Skip to content

L
linux
Commit 08e31686 authored by Len Brown's avatar Len Brown
Browse files
Options

Pull thinkpad into release branch

parents d6da5ce8 f432255e
Hide whitespace changes
Inline Side-by-side
Showing with 854 additions and 159 deletions
Documentation/thinkpad-acpi.txt
View file @ 08e31686
ThinkPad ACPI Extras Driver
Version 0.14
April 21st, 2007
Version 0.15
July 1st, 2007
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
http://ibm-acpi.sf.net/
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
http://ibm-acpi.sf.net/
This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
......@@ -134,54 +134,68 @@ end of this document. Changes to the sysfs interface done by the kernel
subsystems are not documented here, nor are they tracked by this
attribute.
Changes to the thinkpad-acpi sysfs interface are only considered
non-experimental when they are submitted to Linux mainline, at which
point the changes in this interface are documented and interface_version
may be updated. If you are using any thinkpad-acpi features not yet
sent to mainline for merging, you do so on your own risk: these features
may disappear, or be implemented in a different and incompatible way by
the time they are merged in Linux mainline.
Changes that are backwards-compatible by nature (e.g. the addition of
attributes that do not change the way the other attributes work) do not
always warrant an update of interface_version. Therefore, one must
expect that an attribute might not be there, and deal with it properly
(an attribute not being there *is* a valid way to make it clear that a
feature is not available in sysfs).
Hot keys
--------
procfs: /proc/acpi/ibm/hotkey
sysfs device attribute: hotkey_*
Without this driver, only the Fn-F4 key (sleep button) generates an
ACPI event. With the driver loaded, the hotkey feature enabled and the
mask set (see below), the various hot keys generate ACPI events in the
In a ThinkPad, the ACPI HKEY handler is responsible for comunicating
some important events and also keyboard hot key presses to the operating
system. Enabling the hotkey functionality of thinkpad-acpi signals the
firmware that such a driver is present, and modifies how the ThinkPad
firmware will behave in many situations.
When the hotkey feature is enabled and the hot key mask is set (see
below), the various hot keys either generate ACPI events in the
following format:
ibm/hotkey HKEY 00000080 0000xxxx
The last four digits vary depending on the key combination pressed.
All labeled Fn-Fx key combinations generate distinct events. In
addition, the lid microswitch and some docking station buttons may
also generate such events.
The bit mask allows some control over which hot keys generate ACPI
events. Not all bits in the mask can be modified. Not all bits that
can be modified do anything. Not all hot keys can be individually
controlled by the mask. Most recent ThinkPad models honor the
following bits (assuming the hot keys feature has been enabled):
key bit behavior when set behavior when unset
Fn-F3 always generates ACPI event
Fn-F4 always generates ACPI event
Fn-F5 0010 generate ACPI event enable/disable Bluetooth
Fn-F7 0040 generate ACPI event switch LCD and external display
Fn-F8 0080 generate ACPI event expand screen or none
Fn-F9 0100 generate ACPI event none
Fn-F12 always generates ACPI event
Some models do not support all of the above. For example, the T30 does
not support Fn-F5 and Fn-F9. Other models do not support the mask at
all. On those models, hot keys cannot be controlled individually.
Note that enabling ACPI events for some keys prevents their default
behavior. For example, if events for Fn-F5 are enabled, that key will
no longer enable/disable Bluetooth by itself. This can still be done
from an acpid handler for the ibm/hotkey event.
Note also that not all Fn key combinations are supported through
ACPI. For example, on the X40, the brightness, volume and "Access IBM"
buttons do not generate ACPI events even with this driver. They *can*
be used through the "ThinkPad Buttons" utility, see
http://www.nongnu.org/tpb/
or events over the input layer. The input layer support accepts the
standard IOCTLs to remap the keycodes assigned to each hotkey.
When the input device is open, the driver will suppress any ACPI hot key
events that get translated into a meaningful input layer event, in order
to avoid sending duplicate events to userspace. Hot keys that are
mapped to KEY_RESERVED in the keymap are not translated, and will always
generate an ACPI ibm/hotkey HKEY event, and no input layer events.
The hot key bit mask allows some control over which hot keys generate
events. If a key is "masked" (bit set to 0 in the mask), the firmware
will handle it. If it is "unmasked", it signals the firmware that
thinkpad-acpi would prefer to handle it, if the firmware would be so
kind to allow it (and it often doesn't!).
Not all bits in the mask can be modified. Not all bits that can be
modified do anything. Not all hot keys can be individually controlled
by the mask. Some models do not support the mask at all, and in those
models, hot keys cannot be controlled individually. The behaviour of
the mask is, therefore, higly dependent on the ThinkPad model.
Note that unmasking some keys prevents their default behavior. For
example, if Fn+F5 is unmasked, that key will no longer enable/disable
Bluetooth by itself.
Note also that not all Fn key combinations are supported through ACPI.
For example, on the X40, the brightness, volume and "Access IBM" buttons
do not generate ACPI events even with this driver. They *can* be used
through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
procfs notes:
......@@ -189,9 +203,9 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
... any other 4-hex-digit mask ...
echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
... any other 8-hex-digit mask ...
echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
sysfs notes:
......@@ -202,7 +216,7 @@ sysfs notes:
key feature status will be restored to this value.
0: hot keys were disabled
1: hot keys were enabled
1: hot keys were enabled (unusual)
hotkey_bios_mask:
Returns the hot keys mask when thinkpad-acpi was loaded.
......@@ -217,9 +231,182 @@ sysfs notes:
1: enables the hot keys feature / feature enabled
hotkey_mask:
bit mask to enable ACPI event generation for each hot
key (see above). Returns the current status of the hot
keys mask, and allows one to modify it.
bit mask to enable driver-handling and ACPI event
generation for each hot key (see above). Returns the
current status of the hot keys mask, and allows one to
modify it.
hotkey_all_mask:
bit mask that should enable event reporting for all
supported hot keys, when echoed to hotkey_mask above.
