Skip to content

L
linux
Commit 12b00b39 authored by Anton Altaparmakov's avatar Anton Altaparmakov
Browse files
Options

Merge cantab.net:/home/src/bklinux-2.6 

into cantab.net:/home/src/ntfs-2.6
parents 4a952349 16bd7135
Hide whitespace changes
Inline Side-by-side
Showing with 841 additions and 823 deletions
Makefile
View file @ 12b00b39
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 6
EXTRAVERSION =-rc2
EXTRAVERSION =-rc3
NAME=Zonked Quokka
# *DOCUMENTATION*
......
arch/ppc/4xx_io/serial_sicc.c
View file @ 12b00b39
......@@ -763,7 +763,7 @@ static void siccuart_change_speed(struct SICC_info *info, struct termios *old_te
cflag = info->tty->termios->c_cflag;
#if DEBUG
#ifdef DEBUG
printk("siccuart_set_cflag(0x%x) called\n", cflag);
#endif
/* byte size and parity */
......@@ -1027,7 +1027,7 @@ static void siccuart_flush_buffer(struct tty_struct *tty)
struct SICC_info *info = tty->driver_data;
unsigned long flags;
#if DEBUG
#ifdef DEBUG
printk("siccuart_flush_buffer(%d) called\n", tty->index);
#endif
save_flags(flags); cli();
......@@ -1433,7 +1433,7 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp)
state = info->state;
#if DEBUG
#ifdef DEBUG
//printk("siccuart_close() called\n");
#endif
......@@ -1544,7 +1544,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
timeout = 2 * info->timeout;
expire = jiffies + timeout;
#if DEBUG
#ifdef DEBUG
printk("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n",
tty->index, jiffies,
expire, char_time);
......@@ -1831,7 +1831,7 @@ static int siccuart_console_read(struct console *co, const char *s, u_int count)
unsigned int status;
char *w;
int c;
#if DEBUG
#ifdef DEBUG
printk("siccuart_console_read() called\n");
#endif
......
arch/ppc/8260_io/uart.c
View file @ 12b00b39
......@@ -155,7 +155,7 @@ static unsigned long break_pressed; /* break, really ... */
static struct serial_state rs_table[] = {
/* UART CLK PORT IRQ FLAGS NUM */
{ 0, 0, PROFF_SMC1, SIU_INT_SMC1, 0, 0 }, /* SMC1 ttyS0 */
#if USE_SMC2
#ifdef USE_SMC2
{ 0, 0, PROFF_SMC2, SIU_INT_SMC2, 0, 1 }, /* SMC2 ttyS1 */
#endif
#ifndef CONFIG_SCC1_ENET
......@@ -2565,7 +2565,7 @@ static int __init rs_8xx_init(void)
io->iop_pdird |= 0x00400000;
io->iop_pdird &= ~0x00800000;
io->iop_psord &= ~0x00c00000;
#if USE_SMC2
#ifdef USE_SMC2
io->iop_ppara |= 0x00c00000;
io->iop_pdira |= 0x00400000;
io->iop_pdira &= ~0x00800000;
......
arch/ppc/Kconfig
View file @ 12b00b39
......@@ -609,7 +609,7 @@ config PPC_OF
config PPC_GEN550
bool
depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS
depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE
default y
config FORCE
......@@ -627,9 +627,14 @@ config EPIC_SERIAL_MODE
depends on 6xx && (LOPEC || SANDPOINT)
default y
config MPC10X_BRIDGE
bool
depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on FORCE || SANDPOINT
depends on MPC10X_BRIDGE
config CPC710_DATA_GATHERING
bool "Enable CPC710 data gathering"
......
arch/ppc/boot/images/Makefile
View file @ 12b00b39
......@@ -13,7 +13,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
quite_cmd_uimage = UIMAGE $@
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
-C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-d $< $@
......
arch/ppc/boot/openfirmware/Makefile
View file @ 12b00b39
......@@ -75,7 +75,7 @@ $(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE
$(call if_changed,genimage-initrd)
# Create the note section for New-World PowerMacs.
quit_cmd_mknote = MKNOTE $@
quiet_cmd_mknote = MKNOTE $@
cmd_mknote = $(utils)/mknote > $@
targets += note
$(obj)/note: $(utils)/mknote FORCE
......
arch/ppc/boot/simple/misc-embedded.c
View file @ 12b00b39
......@@ -8,7 +8,6 @@
#include <linux/config.h>
#include <linux/types.h>
#include <linux/elf.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/mmu.h>
......
arch/ppc/boot/simple/misc.c
View file @ 12b00b39
......@@ -17,7 +17,6 @@
*/
#include <linux/types.h>
#include <linux/elf.h>
#include <linux/config.h>
#include <linux/string.h>
......
arch/ppc/configs/mcpn765_defconfig
View file @ 12b00b39
......@@ -4,49 +4,65 @@
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_KMOD is not set
#
# Platform support
# Processor
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
CONFIG_ALTIVEC=y
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
CONFIG_PPC_STD_MMU=y
#
# IBM 4xx options
# Platform options
#
# CONFIG_8260 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
# CONFIG_WILLOW_2 is not set
# CONFIG_WILLOW is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
......@@ -62,33 +78,28 @@ CONFIG_MCPN765=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX6 is not set
# CONFIG_TQM8260 is not set
CONFIG_PPC_GEN550=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_ALTIVEC=y
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
CONFIG_HIGHMEM=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# Parallel port support
# Bus options
#
# CONFIG_PARPORT is not set
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
#
# Advanced setup
......@@ -104,20 +115,27 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
......@@ -126,36 +144,85 @@ CONFIG_BOOT_LOAD=0x00800000
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -164,6 +231,10 @@ CONFIG_BLK_DEV_INITRD=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -175,7 +246,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -187,32 +257,17 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_NETFILTER is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# QoS and/or fair queueing
......@@ -233,7 +288,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
......@@ -248,26 +302,15 @@ CONFIG_MII=y
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
......@@ -277,7 +320,6 @@ CONFIG_NET_PCI=y
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -287,7 +329,6 @@ CONFIG_NET_PCI=y
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
......@@ -297,10 +338,9 @@ CONFIG_NET_PCI=y
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
# Token Ring devices
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_TR is not set
#
# Wan interfaces
......@@ -317,15 +357,22 @@ CONFIG_NET_PCI=y
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Graphics support
# Telephony Support
#
# CONFIG_FB is not set
# CONFIG_PHONE is not set
#
# Input device support
......@@ -342,18 +389,16 @@ CONFIG_NET_PCI=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -361,6 +406,7 @@ CONFIG_SOUND_GAMEPORT=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -369,26 +415,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -414,7 +442,15 @@ CONFIG_GEN_RTC=y
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
......@@ -426,10 +462,31 @@ CONFIG_GEN_RTC=y
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
......@@ -457,21 +514,16 @@ CONFIG_GEN_RTC=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
......@@ -484,19 +536,15 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
......@@ -505,25 +553,14 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
# Native Language Support
#
# CONFIG_BT is not set
# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_CRC32=y
#
# Kernel hacking
......
