staging: brcm80211: remove usage of printf (macro) from driver

The driver contained several calls to printf which was mapped
to printk using a macro. These have been changed to explicit
call to printk or use an appropropriate macro.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c

@@ -114,7 +114,7 @@ bool bcmsdh_chipmatch(u16 vendor, u16 device)
 #ifdef BCMSDIOH_SPI
 	/* This is the PciSpiHost. */
 	if (device == SPIH_FPGA_ID && vendor == VENDOR_BROADCOM) {
-		printf("Found PCI SPI Host Controller\n");
+		WL_NONE("Found PCI SPI Host Controller\n");
 		return true;
 	}
 #endif				/* BCMSDIOH_SPI */

drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.h

@@ -18,12 +18,36 @@
 #define __BCMSDH_SDMMC_H__
 
 #ifdef BCMDBG
-#define sd_err(x)	do { if ((sd_msglevel & SDH_ERROR_VAL) && net_ratelimit()) printf x; } while (0)
-#define sd_trace(x)	do { if ((sd_msglevel & SDH_TRACE_VAL) && net_ratelimit()) printf x; } while (0)
-#define sd_info(x)	do { if ((sd_msglevel & SDH_INFO_VAL) && net_ratelimit()) printf x; } while (0)
-#define sd_debug(x)	do { if ((sd_msglevel & SDH_DEBUG_VAL) && net_ratelimit()) printf x; } while (0)
-#define sd_data(x)	do { if ((sd_msglevel & SDH_DATA_VAL) && net_ratelimit()) printf x; } while (0)
-#define sd_ctrl(x)	do { if ((sd_msglevel & SDH_CTRL_VAL) && net_ratelimit()) printf x; } while (0)
+#define sd_err(x)	\
+	do { \
+		if ((sd_msglevel & SDH_ERROR_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define sd_trace(x)	\
+	do { \
+		if ((sd_msglevel & SDH_TRACE_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define sd_info(x)	\
+	do { \
+		if ((sd_msglevel & SDH_INFO_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define sd_debug(x)	\
+	do { \
+		if ((sd_msglevel & SDH_DEBUG_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define sd_data(x)	\
+	do { \
+		if ((sd_msglevel & SDH_DATA_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define sd_ctrl(x)	\
+	do { \
+		if ((sd_msglevel & SDH_CTRL_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
 #else
 #define sd_err(x)
 #define sd_trace(x)

drivers/staging/brcm80211/brcmfmac/dhd_common.c

@@ -739,10 +739,11 @@ static void wl_show_host_event(wl_event_msg_t *event, void *event_data)
 			memcpy(&hdr, buf, MSGTRACE_HDRLEN);
 
 			if (hdr.version != MSGTRACE_VERSION) {
-				printf
+				DHD_ERROR(
 				    ("\nMACEVENT: %s [unsupported version --> "
 				     "dhd version:%d dongle version:%d]\n",
-				     event_name, MSGTRACE_VERSION, hdr.version);
+				     event_name, MSGTRACE_VERSION, hdr.version)
+				);
 				/* Reset datalen to avoid display below */
 				datalen = 0;
 				break;
@@ -753,18 +754,18 @@ static void wl_show_host_event(wl_event_msg_t *event, void *event_data)
 
 			if (ntoh32(hdr.discarded_bytes)
 			    || ntoh32(hdr.discarded_printf)) {
-				printf
+				DHD_ERROR(
 				    ("\nWLC_E_TRACE: [Discarded traces in dongle -->"
 				     "discarded_bytes %d discarded_printf %d]\n",
 				     ntoh32(hdr.discarded_bytes),
-				     ntoh32(hdr.discarded_printf));
+				     ntoh32(hdr.discarded_printf)));
 			}
 
 			nblost = ntoh32(hdr.seqnum) - seqnum_prev - 1;
 			if (nblost > 0) {
-				printf
+				DHD_ERROR(
 				    ("\nWLC_E_TRACE: [Event lost --> seqnum %d nblost %d\n",
-				     ntoh32(hdr.seqnum), nblost);
+				     ntoh32(hdr.seqnum), nblost));
 			}
 			seqnum_prev = ntoh32(hdr.seqnum);
 
