Skip to content

L
linux
Commit 0afabe90 authored by Kenji Kaneshige's avatar Kenji Kaneshige Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] shpchp: cleanup bus speed handling 

The code related to handling bus speed in SHPCHP driver is
unnecessarily complex. This patch cleans up and simplify that.
Signed-off-by: default avatarKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 3c990e92
Hide whitespace changes
Inline Side-by-side
Showing with 189 additions and 429 deletions
drivers/pci/hotplug/shpchp_ctrl.c
View file @ 0afabe90
......@@ -198,7 +198,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
err("%s: Issue of set bus speed mode command failed\n",
__FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
return rc;
......@@ -209,33 +210,26 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
enum pci_bus_speed msp)
{
int rc = 0;
if (flag != 0) { /* Other slots on the same bus are occupied */
if ( asp < bsp ) {
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
return WRONG_BUS_FREQUENCY;
/*
* If other slots on the same bus are occupied, we cannot
* change the bus speed.
*/
if (flag) {
if (asp < bsp) {
err("%s: speed of bus %x and adapter %x mismatch\n",
__FUNCTION__, bsp, asp);
rc = WRONG_BUS_FREQUENCY;
}
return rc;
}
if (asp < msp) {
if (bsp != asp)
rc = change_bus_speed(ctrl, pslot, asp);
} else {
/* Other slots on the same bus are empty */
if (msp == bsp) {
/* if adapter_speed >= bus_speed, do nothing */
if (asp < bsp) {
/*
* Try to lower bus speed to accommodate the adapter if other slots
* on the same controller are empty
*/
if ((rc = change_bus_speed(ctrl, pslot, asp)))
return rc;
}
} else {
if (asp < msp) {
if ((rc = change_bus_speed(ctrl, pslot, asp)))
return rc;
} else {
if ((rc = change_bus_speed(ctrl, pslot, msp)))
return rc;
}
}
if (bsp != msp)
rc = change_bus_speed(ctrl, pslot, msp);
}
return rc;
}
......@@ -252,8 +246,7 @@ static int board_added(struct slot *p_slot)
u8 hp_slot;
u8 slots_not_empty = 0;
int rc = 0;
enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
u8 pi, mode;
enum pci_bus_speed asp, bsp, msp;
struct controller *ctrl = p_slot->ctrl;
hp_slot = p_slot->device - ctrl->slot_device_offset;
......@@ -285,109 +278,36 @@ static int board_added(struct slot *p_slot)
}
}
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
/* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
/* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
/* 0xd = PCI-X 133 Mhz 533 */
/* This encoding is different from the one used in cur_bus_speed & */
/* max_bus_speed */
if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
err("%s: Can't get adapter speed or bus mode mismatch\n",
__FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
if (rc) {
err("%s: Can't get bus operation speed\n", __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
if (rc) {
err("%s: Can't get max bus operation speed\n", __FUNCTION__);
max_bus_speed = bus_speed;
}
if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
pi = 1;
msp = bsp;
}
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
slots_not_empty = 1;
dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
slots_not_empty, pi);
dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
adapter_speed, bus_speed, max_bus_speed);
if (pi == 2) {
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
mode = 0;
}
dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
"max_bus_speed %d\n", __FUNCTION__, slots_not_empty, asp,
bsp, msp);
switch (adapter_speed) {
case PCI_SPEED_133MHz_PCIX_533:
case PCI_SPEED_133MHz_PCIX_266:
if ((bus_speed != adapter_speed) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
break;
case PCI_SPEED_133MHz_PCIX_ECC:
case PCI_SPEED_133MHz_PCIX:
if (mode) { /* Bus - Mode 1 ECC */
if ((bus_speed != 0x7) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
} else {
if ((bus_speed != 0x4) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
break;
case PCI_SPEED_66MHz_PCIX_ECC:
case PCI_SPEED_66MHz_PCIX:
if (mode) { /* Bus - Mode 1 ECC */
if ((bus_speed != 0x5) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
} else {
if ((bus_speed != 0x2) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
break;
case PCI_SPEED_66MHz:
if ((bus_speed != 0x1) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
break;
case PCI_SPEED_33MHz:
if (bus_speed > 0x0) {
if (slots_not_empty == 0) {
if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
return rc;
} else {
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
return WRONG_BUS_FREQUENCY;
}
}
break;
default:
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
return WRONG_BUS_FREQUENCY;
}
} else {
/* If adpater_speed == bus_speed, nothing to do here */
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
if ((adapter_speed != bus_speed) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
if (rc)
return rc;
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
......