arch/ppc/configs/pcore_defconfig
View file @ 12b00b39
......@@ -4,11 +4,17 @@
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
......@@ -18,9 +24,16 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
......@@ -33,24 +46,25 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
# Platform support
# Processor
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
CONFIG_ALTIVEC=y
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
CONFIG_PPC_STD_MMU=y
#
# IBM 4xx options
# Platform options
#
# CONFIG_8260 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
# CONFIG_WILLOW_2 is not set
# CONFIG_WILLOW is not set
CONFIG_PCORE=y
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
......@@ -66,35 +80,30 @@ CONFIG_PCORE=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX6 is not set
# CONFIG_TQM8260 is not set
CONFIG_PPC_GEN550=y
CONFIG_FORCE=y
# CONFIG_MPC10X_STORE_GATHERING is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_ALTIVEC=y
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_HIGHMEM is not set
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# General setup
# Bus options
#
# CONFIG_HIGHMEM is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_PPC601_SYNC_FIX=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# Advanced setup
......@@ -110,15 +119,27 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Device Drivers
#
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
......@@ -130,24 +151,22 @@ CONFIG_BOOT_LOAD=0x00800000
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
......@@ -164,9 +183,15 @@ CONFIG_BLK_DEV_SR=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
......@@ -176,11 +201,9 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
......@@ -188,39 +211,40 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -229,6 +253,10 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -240,8 +268,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -255,12 +281,21 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
......@@ -272,11 +307,13 @@ CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
......@@ -286,15 +323,15 @@ CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
......@@ -305,21 +342,19 @@ CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -347,7 +382,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
......@@ -362,13 +396,22 @@ CONFIG_MII=y
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
......@@ -394,6 +437,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -412,11 +456,13 @@ CONFIG_EEPRO100=y
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -434,19 +480,21 @@ CONFIG_EEPRO100=y
# CONFIG_IRDA is not set
#
# ISDN subsystem
# Bluetooth support
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Graphics support
# ISDN subsystem
#
# CONFIG_FB is not set
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
# Telephony Support
#
# CONFIG_CD_NO_IDESCSI is not set
# CONFIG_PHONE is not set
#
# Input device support
......@@ -463,18 +511,16 @@ CONFIG_EEPRO100=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -482,6 +528,7 @@ CONFIG_SOUND_GAMEPORT=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -490,26 +537,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
CONFIG_BUSMOUSE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -535,7 +564,15 @@ CONFIG_GEN_RTC=y
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
......@@ -547,6 +584,26 @@ CONFIG_GEN_RTC=y
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
......@@ -584,10 +641,11 @@ CONFIG_FS_MBCACHE=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
......@@ -596,6 +654,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -612,12 +671,13 @@ CONFIG_RAMFS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......@@ -632,31 +692,20 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
#
# Sound
# Native Language Support
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_CRC32=y
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
#
# Security options
......
arch/ppc/kernel/cputable.c
View file @ 12b00b39
......@@ -53,10 +53,19 @@ extern void __setup_cpu_generic(unsigned long offset, int cpu_nr, struct cpu_spe
#define PPC_FEATURE_ALTIVEC_COMP 0
#endif
/* We need to mark all pages as being coherent if we're SMP or we
* have a 754x and an MPC107 host bridge. */
#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT
#else
#define CPU_FTR_COMMON 0
#endif
struct cpu_spec cpu_specs[] = {
#if CLASSIC_PPC
{ /* 601 */
0xffff0000, 0x00010000, "601",
CPU_FTR_COMMON |
CPU_FTR_601 | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_601_INSTR | PPC_FEATURE_UNIFIED_CACHE,
32, 32,
......@@ -64,6 +73,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 603 */
0xffff0000, 0x00030000, "603",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -72,6 +82,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 603e */
0xffff0000, 0x00060000, "603e",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -80,6 +91,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 603ev */
0xffff0000, 0x00070000, "603ev",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -88,6 +100,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 604 */
0xffff0000, 0x00040000, "604",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
CPU_FTR_HPTE_TABLE,
COMMON_PPC,
......@@ -96,6 +109,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 604e */
0xfffff000, 0x00090000, "604e",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
CPU_FTR_HPTE_TABLE,
COMMON_PPC,
......@@ -104,6 +118,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 604r */
0xffff0000, 0x00090000, "604r",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
CPU_FTR_HPTE_TABLE,
COMMON_PPC,
......@@ -112,6 +127,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 604ev */
0xffff0000, 0x000a0000, "604ev",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
CPU_FTR_HPTE_TABLE,
COMMON_PPC,
......@@ -120,6 +136,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 740/750 (0x4202, don't support TAU ?) */
0xffffffff, 0x00084202, "740/750",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -128,6 +145,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 745/755 */
0xfffff000, 0x00083000, "745/755",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -136,6 +154,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750CX (80100 and 8010x?) */
0xfffffff0, 0x00080100, "750CX",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -144,6 +163,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750CX (82201 and 82202) */
0xfffffff0, 0x00082200, "750CX",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -152,6 +172,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750CXe (82214) */
0xfffffff0, 0x00082210, "750CXe",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -160,6 +181,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750FX rev 1.x */
0xffffff00, 0x70000100, "750FX",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM,
......@@ -169,6 +191,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750FX rev 2.0 must disable HID0[DPM] */
0xffffffff, 0x70000200, "750FX",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
CPU_FTR_NO_DPM,
......@@ -178,6 +201,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 750FX (All revs except 2.0) */
0xffff0000, 0x70000000, "750FX",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
......@@ -188,6 +212,7 @@ struct cpu_spec cpu_specs[] = {
{ /* 740/750 (L2CR bit need fixup for 740) */
0xffff0000, 0x00080000, "740/750",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
COMMON_PPC,
......@@ -196,6 +221,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7400 rev 1.1 ? (no TAU) */
0xffffffff, 0x000c1101, "7400 (1.1)",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
CPU_FTR_CAN_NAP,
......@@ -205,6 +231,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7400 */
0xffff0000, 0x000c0000, "7400",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
CPU_FTR_CAN_NAP,
......@@ -214,6 +241,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7410 */
0xffff0000, 0x800c0000, "7410",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
CPU_FTR_CAN_NAP,
......@@ -223,6 +251,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7450 2.0 - no doze/nap */
0xffffffff, 0x80000200, "7450",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
......@@ -232,6 +261,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7450 2.1 */
0xffffffff, 0x80000201, "7450",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
......@@ -242,6 +272,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7450 2.3 and newer */
0xffff0000, 0x80000000, "7450",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR,
......@@ -251,6 +282,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7455 rev 1.x */
0xffffff00, 0x80010100, "7455",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS,
......@@ -260,6 +292,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7455 rev 2.0 */
0xffffffff, 0x80010200, "7455",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
......@@ -270,6 +303,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7455 others */
0xffff0000, 0x80010000, "7455",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
......@@ -280,6 +314,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 7457 */
0xffff0000, 0x80020000, "7457",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
......@@ -290,6 +325,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* 82xx (8240, 8245, 8260 are all 603e cores) */
0x7fff0000, 0x00810000, "82xx",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB,
COMMON_PPC,
32, 32,
......@@ -297,6 +333,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
0x00000000, 0x00000000, "(generic PPC)",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC,
32, 32,
......@@ -306,6 +343,7 @@ struct cpu_spec cpu_specs[] = {
#ifdef CONFIG_PPC64BRIDGE
{ /* Power3 */
0xffff0000, 0x00400000, "Power3 (630)",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_64,
128, 128,
......@@ -313,6 +351,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* Power3+ */
0xffff0000, 0x00410000, "Power3 (630+)",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_64,
128, 128,
......@@ -320,6 +359,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* I-star */
0xffff0000, 0x00360000, "I-star",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_64,
128, 128,
......@@ -327,6 +367,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* S-star */
0xffff0000, 0x00370000, "S-star",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_64,
128, 128,
......@@ -336,6 +377,7 @@ struct cpu_spec cpu_specs[] = {
#ifdef CONFIG_POWER4
{ /* Power4 */
0xffff0000, 0x00350000, "Power4",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
COMMON_PPC | PPC_FEATURE_64,
128, 128,
......@@ -343,6 +385,7 @@ struct cpu_spec cpu_specs[] = {
},
{ /* PPC970 */
0xffff0000, 0x00390000, "PPC970",
CPU_FTR_COMMON |
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP,
COMMON_PPC | PPC_FEATURE_64 | PPC_FEATURE_ALTIVEC_COMP,
......@@ -494,7 +537,7 @@ struct cpu_spec cpu_specs[] = {
#if !CLASSIC_PPC
{ /* default match */
0x00000000, 0x00000000, "(generic PPC)",
0,
CPU_FTR_COMMON,
PPC_FEATURE_32,
32, 32,
0,
......
arch/ppc/kernel/process.c
View file @ 12b00b39
......@@ -273,8 +273,8 @@ void show_regs(struct pt_regs * regs)
trap = TRAP(regs);
if (trap == 0x300 || trap == 0x600)
printk("DAR: %08lX, DSISR: %08lX\n", regs->dar, regs->dsisr);
printk("TASK = %p[%d] '%s' ",
current, current->pid, current->comm);
printk("TASK = %p[%d] '%s' THREAD: %p",
current, current->pid, current->comm, current->thread_info);
printk("Last syscall: %ld ", current->thread.last_syscall);
#if defined(CONFIG_4xx) && defined(DCRN_PLB0_BEAR)
......@@ -303,6 +303,16 @@ void show_regs(struct pt_regs * regs)
break;
}
printk("\n");
#ifdef CONFIG_KALLSYMS
/*
* Lookup NIP late so we have the best change of getting the
* above info out without failing
*/
printk("NIP [%08lx] ", regs->nip);
print_symbol("%s\n", regs->nip);
printk("LR [%08lx] ", regs->link);
print_symbol("%s\n", regs->link);
#endif
show_stack(current, (unsigned long *) regs->gpr[1]);
}
......
arch/ppc/kernel/signal.c
View file @ 12b00b39
......@@ -361,7 +361,7 @@ handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
return;
badframe:
#if DEBUG_SIG
#ifdef DEBUG_SIG
printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
......@@ -513,7 +513,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
return;
badframe:
#if DEBUG_SIG
#ifdef DEBUG_SIG
printk("badframe in handle_signal, regs=%p frame=%lx newsp=%lx\n",
regs, frame, *newspp);
#endif
......
arch/ppc/mm/hashtable.S
View file @ 12b00b39
......@@ -346,9 +346,9 @@ _GLOBAL(create_hpte)
rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */
ori r8,r8,0xe14 /* clear out reserved bits and M */
andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */
#ifdef CONFIG_SMP
BEGIN_FTR_SECTION
ori r8,r8,_PAGE_COHERENT /* set M (coherence required) */
#endif
END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
/* Construct the high word of the PPC-style PTE (r5) */
#ifndef CONFIG_PPC64BRIDGE
......
arch/ppc/mm/ppc_mmu.c
View file @ 12b00b39
......@@ -137,10 +137,10 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
int wimgxpp;
union ubat *bat = BATS[index];
#ifdef CONFIG_SMP
if ((flags & _PAGE_NO_CACHE) == 0)
if (((flags & _PAGE_NO_CACHE) == 0) &&
(cur_cpu_spec[0]->cpu_features & CPU_FTR_NEED_COHERENT))
flags |= _PAGE_COHERENT;
#endif
bl = (size >> 17) - 1;
if (PVR_VER(mfspr(PVR)) != 1) {
/* 603, 604, etc. */
......
arch/ppc/platforms/Makefile
View file @ 12b00b39
......@@ -35,11 +35,11 @@ obj-$(CONFIG_EV64260) += ev64260_setup.o
obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o
obj-$(CONFIG_K2) += k2_setup.o k2_pci.o
obj-$(CONFIG_LOPEC) += lopec_setup.o lopec_pci.o
obj-$(CONFIG_MCPN765) += mcpn765_setup.o mcpn765_pci.o
obj-$(CONFIG_MCPN765) += mcpn765.o
obj-$(CONFIG_MENF1) += menf1_setup.o menf1_pci.o
obj-$(CONFIG_MVME5100) += mvme5100_setup.o mvme5100_pci.o
obj-$(CONFIG_PAL4) += pal4_setup.o pal4_pci.o
obj-$(CONFIG_PCORE) += pcore_setup.o pcore_pci.o
obj-$(CONFIG_PCORE) += pcore.o
obj-$(CONFIG_POWERPMC250) += powerpmc250.o
obj-$(CONFIG_PPLUS) += pplus.o
obj-$(CONFIG_PRPMC750) += prpmc750_setup.o prpmc750_pci.o
......
arch/ppc/platforms/gemini_setup.c
View file @ 12b00b39
......@@ -401,12 +401,12 @@ gemini_set_rtc_time( unsigned long now )
to_tm( now, &tm );
reg = gemini_rtc_read(M48T35_RTC_CONTROL);
#if DEBUG_RTC
#ifdef DEBUG_RTC
printk("set rtc: reg = %x\n", reg);
#endif
gemini_rtc_write((reg|M48T35_RTC_SET), M48T35_RTC_CONTROL);
#if DEBUG_RTC
#ifdef DEBUG_RTC
printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n",
tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year);
#endif
......
arch/ppc/platforms/mcpn765_setup.c → arch/ppc/platforms/mcpn765.c
View file @ 12b00b39
/*
* arch/ppc/platforms/mcpn765_setup.c
* arch/ppc/platforms/mcpn765.c
*
* Board setup routines for the Motorola MCG MCPN765 cPCI Board.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* Modified by Randy Vinson (rvinson@mvista.com)
*
* 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
......@@ -28,18 +30,22 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#if 0
#include <linux/ide.h>
#endif
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h> /* for linux/serial_core.h */
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/time.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
......@@ -48,8 +54,10 @@
#include <asm/i8259.h>
#include <asm/todc.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
#include <asm/pplus.h>
#include <asm/hawk.h>
#include <asm/kgdb.h>
#include "mcpn765.h"
......@@ -75,69 +83,229 @@ static u_char mcpn765_openpic_initsenses[] __initdata = {
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */
};
extern void mcpn765_set_VIA_IDE_native(void);
extern u_int openpic_irq(void);
extern char cmd_line[];
extern void gen550_progress(char *, unsigned short);
extern void gen550_init(int, struct uart_port *);
int use_of_interrupt_tree = 0;
static void mcpn765_halt(void);
TODC_ALLOC();
#if defined(CONFIG_SERIAL_8250) && \
(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
static void __init
mcpn765_early_serial_map(void)
/*
* Motorola MCG MCPN765 interrupt routing.
*/
static inline int
mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 14, 0, 0, 0 }, /* IDSEL 11 - have to manually set */
{ 0, 0, 0, 0 }, /* IDSEL 12 - unused */
{ 0, 0, 0, 0 }, /* IDSEL 13 - unused */
{ 18, 0, 0, 0 }, /* IDSEL 14 - Enet 0 */
{ 0, 0, 0, 0 }, /* IDSEL 15 - unused */
{ 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */
{ 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */
{ 0, 0, 0, 0 }, /* IDSEL 18 - PMC 2B Connector XXXX */
{ 29, 0, 0, 0 }, /* IDSEL 19 - Enet 1 */
{ 20, 0, 0, 0 }, /* IDSEL 20 - 21554 cPCI bridge */
};
const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
void __init
mcpn765_set_VIA_IDE_legacy(void)
{
struct uart_port serial_req;
unsigned short vend, dev;
early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
if ((vend == PCI_VENDOR_ID_VIA) &&
(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
unsigned char temp;
/* put back original "standard" port base addresses */
early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
PCI_BASE_ADDRESS_0, 0x1f1);
early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
PCI_BASE_ADDRESS_1, 0x3f5);
early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
PCI_BASE_ADDRESS_2, 0x171);
early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
PCI_BASE_ADDRESS_3, 0x375);
early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
PCI_BASE_ADDRESS_4, 0xcc01);
/* put into legacy mode */
early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
&temp);
temp &= ~0x05;
early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
temp);
}
}
/* Setup serial port access */
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = UART_CLK;
serial_req.irq = 17;
serial_req.flags = STD_COM_FLAGS;
serial_req.iotype = SERIAL_IO_MEM;
serial_req.membase = (u_char *)MCPN765_SERIAL_1;
serial_req.regshift = 4;
void
mcpn765_set_VIA_IDE_native(void)
{
unsigned short vend, dev;
early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
gen550_init(0, &serial_req);
if ((vend == PCI_VENDOR_ID_VIA) &&
(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 0 failed\n");
unsigned char temp;
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 1;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_2;
/* put into native mode */
early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
&temp);
temp |= 0x05;
early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
temp);
}
}
gen550_init(1, &serial_req);
/*
* Initialize the VIA 82c586b.
*/
static void __init
mcpn765_setup_via_82c586b(void)
{
struct pci_dev *dev;
u_char c;
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_0,
NULL)) == NULL) {
printk("No VIA ISA bridge found\n");
mcpn765_halt();
/* NOTREACHED */
}
/*
* If the firmware left the EISA 4d0/4d1 ports enabled, make sure
* IRQ 14 is set for edge.
*/
pci_read_config_byte(dev, 0x47, &c);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 1 failed\n");
if (c & (1<<5)) {
c = inb(0x4d1);
c &= ~(1<<6);
outb(c, 0x4d1);
}
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 2;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_3;
/* Disable PNP IRQ routing since we use the Hawk's MPIC */
pci_write_config_dword(dev, 0x54, 0);
pci_write_config_byte(dev, 0x58, 0);
gen550_init(2, &serial_req);
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 2 failed\n");
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1,
NULL)) == NULL) {
printk("No VIA ISA bridge found\n");
mcpn765_halt();
/* NOTREACHED */
}
/* Assume early_serial_setup() doesn't modify serial_req */
serial_req.line = 3;
serial_req.irq = 17;
serial_req.membase = (u_char *)MCPN765_SERIAL_4;
/*
* PPCBug doesn't set the enable bits for the IDE device.
* Turn them on now.
*/
pci_read_config_byte(dev, 0x40, &c);
c |= 0x03;
pci_write_config_byte(dev, 0x40, c);
gen550_init(3, &serial_req);
return;
}
if (early_serial_setup(&serial_req) != 0)
printk(KERN_ERR "Early serial init of port 3 failed\n");
void __init
mcpn765_pcibios_fixup(void)
{
/* Do MCPN765 board specific initialization. */
mcpn765_setup_via_82c586b();
}
#endif
void __init
mcpn765_find_bridges(void)
{
struct pci_controller *hose;
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
MCPN765_PCI_IO_START,
MCPN765_PCI_IO_END,
IORESOURCE_IO,
"PCI host bridge");
pci_init_resource(&hose->mem_resources[0],
MCPN765_PCI_MEM_START,
MCPN765_PCI_MEM_END,
IORESOURCE_MEM,
"PCI host bridge");
hose->io_space.start = MCPN765_PCI_IO_START;
hose->io_space.end = MCPN765_PCI_IO_END;
hose->mem_space.start = MCPN765_PCI_MEM_START;
hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE;
if (hawk_init(hose,
MCPN765_HAWK_PPC_REG_BASE,
MCPN765_PROC_PCI_MEM_START,
MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
MCPN765_PROC_PCI_IO_START,
MCPN765_PROC_PCI_IO_END,
MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) {
printk("Could not initialize HAWK bridge\n");
}
/* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config
* will reassign the bars outside of 16-bit I/O space, which will
* "break" things. To prevent this, we'll set the IDE chip into
* legacy mode and seed the bars with their legacy addresses (in 16-bit
* I/O space). The Auto Config code will skip the IDE contoller in
* legacy mode, so our bar values will stick.