@@ -775,10 +776,10 @@ static void wl_show_host_event(wl_event_msg_t *event, void *event_data)
 			p = (char *)&buf[MSGTRACE_HDRLEN];
 			while ((s = strstr(p, "\n")) != NULL) {
 				*s = '\0';
-				printf("%s\n", p);
+				printk(KERN_DEBUG"%s\n", p);
 				p = s + 1;
 			}
-			printf("%s\n", p);
+			printk(KERN_DEBUG "%s\n", p);
 
 			/* Reset datalen to avoid display below */
 			datalen = 0;

drivers/staging/brcm80211/brcmfmac/dhd_dbg.h

@@ -21,31 +21,31 @@
 
 #define DHD_ERROR(args)	       \
 	do {if ((dhd_msg_level & DHD_ERROR_VAL) && (net_ratelimit())) \
-		printf args; } while (0)
+		printk args; } while (0)
 #define DHD_TRACE(args)		do {if (dhd_msg_level & DHD_TRACE_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_INFO(args)		do {if (dhd_msg_level & DHD_INFO_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_DATA(args)		do {if (dhd_msg_level & DHD_DATA_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_CTL(args)		do {if (dhd_msg_level & DHD_CTL_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_TIMER(args)		do {if (dhd_msg_level & DHD_TIMER_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_HDRS(args)		do {if (dhd_msg_level & DHD_HDRS_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_BYTES(args)		do {if (dhd_msg_level & DHD_BYTES_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_INTR(args)		do {if (dhd_msg_level & DHD_INTR_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_GLOM(args)		do {if (dhd_msg_level & DHD_GLOM_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_EVENT(args)		do {if (dhd_msg_level & DHD_EVENT_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_BTA(args)		do {if (dhd_msg_level & DHD_BTA_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 #define DHD_ISCAN(args)		do {if (dhd_msg_level & DHD_ISCAN_VAL)	\
-					printf args; } while (0)
+					printk args; } while (0)
 
 #define DHD_ERROR_ON()		(dhd_msg_level & DHD_ERROR_VAL)
 #define DHD_TRACE_ON()		(dhd_msg_level & DHD_TRACE_VAL)
@@ -63,7 +63,7 @@
 
 #else	/* (defined BCMDBG) || (defined DHD_DEBUG) */
 
-#define DHD_ERROR(args)  do {if (net_ratelimit()) printf args; } while (0)
+#define DHD_ERROR(args)  do {if (net_ratelimit()) printk args; } while (0)
 #define DHD_TRACE(args)
 #define DHD_INFO(args)
 #define DHD_DATA(args)

drivers/staging/brcm80211/brcmfmac/dhd_linux.c

@@ -2299,7 +2299,7 @@ int dhd_net_attach(dhd_pub_t *dhdp, int ifidx)
 		goto fail;
 	}
 
-	printf("%s: Broadcom Dongle Host Driver\n", net->name);
+	DHD_INFO(("%s: Broadcom Dongle Host Driver\n", net->name));
 
 	return 0;
 
@@ -2934,7 +2934,7 @@ int write_to_file(dhd_pub_t *dhd, u8 *buf, int size)
 	/* open file to write */
 	fp = filp_open("/tmp/mem_dump", O_WRONLY | O_CREAT, 0640);
 	if (!fp) {
-		printf("%s: open file error\n", __func__);
+		DHD_ERROR(("%s: open file error\n", __func__));
 		ret = -1;
 		goto exit;
 	}

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -1951,34 +1951,34 @@ static int dhdsdio_mem_dump(dhd_bus_t *bus)
 	size = bus->ramsize;
 	buf = kmalloc(size, GFP_ATOMIC);
 	if (!buf) {
-		printf("%s: Out of memory (%d bytes)\n", __func__, size);
+		DHD_ERROR(("%s: Out of memory (%d bytes)\n", __func__, size));
 		return -1;
 	}
 
 	/* Read mem content */
-	printf("Dump dongle memory");
+	printk(KERN_DEBUG "Dump dongle memory");
 	databuf = buf;
 	while (size) {
 		read_size = min(MEMBLOCK, size);
 		ret = dhdsdio_membytes(bus, false, start, databuf, read_size);
 		if (ret) {
-			printf("%s: Error membytes %d\n", __func__, ret);
+			DHD_ERROR(("%s: Error membytes %d\n", __func__, ret));
 			if (buf)
 				kfree(buf);
 			return -1;
 		}
-		printf(".");
+		printk(".");
 
