usb: Add driver for UCSI

USB Type-C Connector System Software Interface (UCSI) is
specification that defines the registers and data structures
that can be used to control USB Type-C ports on a system.
UCSI is used on several Intel Broxton SoC based platforms.
Things that UCSI can be used to control include at least USB
Data Role swapping, Power Role swapping and controlling of
Alternate Modes on top of providing general details about
the port and the partners that are attached to it.

The initial purpose of the UCSI driver is to make sure USB
is in host mode on desktop and server systems that are USB
dual role capable, and provide UCSI interface.

The goal is to integrate the driver later to an USB Type-C
framework for Linux kernel, and at the same time add support
for more extensive USB Type-C port control that UCSI offers,
for example data role swapping, power role swapping,
Alternate Mode control etc.

The UCSI specification is public can be obtained from here:
http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.htmlSigned-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/misc/Kconfig

@@ -268,3 +268,29 @@ config USB_CHAOSKEY
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called chaoskey.
+
+config UCSI
+	tristate "USB Type-C Connector System Software Interface driver"
+	depends on ACPI
+	help
+	  UCSI driver is meant to be used as a convenience tool for desktop and
+	  server systems that are not equipped to handle USB in device mode. It
+	  will always select USB host role for the USB Type-C ports on systems
+	  that provide UCSI interface.
+
+	  USB Type-C Connector System Software Interface (UCSI) is a
+	  specification for an interface that allows the Operating System to
+	  control the USB Type-C ports on a system. Things the need controlling
+	  include the USB Data Role (host or device), and when USB Power
+	  Delivery is supported, the Power Role (source or sink). With USB
+	  Type-C connectors, when two dual role capable devices are attached
+	  together, the data role is selected randomly. Therefore it is
+	  important to give the OS a way to select the role. Otherwise the user
+	  would have to unplug and replug in order in order to attempt to swap
+	  the data and power roles.
+
+	  The UCSI specification can be downloaded from:
+	  http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html
+
+	  To compile the driver as a module, choose M here: the module will be
+	  called ucsi.

drivers/usb/misc/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
 obj-$(CONFIG_USB_YUREX)			+= yurex.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
 obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
+obj-$(CONFIG_UCSI)			+= ucsi.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o

drivers/usb/misc/ucsi.h

+
+#include <linux/types.h>
+
+/* -------------------------------------------------------------------------- */
+
+/* Command Status and Connector Change Indication (CCI) data structure */
+struct ucsi_cci {
+	unsigned int RESERVED1:1;
+	unsigned int connector_change:7;
+	u8 data_length;
+	unsigned int RESERVED9:9;
+	unsigned int not_supported:1;
+	unsigned int cancel_complete:1;
+	unsigned int reset_complete:1;
+	unsigned int busy:1;
+	unsigned int ack_complete:1;
+	unsigned int error:1;
+	unsigned int cmd_complete:1;
+} __packed;
+
+/* Default fields in CONTROL data structure */
+struct ucsi_command {
+	u8 cmd;
+	u8 length;
+	u64 data:48;
+} __packed;
+
+/* Set USB Operation Mode Command structure */
+struct ucsi_uor_cmd {
+	u8 cmd;
+	u8 length;
+	u64 con_num:7;
+	u64 role:3;
+#define UCSI_UOR_ROLE_DFP			BIT(0)
+#define UCSI_UOR_ROLE_UFP			BIT(1)
+#define UCSI_UOR_ROLE_DRP			BIT(2)
+	u64 data:38;
+} __packed;
+
+struct ucsi_control {
+	union {
+		u64 raw_cmd;
+		struct ucsi_command cmd;
+		struct ucsi_uor_cmd uor;
+	};
+};
+
+struct ucsi_data {
+	u16 version;
+	u16 RESERVED;
+	union {
+		u32 raw_cci;
+		struct ucsi_cci cci;
+	};
+	struct ucsi_control ctrl;
+	u32 message_in[4];
+	u32 message_out[4];
+} __packed;
+
+/* Commands */
+#define UCSI_PPM_RESET			0x01
+#define UCSI_CANCEL			0x02
+#define UCSI_CONNECTOR_RESET		0x03
+#define UCSI_ACK_CC_CI			0x04
+#define UCSI_SET_NOTIFICATION_ENABLE	0x05
+#define UCSI_GET_CAPABILITY		0x06
+#define UCSI_GET_CONNECTOR_CAPABILITY	0x07
+#define UCSI_SET_UOM			0x08
+#define UCSI_SET_UOR			0x09
+#define UCSI_SET_PDM			0x0A
+#define UCSI_SET_PDR			0x0B
+#define UCSI_GET_ALTERNATE_MODES	0x0C
+#define UCSI_GET_CAM_SUPPORTED		0x0D
+#define UCSI_GET_CURRENT_CAM		0x0E
+#define UCSI_SET_NEW_CAM		0x0F
+#define UCSI_GET_PDOS			0x10
+#define UCSI_GET_CABLE_PROPERTY		0x11
+#define UCSI_GET_CONNECTOR_STATUS	0x12
+#define UCSI_GET_ERROR_STATUS		0x13
+
+/* ACK_CC_CI commands */
+#define UCSI_ACK_EVENT			1
+#define UCSI_ACK_CMD			2
+
+/* Bits for SET_NOTIFICATION_ENABLE command */
+#define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT(0)
+#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT(1)
+#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT(2)
+#define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT(5)
+#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT(6)
+#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT(7)
+#define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT(8)
+#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT(9)
+#define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT(11)
+#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT(12)
+#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT(14)
+#define UCSI_ENABLE_NTFY_ERROR			BIT(15)
+#define UCSI_ENABLE_NTFY_ALL			0xdbe7
+
+/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
+#define UCSI_ERROR_UNREGONIZED_CMD		BIT(0)
+#define UCSI_ERROR_INVALID_CON_NUM		BIT(1)
+#define UCSI_ERROR_INVALID_CMD_ARGUMENT		BIT(2)
+#define UCSI_ERROR_INCOMPATIBLE_PARTNER		BIT(3)
+#define UCSI_ERROR_CC_COMMUNICATION_ERR		BIT(4)
+#define UCSI_ERROR_DEAD_BATTERY			BIT(5)
+#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL	BIT(6)
+
+/* Data structure filled by PPM in response to GET_CAPABILITY command. */
+struct ucsi_capability {
+	u32 attributes;
+#define UCSI_CAP_ATTR_DISABLE_STATE		BIT(0)
+#define UCSI_CAP_ATTR_BATTERY_CHARGING		BIT(1)
+#define UCSI_CAP_ATTR_USB_PD			BIT(2)
+#define UCSI_CAP_ATTR_TYPEC_CURRENT		BIT(6)
+#define UCSI_CAP_ATTR_POWER_AC_SUPPLY		BIT(8)
+#define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
+#define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
+	u8 num_connectors;
+	u32 features:24;
+#define UCSI_CAP_SET_UOM			BIT(0)
+#define UCSI_CAP_SET_PDM			BIT(1)
+#define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
+#define UCSI_CAP_ALT_MODE_OVERRIDE		BIT(3)
+#define UCSI_CAP_PDO_DETAILS			BIT(4)
+#define UCSI_CAP_CABLE_DETAILS			BIT(5)
+#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
+#define UCSI_CAP_PD_RESET			BIT(7)
+	u8 num_alt_modes;
+	u8 RESERVED;
+	u16 bc_version;
+	u16 pd_version;
+	u16 typec_version;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
+struct ucsi_connector_capability {
+	u8 op_mode;
+#define UCSI_CONCAP_OPMODE_DFP			BIT(0)
+#define UCSI_CONCAP_OPMODE_UFP			BIT(1)
+#define UCSI_CONCAP_OPMODE_DRP			BIT(2)
+#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY	BIT(3)
+#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY	BIT(4)
+#define UCSI_CONCAP_OPMODE_USB2			BIT(5)
+#define UCSI_CONCAP_OPMODE_USB3			BIT(6)
+#define UCSI_CONCAP_OPMODE_ALT_MODE		BIT(7)
+	u8 provider:1;
+	u8 consumer:1;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
+struct ucsi_cable_property {
+	u16 speed_supported;
+	u8 current_capability;
+	u8 vbus_in_cable:1;
+	u8 active_cable:1;
+	u8 directionality:1;
+	u8 plug_type:2;
+#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A		0
+#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B		1
+#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C		2
+#define UCSI_CABLE_PROPERTY_PLUG_OTHER		3
+	u8 mode_support:1;
+	u8 RESERVED_2:2;
+	u8 latency:4;
+	u8 RESERVED_4:4;
+} __packed;
+
+/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
+struct ucsi_connector_status {
+	u16 change;
+#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE		BIT(1)
+#define UCSI_CONSTAT_POWER_OPMODE_CHANGE	BIT(2)
+#define UCSI_CONSTAT_PDOS_CHANGE		BIT(5)
+#define UCSI_CONSTAT_POWER_LEVEL_CHANGE		BIT(6)
+#define UCSI_CONSTAT_PD_RESET_COMPLETE		BIT(7)
+#define UCSI_CONSTAT_CAM_CHANGE			BIT(8)
+#define UCSI_CONSTAT_BC_CHANGE			BIT(9)
+#define UCSI_CONSTAT_PARTNER_CHANGE		BIT(11)
+#define UCSI_CONSTAT_POWER_DIR_CHANGE		BIT(12)
+#define UCSI_CONSTAT_CONNECT_CHANGE		BIT(14)
+#define UCSI_CONSTAT_ERROR			BIT(15)
+	u16 pwr_op_mode:3;
+#define UCSI_CONSTAT_PWR_OPMODE_NONE		0
+#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT		1
+#define UCSI_CONSTAT_PWR_OPMODE_BC		2
+#define UCSI_CONSTAT_PWR_OPMODE_PD		3
+#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_3	4
+#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0	5
+	u16 connected:1;
+	u16 pwr_dir:1;
+	u16 partner_flags:8;
+#define UCSI_CONSTAT_PARTNER_FLAG_USB		BIT(0)
+#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE	BIT(1)
+	u16 partner_type:3;
+#define UCSI_CONSTAT_PARTNER_TYPE_DFP		1
+#define UCSI_CONSTAT_PARTNER_TYPE_UFP		2
+#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_NO_UFP	3 /* Powered Cable */
+#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP	4 /* Powered Cable */
+#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG		5
+#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO		6
+	u32 request_data_obj;
+	u8 bc_status:2;
+#define UCSI_CONSTAT_BC_NOT_CHARGING		0
+#define UCSI_CONSTAT_BC_NOMINAL_CHARGING	1
+#define UCSI_CONSTAT_BC_SLOW_CHARGING		2
+#define UCSI_CONSTAT_BC_TRICKLE_CHARGING	3
+	u8 provider_cap_limit_reason:4;
+#define UCSI_CONSTAT_CAP_PWR_LOWERED		0
+#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT	1
+	u8 RESERVED:2;
+} __packed;
+
+/* -------------------------------------------------------------------------- */
+