Unless you know which events need to be handled
passively (because the firmware *will* handle them
anyway), do *not* use hotkey_all_mask. Use
hotkey_recommended_mask, instead. You have been warned.
hotkey_recommended_mask:
bit mask that should enable event reporting for all
supported hot keys, except those which are always
handled by the firmware anyway. Echo it to
hotkey_mask above, to use.
hotkey_radio_sw:
if the ThinkPad has a hardware radio switch, this
attribute will read 0 if the switch is in the "radios
disabled" postition, and 1 if the switch is in the
"radios enabled" position.
input layer notes:
A Hot key is mapped to a single input layer EV_KEY event, possibly
followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
code. An EV_SYN event will always be generated to mark the end of the
event block.
Do not use the EV_MSC MSC_SCAN events to process keys. They are to be
used as a helper to remap keys, only. They are particularly useful when
remapping KEY_UNKNOWN keys.
The events are available in an input device, with the following id:
Bus: BUS_HOST
vendor: 0x1014 (PCI_VENDOR_ID_IBM) or
0x17aa (PCI_VENDOR_ID_LENOVO)
product: 0x5054 ("TP")
version: 0x4101
The version will have its LSB incremented if the keymap changes in a
backwards-compatible way. The MSB shall always be 0x41 for this input
device. If the MSB is not 0x41, do not use the device as described in
this section, as it is either something else (e.g. another input device
exported by a thinkpad driver, such as HDAPS) or its functionality has
been changed in a non-backwards compatible way.
Adding other event types for other functionalities shall be considered a
backwards-compatible change for this input device.
Thinkpad-acpi Hot Key event map (version 0x4101):
ACPI Scan
event code Key Notes
0x1001 0x00 FN+F1 -
0x1002 0x01 FN+F2 IBM: battery (rare)
Lenovo: Screen lock
0x1003 0x02 FN+F3 Many IBM models always report
this hot key, even with hot keys
disabled or with Fn+F3 masked
off
IBM: screen lock
Lenovo: battery
0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
semanthics, i.e. sleep-to-RAM).
It is always generate some kind
of event, either the hot key
event or a ACPI sleep button
event. The firmware may
refuse to generate further FN+F4
key presses until a S3 or S4 ACPI
sleep cycle is performed or some
time passes.
0x1005 0x04 FN+F5 Radio. Enables/disables
the internal BlueTooth hardware
and W-WAN card if left in control
of the firmware. Does not affect
the WLAN card.
Should be used to turn on/off all
radios (bluetooth+W-WAN+WLAN),
really.
0x1006 0x05 FN+F6 -
0x1007 0x06 FN+F7 Video output cycle.
Do you feel lucky today?
0x1008 0x07 FN+F8 IBM: toggle screen expand
Lenovo: configure ultranav
0x1009 0x08 FN+F9 -
.. .. ..
0x100B 0x0A FN+F11 -
0x100C 0x0B FN+F12 Sleep to disk. You are always
supposed to handle it yourself,
either through the ACPI event,
or through a hotkey event.
The firmware may refuse to
generate further FN+F4 key
press events until a S3 or S4
ACPI sleep cycle is performed,
or some time passes.
0x100D 0x0C FN+BACKSPACE -
0x100E 0x0D FN+INSERT -
0x100F 0x0E FN+DELETE -
0x1010 0x0F FN+HOME Brightness up. This key is
always handled by the firmware
in IBM ThinkPads, even when
unmasked. Just leave it alone.
For Lenovo ThinkPads with a new
BIOS, it has to be handled either
by the ACPI OSI, or by userspace.
0x1011 0x10 FN+END Brightness down. See brightness
up for details.
0x1012 0x11 FN+PGUP Thinklight toggle. This key is
always handled by the firmware,
even when unmasked.
0x1013 0x12 FN+PGDOWN -
0x1014 0x13 FN+SPACE Zoom key
0x1015 0x14 VOLUME UP Internal mixer volume up. This
key is always handled by the
firmware, even when unmasked.
NOTE: Lenovo seems to be changing
this.
0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
key is always handled by the
firmware, even when unmasked.
NOTE: Lenovo seems to be changing
this.
0x1017 0x16 MUTE Mute internal mixer. This
key is always handled by the
firmware, even when unmasked.
0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key
0x1019 0x18 unknown
.. .. ..
0x1020 0x1F unknown
The ThinkPad firmware does not allow one to differentiate when most hot
keys are pressed or released (either that, or we don't know how to, yet).
For these keys, the driver generates a set of events for a key press and
immediately issues the same set of events for a key release. It is
unknown by the driver if the ThinkPad firmware triggered these events on
hot key press or release, but the firmware will do it for either one, not
both.
If a key is mapped to KEY_RESERVED, it generates no input events at all,
and it may generate a legacy thinkpad-acpi ACPI hotkey event.
If a key is mapped to KEY_UNKNOWN, it generates an input event that
includes an scan code, and it may also generate a legacy thinkpad-acpi
ACPI hotkey event.
If a key is mapped to anything else, it will only generate legacy
thinkpad-acpi ACPI hotkey events if nobody has opened the input device.
Non hot-key ACPI HKEY event map:
0x5001 Lid closed
0x5002 Lid opened
0x7000 Radio Switch may have changed state
Bluetooth
......@@ -437,27 +624,34 @@ CMOS control
procfs: /proc/acpi/ibm/cmos
sysfs device attribute: cmos_command
This feature is used internally by the ACPI firmware to control the
ThinkLight on most newer ThinkPad models. It may also control LCD
brightness, sounds volume and more, but only on some models.
This feature is mostly used internally by the ACPI firmware to keep the legacy
CMOS NVRAM bits in sync with the current machine state, and to record this
state so that the ThinkPad will retain such settings across reboots.
