Skip to content

L
linux
Commit 0d69080d authored by Boris Brezillon's avatar Boris Brezillon Committed by Lee Jones
Browse files
Options

mfd: syscon: atmel-smc: Remove unused helpers/macros 

All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent
definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers
are no longer used.
Drop these definitions before someone starts using them again.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent d9f81dad
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 152 deletions
include/linux/mfd/syscon/atmel-smc.h
View file @ 0d69080d
...@@ -17,58 +17,6 @@ ...@@ -17,58 +17,6 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/regmap.h> #include <linux/regmap.h>
#define AT91SAM9_SMC_GENERIC 0x00
#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10
#define SAMA5_SMC_GENERIC 0x600
#define SAMA5_SMC_GENERIC_BLK_SZ 0x14
#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00)
#define AT91SAM9_SMC_NWESETUP(x) (x)
#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8)
#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16)
#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24)
#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04)
#define AT91SAM9_SMC_NWEPULSE(x) (x)
#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8)
#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16)
#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24)
#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08)
#define AT91SAM9_SMC_NWECYCLE(x) (x)
#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16)
#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c)
#define SAMA5_SMC_MODE(o) ((o) + 0x10)
#define AT91_SMC_READMODE BIT(0)
#define AT91_SMC_READMODE_NCS (0 << 0)
#define AT91_SMC_READMODE_NRD (1 << 0)
#define AT91_SMC_WRITEMODE BIT(1)
#define AT91_SMC_WRITEMODE_NCS (0 << 1)
#define AT91_SMC_WRITEMODE_NWE (1 << 1)
#define AT91_SMC_EXNWMODE GENMASK(5, 4)
#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
#define AT91_SMC_EXNWMODE_READY (3 << 4)
#define AT91_SMC_BAT BIT(8)
#define AT91_SMC_BAT_SELECT (0 << 8)
#define AT91_SMC_BAT_WRITE (1 << 8)
#define AT91_SMC_DBW GENMASK(13, 12)
#define AT91_SMC_DBW_8 (0 << 12)
#define AT91_SMC_DBW_16 (1 << 12)
#define AT91_SMC_DBW_32 (2 << 12)
#define AT91_SMC_TDF GENMASK(19, 16)
#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF)
#define AT91_SMC_TDF_MAX 16
#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20)
#define AT91_SMC_PMEN BIT(24)
#define AT91_SMC_PS GENMASK(29, 28)
#define AT91_SMC_PS_4 (0 << 28)
#define AT91_SMC_PS_8 (1 << 28)
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10)) #define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14)) #define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4) #define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
...@@ -157,104 +105,4 @@ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, ...@@ -157,104 +105,4 @@ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs, void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
struct atmel_smc_cs_conf *conf); struct atmel_smc_cs_conf *conf);
/*
* This function converts a setup timing expressed in nanoseconds into an
* encoded value that can be written in the SMC_SETUP register.
*
* The following formula is described in atmel datasheets (section
* "SMC Setup Register"):
*
* setup length = (128* SETUP[5] + SETUP[4:0])
*
* where setup length is the timing expressed in cycles.
*/
static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
u32 timing_ns)
{
u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
u32 coded_cycles = 0;
u32 cycles;
cycles = DIV_ROUND_UP(timing_ns, clk_period);
if (cycles / 32) {
coded_cycles |= 1 << 5;
if (cycles < 128)
cycles = 0;
}
coded_cycles |= cycles % 32;
return coded_cycles;
}
/*
* This function converts a pulse timing expressed in nanoseconds into an
* encoded value that can be written in the SMC_PULSE register.
*
* The following formula is described in atmel datasheets (section
* "SMC Pulse Register"):
*
* pulse length = (256* PULSE[6] + PULSE[5:0])
*
* where pulse length is the timing expressed in cycles.
*/
static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
u32 timing_ns)
{
u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
u32 coded_cycles = 0;
u32 cycles;
cycles = DIV_ROUND_UP(timing_ns, clk_period);
if (cycles / 64) {
coded_cycles |= 1 << 6;
if (cycles < 256)
cycles = 0;
}
coded_cycles |= cycles % 64;
return coded_cycles;
}
/*
* This function converts a cycle timing expressed in nanoseconds into an
* encoded value that can be written in the SMC_CYCLE register.
*
* The following formula is described in atmel datasheets (section
* "SMC Cycle Register"):
*
* cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
*
* where cycle length is the timing expressed in cycles.
*/
static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
u32 timing_ns)
{
u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
u32 coded_cycles = 0;
u32 cycles;
cycles = DIV_ROUND_UP(timing_ns, clk_period);
if (cycles / 128) {
coded_cycles = cycles / 256;
cycles %= 256;
if (cycles >= 128) {
coded_cycles++;
cycles = 0;
}
if (coded_cycles > 0x3) {
coded_cycles = 0x3;
cycles = 0x7f;
}
coded_cycles <<= 7;
}
coded_cycles |= cycles % 128;
return coded_cycles;
}
#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */ #endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7