*/
mcpn765_set_VIA_IDE_legacy();
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
/* Now that we've got 16-bit addresses in the bars, we can switch the
* IDE controller back into native mode so we can do "modern" resource
* and interrupt management.
*/
mcpn765_set_VIA_IDE_native();
ppc_md.pcibios_fixup = mcpn765_pcibios_fixup;
ppc_md.pcibios_fixup_bus = NULL;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = mcpn765_map_irq;
return;
}
static void __init
mcpn765_setup_arch(void)
{
......@@ -190,39 +358,9 @@ mcpn765_setup_arch(void)
return;
}
/*
* Initialize the VIA 82c586b.
*/
static void __init
mcpn765_setup_via_82c586b(void)
{
struct pci_dev *dev;
u_char c;
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1,
NULL)) == NULL) {
printk("No VIA ISA bridge found\n");
mcpn765_halt();
/* NOTREACHED */
}
/*
* PPCBug doesn't set the enable bits for the IDE device.
* Turn them on now.
*/
pci_read_config_byte(dev, 0x40, &c);
c |= 0x03;
pci_write_config_byte(dev, 0x40, c);
return;
}
static void __init
mcpn765_init2(void)
{
/* Do MCPN765 board specific initialization. */
mcpn765_setup_via_82c586b();
request_region(0x00,0x20,"dma1");
request_region(0x20,0x20,"pic1");
......@@ -271,7 +409,7 @@ mcpn765_irq_canonicalize(u32 irq)
static unsigned long __init
mcpn765_find_end_of_memory(void)
{
return pplus_get_mem_size(MCPN765_HAWK_SMC_BASE);
return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE);
}
static void __init
......@@ -285,6 +423,9 @@ mcpn765_reset_board(void)
{
local_irq_disable();
/* set VIA IDE controller into native mode */
mcpn765_set_VIA_IDE_native();
/* Set exception prefix high - to the firmware */
_nmask_and_or_msr(0, MSR_IP);
......@@ -328,92 +469,6 @@ mcpn765_show_cpuinfo(struct seq_file *m)
return 0;
}
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
/*
* IDE support.
*/
static int mcpn765_ide_ports_known = 0;
static unsigned long mcpn765_ide_regbase[MAX_HWIFS];
static unsigned long mcpn765_ide_ctl_regbase[MAX_HWIFS];
static unsigned long mcpn765_idedma_regbase;
static void
mcpn765_ide_probe(void)
{
struct pci_dev *pdev = pci_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1,
NULL);
if(pdev) {
mcpn765_ide_regbase[0]=pdev->resource[0].start;
mcpn765_ide_regbase[1]=pdev->resource[2].start;
mcpn765_ide_ctl_regbase[0]=pdev->resource[1].start;
mcpn765_ide_ctl_regbase[1]=pdev->resource[3].start;
mcpn765_idedma_regbase=pdev->resource[4].start;
}
mcpn765_ide_ports_known = 1;
return;
}
static int
mcpn765_ide_default_irq(unsigned long base)
{
if (mcpn765_ide_ports_known == 0)
mcpn765_ide_probe();
if (base == mcpn765_ide_regbase[0])
return 14;
else if (base == mcpn765_ide_regbase[1])
return 14;
else
return 0;
}
static unsigned long
mcpn765_ide_default_io_base(int index)
{
if (mcpn765_ide_ports_known == 0)
mcpn765_ide_probe();
return mcpn765_ide_regbase[index];
}
static void __init
mcpn765_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
unsigned long ctrl_port, int *irq)
{
unsigned long reg = data_port;
uint alt_status_base;
int i;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hw->io_ports[i] = reg++;
}
if (data_port == mcpn765_ide_regbase[0]) {
alt_status_base = mcpn765_ide_ctl_regbase[0] + 2;
hw->irq = 14;
} else if (data_port == mcpn765_ide_regbase[1]) {
alt_status_base = mcpn765_ide_ctl_regbase[1] + 2;
hw->irq = 14;
} else {
alt_status_base = 0;
hw->irq = 0;
}
if (ctrl_port)
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
else
hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
if (irq != NULL)
*irq = hw->irq;
return;
}
#endif
/*
* Set BAT 3 to map 0xf0000000 to end of physical memory space.
*/
......@@ -467,21 +522,11 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.heartbeat_reset = 0;
ppc_md.heartbeat_count = 0;
#if defined(CONFIG_SERIAL_8250) && \
(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
mcpn765_early_serial_map();
#ifdef CONFIG_KGDB
ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
#endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ppc_ide_md.default_irq = mcpn765_ide_default_irq;
ppc_ide_md.default_io_base = mcpn765_ide_default_io_base;
ppc_ide_md.ide_init_hwif = mcpn765_ide_init_hwif_ports;
#ifdef CONFIG_KGDB
ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
#endif
return;
......
arch/ppc/platforms/mcpn765_pci.c deleted 100644 → 0
View file @ 4a952349
/*
* arch/ppc/platforms/mcpn765_pci.c
*
* PCI setup routines for the Motorola MCG MCPN765 cPCI board.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/pplus.h>
#include "mcpn765.h"
/*
* Motorola MCG MCPN765 interrupt routing.