drivers/pci/hotplug/shpchp_hpc.c
View file @ 0afabe90
......@@ -82,31 +82,6 @@
#define SLOT_100MHZ_PCIX_533 0x0f000000
#define SLOT_133MHZ_PCIX_533 0xf0000000
/* Secondary Bus Configuration Register */
/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */
#define PCI_33MHZ 0x0
#define PCI_66MHZ 0x1
#define PCIX_66MHZ 0x2
#define PCIX_100MHZ 0x3
#define PCIX_133MHZ 0x4
/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */
#define PCI_33MHZ 0x0
#define PCI_66MHZ 0x1
#define PCIX_66MHZ 0x2
#define PCIX_100MHZ 0x3
#define PCIX_133MHZ 0x4
#define PCIX_66MHZ_ECC 0x5
#define PCIX_100MHZ_ECC 0x6
#define PCIX_133MHZ_ECC 0x7
#define PCIX_66MHZ_266 0x9
#define PCIX_100MHZ_266 0xa
#define PCIX_133MHZ_266 0xb
#define PCIX_66MHZ_533 0x11
#define PCIX_100MHZ_533 0x12
#define PCIX_133MHZ_533 0x13
/* Slot Configuration */
#define SLOT_NUM 0x0000001F
#define FIRST_DEV_NUM 0x00001F00
......@@ -548,81 +523,41 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
{
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status, sec_bus_status;
u8 m66_cap, pcix_cap, pi;
int retval = 0;
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot);
u8 pcix_cap = (slot_reg >> 12) & 7;
u8 m66_cap = (slot_reg >> 9) & 1;
DBG_ENTER_ROUTINE
if (!slot->ctrl->hpc_ctlr_handle) {
err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
return -1;
}
if (slot->hp_slot >= php_ctlr->num_slots) {
err("%s: Invalid HPC slot number!\n", __FUNCTION__);
return -1;
}
pi = readb(php_ctlr->creg + PROG_INTERFACE);
slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg);
slot_status = (u16) slot_reg;
dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status);
sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
pcix_cap = (u8) ((slot_status & 0x3000) >> 12);
dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap);
m66_cap = (u8) ((slot_status & 0x0200) >> 9);
dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap);
dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
__FUNCTION__, slot_reg, pcix_cap, m66_cap);
if (pi == 2) {
switch (pcix_cap) {
case 0:
*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
break;
case 1:
*value = PCI_SPEED_66MHz_PCIX;
break;
case 3:
*value = PCI_SPEED_133MHz_PCIX;
break;
case 4:
*value = PCI_SPEED_133MHz_PCIX_266;
break;
case 5:
*value = PCI_SPEED_133MHz_PCIX_533;
break;
case 2: /* Reserved */
default:
*value = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
break;
}
} else {
switch (pcix_cap) {
case 0:
*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
break;
case 1:
*value = PCI_SPEED_66MHz_PCIX;
break;
case 3:
*value = PCI_SPEED_133MHz_PCIX;
break;
case 2: /* Reserved */
default:
*value = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
break;
}
switch (pcix_cap) {
case 0x0:
*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
break;
case 0x1:
*value = PCI_SPEED_66MHz_PCIX;
break;
case 0x3:
*value = PCI_SPEED_133MHz_PCIX;
break;
case 0x4:
*value = PCI_SPEED_133MHz_PCIX_266;
break;
case 0x5:
*value = PCI_SPEED_133MHz_PCIX_533;
break;
case 0x2:
default:
*value = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
break;
}
dbg("Adapter speed = %d\n", *value);
DBG_LEAVE_ROUTINE
return retval;
}
......@@ -965,98 +900,66 @@ static int hpc_slot_disable(struct slot * slot)
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
{
u8 slot_cmd;
u8 pi;
int retval = 0;
int retval;
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 pi, cmd;
DBG_ENTER_ROUTINE
if (!slot->ctrl->hpc_ctlr_handle) {
err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
return -1;
}
pi = readb(php_ctlr->creg + PROG_INTERFACE);
if (pi == 1) {
switch (value) {
case 0:
slot_cmd = SETA_PCI_33MHZ;
break;
case 1:
slot_cmd = SETA_PCI_66MHZ;
break;
case 2:
slot_cmd = SETA_PCIX_66MHZ;
break;
case 3:
slot_cmd = SETA_PCIX_100MHZ;
break;
case 4:
slot_cmd = SETA_PCIX_133MHZ;
break;
default:
slot_cmd = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
return retval;
}
} else {
switch (value) {
case 0:
slot_cmd = SETB_PCI_33MHZ;
break;
case 1:
slot_cmd = SETB_PCI_66MHZ;
break;
case 2:
slot_cmd = SETB_PCIX_66MHZ_PM;
break;
case 3:
slot_cmd = SETB_PCIX_100MHZ_PM;
break;
case 4:
slot_cmd = SETB_PCIX_133MHZ_PM;
break;
case 5:
slot_cmd = SETB_PCIX_66MHZ_EM;
break;
case 6:
slot_cmd = SETB_PCIX_100MHZ_EM;
break;
case 7:
slot_cmd = SETB_PCIX_133MHZ_EM;
break;
case 8:
slot_cmd = SETB_PCIX_66MHZ_266;
break;
case 0x9:
slot_cmd = SETB_PCIX_100MHZ_266;
break;
case 0xa:
slot_cmd = SETB_PCIX_133MHZ_266;
break;
case 0xb:
slot_cmd = SETB_PCIX_66MHZ_533;
break;
case 0xc:
slot_cmd = SETB_PCIX_100MHZ_533;
break;
case 0xd:
slot_cmd = SETB_PCIX_133MHZ_533;
break;
default:
slot_cmd = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
return retval;
}
if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
return -EINVAL;
switch (value) {
case PCI_SPEED_33MHz:
cmd = SETA_PCI_33MHZ;
break;
case PCI_SPEED_66MHz:
cmd = SETA_PCI_66MHZ;
break;
case PCI_SPEED_66MHz_PCIX:
cmd = SETA_PCIX_66MHZ;
break;
case PCI_SPEED_100MHz_PCIX:
cmd = SETA_PCIX_100MHZ;
break;
case PCI_SPEED_133MHz_PCIX:
cmd = SETA_PCIX_133MHZ;
break;
case PCI_SPEED_66MHz_PCIX_ECC:
cmd = SETB_PCIX_66MHZ_EM;
break;
case PCI_SPEED_100MHz_PCIX_ECC:
cmd = SETB_PCIX_100MHZ_EM;
break;
case PCI_SPEED_133MHz_PCIX_ECC:
cmd = SETB_PCIX_133MHZ_EM;
break;
case PCI_SPEED_66MHz_PCIX_266:
cmd = SETB_PCIX_66MHZ_266;
break;
case PCI_SPEED_100MHz_PCIX_266:
cmd = SETB_PCIX_100MHZ_266;
break;
case PCI_SPEED_133MHz_PCIX_266:
cmd = SETB_PCIX_133MHZ_266;
break;
case PCI_SPEED_66MHz_PCIX_533:
cmd = SETB_PCIX_66MHZ_533;
break;
case PCI_SPEED_100MHz_PCIX_533:
cmd = SETB_PCIX_100MHZ_533;
break;
case PCI_SPEED_133MHz_PCIX_533:
cmd = SETB_PCIX_133MHZ_533;
break;
default:
