Merge http://linuxusb.bkbits.net/linus-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

drivers/usb/core/message.c

@@ -436,17 +436,21 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
  * Within any given configuration, each interface may have several
  * alternative settings.  These are often used to control levels of
  * bandwidth consumption.  For example, the default setting for a high
- * speed interrupt endpoint may not send more than about 4KBytes per
- * microframe, and isochronous endpoints may never be part of a an
+ * speed interrupt endpoint may not send more than 64 bytes per microframe,
+ * while interrupt transfers of up to 3KBytes per microframe are legal.
+ * Also, isochronous endpoints may never be part of an
  * interface's default setting.  To access such bandwidth, alternate
- * interface setting must be made current.
+ * interface settings must be made current.
  *
  * Note that in the Linux USB subsystem, bandwidth associated with
- * an endpoint in a given alternate setting is not reserved until an
+ * an endpoint in a given alternate setting is not reserved until an URB
  * is submitted that needs that bandwidth.  Some other operating systems
  * allocate bandwidth early, when a configuration is chosen.
  *
  * This call is synchronous, and may not be used in an interrupt context.
+ * Also, drivers must not change altsettings while urbs are scheduled for
+ * endpoints in that interface; all such urbs must first be completed
+ * (perhaps forced by unlinking).
  *
  * Returns zero on success, or else the status code returned by the
  * underlying usb_control_msg() call.

drivers/usb/core/usb.c

@@ -947,8 +947,9 @@ static void usb_find_drivers(struct usb_device *dev)
 		/* register this interface with driverfs */
 		interface->dev.parent = &dev->dev;
 		interface->dev.bus = &usb_bus_type;
-		sprintf (&interface->dev.bus_id[0], "if%d",
-			interface->altsetting->bInterfaceNumber);
+		sprintf (&interface->dev.bus_id[0], "%s:%d",
+			 dev->devpath,
+			 interface->altsetting->bInterfaceNumber);
 		if (!desc->iInterface
 				|| usb_string (dev, desc->iInterface,
 					interface->dev.name,
@@ -1288,56 +1289,59 @@ int usb_set_address(struct usb_device *dev)
  */
 static void set_device_description (struct usb_device *dev)
 {
-	char	*buf, *here, *end;
+	void    *buf;
 	int	mfgr = dev->descriptor.iManufacturer;
 	int	prod = dev->descriptor.iProduct;
+	int	vendor_id = dev->descriptor.idVendor;
+	int	product_id = dev->descriptor.idProduct;
+	char	*mfgr_str, *prod_str;
 
-	/* set default; keep it if there are no strings */
+	/* set default; keep it if there are no strings, or kmalloc fails */
 	sprintf (dev->dev.name, "USB device %04x:%04x",
-		 dev->descriptor.idVendor,
-		 dev->descriptor.idProduct);
-	if (!mfgr && !prod)
-		return;
+		 vendor_id, product_id);
 
-	if (!(buf = kmalloc(256, GFP_KERNEL)))
+	if (!(buf = kmalloc(256 * 2, GFP_KERNEL)))
 		return;
-	here = dev->dev.name;
-	end = here + sizeof dev->dev.name - 2;
-	*end = 0;
+	
+	prod_str = (char *) buf;
+	mfgr_str = (char *) buf + 256;
 
-	/* much like pci ... describe as either:
-	 * - both strings:   'product descr (vendor descr)'
-	 * - product only:   'product descr (USB device vvvv:pppp)'
-	 * - vendor only:    'USB device vvvv:pppp (vendor descr)'
-	 * - neither string: 'USB device vvvv:pppp'
-	 */
-	if (prod && usb_string (dev, prod, buf, 256) > 0) {
-		strncpy (here, buf, end - here);
+	if (prod && usb_string (dev, prod, prod_str, 256) > 0) {
 #ifdef DEBUG
-		printk (KERN_INFO "Product: %s\n", buf);
+		printk (KERN_INFO "Product: %s\n", prod_str);
 #endif
 	} else {
-		buf [0] = 0;
-		prod = -1;
+		prod_str = 0;
 	}
-	here = strchr (here, 0);
-	if (mfgr && usb_string (dev, mfgr, buf, 256) > 0) {
-		*here++ = ' ';
-		*here++ = '(';
-		strncpy (here, buf, end - here - 1);
-		here = strchr (here, 0);
-		*here++ = ')';
+
+	if (mfgr && usb_string (dev, mfgr, mfgr_str, 256) > 0) {
 #ifdef DEBUG
-		printk (KERN_INFO "Manufacturer: %s\n", buf);
+		printk (KERN_INFO "Manufacturer: %s\n", mfgr_str);
 #endif
 	} else {
-		if (prod != -1)
-			snprintf (here, end - here - 1,
-				" (USB device %04x:%04x)",
-				dev->descriptor.idVendor,
-				dev->descriptor.idProduct);
-		/* both strings unavailable, keep the default */
+		mfgr_str = 0;
 	}
+
+	/* much like pci ... describe as either:
+	 * - both strings:   'product descr (vendor descr)'
+	 * - product only:   'product descr (USB device vvvv:pppp)'
+	 * - vendor only:    'USB device vvvv:pppp (vendor descr)'
+	 * - neither string: 'USB device vvvv:pppp'
+	 */
+
+	if (prod_str && mfgr_str) {
+		snprintf(dev->dev.name, sizeof dev->dev.name,
+			 "%s (%s)", prod_str, mfgr_str);
+	} else if (prod_str) {
+		snprintf(dev->dev.name, sizeof dev->dev.name,
+			 "%s (USB device %04x:%04x)",
+			 prod_str, vendor_id, product_id);
+	} else if (mfgr_str) {
+		snprintf(dev->dev.name, sizeof dev->dev.name,
+			 "USB device %04x:%04x (%s)",
+			 vendor_id, product_id, mfgr_str);
+	}
+
 	kfree(buf);
 }
 

