 				(struct compat_iovec __user *)kiocb->ki_buf,
 				kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
-				&kiocb->ki_iovec, 1);
+				&kiocb->ki_iovec);
 	else
 #endif
 		ret = rw_copy_check_uvector(type,
 				(struct iovec __user *)kiocb->ki_buf,
 				kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
-				&kiocb->ki_iovec, 1);
+				&kiocb->ki_iovec);
 	if (ret < 0)
 		goto out;
 

fs/ceph/snap.c

@@ -331,7 +331,7 @@ static int build_snap_context(struct ceph_snap_realm *realm)
 
 	/* alloc new snap context */
 	err = -ENOMEM;
-	if (num > (ULONG_MAX - sizeof(*snapc)) / sizeof(u64))
+	if (num > (SIZE_MAX - sizeof(*snapc)) / sizeof(u64))
 		goto fail;
 	snapc = kzalloc(sizeof(*snapc) + num*sizeof(u64), GFP_NOFS);
 	if (!snapc)

fs/compat.c

@@ -532,7 +532,7 @@ compat_sys_io_getevents(aio_context_t ctx_id,
 ssize_t compat_rw_copy_check_uvector(int type,
 		const struct compat_iovec __user *uvector, unsigned long nr_segs,
 		unsigned long fast_segs, struct iovec *fast_pointer,
-		struct iovec **ret_pointer, int check_access)
+		struct iovec **ret_pointer)
 {
 	compat_ssize_t tot_len;
 	struct iovec *iov = *ret_pointer = fast_pointer;
@@ -579,7 +579,7 @@ ssize_t compat_rw_copy_check_uvector(int type,
 		}
 		if (len < 0)	/* size_t not fitting in compat_ssize_t .. */
 			goto out;
-		if (check_access &&
+		if (type >= 0 &&
 		    !access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
 			ret = -EFAULT;
 			goto out;
@@ -1094,7 +1094,7 @@ static ssize_t compat_do_readv_writev(int type, struct file *file,
 		goto out;
 
 	tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
-					       UIO_FASTIOV, iovstack, &iov, 1);
+					       UIO_FASTIOV, iovstack, &iov);
 	if (tot_len == 0) {
 		ret = 0;
 		goto out;

fs/eventfd.c

@@ -46,20 +46,16 @@ struct eventfd_ctx {
  * value, and we signal this as overflow condition by returining a POLLERR
  * to poll(2).
  *
- * Returns @n in case of success, a non-negative number lower than @n in case
- * of overflow, or the following error codes:
- *
- * -EINVAL    : The value of @n is negative.
+ * Returns the amount by which the counter was incrememnted.  This will be less
+ * than @n if the counter has overflowed.
  */
-int eventfd_signal(struct eventfd_ctx *ctx, int n)
+__u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n)
 {
 	unsigned long flags;
 
-	if (n < 0)
-		return -EINVAL;
 	spin_lock_irqsave(&ctx->wqh.lock, flags);
 	if (ULLONG_MAX - ctx->count < n)
-		n = (int) (ULLONG_MAX - ctx->count);
+		n = ULLONG_MAX - ctx->count;
 	ctx->count += n;
 	if (waitqueue_active(&ctx->wqh))
 		wake_up_locked_poll(&ctx->wqh, POLLIN);

fs/fat/dir.c

@@ -98,8 +98,8 @@ static int fat__get_entry(struct inode *dir, loff_t *pos,
 
 	*bh = sb_bread(sb, phys);
 	if (*bh == NULL) {
-		fat_msg(sb, KERN_ERR, "Directory bread(block %llu) failed",
-		       (llu)phys);
+		fat_msg_ratelimit(sb, KERN_ERR,
+			"Directory bread(block %llu) failed", (llu)phys);
 		/* skip this block */
 		*pos = (iblock + 1) << sb->s_blocksize_bits;
 		goto next;

fs/fat/fat.h

@@ -82,6 +82,7 @@ struct msdos_sb_info {
 	int fatent_shift;
 	struct fatent_operations *fatent_ops;
 	struct inode *fat_inode;
+	struct inode *fsinfo_inode;
 
 	struct ratelimit_state ratelimit;
 
