soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 consecutive lines

Change the RACPREFDATA(x) setting to prefetch the next 256-byte line
after 4 consecutive lines have been used, instead of after 2 consecutive
lines. This does improve the synthetic memcpy benchmark by an additional
+0.5% on top of the previous change for Cortex-A72 CPUs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

drivers/soc/bcm/brcmstb/biuctrl.c

@@ -174,7 +174,7 @@ static const u32 a72_b53_mach_compat[] = {
 static void __init a72_b53_rac_enable_all(struct device_node *np)
 {
 	unsigned int cpu;
-	u32 enable = 0, pref_dist;
+	u32 enable = 0, pref_dist, shift;
 
 	if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
 		return;
@@ -184,10 +184,14 @@ static void __init a72_b53_rac_enable_all(struct device_node *np)
 
 	pref_dist = cbc_readl(RAC_CONFIG1_REG);
 	for_each_possible_cpu(cpu) {
+		shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
 		enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
-		if (cpubiuctrl_regs == a72_cpubiuctrl_regs)
+		if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+			enable &= ~(RACENPREF_MASK << shift);
+			enable |= 3 << shift;
 			pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
 		}
+	}
 
 	cbc_writel(enable, RAC_CONFIG0_REG);
 	cbc_writel(pref_dist, RAC_CONFIG1_REG);