*/
static inline int
mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 14, 0, 0, 0 }, /* IDSEL 11 - have to manually set */
{ 0, 0, 0, 0 }, /* IDSEL 12 - unused */
{ 0, 0, 0, 0 }, /* IDSEL 13 - unused */
{ 18, 0, 0, 0 }, /* IDSEL 14 - Enet 0 */
{ 0, 0, 0, 0 }, /* IDSEL 15 - unused */
{ 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */
{ 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */
{ 0, 0, 0, 0 }, /* IDSEL 18 - PMC 2B Connector XXXX */
{ 29, 0, 0, 0 }, /* IDSEL 19 - Enet 1 */
{ 20, 0, 0, 0 }, /* IDSEL 20 - 21554 cPCI bridge */
};
const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
void __init
mcpn765_find_bridges(void)
{
struct pci_controller *hose;
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
MCPN765_PCI_IO_START,
MCPN765_PCI_IO_END,
IORESOURCE_IO,
"PCI host bridge");
pci_init_resource(&hose->mem_resources[0],
MCPN765_PCI_MEM_START,
MCPN765_PCI_MEM_END,
IORESOURCE_MEM,
"PCI host bridge");
hose->io_space.start = MCPN765_PCI_IO_START;
hose->io_space.end = MCPN765_PCI_IO_END;
hose->mem_space.start = MCPN765_PCI_MEM_START;
hose->mem_space.end = MCPN765_PCI_MEM_END - PPLUS_MPIC_SIZE;
if (pplus_init(hose,
MCPN765_HAWK_PPC_REG_BASE,
MCPN765_PROC_PCI_MEM_START,
MCPN765_PROC_PCI_MEM_END - PPLUS_MPIC_SIZE,
MCPN765_PROC_PCI_IO_START,
MCPN765_PROC_PCI_IO_END,
MCPN765_PCI_MEM_END - PPLUS_MPIC_SIZE + 1) != 0) {
printk("Could not initialize HAWK bridge\n");
}
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pcibios_fixup = NULL;
ppc_md.pcibios_fixup_bus = NULL;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = mcpn765_map_irq;
return;
}
arch/ppc/platforms/pcore_setup.c → arch/ppc/platforms/pcore.c
View file @ 12b00b39
......@@ -23,16 +23,10 @@
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/ide.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/time.h>
......@@ -40,14 +34,122 @@
#include <asm/mpc10x.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/kgdb.h>
#include "pcore.h"
extern int pcore_find_bridges(void);
extern unsigned long loops_per_jiffy;
static int board_type;
static inline int __init
pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{9, 10, 11, 12}, /* IDSEL 24 - DEC 21554 */
{10, 0, 0, 0}, /* IDSEL 25 - DEC 21143 */
{11, 12, 9, 10}, /* IDSEL 26 - PMC I */
{12, 9, 10, 11}, /* IDSEL 27 - PMC II */
{0, 0, 0, 0}, /* IDSEL 28 - unused */
{0, 0, 9, 0}, /* IDSEL 29 - unused */
{0, 0, 0, 0}, /* IDSEL 30 - Winbond */
};
const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
static inline int __init
pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{9, 10, 11, 12}, /* IDSEL 24 - Sentinel */
{10, 0, 0, 0}, /* IDSEL 25 - i82559 #1 */
{11, 12, 9, 10}, /* IDSEL 26 - PMC I */
{12, 9, 10, 11}, /* IDSEL 27 - PMC II */
{9, 0, 0, 0}, /* IDSEL 28 - i82559 #2 */
{0, 0, 0, 0}, /* IDSEL 29 - unused */
{0, 0, 0, 0}, /* IDSEL 30 - Winbond */
};
const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
void __init
pcore_pcibios_fixup(void)
{
struct pci_dev *dev;
if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
PCI_DEVICE_ID_WINBOND_83C553,
0)))
{
/* Reroute interrupts both IDE channels to 15 */
pci_write_config_byte(dev,
PCORE_WINBOND_IDE_INT,
0xff);
/* Route INTA-D to IRQ9-12, respectively */
pci_write_config_word(dev,
PCORE_WINBOND_PCI_INT,
0x9abc);
/*
* Set up 8259 edge/level triggering
*/
outb(0x00, PCORE_WINBOND_PRI_EDG_LVL);
outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL);
}
}
int __init
pcore_find_bridges(void)
{
struct pci_controller* hose;
int host_bridge, board_type;
hose = pcibios_alloc_controller();
if (!hose)
return 0;
mpc10x_bridge_init(hose,
MPC10X_MEM_MAP_B,
MPC10X_MEM_MAP_B,
MPC10X_MAPB_EUMB_BASE);
/* Determine board type */
early_read_config_dword(hose,
0,
PCI_DEVFN(0,0),
PCI_VENDOR_ID,
&host_bridge);
if (host_bridge == MPC10X_BRIDGE_106)
board_type = PCORE_TYPE_6750;
else /* MPC10X_BRIDGE_107 */
board_type = PCORE_TYPE_680;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pcibios_fixup = pcore_pcibios_fixup;
ppc_md.pci_swizzle = common_swizzle;
if (board_type == PCORE_TYPE_6750)
ppc_md.pci_map_irq = pcore_6750_map_irq;
else /* PCORE_TYPE_680 */
ppc_md.pci_map_irq = pcore_680_map_irq;
return board_type;
}
/* Dummy variable to satisfy mpc10x_common.o */
void *OpenPIC_Addr;
......@@ -130,7 +232,14 @@ pcore_setup_arch(void)
conswitchp = &dummy_con;
#endif
printk("Force PCore port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
printk(KERN_INFO "Force PowerCore ");
if (board_type == PCORE_TYPE_6750)
printk("6750\n");
else
printk("680\n");
printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
_set_L2CR(L2CR_L2E | _get_L2CR());
}
static void
......@@ -175,25 +284,16 @@ pcore_init_IRQ(void)
static __inline__ void
pcore_set_bat(void)
{
unsigned long bat3u, bat3l;
__asm__ __volatile__(
" lis %0,0xf000\n \
ori %1,%0,0x002a\n \
ori %0,%0,0x1ffe\n \
mtspr 0x21e,%0\n \
mtspr 0x21f,%1\n \
isync\n \
sync "
: "=r" (bat3u), "=r" (bat3l));
mb();
mtspr(DBAT3U, 0xf0001ffe);
mtspr(DBAT3L, 0xfe80002a);
mb();
}
static unsigned long __init
pcore_find_end_of_memory(void)
{
/* Cover I/O space with a BAT */
/* yuck, better hope your ram size is a power of 2 -- paulus */
pcore_set_bat();
return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
}
