vme: tsi148: Master windows support USERx and CR/CSR accesses, not slaves

The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.

Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/vme/bridges/vme_tsi148.c

@@ -587,11 +587,6 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,
 		granularity = 0x10000;
 		addr |= TSI148_LCSR_ITAT_AS_A64;
 		break;
-	case VME_CRCSR:
-	case VME_USER1:
-	case VME_USER2:
-	case VME_USER3:
-	case VME_USER4:
 	default:
 		dev_err(tsi148_bridge->parent, "Invalid address space\n");
 		return -EINVAL;
@@ -2471,7 +2466,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		master_image->locked = 0;
 		master_image->number = i;
 		master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
-			VME_A64;
+			VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
+			VME_USER3 | VME_USER4;
 		master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
 			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
 			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
@@ -2500,8 +2496,7 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		slave_image->locked = 0;
 		slave_image->number = i;
 		slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
-			VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
-			VME_USER3 | VME_USER4;
+			VME_A64;
 		slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
 			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
 			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |