Merge branch 'omap4-ehci-for-greg' of...

Merge branch 'omap4-ehci-for-greg' of git://dev.omapzoom.org/pub/scm/anand/linux-omap-usb into usb-next

* 'omap4-ehci-for-greg' of git://dev.omapzoom.org/pub/scm/anand/linux-omap-usb:
  omap4: 4430sdp: enable the ehci port on 4430SDP
  arm: omap4: select USB_ARCH_HAS_EHCI
  arm: omap4: usb: add platform init code for EHCI
  arm: omap4: add USBHOST and related base addresses
  usb: ehci-omap: Add OMAP4 support
  omap: usb: ehci: introduce HSIC mode
  usb: ehci-omap: add helpers for checking port mode
  usb: ehci-omap: use clkdev aliases for functional clocks
  omap: clock: add clkdev aliases for EHCI clocks
  usb: ehci: introduce CONFIG_USB_EHCI_HCD_OMAP
  usb: ehci-omap: don't hard-code TLL channel count
  usb: ehci-omap: update clock names to be more generic

arch/arm/mach-omap2/Kconfig

@@ -44,6 +44,7 @@ config ARCH_OMAP4
 	select ARM_GIC
 	select PL310_ERRATA_588369
 	select ARM_ERRATA_720789
+	select USB_ARCH_HAS_EHCI
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2

arch/arm/mach-omap2/board-4430sdp.c

@@ -42,6 +42,7 @@
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
+#define OMAP4SDP_MDM_PWR_EN_GPIO	157
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
@@ -225,6 +226,16 @@ static void __init omap_4430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset	= false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL,
+};
+
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_PERIPHERAL,
@@ -514,6 +525,15 @@ static void __init omap_4430sdp_init(void)
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
+
+	/* Power on the ULPI PHY */
+	if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) {
+		/* FIXME: Assumes pad is already muxed for GPIO mode */
+		gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
+		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
+	}
+	usb_ehci_init(&ehci_pdata);
+
 	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
 	usb_nop_xceiv_register();
 	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3278,6 +3278,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK("ehci-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
@@ -3313,6 +3314,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2 | CK_AM35XX),
+	CLK("ehci-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_343X),
@@ -3358,8 +3360,11 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2 | CK_AM35XX),
+	CLK("ehci-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2 | CK_AM35XX),
+	CLK("ehci-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2 | CK_AM35XX),
+	CLK("ehci-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),

arch/arm/mach-omap2/clock44xx_data.c

@@ -2937,6 +2937,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK("ehci-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
@@ -2948,6 +2949,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("ehci-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("ehci-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
 	CLK("musb_hdrc",	"ick",				&usb_otg_hs_ick,	CK_443X),
@@ -2956,6 +2959,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("ehci-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("ehci-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),

arch/arm/mach-omap2/usb-ehci.c

@@ -34,22 +34,15 @@
 
 static struct resource ehci_resources[] = {
 	{
-		.start	= OMAP34XX_EHCI_BASE,
-		.end	= OMAP34XX_EHCI_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= OMAP34XX_UHH_CONFIG_BASE,
-		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= OMAP34XX_USBTLL_BASE,
-		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{         /* general IRQ */
-		.start   = INT_34XX_EHCI_IRQ,
 		.flags   = IORESOURCE_IRQ,
 	}
 };
@@ -214,13 +207,148 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
+static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("usbb1_ulpiphy_stp",
+			OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("usbb1_ulpiphy_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("usbb1_ulpitll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("usbb1_ulpitll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	default:
+			break;
+	}
+	switch (port_mode[1]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("usbb2_ulpiphy_stp",
+			OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("usbb2_ulpiphy_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("usbb2_ulpitll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("usbb2_ulpitll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	default:
+			break;
+	}
+}
+
 void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
 	/* Setup Pin IO MUX for EHCI */
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx()) {
+		ehci_resources[0].start	= OMAP34XX_EHCI_BASE;
+		ehci_resources[0].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
+		ehci_resources[1].start	= OMAP34XX_UHH_CONFIG_BASE;
+		ehci_resources[1].end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		ehci_resources[2].start	= OMAP34XX_USBTLL_BASE;
+		ehci_resources[2].end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1;
+		ehci_resources[3].start = INT_34XX_EHCI_IRQ;
 		setup_ehci_io_mux(pdata->port_mode);
+	} else if (cpu_is_omap44xx()) {
+		ehci_resources[0].start	= OMAP44XX_HSUSB_EHCI_BASE;
+		ehci_resources[0].end	= OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
+		ehci_resources[1].start	= OMAP44XX_UHH_CONFIG_BASE;
+		ehci_resources[1].end	= OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1;
+		ehci_resources[2].start	= OMAP44XX_USBTLL_BASE;
+		ehci_resources[2].end	= OMAP44XX_USBTLL_BASE + SZ_4K - 1;
+		ehci_resources[3].start = OMAP44XX_IRQ_EHCI;
+		setup_4430ehci_io_mux(pdata->port_mode);
+	}
 
 	if (platform_device_register(&ehci_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");

arch/arm/plat-omap/include/plat/omap44xx.h

@@ -52,5 +52,10 @@
 #define OMAP4_MMU1_BASE			0x55082000
 #define OMAP4_MMU2_BASE			0x4A066000
 
+#define OMAP44XX_USBTLL_BASE		(L4_44XX_BASE + 0x62000)
+#define OMAP44XX_UHH_CONFIG_BASE	(L4_44XX_BASE + 0x64000)
+#define OMAP44XX_HSUSB_OHCI_BASE	(L4_44XX_BASE + 0x64800)
+#define OMAP44XX_HSUSB_EHCI_BASE	(L4_44XX_BASE + 0x64C00)
+
 #endif /* __ASM_ARCH_OMAP44XX_H */
 

arch/arm/plat-omap/include/plat/usb.h

@@ -11,6 +11,7 @@ enum ehci_hcd_omap_mode {
 	EHCI_HCD_OMAP_MODE_UNKNOWN,
 	EHCI_HCD_OMAP_MODE_PHY,
 	EHCI_HCD_OMAP_MODE_TLL,
+	EHCI_HCD_OMAP_MODE_HSIC,
 };
 
 enum ohci_omap3_port_mode {

drivers/usb/host/Kconfig

@@ -133,6 +133,14 @@ config USB_EHCI_MXC
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
+config USB_EHCI_HCD_OMAP
+	bool "EHCI support for OMAP3 and later chips"
+	depends on USB_EHCI_HCD && ARCH_OMAP
+	default y
+	--- help ---
+	  Enables support for the on-chip EHCI controller on
+	  OMAP3 and later chips.
+
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on USB_EHCI_HCD && PPC_OF

drivers/usb/host/ehci-hcd.c

@@ -1171,7 +1171,7 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
 
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_USB_EHCI_HCD_OMAP
 #include "ehci-omap.c"
 #define        PLATFORM_DRIVER         ehci_hcd_omap_driver
 #endif

drivers/usb/host/ehci-omap.c

 /*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
  *	Author: Vikram Pandita <vikram.pandita@ti.com>
+ *	Author: Anand Gadiyar <gadiyar@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
  *	- add kernel-doc
  *	- enable AUTOIDLE
  *	- add suspend/resume
  *	- move workarounds to board-files
+ *	- factor out code common to OHCI
+ *	- add HSIC and TLL support
+ *	- convert to use hwmod and runtime PM
  */
 
 #include <linux/platform_device.h>
@@ -114,6 +118,23 @@
 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
 
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
 #define	OMAP_UHH_DEBUG_CSR				(0x44)
 
 /* EHCI Register Set */
@@ -127,6 +148,17 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1	0x00000010	/* OMAP3 */
+#define OMAP_EHCI_REV2	0x50700100	/* OMAP4 */
+
+#define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+
 /*-------------------------------------------------------------------------*/
 
 static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
 	struct device		*dev;
 
 	struct clk		*usbhost_ick;
-	struct clk		*usbhost2_120m_fck;
-	struct clk		*usbhost1_48m_fck;
+	struct clk		*usbhost_hs_fck;
+	struct clk		*usbhost_fs_fck;
 	struct clk		*usbtll_fck;
 	struct clk		*usbtll_ick;
+	struct clk		*xclk60mhsp1_ck;
+	struct clk		*xclk60mhsp2_ck;
+	struct clk		*utmi_p1_fck;
+	struct clk		*utmi_p2_fck;
 