Some of these commands actually perform actions in some ThinkPad models, but
this is expected to disappear more and more in newer models. As an example, in
a T43 and in a X40, commands 12 and 13 still control the ThinkLight state for
real, but commands 0 to 2 don't control the mixer anymore (they have been
phased out) and just update the NVRAM.
The range of valid cmos command numbers is 0 to 21, but not all have an
effect and the behavior varies from model to model. Here is the behavior
on the X40 (tpb is the ThinkPad Buttons utility):
0 - no effect but tpb reports "Volume down"
1 - no effect but tpb reports "Volume up"
2 - no effect but tpb reports "Mute on"
3 - simulate pressing the "Access IBM" button
4 - LCD brightness up
5 - LCD brightness down
11 - toggle screen expansion
12 - ThinkLight on
13 - ThinkLight off
14 - no effect but tpb reports ThinkLight status change
0 - Related to "Volume down" key press
1 - Related to "Volume up" key press
2 - Related to "Mute on" key press
3 - Related to "Access IBM" key press
4 - Related to "LCD brightness up" key pess
5 - Related to "LCD brightness down" key press
11 - Related to "toggle screen expansion" key press/function
12 - Related to "ThinkLight on"
13 - Related to "ThinkLight off"
14 - Related to "ThinkLight" key press (toggle thinklight)
The cmos command interface is prone to firmware split-brain problems, as
in newer ThinkPads it is just a compatibility layer.
in newer ThinkPads it is just a compatibility layer. Do not use it, it is
exported just as a debug tool.
LED control -- /proc/acpi/ibm/led
---------------------------------
......@@ -516,23 +710,15 @@ Temperature sensors
procfs: /proc/acpi/ibm/thermal
sysfs device attributes: (hwmon) temp*_input
Most ThinkPads include six or more separate temperature sensors but
only expose the CPU temperature through the standard ACPI methods.
This feature shows readings from up to eight different sensors on older
ThinkPads, and it has experimental support for up to sixteen different
sensors on newer ThinkPads.
EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
implementation directly accesses hardware registers and may not work as
expected. USE WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module. When EXPERIMENTAL
mode is enabled, reading the first 8 sensors on newer ThinkPads will
also use an new experimental thermal sensor access mode.
Most ThinkPads include six or more separate temperature sensors but only
expose the CPU temperature through the standard ACPI methods. This
feature shows readings from up to eight different sensors on older
ThinkPads, and up to sixteen different sensors on newer ThinkPads.
For example, on the X40, a typical output may be:
temperatures: 42 42 45 41 36 -128 33 -128
EXPERIMENTAL: On the T43/p, a typical output may be:
On the T43/p, a typical output may be:
temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
The mapping of thermal sensors to physical locations varies depending on
......@@ -562,7 +748,8 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
2: System board, left side (near PCMCIA slot), reported as HDAPS temp
3: PCMCIA slot
9: MCH (northbridge) to DRAM Bus
10: ICH (southbridge), under Mini-PCI card, under touchpad
10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
card, under touchpad
11: Power regulator, underside of system board, below F2 key
The A31 has a very atypical layout for the thermal sensors
......@@ -681,6 +868,12 @@ cannot be controlled.
The backlight control has eight levels, ranging from 0 to 7. Some of the
levels may not be distinct.
There are two interfaces to the firmware for brightness control, EC and CMOS.
To select which one should be used, use the brightness_mode module parameter:
brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
brightness_mode=3 selects both EC and CMOS. The driver tries to autodetect
which interface to use.
Procfs notes:
The available commands are:
......@@ -976,3 +1169,9 @@ Sysfs interface changelog:
0x000100: Initial sysfs support, as a single platform driver and
device.
0x000200: Hot key support for 32 hot keys, and radio slider switch
support.
0x010000: Hot keys are now handled by default over the input
layer, the radio switch generates input event EV_RADIO,
and the driver enables hot key handling by default in
the firmware.
drivers/misc/Kconfig
View file @ 08e31686
......@@ -150,6 +150,7 @@ config THINKPAD_ACPI
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
......@@ -196,4 +197,17 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
config THINKPAD_ACPI_INPUT_ENABLED
bool "Enable input layer support by default"
depends on THINKPAD_ACPI
default y
---help---
Enables hot key handling over the input layer by default. If unset,
the driver does not enable any hot key handling by default, and also
starts up with a mostly empty keymap.
If you are not sure, say Y here. Say N to retain the deprecated
behavior of ibm-acpi, and thinkpad-acpi for kernels up to 2.6.21.
endif # MISC_DEVICES
drivers/misc/thinkpad_acpi.c
View file @ 08e31686
......@@ -21,8 +21,8 @@
* 02110-1301, USA.
*/
#define IBM_VERSION "0.14"
#define TPACPI_SYSFS_VERSION 0x000100
#define IBM_VERSION "0.15"
#define TPACPI_SYSFS_VERSION 0x010000
/*
* Changelog:
......@@ -92,6 +92,29 @@ MODULE_LICENSE("GPL");
/* Please remove this in year 2009 */
MODULE_ALIAS("ibm_acpi");
/*
* DMI matching for module autoloading
*
* See http://thinkwiki.org/wiki/List_of_DMI_IDs
* See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads
*
* Only models listed in thinkwiki will be supported, so add yours
* if it is not there yet.