 		/* Decrement size and increment start address */
 		size -= read_size;
 		start += read_size;
 		databuf += read_size;
 	}
-	printf("Done\n");
+	printk(KERN_DEBUG "Done\n");
 
 	/* free buf before return !!! */
 	if (write_to_file(bus->dhd, buf, bus->ramsize)) {
-		printf("%s: Error writing to files\n", __func__);
+		DHD_ERROR(("%s: Error writing to files\n", __func__));
 		return -1;
 	}
 
@@ -2056,7 +2056,7 @@ static int dhdsdio_readconsole(dhd_bus_t *bus)
 			if (line[n - 1] == '\r')
 				n--;
 			line[n] = 0;
-			printf("CONSOLE: %s\n", line);
+			printk(KERN_DEBUG "CONSOLE: %s\n", line);
 		}
 	}
 break2:
@@ -4500,7 +4500,7 @@ bool dhdsdio_dpc(dhd_bus_t *bus)
 		if (ret == 0)
 			bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
 
-		printf("Return_dpc value is : %d\n", ret);
+		DHD_INFO(("Return_dpc value is : %d\n", ret));
 		bus->ctrl_frame_stat = false;
 		dhd_wait_event_wakeup(bus->dhd);
 	}
@@ -4640,7 +4640,7 @@ static void dhdsdio_pktgen(dhd_bus_t *bus)
 	/* Display current count if appropriate */
 	if (bus->pktgen_print && (++bus->pktgen_ptick >= bus->pktgen_print)) {
 		bus->pktgen_ptick = 0;
-		printf("%s: send attempts %d rcvd %d\n",
+		printk(KERN_DEBUG "%s: send attempts %d rcvd %d\n",
 		       __func__, bus->pktgen_sent, bus->pktgen_rcvd);
 	}
 
@@ -5237,7 +5237,7 @@ dhdsdio_probe_attach(struct dhd_bus *bus, struct osl_info *osh, void *sdh,
 		DHD_ERROR(("%s: FAILED to return to SI_ENUM_BASE\n", __func__));
 
 #ifdef DHD_DEBUG
-	printf("F1 signature read @0x18000000=0x%4x\n",
+	printk(KERN_DEBUG "F1 signature read @0x18000000=0x%4x\n",
 	       bcmsdh_reg_read(bus->sdh, SI_ENUM_BASE, 4));
 
 #endif				/* DHD_DEBUG */

drivers/staging/brcm80211/brcmfmac/wl_iw.c

@@ -3444,9 +3444,9 @@ void wl_iw_event(struct net_device *dev, wl_event_msg_t *e, void *data)
 			wrqu.data.length = sizeof(status) + 1;
 			extra[0] = WLC_E_ACTION_FRAME_COMPLETE;
 			memcpy(&extra[1], &status, sizeof(status));
-			printf("wl_iw_event status %d PacketId %d\n", status,
+			WL_TRACE("wl_iw_event status %d PacketId %d\n", status,
 				 toto);
-			printf("WLC_E_ACTION_FRAME_COMPLETE len %d\n",
+			WL_TRACE("WLC_E_ACTION_FRAME_COMPLETE len %d\n",
 				 wrqu.data.length);
 		}
 		break;

drivers/staging/brcm80211/brcmsmac/wl_mac80211.c

@@ -711,7 +711,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
 
 	/* prepare ucode */
 	if (wl_request_fw(wl, (struct pci_dev *)btparam)) {
-		printf("%s: Failed to find firmware usually in %s\n",
+		WL_ERROR("%s: Failed to find firmware usually in %s\n",
 			 KBUILD_MODNAME, "/lib/firmware/brcm");
 		wl_release_fw(wl);
 		wl_remove((struct pci_dev *)btparam);
@@ -723,7 +723,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
 			     wl->regsva, wl->bcm_bustype, btparam, &err);
 	wl_release_fw(wl);
 	if (!wl->wlc) {
-		printf("%s: wlc_attach() failed with code %d\n",
+		WL_ERROR("%s: wlc_attach() failed with code %d\n",
 			 KBUILD_MODNAME, err);
 		goto fail;
 	}
@@ -1705,7 +1705,7 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
 				pdata = wl->fw.fw_bin[i]->data + hdr->offset;
 				*pbuf = kmalloc(hdr->len, GFP_ATOMIC);
 				if (*pbuf == NULL) {
-					printf("fail to alloc %d bytes\n",
+					WL_ERROR("fail to alloc %d bytes\n",
 						 hdr->len);
 				}
 				bcopy(pdata, *pbuf, hdr->len);
@@ -1713,7 +1713,7 @@ int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
 			}
 		}
 	}
-	printf("ERROR: ucode buf tag:%d can not be found!\n", idx);
+	WL_ERROR("ERROR: ucode buf tag:%d can not be found!\n", idx);
 	*pbuf = NULL;
 	return -1;
 }
@@ -1735,7 +1735,7 @@ int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx)
 			}
 		}
 	}
-	printf("ERROR: ucode tag:%d can not be found!\n", idx);
+	WL_ERROR("ERROR: ucode tag:%d can not be found!\n", idx);
 	return -1;
 }
 
@@ -1755,7 +1755,7 @@ static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev)
 		WL_NONE("request fw %s\n", fw_name);
 		status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 		if (status) {
-			printf("%s: fail to load firmware %s\n",
+			WL_ERROR("%s: fail to load firmware %s\n",
 				 KBUILD_MODNAME, fw_name);
 			wl_release_fw(wl);
 			return status;
@@ -1765,7 +1765,7 @@ static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev)
 			UCODE_LOADER_API_VER);
 		status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 		if (status) {
-			printf("%s: fail to load firmware %s\n",
+			WL_ERROR("%s: fail to load firmware %s\n",
 				 KBUILD_MODNAME, fw_name);
 			wl_release_fw(wl);
 			return status;

drivers/staging/brcm80211/brcmsmac/wlc_channel.c

@@ -1144,100 +1144,114 @@ wlc_channel_set_chanspec(wlc_cm_info_t *wlc_cm, chanspec_t chanspec,
 static void wlc_phy_txpower_limits_dump(txpwr_limits_t *txpwr)
 {
 	int i;
+	char buf[80];
 	char fraction[4][4] = { "   ", ".25", ".5 ", ".75" };
 
-	printf("CCK                ");
+	sprintf(buf, "CCK                ");
 	for (i = 0; i < WLC_NUM_RATES_CCK; i++) {
-		printf(" %2d%s", txpwr->cck[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->cck[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->cck[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz OFDM SISO   ");
+	sprintf(buf, "20 MHz OFDM SISO   ");
 	for (i = 0; i < WLC_NUM_RATES_OFDM; i++) {
-		printf(" %2d%s", txpwr->ofdm[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->ofdm[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->ofdm[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz OFDM CDD    ");
+	sprintf(buf, "20 MHz OFDM CDD    ");
 	for (i = 0; i < WLC_NUM_RATES_OFDM; i++) {
-		printf(" %2d%s", txpwr->ofdm_cdd[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->ofdm_cdd[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->ofdm_cdd[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz OFDM SISO   ");
+	sprintf(buf, "40 MHz OFDM SISO   ");
 	for (i = 0; i < WLC_NUM_RATES_OFDM; i++) {
-		printf(" %2d%s", txpwr->ofdm_40_siso[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->ofdm_40_siso[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->ofdm_40_siso[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz OFDM CDD    ");
+	sprintf(buf, "40 MHz OFDM CDD    ");
 	for (i = 0; i < WLC_NUM_RATES_OFDM; i++) {
-		printf(" %2d%s", txpwr->ofdm_40_cdd[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->ofdm_40_cdd[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->ofdm_40_cdd[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz MCS0-7 SISO ");
+	sprintf(buf, "20 MHz MCS0-7 SISO ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_20_siso[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_20_siso[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_20_siso[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz MCS0-7 CDD  ");
+	sprintf(buf, "20 MHz MCS0-7 CDD  ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_20_cdd[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_20_cdd[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_20_cdd[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz MCS0-7 STBC ");
+	sprintf(buf, "20 MHz MCS0-7 STBC ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_20_stbc[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_20_stbc[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_20_stbc[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("20 MHz MCS8-15 SDM ");
+	sprintf(buf, "20 MHz MCS8-15 SDM ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_2_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_20_mimo[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_20_mimo[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_20_mimo[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz MCS0-7 SISO ");
+	sprintf(buf, "40 MHz MCS0-7 SISO ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_40_siso[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_40_siso[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_40_siso[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz MCS0-7 CDD  ");
+	sprintf(buf, "40 MHz MCS0-7 CDD  ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_40_cdd[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_40_cdd[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_40_cdd[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz MCS0-7 STBC ");
+	sprintf(buf, "40 MHz MCS0-7 STBC ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_1_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_40_stbc[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_40_stbc[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_40_stbc[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("40 MHz MCS8-15 SDM ");
+	sprintf(buf, "40 MHz MCS8-15 SDM ");
 	for (i = 0; i < WLC_NUM_RATES_MCS_2_STREAM; i++) {
-		printf(" %2d%s", txpwr->mcs_40_mimo[i] / WLC_TXPWR_DB_FACTOR,
+		sprintf(buf[strlen(buf)], " %2d%s",
+			txpwr->mcs_40_mimo[i] / WLC_TXPWR_DB_FACTOR,
 			fraction[txpwr->mcs_40_mimo[i] % WLC_TXPWR_DB_FACTOR]);
 	}
-	printf("\n");
+	printk(KERN_DEBUG "%s\n", buf);
 