@@ -334,6 +335,11 @@ void __fat_fs_error(struct super_block *sb, int report, const char *fmt, ...);
 	__fat_fs_error(sb, __ratelimit(&MSDOS_SB(sb)->ratelimit), fmt , ## args)
 __printf(3, 4) __cold
 void fat_msg(struct super_block *sb, const char *level, const char *fmt, ...);
+#define fat_msg_ratelimit(sb, level, fmt, args...)	\
+	do {	\
+			if (__ratelimit(&MSDOS_SB(sb)->ratelimit))	\
+				fat_msg(sb, level, fmt, ## args);	\
+	 } while (0)
 extern int fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
 extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,

fs/fat/fatent.c

@@ -308,6 +308,16 @@ void fat_ent_access_init(struct super_block *sb)
 	}
 }
 
+static void mark_fsinfo_dirty(struct super_block *sb)
+{
+	struct msdos_sb_info *sbi = MSDOS_SB(sb);
+
+	if (sb->s_flags & MS_RDONLY || sbi->fat_bits != 32)
+		return;
+
+	__mark_inode_dirty(sbi->fsinfo_inode, I_DIRTY_SYNC);
+}
+
 static inline int fat_ent_update_ptr(struct super_block *sb,
 				     struct fat_entry *fatent,
 				     int offset, sector_t blocknr)
@@ -498,7 +508,6 @@ int fat_alloc_clusters(struct inode *inode, int *cluster, int nr_cluster)
 				sbi->prev_free = entry;
 				if (sbi->free_clusters != -1)
 					sbi->free_clusters--;
-				sb->s_dirt = 1;
 
 				cluster[idx_clus] = entry;
 				idx_clus++;
@@ -520,11 +529,11 @@ int fat_alloc_clusters(struct inode *inode, int *cluster, int nr_cluster)
 	/* Couldn't allocate the free entries */
 	sbi->free_clusters = 0;
 	sbi->free_clus_valid = 1;
-	sb->s_dirt = 1;
 	err = -ENOSPC;
 
 out:
 	unlock_fat(sbi);
+	mark_fsinfo_dirty(sb);
 	fatent_brelse(&fatent);
 	if (!err) {
 		if (inode_needs_sync(inode))
@@ -549,7 +558,7 @@ int fat_free_clusters(struct inode *inode, int cluster)
 	struct fat_entry fatent;
 	struct buffer_head *bhs[MAX_BUF_PER_PAGE];
 	int i, err, nr_bhs;
-	int first_cl = cluster;
+	int first_cl = cluster, dirty_fsinfo = 0;
 
 	nr_bhs = 0;
 	fatent_init(&fatent);
@@ -587,7 +596,7 @@ int fat_free_clusters(struct inode *inode, int cluster)
 		ops->ent_put(&fatent, FAT_ENT_FREE);
 		if (sbi->free_clusters != -1) {
 			sbi->free_clusters++;
-			sb->s_dirt = 1;
+			dirty_fsinfo = 1;
 		}
 
 		if (nr_bhs + fatent.nr_bhs > MAX_BUF_PER_PAGE) {
@@ -617,6 +626,8 @@ int fat_free_clusters(struct inode *inode, int cluster)
 	for (i = 0; i < nr_bhs; i++)
 		brelse(bhs[i]);
 	unlock_fat(sbi);
+	if (dirty_fsinfo)
+		mark_fsinfo_dirty(sb);
 
 	return err;
 }
@@ -677,7 +688,7 @@ int fat_count_free_clusters(struct super_block *sb)
 	}
 	sbi->free_clusters = free;
 	sbi->free_clus_valid = 1;
-	sb->s_dirt = 1;
+	mark_fsinfo_dirty(sb);
 	fatent_brelse(&fatent);
 out:
 	unlock_fat(sbi);

fs/fat/inode.c

@@ -459,37 +459,11 @@ static void fat_evict_inode(struct inode *inode)
 	fat_detach(inode);
 }
 