*/
#define IBM_BIOS_MODULE_ALIAS(__type) \
MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")
/* Non-ancient thinkpads */
MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
/* Ancient thinkpad BIOSes have to be identified by
* BIOS type or model number, and there are far less
* BIOS types than model numbers... */
IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]");
IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");
IBM_BIOS_MODULE_ALIAS("K[U,X-Z]");
#define __unused __attribute__ ((unused))
/****************************************************************************
......@@ -106,7 +129,7 @@ MODULE_ALIAS("ibm_acpi");
* ACPI basic handles
*/
static acpi_handle root_handle = NULL;
static acpi_handle root_handle;
#define IBM_HANDLE(object, parent, paths...) \
static acpi_handle object##_handle; \
......@@ -487,19 +510,36 @@ static char *next_cmd(char **cmds)
/****************************************************************************
****************************************************************************
*
* Device model: hwmon and platform
* Device model: input, hwmon and platform
*
****************************************************************************
****************************************************************************/
static struct platform_device *tpacpi_pdev = NULL;
static struct class_device *tpacpi_hwmon = NULL;
static struct platform_device *tpacpi_pdev;
static struct class_device *tpacpi_hwmon;
static struct input_dev *tpacpi_inputdev;
static int tpacpi_resume_handler(struct platform_device *pdev)
{
struct ibm_struct *ibm, *itmp;
list_for_each_entry_safe(ibm, itmp,
&tpacpi_all_drivers,
all_drivers) {
if (ibm->resume)
(ibm->resume)();
}
return 0;
}
static struct platform_driver tpacpi_pdriver = {
.driver = {
.name = IBM_DRVR_NAME,
.owner = THIS_MODULE,
},
.resume = tpacpi_resume_handler,
};
......@@ -677,9 +717,19 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
printk(IBM_INFO "%s\n", IBM_URL);
if (ibm_thinkpad_ec_found)
printk(IBM_INFO "ThinkPad EC firmware %s\n",
ibm_thinkpad_ec_found);
printk(IBM_INFO "ThinkPad BIOS %s, EC %s\n",
(thinkpad_id.bios_version_str) ?
thinkpad_id.bios_version_str : "unknown",
(thinkpad_id.ec_version_str) ?
thinkpad_id.ec_version_str : "unknown");
if (thinkpad_id.vendor && thinkpad_id.model_str)
printk(IBM_INFO "%s %s\n",
(thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ?
"IBM" : ((thinkpad_id.vendor ==
PCI_VENDOR_ID_LENOVO) ?
"Lenovo" : "Unknown vendor"),
thinkpad_id.model_str);
return 0;
}
......@@ -704,16 +754,28 @@ static struct ibm_struct thinkpad_acpi_driver_data = {
*/
static int hotkey_orig_status;
static int hotkey_orig_mask;
static u32 hotkey_orig_mask;
static u32 hotkey_all_mask;
static u32 hotkey_reserved_mask;
static u16 *hotkey_keycode_map;
static struct attribute_set *hotkey_dev_attributes = NULL;
static struct attribute_set *hotkey_dev_attributes;
static int hotkey_get_wlsw(int *status)
{
if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
return -EIO;
return 0;
}
/* sysfs hotkey enable ------------------------------------------------- */
static ssize_t hotkey_enable_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int res, status, mask;
int res, status;
u32 mask;
res = hotkey_get(&status, &mask);
if (res)
......@@ -727,7 +789,8 @@ static ssize_t hotkey_enable_store(struct device *dev,
const char *buf, size_t count)
{
unsigned long t;
int res, status, mask;
int res, status;
u32 mask;
if (parse_strtoul(buf, 1, &t))
return -EINVAL;
......@@ -748,13 +811,14 @@ static ssize_t hotkey_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int res, status, mask;
int res, status;
u32 mask;
res = hotkey_get(&status, &mask);
if (res)
return res;
return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask);
return snprintf(buf, PAGE_SIZE, "0x%08x\n", mask);
}
static ssize_t hotkey_mask_store(struct device *dev,
......@@ -762,9 +826,10 @@ static ssize_t hotkey_mask_store(struct device *dev,
const char *buf, size_t count)
{
unsigned long t;
int res, status, mask;
int res, status;
u32 mask;
if (parse_strtoul(buf, 0xffff, &t))
if (parse_strtoul(buf, 0xffffffffUL, &t))
return -EINVAL;
res = hotkey_get(&status, &mask);
......@@ -794,26 +859,123 @@ static ssize_t hotkey_bios_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask);
return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask);
}
static struct device_attribute dev_attr_hotkey_bios_mask =
__ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
/* sysfs hotkey all_mask ----------------------------------------------- */
static ssize_t hotkey_all_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_all_mask);
}
static struct device_attribute dev_attr_hotkey_all_mask =
__ATTR(hotkey_all_mask, S_IRUGO, hotkey_all_mask_show, NULL);
/* sysfs hotkey recommended_mask --------------------------------------- */
static ssize_t hotkey_recommended_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "0x%08x\n",
hotkey_all_mask & ~hotkey_reserved_mask);
}
static struct device_attribute dev_attr_hotkey_recommended_mask =
__ATTR(hotkey_recommended_mask, S_IRUGO,
hotkey_recommended_mask_show, NULL);
/* sysfs hotkey radio_sw ----------------------------------------------- */
static ssize_t hotkey_radio_sw_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int res, s;
res = hotkey_get_wlsw(&s);
if (res < 0)
return res;
return snprintf(buf, PAGE_SIZE, "%d\n", !!s);
}
static struct device_attribute dev_attr_hotkey_radio_sw =
__ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL);
/* --------------------------------------------------------------------- */
static struct attribute *hotkey_mask_attributes[] = {
&dev_attr_hotkey_mask.attr,