-	printf("MCS32               %2d%s\n",
+	printk(KERN_DEBUG "MCS32               %2d%s\n",
 	       txpwr->mcs32 / WLC_TXPWR_DB_FACTOR,
 	       fraction[txpwr->mcs32 % WLC_TXPWR_DB_FACTOR]);
 }

drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c

@@ -4703,19 +4703,21 @@ static const char *supr_reason[] = {
 
 static void wlc_print_txs_status(u16 s)
 {
-	printf("[15:12]  %d  frame attempts\n", (s & TX_STATUS_FRM_RTX_MASK) >>
-	       TX_STATUS_FRM_RTX_SHIFT);
-	printf(" [11:8]  %d  rts attempts\n", (s & TX_STATUS_RTS_RTX_MASK) >>
-	       TX_STATUS_RTS_RTX_SHIFT);
-	printf("    [7]  %d  PM mode indicated\n",
+	printk(KERN_DEBUG "[15:12]  %d  frame attempts\n",
+	       (s & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT);
+	printk(KERN_DEBUG " [11:8]  %d  rts attempts\n",
+	       (s & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT);
+	printk(KERN_DEBUG "    [7]  %d  PM mode indicated\n",
 	       ((s & TX_STATUS_PMINDCTD) ? 1 : 0));
-	printf("    [6]  %d  intermediate status\n",
+	printk(KERN_DEBUG "    [6]  %d  intermediate status\n",
 	       ((s & TX_STATUS_INTERMEDIATE) ? 1 : 0));
-	printf("    [5]  %d  AMPDU\n", (s & TX_STATUS_AMPDU) ? 1 : 0);
-	printf("  [4:2]  %d  Frame Suppressed Reason (%s)\n",
+	printk(KERN_DEBUG "    [5]  %d  AMPDU\n",
+	       (s & TX_STATUS_AMPDU) ? 1 : 0);
+	printk(KERN_DEBUG "  [4:2]  %d  Frame Suppressed Reason (%s)\n",
 	       ((s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT),
 	       supr_reason[(s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT]);
-	printf("    [1]  %d  acked\n", ((s & TX_STATUS_ACK_RCV) ? 1 : 0));
+	printk(KERN_DEBUG "    [1]  %d  acked\n",
+	       ((s & TX_STATUS_ACK_RCV) ? 1 : 0));
 }
 #endif				/* BCMDBG */
 
@@ -4725,21 +4727,22 @@ void wlc_print_txstatus(tx_status_t *txs)
 	u16 s = txs->status;
 	u16 ackphyrxsh = txs->ackphyrxsh;
 
-	printf("\ntxpkt (MPDU) Complete\n");
+	printk(KERN_DEBUG "\ntxpkt (MPDU) Complete\n");
+
+	printk(KERN_DEBUG "FrameID: %04x   ", txs->frameid);
+	printk(KERN_DEBUG "TxStatus: %04x", s);
+	printk(KERN_DEBUG "\n");
 