-static void fat_write_super(struct super_block *sb)
-{
-	lock_super(sb);
-	sb->s_dirt = 0;
-
-	if (!(sb->s_flags & MS_RDONLY))
-		fat_clusters_flush(sb);
-	unlock_super(sb);
-}
-
-static int fat_sync_fs(struct super_block *sb, int wait)
-{
-	int err = 0;
-
-	if (sb->s_dirt) {
-		lock_super(sb);
-		sb->s_dirt = 0;
-		err = fat_clusters_flush(sb);
-		unlock_super(sb);
-	}
-
-	return err;
-}
-
 static void fat_put_super(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 
-	if (sb->s_dirt)
-		fat_write_super(sb);
-
+	iput(sbi->fsinfo_inode);
 	iput(sbi->fat_inode);
 
 	unload_nls(sbi->nls_disk);
@@ -661,7 +635,18 @@ static int __fat_write_inode(struct inode *inode, int wait)
 
 static int fat_write_inode(struct inode *inode, struct writeback_control *wbc)
 {
-	return __fat_write_inode(inode, wbc->sync_mode == WB_SYNC_ALL);
+	int err;
+
+	if (inode->i_ino == MSDOS_FSINFO_INO) {
+		struct super_block *sb = inode->i_sb;
+
+		lock_super(sb);
+		err = fat_clusters_flush(sb);
+		unlock_super(sb);
+	} else
+		err = __fat_write_inode(inode, wbc->sync_mode == WB_SYNC_ALL);
+
+	return err;
 }
 
 int fat_sync_inode(struct inode *inode)
@@ -678,8 +663,6 @@ static const struct super_operations fat_sops = {
 	.write_inode	= fat_write_inode,
 	.evict_inode	= fat_evict_inode,
 	.put_super	= fat_put_super,
-	.write_super	= fat_write_super,
-	.sync_fs	= fat_sync_fs,
 	.statfs		= fat_statfs,
 	.remount_fs	= fat_remount,
 
@@ -1244,6 +1227,7 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat,
 		   void (*setup)(struct super_block *))
 {
 	struct inode *root_inode = NULL, *fat_inode = NULL;
+	struct inode *fsinfo_inode = NULL;
 	struct buffer_head *bh;
 	struct fat_boot_sector *b;
 	struct msdos_sb_info *sbi;
@@ -1490,6 +1474,14 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat,
 		goto out_fail;
 	MSDOS_I(fat_inode)->i_pos = 0;
 	sbi->fat_inode = fat_inode;
+
+	fsinfo_inode = new_inode(sb);
+	if (!fsinfo_inode)
+		goto out_fail;
+	fsinfo_inode->i_ino = MSDOS_FSINFO_INO;
+	sbi->fsinfo_inode = fsinfo_inode;
+	insert_inode_hash(fsinfo_inode);
+
 	root_inode = new_inode(sb);
 	if (!root_inode)
 		goto out_fail;
@@ -1516,6 +1508,8 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat,
 		fat_msg(sb, KERN_INFO, "Can't find a valid FAT filesystem");
 
 out_fail:
+	if (fsinfo_inode)
+		iput(fsinfo_inode);
 	if (fat_inode)
 		iput(fat_inode);
 	unload_nls(sbi->nls_io);

fs/hpfs/buffer.c

@@ -156,7 +156,6 @@ void hpfs_brelse4(struct quad_buffer_head *qbh)
 
