mfd: Add AAT2870 mfd driver

Add mfd core driver for AnalogicTech AAT2870.
The AAT2870 is communication through I2C and contains backlight and
regulator components.
Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/Kconfig

@@ -760,6 +760,16 @@ config MFD_PM8XXX_IRQ
 config TPS65911_COMPARATOR
 	tristate
 
+config MFD_AAT2870_CORE
+	bool "Support for the AnalogicTech AAT2870"
+	select MFD_CORE
+	depends on I2C=y && GPIOLIB
+	help
+	  If you say yes here you get support for the AAT2870.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"

drivers/mfd/Makefile

@@ -101,3 +101,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
+obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o

include/linux/mfd/aat2870.h

+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN	0x00
+#define AAT2870_BLM		0x01
+#define AAT2870_BLS		0x02
+#define AAT2870_BL1		0x03
+#define AAT2870_BL2		0x04
+#define AAT2870_BL3		0x05
+#define AAT2870_BL4		0x06
+#define AAT2870_BL5		0x07
+#define AAT2870_BL6		0x08
+#define AAT2870_BL7		0x09
+#define AAT2870_BL8		0x0A
+#define AAT2870_FLR		0x0B
+#define AAT2870_FM		0x0C
+#define AAT2870_FS		0x0D
+#define AAT2870_ALS_CFG0	0x0E
+#define AAT2870_ALS_CFG1	0x0F
+#define AAT2870_ALS_CFG2	0x10
+#define AAT2870_AMB		0x11
+#define AAT2870_ALS0		0x12
+#define AAT2870_ALS1		0x13
+#define AAT2870_ALS2		0x14
+#define AAT2870_ALS3		0x15
+#define AAT2870_ALS4		0x16
+#define AAT2870_ALS5		0x17
+#define AAT2870_ALS6		0x18
+#define AAT2870_ALS7		0x19
+#define AAT2870_ALS8		0x1A
+#define AAT2870_ALS9		0x1B
+#define AAT2870_ALSA		0x1C
+#define AAT2870_ALSB		0x1D
+#define AAT2870_ALSC		0x1E
+#define AAT2870_ALSD		0x1F
+#define AAT2870_ALSE		0x20
+#define AAT2870_ALSF		0x21
+#define AAT2870_SUB_SET		0x22
+#define AAT2870_SUB_CTRL	0x23
+#define AAT2870_LDO_AB		0x24
+#define AAT2870_LDO_CD		0x25
+#define AAT2870_LDO_EN		0x26
+#define AAT2870_REG_NUM		0x27
+
+/* Device IDs */
+enum aat2870_id {
+	AAT2870_ID_BL,
+	AAT2870_ID_LDOA,
+	AAT2870_ID_LDOB,
+	AAT2870_ID_LDOC,
+	AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1		0x01
+#define AAT2870_BL_CH2		0x02
+#define AAT2870_BL_CH3		0x04
+#define AAT2870_BL_CH4		0x08
+#define AAT2870_BL_CH5		0x10
+#define AAT2870_BL_CH6		0x20
+#define AAT2870_BL_CH7		0x40
+#define AAT2870_BL_CH8		0x80
+#define AAT2870_BL_CH_ALL	0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+	AAT2870_CURRENT_0_45,
+	AAT2870_CURRENT_0_90,
+	AAT2870_CURRENT_1_80,
+	AAT2870_CURRENT_2_70,
+	AAT2870_CURRENT_3_60,
+	AAT2870_CURRENT_4_50,
+	AAT2870_CURRENT_5_40,
+	AAT2870_CURRENT_6_30,
+	AAT2870_CURRENT_7_20,
+	AAT2870_CURRENT_8_10,
+	AAT2870_CURRENT_9_00,
+	AAT2870_CURRENT_9_90,
+	AAT2870_CURRENT_10_8,
+	AAT2870_CURRENT_11_7,
+	AAT2870_CURRENT_12_6,
+	AAT2870_CURRENT_13_5,
+	AAT2870_CURRENT_14_4,
+	AAT2870_CURRENT_15_3,
+	AAT2870_CURRENT_16_2,
+	AAT2870_CURRENT_17_1,
+	AAT2870_CURRENT_18_0,
+	AAT2870_CURRENT_18_9,
+	AAT2870_CURRENT_19_8,
+	AAT2870_CURRENT_20_7,
+	AAT2870_CURRENT_21_6,
+	AAT2870_CURRENT_22_5,
+	AAT2870_CURRENT_23_4,
+	AAT2870_CURRENT_24_3,
+	AAT2870_CURRENT_25_2,
+	AAT2870_CURRENT_26_1,
+	AAT2870_CURRENT_27_0,
+	AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+	bool readable;
+	bool writeable;
+	u8 value;
+};
+
+struct aat2870_data {
+	struct device *dev;
+	struct i2c_client *client;
+
+	struct mutex io_lock;
+	struct aat2870_register *reg_cache; /* register cache */
+	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+	bool is_enable;
+
+	/* init and uninit for platform specified */
+	int (*init)(struct aat2870_data *aat2870);
+	void (*uninit)(struct aat2870_data *aat2870);
+
+	/* i2c io funcntions */
+	int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+	int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+	int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val);
+
+	/* for debugfs */
+	struct dentry *dentry_root;
+	struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+	int id;
+	const char *name;
+	void *platform_data;
+};
+
+struct aat2870_platform_data {
+	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+	struct aat2870_subdev_info *subdevs;
+	int num_subdevs;
+
+	/* init and uninit for platform specified */
+	int (*init)(struct aat2870_data *aat2870);
+	void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+	/* backlight channels, default is AAT2870_BL_CH_ALL */
+	int channels;
+	/* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+	int max_current;
+	/* maximum brightness, default is 255 */
+	int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */