Merge branch 'next' into for-linus

drivers/input/gameport/gameport.c

@@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list);
 
 static struct bus_type gameport_bus;
 
-static void gameport_add_driver(struct gameport_driver *drv);
 static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
 static void gameport_reconnect_port(struct gameport *gameport);
 static void gameport_disconnect_port(struct gameport *gameport);
 
@@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport)
 
 enum gameport_event_type {
 	GAMEPORT_REGISTER_PORT,
-	GAMEPORT_REGISTER_DRIVER,
 	GAMEPORT_ATTACH_DRIVER,
 };
 
@@ -374,8 +372,8 @@ static void gameport_handle_event(void)
 				gameport_add_port(event->object);
 				break;
 
-			case GAMEPORT_REGISTER_DRIVER:
-				gameport_add_driver(event->object);
+			case GAMEPORT_ATTACH_DRIVER:
+				gameport_attach_driver(event->object);
 				break;
 
 			default:
@@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev)
 	return 0;
 }
 
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
 {
 	int error;
 
-	error = driver_register(&drv->driver);
+	error = driver_attach(&drv->driver);
 	if (error)
 		printk(KERN_ERR
-			"gameport: driver_register() failed for %s, error: %d\n",
+			"gameport: driver_attach() failed for %s, error: %d\n",
 			drv->driver.name, error);
 }
 

drivers/input/input.c

@@ -1549,7 +1549,6 @@ int input_register_handle(struct input_handle *handle)
 		return error;
 	list_add_tail_rcu(&handle->d_node, &dev->h_list);
 	mutex_unlock(&dev->mutex);
-	synchronize_rcu();
 
 	/*
 	 * Since we are supposed to be called from ->connect()

drivers/input/keyboard/atkbd.c

@@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
 };
 
 /*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
 	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
@@ -1533,6 +1533,24 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
+	{
+		.ident = "Samsung NC20",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		.ident = "Samsung SQ45S70S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
 	{
 		.ident = "Fujitsu Amilo PA 1510",
 		.matches = {

drivers/input/keyboard/bf54x-keys.c

@@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev)
 	}
 
 	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
-				 IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+				0, DRV_NAME, pdev);
 	if (error) {
 		printk(KERN_ERR DRV_NAME
 			": unable to claim irq %d; error %d\n",

drivers/input/misc/Kconfig

@@ -214,7 +214,7 @@ config INPUT_SGI_BTNS
 
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
-	depends on GSC || HP300
+	depends on (GSC || HP300) && SERIO
 	select HP_SDC
 	help
 	  Say Y here if you want to support the built-in real time clock

drivers/input/mouse/pc110pad.c

@@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev)
  */
 static int __init pc110pad_init(void)
 {
-	struct pci_dev *dev;
 	int err;
 
 	if (!no_pci_devices())

drivers/input/serio/i8042-x86ia64io.h

@@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
+	{
+		.ident = "LG Electronics X110",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_PNP
 static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{
@@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
 	{ }
 };
 #endif
@@ -698,6 +723,9 @@ static int __init i8042_platform_init(void)
 #endif
 
 #ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_reset_table))
+		i8042_reset = 1;
+
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 

drivers/input/serio/i8042.c

@@ -712,22 +712,43 @@ static int i8042_controller_check(void)
 static int i8042_controller_selftest(void)
 {
 	unsigned char param;
+	int i = 0;
 
 	if (!i8042_reset)
 		return 0;
 
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
 			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
 			return -ENODEV;
 		}
 
-	if (param != I8042_RET_CTL_TEST) {
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
+
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
 			param, I8042_RET_CTL_TEST);
-		return -EIO;
-	}
+		msleep(50);
+	} while (i++ < 5);
 
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	printk(KERN_INFO
+		"i8042: giving up on controller selftest, continuing anyway...\n");
 	return 0;
+#else
+	return -EIO;
+#endif
 }
 
 /*

drivers/input/touchscreen/ad7877.c

@@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 
 	/* Request AD7877 /DAV GPIO interrupt */
 
-	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
-			IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+			spi->dev.driver->name, ts);
 	if (err) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		goto err_free_mem;

drivers/input/touchscreen/ad7879.c

@@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	ad7879_setup(ts);
 
 	err = request_irq(bus->irq, ad7879_irq,
-			  IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
-			  bus->dev.driver->name, ts);
+			  IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
 
 	if (err) {
 		dev_err(&bus->dev, "irq %d busy?\n", bus->irq);

drivers/input/touchscreen/ads7846.c

@@ -127,6 +127,8 @@ struct ads7846 {
 	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 	int			gpio_pendown;
+
+	void			(*wait_for_sync)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts)
 	return !gpio_get_value(ts->gpio_pendown);
 }
 
+static void null_wait_for_sync(void)
+{
+}
+
 /*
  * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
  * to retrieve touchscreen status.
@@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads)
 	default:
 		BUG();
 	}
+	ts->wait_for_sync();
 	status = spi_async(ts->spi, m);
 	if (status)
 		dev_err(&ts->spi->dev, "spi_async --> %d\n",
@@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 	} else {
 		/* pen is still down, continue with the measurement */
 		ts->msg_idx = 0;
+		ts->wait_for_sync();
 		status = spi_async(ts->spi, &ts->msg[0]);
 		if (status)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
@@ -746,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 			 * that here.  (The "generic irq" framework may help...)
 			 */
 			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
+			disable_irq_nosync(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
@@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
 
 	input_dev->name = "ADS784x Touchscreen";

drivers/input/touchscreen/da9034-ts.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Bin Yang  <bin.yang@marvell.com>
  *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -175,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			goto err_reset;
 
 		touch->state = STATE_STOP;
+
+		/* FIXME: PEN_{UP/DOWN} events are expected to be
+		 * available by stopping TSI, but this is found not
+		 * always true, delay and simulate such an event
+		 * here is more reliable
+		 */
+		mdelay(1);
+		da9034_event_handler(touch,
+				     is_pen_down(touch) ? EVENT_PEN_DOWN :
+							  EVENT_PEN_UP);
 		break;
 
 	case STATE_STOP:
@@ -189,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			report_pen_up(touch);
 			touch->state = STATE_IDLE;
 		}
-
-		input_sync(touch->input_dev);
 		break;
 
 	case STATE_WAIT:
@@ -200,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 		if (is_pen_down(touch)) {
 			start_tsi(touch);
 			touch->state = STATE_BUSY;
-		} else
+		} else {
+			report_pen_up(touch);
 			touch->state = STATE_IDLE;
+		}
 		break;
 	}
 	return;
@@ -226,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb,
 	struct da9034_touch *touch =
 		container_of(nb, struct da9034_touch, notifier);
 
-	if (event & DA9034_EVENT_PEN_DOWN) {
-		if (is_pen_down(touch))
-			da9034_event_handler(touch, EVENT_PEN_DOWN);
-		else
-			da9034_event_handler(touch, EVENT_PEN_UP);
-	}
-
 	if (event & DA9034_EVENT_TSI_READY)
 		da9034_event_handler(touch, EVENT_TSI_READY);
 
+	if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+		da9034_event_handler(touch, EVENT_PEN_DOWN);
+
 	return 0;
 }
 
@@ -385,6 +392,6 @@ static void __exit da9034_touch_exit(void)
 module_exit(da9034_touch_exit);
 
 MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:da9034-touch");

drivers/input/touchscreen/mainstone-wm97xx.c

@@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm)
 #else
 static void wm97xx_acc_pen_up(struct wm97xx *wm)
 {
-	int count = 16;
+	unsigned int count;
+
 	schedule_timeout_uninterruptible(1);
 
-	while (count < 16) {
+	for (count = 0; count < 16; count++)
 		MODR;
-		count--;
-	}
 }
 #endif
 

drivers/input/touchscreen/wm97xx-core.c

@@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
 	 * provided. */
 	BUG_ON(!wm->mach_ops->irq_enable);
 
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
-			IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
 			"wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");

include/linux/spi/ads7846.h

@@ -51,5 +51,6 @@ struct ads7846_platform_data {
 				 void **filter_data);
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
+	void	(*wait_for_sync)(void);
 };