-	printf("FrameID: %04x   ", txs->frameid);
-	printf("TxStatus: %04x", s);
-	printf("\n");
-#ifdef BCMDBG
 	wlc_print_txs_status(s);
-#endif
-	printf("LastTxTime: %04x ", txs->lasttxtime);
-	printf("Seq: %04x ", txs->sequence);
-	printf("PHYTxStatus: %04x ", txs->phyerr);
-	printf("RxAckRSSI: %04x ",
+
+	printk(KERN_DEBUG "LastTxTime: %04x ", txs->lasttxtime);
+	printk(KERN_DEBUG "Seq: %04x ", txs->sequence);
+	printk(KERN_DEBUG "PHYTxStatus: %04x ", txs->phyerr);
+	printk(KERN_DEBUG "RxAckRSSI: %04x ",
 	       (ackphyrxsh & PRXS1_JSSI_MASK) >> PRXS1_JSSI_SHIFT);
-	printf("RxAckSQ: %04x", (ackphyrxsh & PRXS1_SQ_MASK) >> PRXS1_SQ_SHIFT);
-	printf("\n");
+	printk(KERN_DEBUG "RxAckSQ: %04x",
+	       (ackphyrxsh & PRXS1_SQ_MASK) >> PRXS1_SQ_SHIFT);
+	printk(KERN_DEBUG "\n");
 #endif				/* defined(BCMDBG) */
 }
 
@@ -4884,51 +4887,50 @@ void wlc_print_txdesc(d11txh_t *txh)
 	/* add plcp header along with txh descriptor */
 	prhex("Raw TxDesc + plcp header", (unsigned char *) txh, sizeof(d11txh_t) + 48);
 
-	printf("TxCtlLow: %04x ", mtcl);
-	printf("TxCtlHigh: %04x ", mtch);
-	printf("FC: %04x ", mfc);
-	printf("FES Time: %04x\n", tfest);
-	printf("PhyCtl: %04x%s ", ptcw,
+	printk(KERN_DEBUG "TxCtlLow: %04x ", mtcl);
+	printk(KERN_DEBUG "TxCtlHigh: %04x ", mtch);
+	printk(KERN_DEBUG "FC: %04x ", mfc);
+	printk(KERN_DEBUG "FES Time: %04x\n", tfest);
+	printk(KERN_DEBUG "PhyCtl: %04x%s ", ptcw,
 	       (ptcw & PHY_TXC_SHORT_HDR) ? " short" : "");
-	printf("PhyCtl_1: %04x ", ptcw_1);
-	printf("PhyCtl_1_Fbr: %04x\n", ptcw_1_Fbr);
-	printf("PhyCtl_1_Rts: %04x ", ptcw_1_Rts);
-	printf("PhyCtl_1_Fbr_Rts: %04x\n", ptcw_1_FbrRts);
-	printf("MainRates: %04x ", mainrates);
-	printf("XtraFrameTypes: %04x ", xtraft);
-	printf("\n");
+	printk(KERN_DEBUG "PhyCtl_1: %04x ", ptcw_1);
+	printk(KERN_DEBUG "PhyCtl_1_Fbr: %04x\n", ptcw_1_Fbr);
+	printk(KERN_DEBUG "PhyCtl_1_Rts: %04x ", ptcw_1_Rts);
+	printk(KERN_DEBUG "PhyCtl_1_Fbr_Rts: %04x\n", ptcw_1_FbrRts);
+	printk(KERN_DEBUG "MainRates: %04x ", mainrates);
+	printk(KERN_DEBUG "XtraFrameTypes: %04x ", xtraft);
+	printk(KERN_DEBUG "\n");
 
 	bcm_format_hex(hexbuf, iv, sizeof(txh->IV));
-	printf("SecIV:       %s\n", hexbuf);
+	printk(KERN_DEBUG "SecIV:       %s\n", hexbuf);
 	bcm_format_hex(hexbuf, ra, sizeof(txh->TxFrameRA));
-	printf("RA:          %s\n", hexbuf);
+	printk(KERN_DEBUG "RA:          %s\n", hexbuf);
 