 void hpfs_mark_4buffers_dirty(struct quad_buffer_head *qbh)
 {
-	PRINTK(("hpfs_mark_4buffers_dirty\n"));
 	memcpy(qbh->bh[0]->b_data, qbh->data, 512);
 	memcpy(qbh->bh[1]->b_data, qbh->data + 512, 512);
 	memcpy(qbh->bh[2]->b_data, qbh->data + 2 * 512, 512);

fs/hpfs/hpfs_fn.h

@@ -35,13 +35,6 @@
 
 #define CHKCOND(x,y) if (!(x)) printk y
 
-#ifdef DBG
-#define PRINTK(x) printk x
-#else
-#undef PRINTK
-#define PRINTK(x)
-#endif
-
 struct hpfs_inode_info {
 	loff_t mmu_private;
 	ino_t i_parent_dir;	/* (directories) gives fnode of parent dir */

fs/nilfs2/file.c

@@ -37,6 +37,7 @@ int nilfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 	 * This function should be implemented when the writeback function
 	 * will be implemented.
 	 */
+	struct the_nilfs *nilfs;
 	struct inode *inode = file->f_mapping->host;
 	int err;
 
@@ -45,18 +46,21 @@ int nilfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		return err;
 	mutex_lock(&inode->i_mutex);
 
-	if (!nilfs_inode_dirty(inode)) {
-		mutex_unlock(&inode->i_mutex);
-		return 0;
-	}
-
+	if (nilfs_inode_dirty(inode)) {
 		if (datasync)
-		err = nilfs_construct_dsync_segment(inode->i_sb, inode, 0,
-						    LLONG_MAX);
+			err = nilfs_construct_dsync_segment(inode->i_sb, inode,
+							    0, LLONG_MAX);
 		else
 			err = nilfs_construct_segment(inode->i_sb);
-
+	}
 	mutex_unlock(&inode->i_mutex);
+
+	nilfs = inode->i_sb->s_fs_info;
+	if (!err && nilfs_test_opt(nilfs, BARRIER)) {
+		err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
+		if (err != -EIO)
+			err = 0;
+	}
 	return err;
 }
 

fs/nilfs2/ioctl.c

@@ -692,8 +692,14 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
 	if (ret < 0)
 		return ret;
 
-	if (argp != NULL) {
 	nilfs = inode->i_sb->s_fs_info;
+	if (nilfs_test_opt(nilfs, BARRIER)) {
+		ret = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
+		if (ret == -EIO)
+			return ret;
+	}
+
+	if (argp != NULL) {
 		down_read(&nilfs->ns_segctor_sem);
 		cno = nilfs->ns_cno - 1;
 		up_read(&nilfs->ns_segctor_sem);

fs/nls/Kconfig

@@ -30,7 +30,7 @@ config NLS_DEFAULT
 	  cp949, cp950, cp1251, cp1255, euc-jp, euc-kr, gb2312, iso8859-1,
 	  iso8859-2, iso8859-3, iso8859-4, iso8859-5, iso8859-6, iso8859-7,
 	  iso8859-8, iso8859-9, iso8859-13, iso8859-14, iso8859-15,
-	  koi8-r, koi8-ru, koi8-u, sjis, tis-620, utf8.
+	  koi8-r, koi8-ru, koi8-u, sjis, tis-620, macroman, utf8.
 	  If you specify a wrong value, it will use the built-in NLS;
 	  compatible with iso8859-1.
 
@@ -452,6 +452,161 @@ config NLS_KOI8_U
 	  input/output character sets. Say Y here for the preferred Ukrainian
 	  (koi8-u) and Belarusian (koi8-ru) character sets.
 