drivers/usb/host/ohci-sa1111.c

@@ -14,6 +14,7 @@
  */
  
 #include <asm/hardware.h>
+#include <asm/mach-types.h>
 #include <asm/arch/assabet.h>
 #include <asm/arch/badge4.h>
 #include <asm/hardware/sa1111.h>

drivers/usb/host/uhci-hcd.c

@@ -2053,6 +2053,8 @@ static void start_hc(struct uhci_hcd *uhci)
 
 	/* Run and mark it configured with a 64-byte max packet */
 	outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD);
+
+        uhci->hcd.state = USB_STATE_READY;
 }
 
 #ifdef CONFIG_PROC_FS
@@ -2344,8 +2346,6 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
 	/* disable legacy emulation */
 	pci_write_config_word(dev, USBLEGSUP, USBLEGSUP_DEFAULT);
 
-        hcd->state = USB_STATE_READY;
-
 	usb_connect(uhci->rh_dev);
         uhci->rh_dev->speed = USB_SPEED_FULL;
 

drivers/usb/input/hid-ff.c

@@ -83,7 +83,7 @@ int hid_ff_init(struct hid_device* hid)
 			       hid->dev->descriptor.idProduct);
 
 	if (!init) {
-		warn("hid_ff_init could not find initializer");
+		dbg("hid_ff_init could not find initializer");
 		return -ENOSYS;
 	}
 	return init->init(hid);

drivers/usb/misc/rio500.c

@@ -146,7 +146,7 @@ ioctl_rio(struct inode *inode, struct file *file, unsigned int cmd,
 			retval = -EFAULT;
 			goto err_out;
 		}
-		if (rio_cmd.length > PAGE_SIZE) {
+		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
 			retval = -EINVAL;
 			goto err_out;
 		}
@@ -216,7 +216,7 @@ ioctl_rio(struct inode *inode, struct file *file, unsigned int cmd,
 			retval = -EFAULT;
 			goto err_out;
 		}
-		if (rio_cmd.length > PAGE_SIZE) {
+		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
 			retval = -EINVAL;
 			goto err_out;
 		}

drivers/usb/misc/tiglusb.h

@@ -33,7 +33,6 @@ typedef struct
 {
 	struct usb_device	*dev;		/* USB device handle */
 	struct semaphore	mutex;		/* locks this struct */
-	struct semaphore	sem;
 
 	wait_queue_head_t	wait;		/* for timed waits */
 	wait_queue_head_t	remove_ok;
@@ -44,12 +43,6 @@ typedef struct
 	driver_state_t	state;			/* started/stopped */
 	int		opened;			/* tru if open */
 	int	remove_pending;
-
-	char	rd_buf[BULK_RCV_MAX];		/* read  buffer */
-	char	wr_buf[BULK_SND_MAX];		/* write buffer */
-
 } tiglusb_t, *ptiglusb_t;
 
-extern devfs_handle_t usb_devfs_handle;		/* /dev/usb dir. */
-
 #endif

drivers/usb/net/rtl8150.c

@@ -21,7 +21,7 @@
 #include <asm/uaccess.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v0.5.4 (2002/04/11)"
+#define DRIVER_VERSION "v0.5.5 (2002/07/22)"
 #define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
 #define DRIVER_DESC "rtl8150 based usb-ethernet driver"
 
@@ -68,11 +68,15 @@
 
 /* Define these values to match your device */
 #define VENDOR_ID_REALTEK		0x0bda
+#define	VENDOR_ID_MELCO			0x0411
+
 #define PRODUCT_ID_RTL8150		0x8150
+#define	PRODUCT_ID_LUAKTX		0x0012
 
 /* table of devices that work with this driver */
 static struct usb_device_id rtl8150_table[] = {
 	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
+	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
 	{}
 };
 