&dev_attr_hotkey_bios_enabled.attr,
&dev_attr_hotkey_bios_mask.attr,
&dev_attr_hotkey_all_mask.attr,
&dev_attr_hotkey_recommended_mask.attr,
};
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
int res;
static u16 ibm_keycode_map[] __initdata = {
/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
KEY_FN_F1, KEY_FN_F2, KEY_COFFEE, KEY_SLEEP,
KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
/* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
KEY_RESERVED, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
KEY_RESERVED, /* 0x14: VOLUME UP */
KEY_RESERVED, /* 0x15: VOLUME DOWN */
KEY_RESERVED, /* 0x16: MUTE */
KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
};
static u16 lenovo_keycode_map[] __initdata = {
/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP,
KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND,
/* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
KEY_RESERVED, /* 0x14: VOLUME UP */
KEY_RESERVED, /* 0x15: VOLUME DOWN */
KEY_RESERVED, /* 0x16: MUTE */
KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
};
#define TPACPI_HOTKEY_MAP_LEN ARRAY_SIZE(ibm_keycode_map)
#define TPACPI_HOTKEY_MAP_SIZE sizeof(ibm_keycode_map)
#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(ibm_keycode_map[0])
int res, i;
int status;
vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
BUG_ON(!tpacpi_inputdev);
IBM_ACPIHANDLE_INIT(hkey);
mutex_init(&hotkey_mutex);
......@@ -824,7 +986,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
str_supported(tp_features.hotkey));
if (tp_features.hotkey) {
hotkey_dev_attributes = create_attr_set(4, NULL);
hotkey_dev_attributes = create_attr_set(7, NULL);
if (!hotkey_dev_attributes)
return -ENOMEM;
res = add_to_attr_set(hotkey_dev_attributes,
......@@ -840,19 +1002,92 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
str_supported(tp_features.hotkey_mask));
if (tp_features.hotkey_mask) {
/* MHKA available in A31, R40, R40e, T4x, X31, and later */
if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
"MHKA", "qd"))
hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */
}
res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
if (!res && tp_features.hotkey_mask) {
res = add_many_to_attr_set(hotkey_dev_attributes,
hotkey_mask_attributes,
ARRAY_SIZE(hotkey_mask_attributes));
}
/* Not all thinkpads have a hardware radio switch */
if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
tp_features.hotkey_wlsw = 1;
printk(IBM_INFO
"radio switch found; radios are %s\n",
enabled(status, 0));
res = add_to_attr_set(hotkey_dev_attributes,
&dev_attr_hotkey_radio_sw.attr);
}
if (!res)
res = register_attr_set_with_sysfs(
hotkey_dev_attributes,
&tpacpi_pdev->dev.kobj);
if (res)
return res;
/* Set up key map */
hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
GFP_KERNEL);
if (!hotkey_keycode_map) {
printk(IBM_ERR "failed to allocate memory for key map\n");
return -ENOMEM;
}
if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
dbg_printk(TPACPI_DBG_INIT,
"using Lenovo default hot key map\n");
memcpy(hotkey_keycode_map, &lenovo_keycode_map,
TPACPI_HOTKEY_MAP_SIZE);
} else {
dbg_printk(TPACPI_DBG_INIT,
"using IBM default hot key map\n");
memcpy(hotkey_keycode_map, &ibm_keycode_map,
TPACPI_HOTKEY_MAP_SIZE);
}
#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
for (i = 0; i < 12; i++)
hotkey_keycode_map[i] = KEY_UNKNOWN;
#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
set_bit(EV_KEY, tpacpi_inputdev->evbit);
set_bit(EV_MSC, tpacpi_inputdev->evbit);
set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
tpacpi_inputdev->keycode = hotkey_keycode_map;
for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
if (hotkey_keycode_map[i] != KEY_RESERVED) {
set_bit(hotkey_keycode_map[i],
tpacpi_inputdev->keybit);
} else {
if (i < sizeof(hotkey_reserved_mask)*8)
hotkey_reserved_mask |= 1 << i;
}
}
if (tp_features.hotkey_wlsw) {
set_bit(EV_SW, tpacpi_inputdev->evbit);
set_bit(SW_RADIO, tpacpi_inputdev->swbit);
}
#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
dbg_printk(TPACPI_DBG_INIT,
"enabling hot key handling\n");
res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask)
| hotkey_orig_mask);
if (res)
return res;
#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
}
return (tp_features.hotkey)? 0 : 1;
......@@ -875,22 +1110,101 @@ static void hotkey_exit(void)
}
}
static void tpacpi_input_send_key(unsigned int scancode,
unsigned int keycode)
{
if (keycode != KEY_RESERVED) {
input_report_key(tpacpi_inputdev, keycode, 1);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
input_report_key(tpacpi_inputdev, keycode, 0);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
}
}
static void tpacpi_input_send_radiosw(void)
{
int wlsw;
if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw))
input_report_switch(tpacpi_inputdev,
SW_RADIO, !!wlsw);
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
{
int hkey;
u32 hkey;
unsigned int keycode, scancode;
int sendacpi = 1;
if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
if (tpacpi_inputdev->users > 0) {
switch (hkey >> 12) {
case 1:
/* 0x1000-0x1FFF: key presses */
scancode = hkey & 0xfff;
if (scancode > 0 && scancode < 0x21) {
scancode--;
keycode = hotkey_keycode_map[scancode];
tpacpi_input_send_key(scancode, keycode);
sendacpi = (keycode == KEY_RESERVED
|| keycode == KEY_UNKNOWN);
} else {
printk(IBM_ERR
"hotkey 0x%04x out of range for keyboard map\n",
hkey);
}
break;
case 5:
/* 0x5000-0x5FFF: LID */
/* we don't handle it through this path, just
* eat up known LID events */
if (hkey != 0x5001 && hkey != 0x5002) {
printk(IBM_ERR
"unknown LID-related hotkey event: 0x%04x\n",
hkey);
}
break;
case 7:
/* 0x7000-0x7FFF: misc */
if (tp_features.hotkey_wlsw && hkey == 0x7000) {