 	/* FIXME the following two workarounds are
 	 * board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
 	/* phy reset workaround */
 	int			phy_reset;
 
+	/* IP revision */
+	u32			omap_ehci_rev;
+
 	/* desired phy_mode: TLL, PHY */
 	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
 
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
 
 /*-------------------------------------------------------------------------*/
 
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+				u8 tll_channel_count)
 {
 	unsigned reg;
 	int i;
 
 	/* Program the 3 TLL channels upfront */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
 	ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
 
 	/* Enable channels now */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbhost_ick);
 
-	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
-	if (IS_ERR(omap->usbhost2_120m_fck)) {
-		ret = PTR_ERR(omap->usbhost2_120m_fck);
+	omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
 		goto err_host_120m_fck;
 	}
-	clk_enable(omap->usbhost2_120m_fck);
+	clk_enable(omap->usbhost_hs_fck);
 
-	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
-	if (IS_ERR(omap->usbhost1_48m_fck)) {
-		ret = PTR_ERR(omap->usbhost1_48m_fck);
+	omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
 		goto err_host_48m_fck;
 	}
-	clk_enable(omap->usbhost1_48m_fck);
+	clk_enable(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		/* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbtll_ick);
 
+	omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+						OMAP_UHH_REVISION);
+	dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+					omap->omap_ehci_rev);
+
+	/*
+	 * Enable per-port clocks as needed (newer controllers only).
+	 * - External ULPI clock for PHY mode
+	 * - Internal clocks for TLL and HSIC modes (TODO)
+	 */
+	if (is_omap_ehci_rev2(omap)) {
+		switch (omap->port_mode[0]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp1_ck = clk_get(omap->dev,
+							"xclk60mhsp1_ck");
+			if (IS_ERR(omap->xclk60mhsp1_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp1_ck);
+				dev_err(omap->dev,
+					"Unable to get Port1 ULPI clock\n");
+			}
+
+			omap->utmi_p1_fck = clk_get(omap->dev,
+							"utmi_p1_gfclk");
+			if (IS_ERR(omap->utmi_p1_fck)) {
+				ret = PTR_ERR(omap->utmi_p1_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p1_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P1 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+		switch (omap->port_mode[1]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp2_ck = clk_get(omap->dev,
+							"xclk60mhsp2_ck");
+			if (IS_ERR(omap->xclk60mhsp2_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp2_ck);
+				dev_err(omap->dev,
+					"Unable to get Port2 ULPI clock\n");
+			}
+
+			omap->utmi_p2_fck = clk_get(omap->dev,
+							"utmi_p2_gfclk");
+			if (IS_ERR(omap->utmi_p2_fck)) {
+				ret = PTR_ERR(omap->utmi_p2_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p2_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P2 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+	}
+
+
 	/* perform TLL soft reset, and wait until reset is complete */
 	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
 			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Put UHH in NoIdle/NoStandby mode */
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	if (is_omap_ehci_rev1(omap)) {
 		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
 				| OMAP_UHH_SYSCONFIG_SIDLEMODE
 				| OMAP_UHH_SYSCONFIG_CACTIVITY
 				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
 		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
 
+
+	} else if (is_omap_ehci_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
 