+config NLS_CODEPAGE_MACROMAN
+	tristate "Codepage macroman"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  much of Europe -- United Kingdom, Germany, Spain, Italy, and [add
+	  more countries here].
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACCELTIC
+	tristate "Codepage macceltic"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Celtic.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACCENTEURO
+	tristate "Codepage maccenteuro"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Central Europe.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACCROATIAN
+	tristate "Codepage maccroatian"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Croatian.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACCYRILLIC
+	tristate "Codepage maccyrillic"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Cyrillic.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACGAELIC
+	tristate "Codepage macgaelic"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Gaelic.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACGREEK
+	tristate "Codepage macgreek"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Greek.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACICELAND
+	tristate "Codepage maciceland"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Iceland.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACINUIT
+	tristate "Codepage macinuit"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Inuit.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACROMANIAN
+	tristate "Codepage macromanian"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Romanian.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_MACTURKISH
+	tristate "Codepage macturkish"
+	---help---
+	  The Apple HFS file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called MAC codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  Mac partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Mac codepage that is used for
+	  Turkish.
+
+	  If unsure, say Y.
+
 config NLS_UTF8
 	tristate "NLS UTF-8"
 	help

fs/nls/Makefile

@@ -2,6 +2,18 @@
 # Makefile for native language support
 #
 
+CONFIG_NLS_MACCELTIC=m
+CONFIG_NLS_MACCENTEURO=m
+CONFIG_NLS_MACCROATIAN=m
+CONFIG_NLS_MACCYRILLIC=m
+CONFIG_NLS_MACGAELIC=m
+CONFIG_NLS_MACGREEK=m
+CONFIG_NLS_MACICELAND=m
+CONFIG_NLS_MACINUIT=m
+CONFIG_NLS_MACROMANIAN=m
+CONFIG_NLS_MACROMAN=m
+CONFIG_NLS_MACTURKISH=m
+
 obj-$(CONFIG_NLS)		+= nls_base.o
 
 obj-$(CONFIG_NLS_CODEPAGE_437)	+= nls_cp437.o
@@ -42,3 +54,14 @@ obj-$(CONFIG_NLS_ISO8859_15)	+= nls_iso8859-15.o
 obj-$(CONFIG_NLS_KOI8_R)	+= nls_koi8-r.o
 obj-$(CONFIG_NLS_KOI8_U)	+= nls_koi8-u.o nls_koi8-ru.o
 obj-$(CONFIG_NLS_UTF8)		+= nls_utf8.o
+obj-$(CONFIG_NLS_MACCELTIC)     += nls_macceltic.o
+obj-$(CONFIG_NLS_MACCENTEURO)   += nls_maccenteuro.o
+obj-$(CONFIG_NLS_MACCROATIAN)   += nls_maccroatian.o
+obj-$(CONFIG_NLS_MACCYRILLIC)   += nls_maccyrillic.o
+obj-$(CONFIG_NLS_MACGAELIC)     += nls_macgaelic.o
+obj-$(CONFIG_NLS_MACGREEK)      += nls_macgreek.o
+obj-$(CONFIG_NLS_MACICELAND)    += nls_maciceland.o
+obj-$(CONFIG_NLS_MACINUIT)      += nls_macinuit.o
+obj-$(CONFIG_NLS_MACROMANIAN)   += nls_macromanian.o
+obj-$(CONFIG_NLS_MACROMAN)      += nls_macroman.o
+obj-$(CONFIG_NLS_MACTURKISH)    += nls_macturkish.o

fs/pipe.c

@@ -693,7 +693,7 @@ static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 
 			return put_user(count, (int __user *)arg);
 		default:
-			return -EINVAL;
+			return -ENOIOCTLCMD;
 	}
 }
 

