dt-bindings: stm32: convert dfsdm to json-schema

Convert the STM32 DFSDM bindings to DT schema format
using json-schema.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt

-STMicroelectronics STM32 DFSDM ADC device driver
-
-
-STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
-interface external sigma delta modulators to STM32 micro controllers.
-It is mainly targeted for:
-- Sigma delta modulators (motor control, metering...)
-- PDM microphones (audio digital microphone)
-
-It features up to 8 serial digital interfaces (SPI or Manchester) and
-up to 4 filters on stm32h7 or 6 filters on stm32mp1.
-
-Each child node match with a filter instance.
-
-Contents of a STM32 DFSDM root node:
-------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32h7-dfsdm"
-  "st,stm32mp1-dfsdm"
-- reg: Offset and length of the DFSDM block register set.
-- clocks: IP and serial interfaces clocking. Should be set according
-		to rcc clock ID and "clock-names".
-- clock-names: Input clock name "dfsdm" must be defined,
-		"audio" is optional. If defined CLKOUT is based on the audio
-		clock, else "dfsdm" is used.
-- #interrupt-cells = <1>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- spi-max-frequency: Requested only for SPI master mode.
-		  SPI clock OUT frequency (Hz). This clock must be set according
-		  to "clock" property. Frequency must be a multiple of the rcc
-		  clock frequency. If not, SPI CLKOUT frequency will not be
-		  accurate.
-- pinctrl-names:	Set to "default".
-- pinctrl-0:		List of phandles pointing to pin configuration
-			nodes to set pins in mode of operation for dfsdm
-			on external pin.
-
-Contents of a STM32 DFSDM child nodes:
---------------------------------------
-
-Required properties:
-- compatible: Must be:
-	"st,stm32-dfsdm-adc" for sigma delta ADCs
-	"st,stm32-dfsdm-dmic" for audio digital microphone.
-- reg: Specifies the DFSDM filter instance used.
-	Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
-- interrupts: IRQ lines connected to each DFSDM filter instance.
-- st,adc-channels:	List of single-ended channels muxed for this ADC.
-			valid values:
-				"st,stm32h7-dfsdm" compatibility: 0 to 7.
-- st,adc-channel-names:	List of single-ended channel names.
-- st,filter-order:  SinC filter order from 0 to 5.
-			0: FastSinC
-			[1-5]: order 1 to 5.
-			For audio purpose it is recommended to use order 3 to 5.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
-
-Required properties for "st,stm32-dfsdm-adc" compatibility:
-- io-channels: From common IIO binding. Used to pipe external sigma delta
-		modulator or internal ADC output to DFSDM channel.
-		This is not required for "st,stm32-dfsdm-pdm" compatibility as
-		PDM microphone is binded in Audio DT node.
-
-Required properties for "st,stm32-dfsdm-pdm" compatibility:
-- #sound-dai-cells: Must be set to 0.
-- dma: DMA controller phandle and DMA request line associated to the
-		filter instance (specified by the field "reg")
-- dma-names: Must be "rx"
-
-Optional properties:
-- st,adc-channel-types:	Single-ended channel input type.
-			- "SPI_R": SPI with data on rising edge (default)
-			- "SPI_F": SPI with data on falling edge
-			- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
-			- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
-- st,adc-channel-clk-src: Conversion clock source.
-			  - "CLKIN": external SPI clock (CLKIN x)
-			  - "CLKOUT": internal SPI clock (CLKOUT) (default)
-			  - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
-			  - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
-
-- st,adc-alt-channel: Must be defined if two sigma delta modulator are
-			  connected on same SPI input.
-			  If not set, channel n is connected to SPI input n.
-			  If set, channel n is connected to SPI input n + 1.
-
-- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
-		   Used for multi microphones synchronization.
-
-Example of a sigma delta adc connected on DFSDM SPI port 0
-and a pdm microphone connected on DFSDM SPI port 1:
-
-	ads1202: simple_sd_adc@0 {
-		compatible = "ads1202";
-		#io-channel-cells = <1>;
-	};
-
-	dfsdm: dfsdm@40017000 {
-		compatible = "st,stm32h7-dfsdm";
-		reg = <0x40017000 0x400>;
-		clocks = <&rcc DFSDM1_CK>;
-		clock-names = "dfsdm";
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dfsdm_adc0: filter@0 {
-			compatible = "st,stm32-dfsdm-adc";
-			#io-channel-cells = <1>;
-			reg = <0>;
-			interrupts = <110>;
-			st,adc-channels = <0>;
-			st,adc-channel-names = "sd_adc0";
-			st,adc-channel-types = "SPI_F";
-			st,adc-channel-clk-src = "CLKOUT";
-			io-channels = <&ads1202 0>;
-			st,filter-order = <3>;
-		};
-		dfsdm_pdm1: filter@1 {
-			compatible = "st,stm32-dfsdm-dmic";
-			reg = <1>;
-			interrupts = <111>;
-			dmas = <&dmamux1 102 0x400 0x00>;
-			dma-names = "rx";
-			st,adc-channels = <1>;
-			st,adc-channel-names = "dmic1";
-			st,adc-channel-types = "SPI_R";
-			st,adc-channel-clk-src = "CLKOUT";
-			st,filter-order = <5>;
-		};
-	}