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,6 +498,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
+	if (is_omap_ehci_rev1(omap)) {
 		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
 		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
@@ -386,30 +509,45 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		/* Bypass the TLL module for PHY mode operation */
 		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
 			dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-		if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
-			(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
-				(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
+			if (is_ehci_phy_mode(omap->port_mode[0]) ||
+				is_ehci_phy_mode(omap->port_mode[1]) ||
+					is_ehci_phy_mode(omap->port_mode[2]))
 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 			else
 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 		} else {
 			dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+			if (is_ehci_phy_mode(omap->port_mode[0]))
 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-		else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+			else if (is_ehci_tll_mode(omap->port_mode[0]))
 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+			if (is_ehci_phy_mode(omap->port_mode[1]))
 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-		else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+			else if (is_ehci_tll_mode(omap->port_mode[1]))
 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
+			if (is_ehci_phy_mode(omap->port_mode[2]))
 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+			else if (is_ehci_tll_mode(omap->port_mode[2]))
 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_ehci_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_tll_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
 
+		if (is_ehci_tll_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
 	}
+
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
 		/* Enable UTMI mode for required TLL channels */
-		omap_usb_utmi_init(omap, tll_ch_mask);
+		omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
 	}
 
 	if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	return 0;
 
 err_sys_status:
+	clk_disable(omap->utmi_p2_fck);
+	clk_put(omap->utmi_p2_fck);
+	clk_disable(omap->xclk60mhsp2_ck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_put(omap->utmi_p1_fck);
+	clk_disable(omap->xclk60mhsp1_ck);
+	clk_put(omap->xclk60mhsp1_ck);
 	clk_disable(omap->usbtll_ick);
 	clk_put(omap->usbtll_ick);
 
@@ -472,8 +618,8 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	clk_put(omap->usbtll_fck);
 
 err_tll_fck:
-	clk_disable(omap->usbhost1_48m_fck);
-	clk_put(omap->usbhost1_48m_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 
 err_host_48m_fck:
-	clk_disable(omap->usbhost2_120m_fck);
-	clk_put(omap->usbhost2_120m_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_hs_fck);
 
 err_host_120m_fck:
 	clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Reset OMAP modules for insmod/rmmod to work */
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_ehci_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
 			OMAP_UHH_SYSCONFIG_SOFTRESET);
 	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
 				& (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbhost_ick = NULL;
 	}
 
-	if (omap->usbhost1_48m_fck != NULL) {
-		clk_disable(omap->usbhost1_48m_fck);
-		clk_put(omap->usbhost1_48m_fck);
-		omap->usbhost1_48m_fck = NULL;
+	if (omap->usbhost_fs_fck != NULL) {
+		clk_disable(omap->usbhost_fs_fck);
+		clk_put(omap->usbhost_fs_fck);
+		omap->usbhost_fs_fck = NULL;
 	}
 
-	if (omap->usbhost2_120m_fck != NULL) {
-		clk_disable(omap->usbhost2_120m_fck);
-		clk_put(omap->usbhost2_120m_fck);
-		omap->usbhost2_120m_fck = NULL;
+	if (omap->usbhost_hs_fck != NULL) {
+		clk_disable(omap->usbhost_hs_fck);
+		clk_put(omap->usbhost_hs_fck);
+		omap->usbhost_hs_fck = NULL;
 	}
 
 	if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbtll_ick = NULL;
 	}
 
+	if (is_omap_ehci_rev2(omap)) {
+		if (omap->xclk60mhsp1_ck != NULL) {
+			clk_disable(omap->xclk60mhsp1_ck);
+			clk_put(omap->xclk60mhsp1_ck);
+			omap->xclk60mhsp1_ck = NULL;
+		}
+
+		if (omap->utmi_p1_fck != NULL) {
+			clk_disable(omap->utmi_p1_fck);
+			clk_put(omap->utmi_p1_fck);
+			omap->utmi_p1_fck = NULL;
+		}
+
+		if (omap->xclk60mhsp2_ck != NULL) {
+			clk_disable(omap->xclk60mhsp2_ck);
+			clk_put(omap->xclk60mhsp2_ck);
+			omap->xclk60mhsp2_ck = NULL;
+		}
+
+		if (omap->utmi_p2_fck != NULL) {
+			clk_disable(omap->utmi_p2_fck);
+			clk_put(omap->utmi_p2_fck);
+			omap->utmi_p2_fck = NULL;
+		}
+	}
+
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
 			gpio_free(omap->reset_gpio_port[0]);