fs/proc/array.c

@@ -370,7 +370,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task, int whole)
 {
 	unsigned long vsize, eip, esp, wchan = ~0UL;
-	long priority, nice;
+	int priority, nice;
 	int tty_pgrp = -1, tty_nr = 0;
 	sigset_t sigign, sigcatch;
 	char state;
@@ -492,7 +492,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 	seq_put_decimal_ull(m, ' ', 0);
 	seq_put_decimal_ull(m, ' ', start_time);
 	seq_put_decimal_ull(m, ' ', vsize);
-	seq_put_decimal_ll(m, ' ', mm ? get_mm_rss(mm) : 0);
+	seq_put_decimal_ull(m, ' ', mm ? get_mm_rss(mm) : 0);
 	seq_put_decimal_ull(m, ' ', rsslim);
 	seq_put_decimal_ull(m, ' ', mm ? (permitted ? mm->start_code : 1) : 0);
 	seq_put_decimal_ull(m, ' ', mm ? (permitted ? mm->end_code : 1) : 0);
@@ -517,9 +517,23 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 	seq_put_decimal_ull(m, ' ', delayacct_blkio_ticks(task));
 	seq_put_decimal_ull(m, ' ', cputime_to_clock_t(gtime));
 	seq_put_decimal_ll(m, ' ', cputime_to_clock_t(cgtime));
-	seq_put_decimal_ull(m, ' ', (mm && permitted) ? mm->start_data : 0);
-	seq_put_decimal_ull(m, ' ', (mm && permitted) ? mm->end_data : 0);
-	seq_put_decimal_ull(m, ' ', (mm && permitted) ? mm->start_brk : 0);
+
+	if (mm && permitted) {
+		seq_put_decimal_ull(m, ' ', mm->start_data);
+		seq_put_decimal_ull(m, ' ', mm->end_data);
+		seq_put_decimal_ull(m, ' ', mm->start_brk);
+		seq_put_decimal_ull(m, ' ', mm->arg_start);
+		seq_put_decimal_ull(m, ' ', mm->arg_end);
+		seq_put_decimal_ull(m, ' ', mm->env_start);
+		seq_put_decimal_ull(m, ' ', mm->env_end);
+	} else
+		seq_printf(m, " 0 0 0 0 0 0 0");
+
+	if (permitted)
+		seq_put_decimal_ll(m, ' ', task->exit_code);
+	else
+		seq_put_decimal_ll(m, ' ', 0);
+
 	seq_putc(m, '\n');
 	if (mm)
 		mmput(mm);
@@ -565,3 +579,126 @@ int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
 
 	return 0;
 }
+
+#ifdef CONFIG_CHECKPOINT_RESTORE
+static struct pid *
+get_children_pid(struct inode *inode, struct pid *pid_prev, loff_t pos)
+{
+	struct task_struct *start, *task;
+	struct pid *pid = NULL;
+
+	read_lock(&tasklist_lock);
+
+	start = pid_task(proc_pid(inode), PIDTYPE_PID);
+	if (!start)
+		goto out;
+
+	/*
+	 * Lets try to continue searching first, this gives
+	 * us significant speedup on children-rich processes.
+	 */
+	if (pid_prev) {
+		task = pid_task(pid_prev, PIDTYPE_PID);
+		if (task && task->real_parent == start &&
+		    !(list_empty(&task->sibling))) {
+			if (list_is_last(&task->sibling, &start->children))
+				goto out;
+			task = list_first_entry(&task->sibling,
+						struct task_struct, sibling);
+			pid = get_pid(task_pid(task));
+			goto out;
+		}
+	}
+
+	/*
+	 * Slow search case.
+	 *
+	 * We might miss some children here if children
+	 * are exited while we were not holding the lock,
+	 * but it was never promised to be accurate that
+	 * much.
+	 *
+	 * "Just suppose that the parent sleeps, but N children
+	 *  exit after we printed their tids. Now the slow paths
+	 *  skips N extra children, we miss N tasks." (c)
+	 *
+	 * So one need to stop or freeze the leader and all
+	 * its children to get a precise result.
+	 */
+	list_for_each_entry(task, &start->children, sibling) {
+		if (pos-- == 0) {
+			pid = get_pid(task_pid(task));
+			break;
+		}
+	}
+
+out:
+	read_unlock(&tasklist_lock);
+	return pid;
+}
+
+static int children_seq_show(struct seq_file *seq, void *v)
+{
+	struct inode *inode = seq->private;
+	pid_t pid;
+
+	pid = pid_nr_ns(v, inode->i_sb->s_fs_info);
+	return seq_printf(seq, "%d ", pid);
+}
+
+static void *children_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	return get_children_pid(seq->private, NULL, *pos);
+}
+
+static void *children_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct pid *pid;
+
+	pid = get_children_pid(seq->private, v, *pos + 1);
+	put_pid(v);
+
+	++*pos;
+	return pid;
+}
+
+static void children_seq_stop(struct seq_file *seq, void *v)
+{
+	put_pid(v);
+}
+
+static const struct seq_operations children_seq_ops = {
+	.start	= children_seq_start,
+	.next	= children_seq_next,
+	.stop	= children_seq_stop,
+	.show	= children_seq_show,
+};
+
+static int children_seq_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *m;
+	int ret;
+
+	ret = seq_open(file, &children_seq_ops);
+	if (ret)
+		return ret;
+
+	m = file->private_data;
+	m->private = inode;
+
+	return ret;
+}
+
+int children_seq_release(struct inode *inode, struct file *file)
+{
+	seq_release(inode, file);
+	return 0;
+}
+
+const struct file_operations proc_tid_children_operations = {
+	.open    = children_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = children_seq_release,
+};
+#endif /* CONFIG_CHECKPOINT_RESTORE */