@@ -729,11 +733,6 @@ static void *rtl8150_probe(struct usb_device *udev, unsigned int ifnum,
 		err("usb_set_configuration() failed");
 		return NULL;
 	}
-	if ((udev->descriptor.idVendor != VENDOR_ID_REALTEK) ||
-	    (udev->descriptor.idProduct != PRODUCT_ID_RTL8150)) {
-		err("Not the one we are interested about");
-		return NULL;
-	}
 	dev = kmalloc(sizeof(rtl8150_t), GFP_KERNEL);
 	if (!dev) {
 		err("Out of memory");

drivers/usb/serial/pl2303.c

@@ -71,6 +71,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -19,3 +19,6 @@
 
 #define ELCOM_VENDOR_ID		0x056e
 #define ELCOM_PRODUCT_ID	0x5003
+
+#define ITEGNO_VENDOR_ID	0x0eba
+#define ITEGNO_PRODUCT_ID	0x1080

drivers/usb/serial/usb-serial.h

@@ -67,11 +67,40 @@
 /* parity check flag */
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 
-
+/**
+ * usb_serial_port: structure for the specific ports of a device.
+ * @magic: magic number for internal validity of this pointer.
+ * @serial: pointer back to the struct usb_serial owner of this port.
+ * @tty: pointer to the coresponding tty for this port.
+ * @number: the number of the port (the minor number).
+ * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
+ * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
+ * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
+ *	for this port.
+ * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @read_urb: pointer to the bulk in struct urb for this port.
+ * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
+ *	port.
+ * @bulk_out_buffer: pointer to the bulk out buffer for this port.
+ * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
+ * @write_urb: pointer to the bulk out struct urb for this port.
+ * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
+ *	port.
+ * @write_wait: a wait_queue_head_t used by the port.
+ * @tqueue: task queue for the line discipline waking up.
+ * @open_count: number of times this port has been opened.
+ * @sem: struct semaphore used to lock this structure.
+ * @private: place to put any driver specific information that is needed.  The
+ *	usb-serial driver is required to manage this data, the usb-serial core
+ *	will not touch this.
+ *
+ * This structure is used by the usb-serial core and drivers for the specific
+ * ports of a device.
+ */
 struct usb_serial_port {
 	int			magic;
-	struct usb_serial	*serial;	/* pointer back to the owner of this port */
-	struct tty_struct *	tty;		/* the coresponding tty for this port */
+	struct usb_serial	*serial;
+	struct tty_struct *	tty;
 	unsigned char		number;
 
 	unsigned char *		interrupt_in_buffer;
@@ -88,30 +117,44 @@ struct usb_serial_port {
 	__u8			bulk_out_endpointAddress;
 
 	wait_queue_head_t	write_wait;
-
-	struct tq_struct	tqueue;		/* task queue for line discipline waking up */
-	int			open_count;	/* number of times this port has been opened */
-	struct semaphore	sem;		/* locks this structure */
-	
-	void *			private;	/* data private to the specific port */
+	struct tq_struct	tqueue;
+	int			open_count;
+	struct semaphore	sem;
+	void *			private;
 };
 
+/**
+ * usb_serial - structure used by the usb-serial core for a device
+ * @magic: magic number for internal validity of this pointer.
+ * @dev: pointer to the struct usb_device for this device
+ * @type: pointer to the struct usb_serial_device_type for this device
+ * @interface: pointer to the struct usb_interface for this device
+ * @minor: the starting minor number for this device
+ * @num_ports: the number of ports this device has
+ * @num_interrupt_in: number of interrupt in endpoints we have
+ * @num_bulk_in: number of bulk in endpoints we have
+ * @num_bulk_out: number of bulk out endpoints we have
+ * @vendor: vendor id of this device
+ * @product: product id of this device
+ * @port: array of struct usb_serial_port structures for the different ports.
+ * @private: place to put any driver specific information that is needed.  The
+ *	usb-serial driver is required to manage this data, the usb-serial core
+ *	will not touch this.
+ */
 struct usb_serial {
 	int				magic;
 	struct usb_device *		dev;
-	struct usb_serial_device_type *	type;			/* the type of usb serial device this is */
-	struct usb_interface *		interface;		/* the interface for this device */
-	struct tty_driver *		tty_driver;		/* the tty_driver for this device */
-	unsigned char			minor;			/* the starting minor number for this device */
-	unsigned char			num_ports;		/* the number of ports this device has */
-	char				num_interrupt_in;	/* number of interrupt in endpoints we have */
-	char				num_bulk_in;		/* number of bulk in endpoints we have */
-	char				num_bulk_out;		/* number of bulk out endpoints we have */
-	__u16				vendor;			/* vendor id of this device */
-	__u16				product;		/* product id of this device */
+	struct usb_serial_device_type *	type;
+	struct usb_interface *		interface;
+	unsigned char			minor;
+	unsigned char			num_ports;
+	char				num_interrupt_in;
+	char				num_bulk_in;
+	char				num_bulk_out;
+	__u16				vendor;
+	__u16				product;
 	struct usb_serial_port		port[MAX_NUM_PORTS];
-
-	void *			private;		/* data private to the specific driver */
+	void *				private;
 };