-	printf("Fb FES Time: %04x ", tfestfb);
+	printk(KERN_DEBUG "Fb FES Time: %04x ", tfestfb);
 	bcm_format_hex(hexbuf, rtspfb, sizeof(txh->RTSPLCPFallback));
-	printf("RTS PLCP: %s ", hexbuf);
-	printf("RTS DUR: %04x ", rtsdfb);
+	printk(KERN_DEBUG "RTS PLCP: %s ", hexbuf);
+	printk(KERN_DEBUG "RTS DUR: %04x ", rtsdfb);
 	bcm_format_hex(hexbuf, fragpfb, sizeof(txh->FragPLCPFallback));
-	printf("PLCP: %s ", hexbuf);
-	printf("DUR: %04x", fragdfb);
-	printf("\n");
+	printk(KERN_DEBUG "PLCP: %s ", hexbuf);
+	printk(KERN_DEBUG "DUR: %04x", fragdfb);
+	printk(KERN_DEBUG "\n");
 
-	printf("MModeLen: %04x ", mmodelen);
-	printf("MModeFbrLen: %04x\n", mmodefbrlen);
+	printk(KERN_DEBUG "MModeLen: %04x ", mmodelen);
+	printk(KERN_DEBUG "MModeFbrLen: %04x\n", mmodefbrlen);
 
-	printf("FrameID:     %04x\n", tfid);
-	printf("TxStatus:    %04x\n", txs);
+	printk(KERN_DEBUG "FrameID:     %04x\n", tfid);
+	printk(KERN_DEBUG "TxStatus:    %04x\n", txs);
 
-	printf("MaxNumMpdu:  %04x\n", mnmpdu);
-	printf("MaxAggbyte:  %04x\n", mabyte);
-	printf("MaxAggbyte_fb:  %04x\n", mabyte_f);
-	printf("MinByte:     %04x\n", mmbyte);
+	printk(KERN_DEBUG "MaxNumMpdu:  %04x\n", mnmpdu);
+	printk(KERN_DEBUG "MaxAggbyte:  %04x\n", mabyte);
+	printk(KERN_DEBUG "MaxAggbyte_fb:  %04x\n", mabyte_f);
+	printk(KERN_DEBUG "MinByte:     %04x\n", mmbyte);
 
 	bcm_format_hex(hexbuf, rtsph, sizeof(txh->RTSPhyHeader));
-	printf("RTS PLCP: %s ", hexbuf);
+	printk(KERN_DEBUG "RTS PLCP: %s ", hexbuf);
 	bcm_format_hex(hexbuf, (u8 *) &rts, sizeof(txh->rts_frame));
-	printf("RTS Frame: %s", hexbuf);
-	printf("\n");
-
+	printk(KERN_DEBUG "RTS Frame: %s", hexbuf);
+	printk(KERN_DEBUG "\n");
 }
 #endif				/* defined(BCMDBG) */
 
@@ -4960,13 +4962,14 @@ void wlc_print_rxh(d11rxhdr_t *rxh)
 
 	snprintf(lenbuf, sizeof(lenbuf), "0x%x", len);
 
-	printf("RxFrameSize:     %6s (%d)%s\n", lenbuf, len,
+	printk(KERN_DEBUG "RxFrameSize:     %6s (%d)%s\n", lenbuf, len,
 	       (rxh->PhyRxStatus_0 & PRXS0_SHORTH) ? " short preamble" : "");
-	printf("RxPHYStatus:     %04x %04x %04x %04x\n",
+	printk(KERN_DEBUG "RxPHYStatus:     %04x %04x %04x %04x\n",
 	       phystatus_0, phystatus_1, phystatus_2, phystatus_3);
-	printf("RxMACStatus:     %x %s\n", macstatus1, flagstr);
-	printf("RXMACaggtype: %x\n", (macstatus2 & RXS_AGGTYPE_MASK));
-	printf("RxTSFTime:       %04x\n", rxh->RxTSFTime);
+	printk(KERN_DEBUG "RxMACStatus:     %x %s\n", macstatus1, flagstr);
+	printk(KERN_DEBUG "RXMACaggtype:    %x\n",
+	       (macstatus2 & RXS_AGGTYPE_MASK));
+	printk(KERN_DEBUG "RxTSFTime:       %04x\n", rxh->RxTSFTime);
 }
 #endif				/* defined(BCMDBG) */
 

drivers/staging/brcm80211/include/bcmsdh.h

@@ -23,8 +23,16 @@
 extern const uint bcmsdh_msglevel;
 