fs/proc/internal.h

@@ -31,8 +31,6 @@ struct vmalloc_info {
 	unsigned long	largest_chunk;
 };
 
-extern struct mm_struct *mm_for_maps(struct task_struct *);
-
 #ifdef CONFIG_MMU
 #define VMALLOC_TOTAL (VMALLOC_END - VMALLOC_START)
 extern void get_vmalloc_info(struct vmalloc_info *vmi);
@@ -56,6 +54,7 @@ extern int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
 				struct pid *pid, struct task_struct *task);
 extern loff_t mem_lseek(struct file *file, loff_t offset, int orig);
 
+extern const struct file_operations proc_tid_children_operations;
 extern const struct file_operations proc_pid_maps_operations;
 extern const struct file_operations proc_tid_maps_operations;
 extern const struct file_operations proc_pid_numa_maps_operations;

fs/proc/task_nommu.c

@@ -223,7 +223,7 @@ static void *m_start(struct seq_file *m, loff_t *pos)
 	if (!priv->task)
 		return ERR_PTR(-ESRCH);
 
-	mm = mm_for_maps(priv->task);
+	mm = mm_access(priv->task, PTRACE_MODE_READ);
 	if (!mm || IS_ERR(mm)) {
 		put_task_struct(priv->task);
 		priv->task = NULL;

fs/read_write.c

@@ -633,8 +633,7 @@ ssize_t do_loop_readv_writev(struct file *filp, struct iovec *iov,
 ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
 			      unsigned long nr_segs, unsigned long fast_segs,
 			      struct iovec *fast_pointer,
-			      struct iovec **ret_pointer,
-			      int check_access)
+			      struct iovec **ret_pointer)
 {
 	unsigned long seg;
 	ssize_t ret;
@@ -690,7 +689,7 @@ ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
 			ret = -EINVAL;
 			goto out;
 		}
-		if (check_access
+		if (type >= 0
 		    && unlikely(!access_ok(vrfy_dir(type), buf, len))) {
 			ret = -EFAULT;
 			goto out;
@@ -723,7 +722,7 @@ static ssize_t do_readv_writev(int type, struct file *file,
 	}
 
 	ret = rw_copy_check_uvector(type, uvector, nr_segs,
-				    ARRAY_SIZE(iovstack), iovstack, &iov, 1);
+				    ARRAY_SIZE(iovstack), iovstack, &iov);
 	if (ret <= 0)
 		goto out;
 

include/asm-generic/bitsperlong.h

@@ -28,5 +28,9 @@
 #error Inconsistent word size. Check asm/bitsperlong.h
 #endif
 