tpacpi_input_send_radiosw();
sendacpi = 0;
break;
}
/* fallthrough to default */
default:
/* case 2: dock-related */
/* 0x2305 - T43 waking up due to bay lever eject while aslept */
/* case 3: ultra-bay related. maybe bay in dock? */
/* 0x3003 - T43 after wake up by bay lever eject (0x2305) */
printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey);
}
}
if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
acpi_bus_generate_event(ibm->acpi->device, event, hkey);
else {
printk(IBM_ERR "unknown hotkey event %d\n", event);
if (sendacpi)
acpi_bus_generate_event(ibm->acpi->device, event, hkey);
} else {
printk(IBM_ERR "unknown hotkey notification event %d\n", event);
acpi_bus_generate_event(ibm->acpi->device, event, 0);
}
}
static void hotkey_resume(void)
{
tpacpi_input_send_radiosw();
}
/*
* Call with hotkey_mutex held
*/
static int hotkey_get(int *status, int *mask)
static int hotkey_get(int *status, u32 *mask)
{
if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
return -EIO;
......@@ -905,7 +1219,7 @@ static int hotkey_get(int *status, int *mask)
/*
* Call with hotkey_mutex held
*/
static int hotkey_set(int status, int mask)
static int hotkey_set(int status, u32 mask)
{
int i;
......@@ -926,7 +1240,8 @@ static int hotkey_set(int status, int mask)
/* procfs -------------------------------------------------------------- */
static int hotkey_read(char *p)
{
int res, status, mask;
int res, status;
u32 mask;
int len = 0;
if (!tp_features.hotkey) {
......@@ -944,7 +1259,7 @@ static int hotkey_read(char *p)
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
if (tp_features.hotkey_mask) {
len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
len += sprintf(p + len, "mask:\t\t0x%08x\n", mask);
len += sprintf(p + len,
"commands:\tenable, disable, reset, <mask>\n");
} else {
......@@ -957,7 +1272,8 @@ static int hotkey_read(char *p)
static int hotkey_write(char *buf)
{
int res, status, mask;
int res, status;
u32 mask;
char *cmd;
int do_cmd = 0;
......@@ -1012,6 +1328,7 @@ static struct ibm_struct hotkey_driver_data = {
.read = hotkey_read,
.write = hotkey_write,
.exit = hotkey_exit,
.resume = hotkey_resume,
.acpi = &ibm_hotkey_acpidriver,
};
......@@ -1770,7 +2087,10 @@ static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
.type = ACPI_SYSTEM_NOTIFY,
},
{
.hid = IBM_PCI_HID,
/* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
* We just use it to get notifications of dock hotplug
* in very old thinkpads */
.hid = PCI_ROOT_HID_STRING,
.notify = dock_notify,
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
......@@ -1829,7 +2149,7 @@ static int __init dock_init2(struct ibm_init_struct *iibm)
static void dock_notify(struct ibm_struct *ibm, u32 event)
{
int docked = dock_docked();
int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID);
int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, PCI_ROOT_HID_STRING);
if (event == 1 && !pci) /* 570 */
acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
......@@ -2389,7 +2709,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
if (ibm_thinkpad_ec_found && experimental) {
if (thinkpad_id.ec_model) {
/*
* Direct EC access mode: sensors at registers
* 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
......@@ -2533,6 +2853,8 @@ static int thermal_get_sensor(int idx, s32 *value)
snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
return -EIO;
if (t > 127 || t < -127)
t = TP_EC_THERMAL_TMP_NA;
*value = t * 1000;
return 0;
}
......@@ -2671,22 +2993,39 @@ static struct ibm_struct ecdump_driver_data = {
* Backlight/brightness subdriver
*/
static struct backlight_device *ibm_backlight_device = NULL;
static struct backlight_device *ibm_backlight_device;
static struct backlight_ops ibm_backlight_data = {
.get_brightness = brightness_get,
.update_status = brightness_update_status,
};
static struct mutex brightness_mutex;
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
mutex_init(&brightness_mutex);
if (!brightness_mode) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
brightness_mode = 2;
else
brightness_mode = 3;
dbg_printk(TPACPI_DBG_INIT, "selected brightness_mode=%d\n",
brightness_mode);
}
if (brightness_mode > 3)
return -EINVAL;
b = brightness_get(NULL);
if (b < 0)
return b;
return 1;
ibm_backlight_device = backlight_device_register(
TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
......@@ -2722,34 +3061,79 @@ static int brightness_update_status(struct backlight_device *bd)
bd->props.brightness : 0);
}
/*
* ThinkPads can read brightness from two places: EC 0x31, or
* CMOS NVRAM byte 0x5E, bits 0-3.
*/
static int brightness_get(struct backlight_device *bd)
{
u8 level;
if (!acpi_ec_read(brightness_offset, &level))
return -EIO;
u8 lec = 0, lcmos = 0, level = 0;
level &= 0x7;
if (brightness_mode & 1) {
if (!acpi_ec_read(brightness_offset, &lec))
return -EIO;
lec &= 7;
level = lec;
};
if (brightness_mode & 2) {
lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
& TP_NVRAM_MASK_LEVEL_BRIGHTNESS)
>> TP_NVRAM_POS_LEVEL_BRIGHTNESS;
level = lcmos;
}
if (brightness_mode == 3 && lec != lcmos) {
printk(IBM_ERR
"CMOS NVRAM (%u) and EC (%u) do not agree "
"on display brightness level\n",
(unsigned int) lcmos,
(unsigned int) lec);
return -EIO;
}
return level;
}
static int brightness_set(int value)
{
int cmos_cmd, inc, i;
int current_value = brightness_get(NULL);
int cmos_cmd, inc, i, res;
int current_value;
if (value > 7)
return -EINVAL;
value &= 7;
res = mutex_lock_interruptible(&brightness_mutex);
if (res < 0)
return res;
current_value = brightness_get(NULL);
if (current_value < 0) {
res = current_value;
goto errout;
}
cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN;
cmos_cmd = value > current_value ?