 #ifdef BCMDBG
-#define BCMSDH_ERROR(x)	do { if ((bcmsdh_msglevel & BCMSDH_ERROR_VAL) && net_ratelimit()) printf x; } while (0)
-#define BCMSDH_INFO(x)	do { if ((bcmsdh_msglevel & BCMSDH_INFO_VAL) && net_ratelimit()) printf x; } while (0)
+#define BCMSDH_ERROR(x) \
+	do { \
+		if ((bcmsdh_msglevel & BCMSDH_ERROR_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
+#define BCMSDH_INFO(x)	\
+	do { \
+		if ((bcmsdh_msglevel & BCMSDH_INFO_VAL) && net_ratelimit()) \
+			printk x; \
+	} while (0)
 #else				/* BCMDBG */
 #define BCMSDH_ERROR(x)
 #define BCMSDH_INFO(x)

drivers/staging/brcm80211/include/osl.h

@@ -106,7 +106,6 @@ extern void osl_dma_unmap(struct osl_info *osh, uint pa, uint size,
 #define	PKTBUFSZ	2048
 
 #define OSL_SYSUPTIME()		((u32)jiffies * (1000 / HZ))
-#define	printf(fmt, args...)	printk(fmt , ## args)
 #ifdef BRCM_FULLMAC
 #include <linux/kernel.h>	/* for vsn/printf's */
 #include <linux/string.h>	/* for mem*, str* */

drivers/staging/brcm80211/include/siutils.h

@@ -188,7 +188,7 @@ extern void si_sprom_init(si_t *sih);
 #define	SI_ERROR(args)
 
 #ifdef BCMDBG
-#define	SI_MSG(args)	printf args
+#define	SI_MSG(args)	printk args
 #else
 #define	SI_MSG(args)
 #endif				/* BCMDBG */

drivers/staging/brcm80211/util/bcmutils.c

@@ -414,7 +414,7 @@ void prpkt(const char *msg, struct osl_info *osh, struct sk_buff *p0)
 	struct sk_buff *p;
 
 	if (msg && (msg[0] != '\0'))
-		printf("%s:\n", msg);
+		printk(KERN_DEBUG "%s:\n", msg);
 
 	for (p = p0; p; p = p->next)
 		prhex(NULL, p->data, p->len);
@@ -865,7 +865,7 @@ void prhex(const char *msg, unsigned char *buf, uint nbytes)
 	uint i;
 
 	if (msg && (msg[0] != '\0'))
-		printf("%s:\n", msg);
+		printk(KERN_DEBUG "%s:\n", msg);
 
 	p = line;
 	for (i = 0; i < nbytes; i++) {
@@ -881,7 +881,7 @@ void prhex(const char *msg, unsigned char *buf, uint nbytes)
 		}
 
 		if (i % 16 == 15) {
-			printf("%s\n", line);	/* flush line */
+			printk(KERN_DEBUG "%s\n", line);	/* flush line */
 			p = line;
 			len = sizeof(line);
 		}
@@ -889,7 +889,7 @@ void prhex(const char *msg, unsigned char *buf, uint nbytes)
 
 	/* flush last partial line */
 	if (p != line)
-		printf("%s\n", line);
+		printk(KERN_DEBUG "%s\n", line);
 }
 
 char *bcm_chipname(uint chipid, char *buf, uint len)

drivers/staging/brcm80211/util/hnddma.c

@@ -40,14 +40,14 @@
 		if (!(*di->msg_level & 1)) \
 			; \
 		else \
-			printf args; \
+			printk args; \
 	} while (0)
 #define	DMA_TRACE(args) \
 	do { \
 		if (!(*di->msg_level & 2)) \
 			; \
 		else \
-			printf args; \
+			printk args; \
 	} while (0)
 #else
 #define	DMA_ERROR(args)
@@ -287,7 +287,7 @@ struct hnddma_pub *dma_attach(struct osl_info *osh, char *name, si_t *sih,
 	di = kzalloc(sizeof(dma_info_t), GFP_ATOMIC);
 	if (di == NULL) {
 #ifdef BCMDBG
-		printf("dma_attach: out of memory\n");
+		printk(KERN_ERR "dma_attach: out of memory\n");
 #endif
 		return NULL;
 	}

drivers/staging/brcm80211/util/hndpmu.c

@@ -31,7 +31,7 @@
 #define	PMU_ERROR(args)
 
 #ifdef BCMDBG
-#define	PMU_MSG(args)	printf args
+#define	PMU_MSG(args)	printk args
 
 /* debug-only definitions */
 /* #define BCMDBG_FORCEHT */