+#ifndef BITS_PER_LONG_LONG
+#define BITS_PER_LONG_LONG 64
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_GENERIC_BITS_PER_LONG */

include/drm/drm_mem_util.h

@@ -31,7 +31,7 @@
 
 static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
 {
-	if (size != 0 && nmemb > ULONG_MAX / size)
+	if (size != 0 && nmemb > SIZE_MAX / size)
 		return NULL;
 
 	if (size * nmemb <= PAGE_SIZE)
@@ -44,7 +44,7 @@ static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
 /* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */
 static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size)
 {
-	if (size != 0 && nmemb > ULONG_MAX / size)
+	if (size != 0 && nmemb > SIZE_MAX / size)
 		return NULL;
 
 	if (size * nmemb <= PAGE_SIZE)

include/linux/Kbuild

@@ -226,6 +226,7 @@ header-y += kdev_t.h
 header-y += kernel.h
 header-y += kernelcapi.h
 header-y += kernel-page-flags.h
+header-y += kexec.h
 header-y += keyboard.h
 header-y += keyctl.h
 header-y += l2tp.h

include/linux/compat.h

@@ -577,8 +577,7 @@ extern ssize_t compat_rw_copy_check_uvector(int type,
 		const struct compat_iovec __user *uvector,
 		unsigned long nr_segs,
 		unsigned long fast_segs, struct iovec *fast_pointer,
-		struct iovec **ret_pointer,
-		int check_access);
+		struct iovec **ret_pointer);
 
 extern void __user *compat_alloc_user_space(unsigned long len);
 

include/linux/cpu.h

@@ -177,6 +177,7 @@ extern void put_online_cpus(void);
 #define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
 #define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
 #define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
+void clear_tasks_mm_cpumask(int cpu);
 int cpu_down(unsigned int cpu);
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE

include/linux/cred.h

@@ -277,17 +277,13 @@ static inline void put_cred(const struct cred *_cred)
  * @task: The task to query
  *
  * Access the objective credentials of a task.  The caller must hold the RCU
- * readlock or the task must be dead and unable to change its own credentials.
+ * readlock.
  *
  * The result of this function should not be passed directly to get_cred();
  * rather get_task_cred() should be used instead.
  */
 #define __task_cred(task)	\
-	({								\
-		const struct task_struct *__t = (task);			\
-		rcu_dereference_check(__t->real_cred,			\
-				      task_is_dead(__t));		\
-	})
+	rcu_dereference((task)->real_cred)
 
 /**
  * get_current_cred - Get the current task's subjective credentials

include/linux/dmaengine.h

@@ -635,6 +635,18 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
 						  dir, flags, NULL);
 }
 
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+struct rio_dma_ext;
+static inline struct dma_async_tx_descriptor *dmaengine_prep_rio_sg(
+	struct dma_chan *chan, struct scatterlist *sgl,	unsigned int sg_len,
+	enum dma_transfer_direction dir, unsigned long flags,
+	struct rio_dma_ext *rio_ext)
+{
+	return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
+						  dir, flags, rio_ext);
+}
+#endif
+
 static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_transfer_direction dir)

include/linux/eventfd.h

@@ -34,7 +34,7 @@ void eventfd_ctx_put(struct eventfd_ctx *ctx);
 struct file *eventfd_fget(int fd);
 struct eventfd_ctx *eventfd_ctx_fdget(int fd);
 struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
-int eventfd_signal(struct eventfd_ctx *ctx, int n);
+__u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n);
 ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
 int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
 				  __u64 *cnt);

include/linux/kernel.h

@@ -35,6 +35,7 @@
 #define LLONG_MAX	((long long)(~0ULL>>1))
 #define LLONG_MIN	(-LLONG_MAX - 1)
 #define ULLONG_MAX	(~0ULL)
+#define SIZE_MAX	(~(size_t)0)
 
 #define STACK_MAGIC	0xdeadbeef