TP_CMOS_BRIGHTNESS_UP :
TP_CMOS_BRIGHTNESS_DOWN;
inc = value > current_value ? 1 : -1;
res = 0;
for (i = current_value; i != value; i += inc) {
if (issue_thinkpad_cmos_command(cmos_cmd))
return -EIO;
if (!acpi_ec_write(brightness_offset, i + inc))
return -EIO;
if ((brightness_mode & 2) &&
issue_thinkpad_cmos_command(cmos_cmd)) {
res = -EIO;
goto errout;
}
if ((brightness_mode & 1) &&
!acpi_ec_write(brightness_offset, i + inc)) {
res = -EIO;
goto errout;;
}
}
return 0;
errout:
mutex_unlock(&brightness_mutex);
return res;
}
static int brightness_read(char *p)
......@@ -3273,20 +3657,19 @@ static int __init fan_init(struct ibm_init_struct *iibm)
* Enable for TP-1Y (T43), TP-78 (R51e),
* TP-76 (R52), TP-70 (T43, R52), which are known
* to be buggy. */
if (fan_control_initial_status == 0x07 &&
ibm_thinkpad_ec_found &&
((ibm_thinkpad_ec_found[0] == '1' &&
ibm_thinkpad_ec_found[1] == 'Y') ||
(ibm_thinkpad_ec_found[0] == '7' &&
(ibm_thinkpad_ec_found[1] == '6' ||
ibm_thinkpad_ec_found[1] == '8' ||
ibm_thinkpad_ec_found[1] == '0'))
)) {
printk(IBM_NOTICE
"fan_init: initial fan status is "
"unknown, assuming it is in auto "
"mode\n");
tp_features.fan_ctrl_status_undef = 1;
if (fan_control_initial_status == 0x07) {
switch (thinkpad_id.ec_model) {
case 0x5931: /* TP-1Y */
case 0x3837: /* TP-78 */
case 0x3637: /* TP-76 */
case 0x3037: /* TP-70 */
printk(IBM_NOTICE
"fan_init: initial fan status is "
"unknown, assuming it is in auto "
"mode\n");
tp_features.fan_ctrl_status_undef = 1;
;;
}
}
} else {
printk(IBM_ERR
......@@ -3474,7 +3857,7 @@ static void fan_watchdog_fire(struct work_struct *ignored)
static void fan_watchdog_reset(void)
{
static int fan_watchdog_active = 0;
static int fan_watchdog_active;
if (fan_control_access_mode == TPACPI_FAN_WR_NONE)
return;
......@@ -3877,7 +4260,7 @@ static struct ibm_struct fan_driver_data = {
****************************************************************************/
/* /proc support */
static struct proc_dir_entry *proc_dir = NULL;
static struct proc_dir_entry *proc_dir;
/* Subdriver registry */
static LIST_HEAD(tpacpi_all_drivers);
......@@ -4020,13 +4403,30 @@ static void ibm_exit(struct ibm_struct *ibm)
/* Probing */
static char *ibm_thinkpad_ec_found = NULL;
static char* __init check_dmi_for_ec(void)
static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
{
struct dmi_device *dev = NULL;
char ec_fw_string[18];
if (!tp)
return;
memset(tp, 0, sizeof(*tp));
if (dmi_name_in_vendors("IBM"))
tp->vendor = PCI_VENDOR_ID_IBM;
else if (dmi_name_in_vendors("LENOVO"))
tp->vendor = PCI_VENDOR_ID_LENOVO;
else
return;
tp->bios_version_str = kstrdup(dmi_get_system_info(DMI_BIOS_VERSION),
GFP_KERNEL);
if (!tp->bios_version_str)
return;
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
* X32 or newer, all Z series; Some models must have an
......@@ -4040,10 +4440,20 @@ static char* __init check_dmi_for_ec(void)
ec_fw_string) == 1) {
ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
return kstrdup(ec_fw_string, GFP_KERNEL);
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
tp->ec_model = ec_fw_string[0]
| (ec_fw_string[1] << 8);
break;
}
}
return NULL;
tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION),
GFP_KERNEL);
if (strnicmp(tp->model_str, "ThinkPad", 8) != 0) {
kfree(tp->model_str);
tp->model_str = NULL;
}
}
static int __init probe_for_thinkpad(void)
......@@ -4057,7 +4467,7 @@ static int __init probe_for_thinkpad(void)
* Non-ancient models have better DMI tagging, but very old models
* don't.
*/
is_thinkpad = dmi_name_in_vendors("ThinkPad");
is_thinkpad = (thinkpad_id.model_str != NULL);
/* ec is required because many other handles are relative to it */
IBM_ACPIHANDLE_INIT(ec);
......@@ -4073,7 +4483,7 @@ static int __init probe_for_thinkpad(void)
* false positives a damn great deal
*/
if (!is_thinkpad)
is_thinkpad = dmi_name_in_vendors("IBM");
is_thinkpad = (thinkpad_id.vendor == PCI_VENDOR_ID_IBM);
if (!is_thinkpad && !force_load)
return -ENODEV;
......@@ -4185,10 +4595,13 @@ static u32 dbg_level;
module_param_named(debug, dbg_level, uint, 0);
static int force_load;
module_param(force_load, int, 0);
module_param(force_load, bool, 0);
static int fan_control_allowed;
module_param_named(fan_control, fan_control_allowed, int, 0);
module_param_named(fan_control, fan_control_allowed, bool, 0);
static int brightness_mode;
module_param_named(brightness_mode, brightness_mode, int, 0);
#define IBM_PARAM(feature) \
module_param_call(feature, set_ibm_param, NULL, NULL, 0)
......@@ -4216,12 +4629,16 @@ static int __init thinkpad_acpi_module_init(void)
int ret, i;
/* Driver-level probe */
get_thinkpad_model_data(&thinkpad_id);
ret = probe_for_thinkpad();
if (ret)
if (ret) {
thinkpad_acpi_module_exit();
return ret;
}
/* Driver initialization */
ibm_thinkpad_ec_found = check_dmi_for_ec();
IBM_ACPIHANDLE_INIT(ecrd);
IBM_ACPIHANDLE_INIT(ecwr);
......@@ -4265,6 +4682,22 @@ static int __init thinkpad_acpi_module_init(void)
thinkpad_acpi_module_exit();
return ret;
}
tpacpi_inputdev = input_allocate_device();
if (!tpacpi_inputdev) {
printk(IBM_ERR "unable to allocate input device\n");
thinkpad_acpi_module_exit();
return -ENOMEM;
} else {
/* Prepare input device, but don't register */
tpacpi_inputdev->name = "ThinkPad Extra Buttons";
tpacpi_inputdev->phys = IBM_DRVR_NAME "/input0";
tpacpi_inputdev->id.bustype = BUS_HOST;
tpacpi_inputdev->id.vendor = (thinkpad_id.vendor) ?