return -EINVAL;
}
retval = shpc_write_cmd(slot, 0, slot_cmd);
if (retval) {
retval = shpc_write_cmd(slot, 0, cmd);
if (retval)
err("%s: Write command failed!\n", __FUNCTION__);
return -1;
}
DBG_LEAVE_ROUTINE
return retval;
......@@ -1163,64 +1066,43 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
{
int retval = 0;
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
int retval = 0;
u8 pi;
u32 slot_avail1, slot_avail2;
u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
DBG_ENTER_ROUTINE
if (!slot->ctrl->hpc_ctlr_handle) {
err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
return -1;
}
if (slot->hp_slot >= php_ctlr->num_slots) {
err("%s: Invalid HPC slot number!\n", __FUNCTION__);
return -1;
}
pi = readb(php_ctlr->creg + PROG_INTERFACE);
slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
if (pi == 2) {
if (slot_avail2 & SLOT_133MHZ_PCIX_533)
bus_speed = PCIX_133MHZ_533;
bus_speed = PCI_SPEED_133MHz_PCIX_533;
else if (slot_avail2 & SLOT_100MHZ_PCIX_533)
bus_speed = PCIX_100MHZ_533;
bus_speed = PCI_SPEED_100MHz_PCIX_533;
else if (slot_avail2 & SLOT_66MHZ_PCIX_533)
bus_speed = PCIX_66MHZ_533;
bus_speed = PCI_SPEED_66MHz_PCIX_533;
else if (slot_avail2 & SLOT_133MHZ_PCIX_266)
bus_speed = PCIX_133MHZ_266;
bus_speed = PCI_SPEED_133MHz_PCIX_266;
else if (slot_avail2 & SLOT_100MHZ_PCIX_266)
bus_speed = PCIX_100MHZ_266;
bus_speed = PCI_SPEED_100MHz_PCIX_266;
else if (slot_avail2 & SLOT_66MHZ_PCIX_266)
bus_speed = PCIX_66MHZ_266;
else if (slot_avail1 & SLOT_133MHZ_PCIX)
bus_speed = PCIX_133MHZ;
else if (slot_avail1 & SLOT_100MHZ_PCIX)
bus_speed = PCIX_100MHZ;
else if (slot_avail1 & SLOT_66MHZ_PCIX)
bus_speed = PCIX_66MHZ;
else if (slot_avail2 & SLOT_66MHZ)
bus_speed = PCI_66MHZ;
else if (slot_avail1 & SLOT_33MHZ)
bus_speed = PCI_33MHZ;
else bus_speed = PCI_SPEED_UNKNOWN;
} else {
bus_speed = PCI_SPEED_66MHz_PCIX_266;
}
if (bus_speed == PCI_SPEED_UNKNOWN) {
if (slot_avail1 & SLOT_133MHZ_PCIX)
bus_speed = PCIX_133MHZ;
bus_speed = PCI_SPEED_133MHz_PCIX;
else if (slot_avail1 & SLOT_100MHZ_PCIX)
bus_speed = PCIX_100MHZ;
bus_speed = PCI_SPEED_100MHz_PCIX;
else if (slot_avail1 & SLOT_66MHZ_PCIX)
bus_speed = PCIX_66MHZ;
bus_speed = PCI_SPEED_66MHz_PCIX;
else if (slot_avail2 & SLOT_66MHZ)
bus_speed = PCI_66MHZ;
bus_speed = PCI_SPEED_66MHz;
else if (slot_avail1 & SLOT_33MHZ)
bus_speed = PCI_33MHZ;
else bus_speed = PCI_SPEED_UNKNOWN;
bus_speed = PCI_SPEED_33MHz;
else
retval = -ENODEV;
}
*value = bus_speed;
......@@ -1231,111 +1113,69 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
{
int retval = 0;
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
u16 sec_bus_status;
int retval = 0;
u8 pi;
u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG);
u8 pi = readb(php_ctlr->creg + PROG_INTERFACE);
u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
DBG_ENTER_ROUTINE