......@@ -212,6 +312,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
{
parse_bootinfo(find_bootinfo());
/* Cover I/O space with a BAT */
/* yuck, better hope your ram size is a power of 2 -- paulus */
pcore_set_bat();
isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
......@@ -241,4 +345,11 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.nvram_read_val = todc_m48txx_read_val;
ppc_md.nvram_write_val = todc_m48txx_write_val;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
#ifdef CONFIG_KGDB
ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
#endif
}
arch/ppc/platforms/pcore_pci.c deleted 100644 → 0
View file @ 4a952349
/*
* arch/ppc/platforms/pcore_pci.c
*
* PCI support for Force PCORE boards
*
* Author: Matt Porter <mporter@mvista.com>
*
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc10x.h>
#include "pcore.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif /* DEBUG */
static inline int __init
pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{9, 10, 11, 12}, /* IDSEL 24 - DEC 21554 */
{10, 0, 0, 0}, /* IDSEL 25 - DEC 21143 */
{11, 12, 9, 10}, /* IDSEL 26 - PMC I */
{12, 9, 10, 11}, /* IDSEL 27 - PMC II */
{0, 0, 0, 0}, /* IDSEL 28 - unused */
{0, 0, 9, 0}, /* IDSEL 29 - unused */
{0, 0, 0, 0}, /* IDSEL 30 - Winbond */
};
const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
static inline int __init
pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{9, 10, 11, 12}, /* IDSEL 24 - Sentinel */
{10, 0, 0, 0}, /* IDSEL 25 - i82559 #1 */
{11, 12, 9, 10}, /* IDSEL 26 - PMC I */
{12, 9, 10, 11}, /* IDSEL 27 - PMC II */
{9, 0, 0, 0}, /* IDSEL 28 - i82559 #2 */
{0, 0, 0, 0}, /* IDSEL 29 - unused */
{0, 0, 0, 0}, /* IDSEL 30 - Winbond */
};
const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
void __init
pcore_pcibios_fixup(void)
{
struct pci_dev *dev;
if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
PCI_DEVICE_ID_WINBOND_83C553,
0)))
{
/* Reroute interrupts both IDE channels to 15 */
pci_write_config_byte(dev,
PCORE_WINBOND_IDE_INT,
0xff);
/* Route INTA-D to IRQ9-12, respectively */
pci_write_config_word(dev,
PCORE_WINBOND_PCI_INT,
0x9abc);
/*
* Set up 8259 edge/level triggering
*/
outb(0x00, PCORE_WINBOND_PRI_EDG_LVL);
outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL);
}
}
int __init
pcore_find_bridges(void)
{
struct pci_controller* hose;
int host_bridge, board_type;
hose = pcibios_alloc_controller();
if (!hose)
return 0;
mpc10x_bridge_init(hose,
MPC10X_MEM_MAP_B,
MPC10X_MEM_MAP_B,
MPC10X_MAPB_EUMB_BASE);
/* Determine board type */
early_read_config_dword(hose,
0,
PCI_DEVFN(0,0),
PCI_VENDOR_ID,
&host_bridge);
if (host_bridge == MPC10X_BRIDGE_106)
board_type = PCORE_TYPE_6750;
else /* MPC10X_BRIDGE_107 */
board_type = PCORE_TYPE_680;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pcibios_fixup = pcore_pcibios_fixup;
ppc_md.pci_swizzle = common_swizzle;
if (board_type == PCORE_TYPE_6750)
ppc_md.pci_map_irq = pcore_6750_map_irq;
else /* PCORE_TYPE_680 */
ppc_md.pci_map_irq = pcore_680_map_irq;
return board_type;
}
arch/ppc/platforms/pplus.c
View file @ 12b00b39
......@@ -513,7 +513,7 @@ void __init pplus_find_bridges(void)
hose->mem_space.start = PPLUS_PCI_MEM_START;
hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
if (pplus_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
......@@ -816,7 +816,7 @@ static unsigned long __init pplus_find_end_of_memory(void)
dump_dbats();
#endif
total = pplus_get_mem_size(PPLUS_HAWK_SMC_BASE);
total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
return (total);
}
......
arch/ppc/platforms/pplus.h
View file @ 12b00b39
......@@ -64,14 +64,4 @@
#define PPLUS_VGA_MEM_BASE 0xf0000000U
extern int pplus_init(struct pci_controller *hose,
unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
unsigned long processor_pci_mem_end,
unsigned long processor_pci_io_start,
unsigned long processor_pci_io_end,
unsigned long processor_mpic_base);
extern unsigned long pplus_get_mem_size(unsigned int smc_base);
extern int pplus_mpic_init(unsigned int pci_mem_offset);
#endif /* __PPC_PPLUS_H */
#endif /* __PPC_PPLUS_H */
arch/ppc/platforms/prep_pci.c
View file @ 12b00b39
......@@ -311,11 +311,11 @@ static char Genesis2_pci_IRQ_map[23] __prepdata =
0, /* Slot 7 - unused */
0, /* Slot 8 - unused */
0, /* Slot 9 - unused */
0, /* Slot 10 - Ethernet */
0, /* Slot 11 - Universe PCI - VME Bridge */
3, /* Slot 12 - unused */
0, /* Slot 13 - unused */
2, /* Slot 14 - SCSI */
0, /* Slot 10 - unused */
0, /* Slot 11 - IDE */
3, /* Slot 12 - SCSI */
5, /* Slot 13 - Universe PCI - VME Bridge */
2, /* Slot 14 - Ethernet */
0, /* Slot 15 - unused */
9, /* Slot 16 - PMC 1 */
12, /* Slot 17 - pci */
......
arch/ppc/platforms/prep_setup.c
View file @ 12b00b39
......@@ -323,7 +323,7 @@ prep_carolina_cpuinfo(struct seq_file *m)
/* L2 size */
if ((l2_reg & 0x60) == 0)
seq_printf(m, "256KiB");
else if ((l2_reg & 0x60) == 1)
else if ((l2_reg & 0x60) == 0x20)
seq_printf(m, "512KiB");
else
seq_printf(m, "unknown size");
......@@ -725,6 +725,7 @@ prep_setup_arch(void)
case PREP_IBM_CAROLINA_IDE_0:
case PREP_IBM_CAROLINA_IDE_1:
case PREP_IBM_CAROLINA_IDE_2:
case PREP_IBM_CAROLINA_IDE_3:
is_ide = 1;
case PREP_IBM_CAROLINA_SCSI_0:
case PREP_IBM_CAROLINA_SCSI_1:
......
