ARM: nomadik: add I2C devices to the device tree

This adds the GPIO-based I2C devices to the Nomadik device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -137,6 +137,55 @@ ethernet@300 {
 		};
 	};
 
+	/* I2C0 connected to the STw4811 power management chip */
+	i2c0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpio1 31 0>, /* sda */
+			<&gpio1 30 0>; /* scl */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		stw4811@2d {
+			   compatible = "st,stw4811";
+			   reg = <0x2d>;
+		};
+	};
+
+	/* I2C1 connected to various sensors */
+	i2c1 {
+		compatible = "i2c-gpio";
+		gpios = <&gpio1 22 0>, /* sda */
+			<&gpio1 21 0>; /* scl */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		camera@2d {
+			   compatible = "st,camera";
+			   reg = <0x10>;
+		};
+		stw5095@1a {
+			   compatible = "st,stw5095";
+			   reg = <0x1a>;
+		};
+		lis3lv02dl@1d {
+			   compatible = "st,lis3lv02dl";
+			   reg = <0x1d>;
+		};
+	};
+
+	/* I2C2 connected to the USB portions of the STw4811 only */
+	i2c2 {
+		compatible = "i2c-gpio";
+		gpios = <&gpio2 10 0>, /* sda */
+			<&gpio2 9 0>; /* scl */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		stw4811@2d {
+			   compatible = "st,stw4811-usb";
+			   reg = <0x2d>;
+		};
+	};
+
 	amba {
 		compatible = "arm,amba-bus";
 		#address-cells = <1>;