thinkpad_id.vendor :
PCI_VENDOR_ID_IBM;
tpacpi_inputdev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
tpacpi_inputdev->id.version = TPACPI_HKEY_INPUT_VERSION;
}
for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
ret = ibm_init(&ibms_init[i]);
if (ret >= 0 && *ibms_init[i].param)
......@@ -4274,6 +4707,14 @@ static int __init thinkpad_acpi_module_init(void)
return ret;
}
}
ret = input_register_device(tpacpi_inputdev);
if (ret < 0) {
printk(IBM_ERR "unable to register input device\n");
thinkpad_acpi_module_exit();
return ret;
} else {
tp_features.input_device_registered = 1;
}
return 0;
}
......@@ -4290,6 +4731,13 @@ static void thinkpad_acpi_module_exit(void)
dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n");
if (tpacpi_inputdev) {
if (tp_features.input_device_registered)
input_unregister_device(tpacpi_inputdev);
else
input_free_device(tpacpi_inputdev);
}
if (tpacpi_hwmon)
hwmon_device_unregister(tpacpi_hwmon);
......@@ -4302,7 +4750,9 @@ static void thinkpad_acpi_module_exit(void)
if (proc_dir)
remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);
kfree(ibm_thinkpad_ec_found);
kfree(thinkpad_id.bios_version_str);
kfree(thinkpad_id.ec_version_str);
kfree(thinkpad_id.model_str);
}
module_init(thinkpad_acpi_module_init);
......
drivers/misc/thinkpad_acpi.h
View file @ 08e31686
......@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/nvram.h>
#include <linux/proc_fs.h>
#include <linux/sysfs.h>
#include <linux/backlight.h>
......@@ -39,6 +40,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/input.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
......@@ -48,6 +50,7 @@
#include <acpi/acpi_drivers.h>
#include <acpi/acnamesp.h>
#include <linux/pci_ids.h>
/****************************************************************************
* Main driver
......@@ -78,6 +81,11 @@
#define TP_CMOS_BRIGHTNESS_UP 4
#define TP_CMOS_BRIGHTNESS_DOWN 5
/* ThinkPad CMOS NVRAM constants */
#define TP_NVRAM_ADDR_BRIGHTNESS 0x5e
#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07
#define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
......@@ -98,9 +106,13 @@ static const char *str_supported(int is_supported);
#define vdbg_printk(a_dbg_level, format, arg...)
#endif
/* Input IDs */
#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM
#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */
#define TPACPI_HKEY_INPUT_VERSION 0x4101
/* ACPI HIDs */
#define IBM_HKEY_HID "IBM0068"
#define IBM_PCI_HID "PNP0A03"
/* ACPI helpers */
static int __must_check acpi_evalf(acpi_handle handle,
......@@ -161,6 +173,7 @@ static int parse_strtoul(const char *buf, unsigned long max,
static struct platform_device *tpacpi_pdev;
static struct class_device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
static struct input_dev *tpacpi_inputdev;
static int tpacpi_create_driver_attributes(struct device_driver *drv);
static void tpacpi_remove_driver_attributes(struct device_driver *drv);
......@@ -168,9 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv);
static int experimental;
static u32 dbg_level;
static int force_load;
static char *ibm_thinkpad_ec_found;
static char* check_dmi_for_ec(void);
static int thinkpad_acpi_module_init(void);
static void thinkpad_acpi_module_exit(void);
......@@ -197,6 +208,7 @@ struct ibm_struct {
int (*read) (char *);
int (*write) (char *);
void (*exit) (void);
void (*resume) (void);
struct list_head all_drivers;
......@@ -228,12 +240,29 @@ static struct {
u16 bluetooth:1;
u16 hotkey:1;
u16 hotkey_mask:1;
u16 hotkey_wlsw:1;
u16 light:1;
u16 light_status:1;
u16 wan:1;
u16 fan_ctrl_status_undef:1;
u16 input_device_registered:1;
} tp_features;
struct thinkpad_id_data {
unsigned int vendor; /* ThinkPad vendor:
* PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
u16 ec_model;
char *model_str;
};
static struct thinkpad_id_data thinkpad_id;
static struct list_head tpacpi_all_drivers;
static struct ibm_init_struct ibms_init[];
......@@ -300,6 +329,7 @@ static int bluetooth_write(char *buf);
static struct backlight_device *ibm_backlight_device;
static int brightness_offset = 0x31;
static int brightness_mode;
static int brightness_init(struct ibm_init_struct *iibm);
static void brightness_exit(void);
......@@ -415,14 +445,14 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc);
*/
static int hotkey_orig_status;
static int hotkey_orig_mask;
static u32 hotkey_orig_mask;
static struct mutex hotkey_mutex;
static int hotkey_init(struct ibm_init_struct *iibm);
static void hotkey_exit(void);
static int hotkey_get(int *status, int *mask);
static int hotkey_set(int status, int mask);
static int hotkey_get(int *status, u32 *mask);
static int hotkey_set(int status, u32 mask);
static void hotkey_notify(struct ibm_struct *ibm, u32 event);
static int hotkey_read(char *p);
static int hotkey_write(char *buf);
......
include/linux/pci_ids.h
View file @ 08e31686
......@@ -2040,6 +2040,8 @@
#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
#define PCI_VENDOR_ID_LENOVO 0x17aa
#define PCI_VENDOR_ID_ARECA 0x17d3
#define PCI_DEVICE_ID_ARECA_1110 0x1110
#define PCI_DEVICE_ID_ARECA_1120 0x1120
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7