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/st,stm32-dfsdm-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DFSDM ADC device driver
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description: |
+  STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+  interface external sigma delta modulators to STM32 micro controllers.
+  It is mainly targeted for:
+  - Sigma delta modulators (motor control, metering...)
+  - PDM microphones (audio digital microphone)
+
+  It features up to 8 serial digital interfaces (SPI or Manchester) and
+  up to 4 filters on stm32h7 or 6 filters on stm32mp1.
+
+  Each child node matches with a filter instance.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-dfsdm
+      - st,stm32mp1-dfsdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description:
+          Internal clock used for DFSDM digital processing and control blocks.
+          dfsdm clock can also feed CLKOUT, when CLKOUT is used.
+      - description: audio clock can be used as an alternate to feed CLKOUT.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: dfsdm
+      - const: audio
+    minItems: 1
+    maxItems: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-max-frequency:
+    description:
+      SPI clock OUT frequency (Hz). Requested only for SPI master mode.
+      This clock must be set according to the "clock" property.
+      Frequency must be a multiple of the rcc clock frequency.
+      If not, SPI CLKOUT frequency will not be accurate.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^filter@[0-9]+$":
+    type: object
+    description: child node
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32-dfsdm-adc
+          - st,stm32-dfsdm-dmic
+
+      reg:
+        description: Specifies the DFSDM filter instance used.
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC.
+          On stm32h7 and stm32mp1:
+          - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
+          - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              minimum: 0
+              maximum: 7
+
+      st,adc-channel-names:
+        description: List of single-ended channel names.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string-array
+
+      st,filter-order:
+        description: |
+          SinC filter order from 0 to 5.
+          - 0: FastSinC
+          - [1-5]: order 1 to 5.
+          For audio purpose it is recommended to use order 3 to 5.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - items:
+              minimum: 0
+              maximum: 5
+
+      "#io-channel-cells":
+        const: 1
+
+      st,adc-channel-types:
+        description: |
+          Single-ended channel input type.
+          - "SPI_R": SPI with data on rising edge (default)
+          - "SPI_F": SPI with data on falling edge
+          - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+          - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+        items:
+          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-channel-clk-src:
+        description: |
+          Conversion clock source.
+          - "CLKIN": external SPI clock (CLKIN x)
+          - "CLKOUT": internal SPI clock (CLKOUT) (default)
+          - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+          - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+        items:
+          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-alt-channel:
+        description:
+          Must be defined if two sigma delta modulators are
+          connected on same SPI input.
+          If not set, channel n is connected to SPI input n.
+          If set, channel n is connected to SPI input n + 1.
+        type: boolean
+
+      st,filter0-sync:
+        description:
+          Set to 1 to synchronize with DFSDM filter instance 0.
+          Used for multi microphones synchronization.
+        type: boolean
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        items:
+          - const: rx
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - st,adc-channels
+      - st,adc-channel-names
+      - st,filter-order
+      - "#io-channel-cells"
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-adc
+
+      - then:
+          properties:
+            st,adc-channels:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-names:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-types:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-clk-src:
+              minItems: 1
+              maxItems: 8
+
+            io-channels:
+              description:
+                From common IIO binding. Used to pipe external sigma delta
+                modulator or internal ADC output to DFSDM channel.
+                This is not required for "st,stm32-dfsdm-pdm" compatibility as
+                PDM microphone is binded in Audio DT node.
+
+          required:
+            - io-channels
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-dmic
+
+      - then:
+          properties:
+            st,adc-channels:
+              maxItems: 1
+
+            st,adc-channel-names:
+              maxItems: 1
+
+            st,adc-channel-types:
+              maxItems: 1
+
+            st,adc-channel-clk-src:
+              maxItems: 1
+
+          required:
+            - dmas
+            - dma-names
+
+          patternProperties:
+            "^dfsdm-dai+$":
+              type: object
+              description: child node
+
+              properties:
+                "#sound-dai-cells":
+                  const: 0
+
+                io-channels:
+                  description:
+                    From common IIO binding. Used to pipe external sigma delta
+                    modulator or internal ADC output to DFSDM channel.
+
+              required:
+                - "#sound-dai-cells"
+                - io-channels
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-dfsdm
+
+  - then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-dfsdm
+
+  - then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 5
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dfsdm: dfsdm@4400d000 {
+      compatible = "st,stm32mp1-dfsdm";
+      reg = <0x4400d000 0x800>;
+      clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
+      clock-names = "dfsdm", "audio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dfsdm0: filter@0 {
+        compatible = "st,stm32-dfsdm-dmic";
+        reg = <0>;
+        interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 101 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <1>;
+        st,adc-channel-names = "dmic0";
+        st,adc-channel-types = "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT";
+        st,filter-order = <5>;
+
+        asoc_pdm0: dfsdm-dai {
+          compatible = "st,stm32h7-dfsdm-dai";
+          #sound-dai-cells = <0>;
+          io-channels = <&dfsdm0 0>;
+        };
+      };
+
+      dfsdm_pdm1: filter@1 {
+        compatible = "st,stm32-dfsdm-adc";
+        reg = <1>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 102 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <2 3>;
+        st,adc-channel-names = "in2", "in3";
+        st,adc-channel-types = "SPI_R", "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
+        io-channels = <&sd_adc2 &sd_adc3>;
+        st,filter-order = <1>;
+      };
+    };
+
+...