if (!slot->ctrl->hpc_ctlr_handle) {
err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
return -1;
}
if (slot->hp_slot >= php_ctlr->num_slots) {
err("%s: Invalid HPC slot number!\n", __FUNCTION__);
return -1;
if ((pi == 1) && (speed_mode > 4)) {
*value = PCI_SPEED_UNKNOWN;
return -ENODEV;
}
pi = readb(php_ctlr->creg + PROG_INTERFACE);
sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
if (pi == 2) {
switch (sec_bus_status & 0x000f) {
case 0:
bus_speed = PCI_SPEED_33MHz;
break;
case 1:
bus_speed = PCI_SPEED_66MHz;
break;
case 2:
bus_speed = PCI_SPEED_66MHz_PCIX;
break;
case 3:
bus_speed = PCI_SPEED_100MHz_PCIX;
break;
case 4:
bus_speed = PCI_SPEED_133MHz_PCIX;
break;
case 5:
bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
break;
case 6:
bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
break;
case 7:
bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
break;
case 8:
bus_speed = PCI_SPEED_66MHz_PCIX_266;
break;
case 9:
bus_speed = PCI_SPEED_100MHz_PCIX_266;
break;
case 0xa:
bus_speed = PCI_SPEED_133MHz_PCIX_266;
break;
case 0xb:
bus_speed = PCI_SPEED_66MHz_PCIX_533;
break;
case 0xc:
bus_speed = PCI_SPEED_100MHz_PCIX_533;
break;
case 0xd:
bus_speed = PCI_SPEED_133MHz_PCIX_533;
break;
case 0xe:
case 0xf:
default:
bus_speed = PCI_SPEED_UNKNOWN;
break;
}
} else {
/* In the case where pi is undefined, default it to 1 */
switch (sec_bus_status & 0x0007) {
case 0:
bus_speed = PCI_SPEED_33MHz;
break;
case 1:
bus_speed = PCI_SPEED_66MHz;
break;
case 2:
bus_speed = PCI_SPEED_66MHz_PCIX;
break;
case 3:
bus_speed = PCI_SPEED_100MHz_PCIX;
break;
case 4:
bus_speed = PCI_SPEED_133MHz_PCIX;
break;
case 5:
bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
break;
case 6:
bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
break;
case 7:
bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
break;
default:
bus_speed = PCI_SPEED_UNKNOWN;
break;
}
switch (speed_mode) {
case 0x0:
*value = PCI_SPEED_33MHz;
break;
case 0x1:
*value = PCI_SPEED_66MHz;
break;
case 0x2:
*value = PCI_SPEED_66MHz_PCIX;
break;
case 0x3:
*value = PCI_SPEED_100MHz_PCIX;
break;
case 0x4:
*value = PCI_SPEED_133MHz_PCIX;
break;
case 0x5:
*value = PCI_SPEED_66MHz_PCIX_ECC;
break;
case 0x6:
*value = PCI_SPEED_100MHz_PCIX_ECC;
break;
case 0x7:
*value = PCI_SPEED_133MHz_PCIX_ECC;
break;
case 0x8:
*value = PCI_SPEED_66MHz_PCIX_266;
break;
case 0x9:
*value = PCI_SPEED_100MHz_PCIX_266;
break;
case 0xa:
*value = PCI_SPEED_133MHz_PCIX_266;
break;
case 0xb:
*value = PCI_SPEED_66MHz_PCIX_533;
break;
case 0xc:
*value = PCI_SPEED_100MHz_PCIX_533;
break;
case 0xd:
*value = PCI_SPEED_133MHz_PCIX_533;
break;
default:
*value = PCI_SPEED_UNKNOWN;
retval = -ENODEV;
break;
}
*value = bus_speed;
dbg("Current bus speed = %d\n", bus_speed);
DBG_LEAVE_ROUTINE
return retval;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7