arch/ppc/syslib/Makefile
View file @ 12b00b39
......@@ -42,28 +42,24 @@ obj-$(CONFIG_EV64260) += gt64260_common.o gt64260_pic.o \
obj-$(CONFIG_GEMINI) += open_pic.o i8259.o indirect_pci.o
obj-$(CONFIG_K2) += i8259.o indirect_pci.o todc_time.o \
pci_auto.o
obj-$(CONFIG_LOPEC) += mpc10x_common.o indirect_pci.o pci_auto.o \
open_pic.o i8259.o todc_time.o
obj-$(CONFIG_LOPEC) += pci_auto.o open_pic.o i8259.o todc_time.o
obj-$(CONFIG_MCPN765) += todc_time.o indirect_pci.o pci_auto.o \
open_pic.o i8259.o pplus_common.o
open_pic.o i8259.o hawk_common.o
obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \
pci_auto.o indirect_pci.o
obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \
i8259.o pci_auto.o pplus_common.o
i8259.o pci_auto.o hawk_common.o
obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_PAL4) += cpc700_pic.o
obj-$(CONFIG_PCORE) += mpc10x_common.o todc_time.o i8259.o \
indirect_pci.o pci_auto.o
obj-$(CONFIG_POWERPMC250) += open_pic.o mpc10x_common.o \
indirect_pci.o pci_auto.o
obj-$(CONFIG_PPLUS) += pplus_common.o open_pic.o i8259.o \
obj-$(CONFIG_PCORE) += todc_time.o i8259.o pci_auto.o
obj-$(CONFIG_POWERPMC250) += open_pic.o pci_auto.o
obj-$(CONFIG_PPLUS) += hawk_common.o open_pic.o i8259.o \
indirect_pci.o todc_time.o pci_auto.o
obj-$(CONFIG_PRPMC750) += open_pic.o indirect_pci.o pci_auto.o \
pplus_common.o
hawk_common.o
obj-$(CONFIG_PRPMC800) += open_pic.o indirect_pci.o pci_auto.o \
pplus_common.o harrier.o
obj-$(CONFIG_SANDPOINT) += i8259.o open_pic.o mpc10x_common.o \
pci_auto.o indirect_pci.o todc_time.o
hawk_common.o harrier.o
obj-$(CONFIG_SANDPOINT) += i8259.o open_pic.o pci_auto.o todc_time.o
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_8260) += m8260_setup.o ppc8260_pic.o
......@@ -72,3 +68,4 @@ obj-$(CONFIG_KGDB) += gen550_kgdb.o gen550_dbg.o
obj-$(CONFIG_SERIAL_TEXT_DEBUG) += gen550_dbg.o
endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o
arch/ppc/syslib/pplus_common.c → arch/ppc/syslib/hawk_common.c
View file @ 12b00b39
/*
* arch/ppc/syslib/pplus_common.c
* arch/ppc/syslib/hawk_common.c
*
* Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
*
......@@ -44,7 +44,7 @@
* 'OpenPIC_Addr' will be set correctly by this routine.
*/
int __init
pplus_init(struct pci_controller *hose,
hawk_init(struct pci_controller *hose,
uint ppc_reg_base,
ulong processor_pci_mem_start,
ulong processor_pci_mem_end,
......@@ -59,14 +59,14 @@ pplus_init(struct pci_controller *hose,
*/
if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
printk("pplus_init: %s\n",
printk("hawk_init: %s\n",
"PPC to PCI mappings must start on 64 KB boundaries");
return -1;
}
if (((processor_pci_mem_end &0x0000ffff) != 0x0000ffff) ||
((processor_pci_io_end &0x0000ffff) != 0x0000ffff)) {
printk("pplus_init: PPC to PCI mappings %s\n",
printk("hawk_init: PPC to PCI mappings %s\n",
"must end just before a 64 KB boundaries");
return -1;
}
......@@ -75,19 +75,19 @@ pplus_init(struct pci_controller *hose,
(hose->mem_space.end - hose->mem_space.start)) ||
((processor_pci_io_end - processor_pci_io_start) !=
(hose->io_space.end - hose->io_space.start))) {
printk("pplus_init: %s\n",
printk("hawk_init: %s\n",
"PPC and PCI memory or I/O space sizes don't match");
return -1;
}
if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
printk("pplus_init: %s\n",
printk("hawk_init: %s\n",
"MPIC address must start on 256 MB boundary");
return -1;
}
if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
printk("pplus_init: %s\n",
printk("hawk_init: %s\n",
"pci_dram_offset must be multiple of 64 KB");
return -1;
}
......@@ -226,7 +226,7 @@ static uint hawk_size_table[] __initdata = {
* into virtual memory--too early to use ioremap().
*/
unsigned long __init
pplus_get_mem_size(uint smc_base)
hawk_get_mem_size(uint smc_base)
{
unsigned long total;
int i, size_table_entries, reg_limit;
......@@ -238,7 +238,7 @@ pplus_get_mem_size(uint smc_base)
vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
printk("pplus_get_mem_size: %s (0x%x)\n",
printk("hawk_get_mem_size: %s (0x%x)\n",
"Not a Motorola Memory Controller", vend_dev_id);
return 0;
}
......@@ -259,7 +259,7 @@ pplus_get_mem_size(uint smc_base)
reg_limit = HAWK_SMC_REG_COUNT;
}
else {
printk("pplus_get_mem_size: %s (0x%x)\n",
printk("hawk_get_mem_size: %s (0x%x)\n",
"Not a Falcon or HAWK", vend_dev_id);
return 0;
}
......@@ -285,35 +285,3 @@ pplus_get_mem_size(uint smc_base)
return total;
}
int __init
pplus_mpic_init(unsigned int pci_mem_offset)
{
unsigned short devid;
unsigned int pci_membase;
/* Check the first PCI device to see if it is a Raven or Hawk. */
early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
switch (devid) {
case PCI_DEVICE_ID_MOTOROLA_RAVEN:
case PCI_DEVICE_ID_MOTOROLA_HAWK:
break;
default:
OpenPIC_Addr = NULL;
return 1;
}
/* Read the memory base register. */
early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
if (pci_membase == 0) {
OpenPIC_Addr = NULL;
return 1;
}
/* Map the MPIC registers to virtual memory. */
OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
return 0;
}
crypto/des.c
View file @ 12b00b39
......@@ -1269,6 +1269,8 @@ static struct crypto_alg des3_ede_alg = {
.cia_decrypt = des3_ede_decrypt } }
};
MODULE_ALIAS("des3_ede");
static int __init init(void)
{
int ret = 0;
......
crypto/sha512.c
View file @ 12b00b39
......@@ -348,6 +348,8 @@ static struct crypto_alg sha384 = {
}
};
MODULE_ALIAS("sha384");
static int __init init(void)
{
int ret = 0;
......
drivers/block/ll_rw_blk.c
View file @ 12b00b39
......@@ -1821,13 +1821,14 @@ EXPORT_SYMBOL(blk_rq_map_user);
* Description:
* Unmap a request previously mapped by blk_rq_map_user().
*/
int blk_rq_unmap_user(struct request *rq, void __user *ubuf, unsigned int ulen)
int blk_rq_unmap_user(struct request *rq, void __user *ubuf, struct bio *bio,
unsigned int ulen)
{
const int read = rq_data_dir(rq) == READ;
int ret = 0;
if (rq->biotail)
bio_unmap_user(rq->biotail, read);
if (bio)
bio_unmap_user(bio, read);
if (rq->buffer) {
if (read && copy_to_user(ubuf, rq->buffer, ulen))
ret = -EFAULT;
......
drivers/block/scsi_ioctl.c
View file @ 12b00b39
......@@ -111,6 +111,7 @@ static int sg_io(request_queue_t *q, struct gendisk *bd_disk,
unsigned long start_time;
int reading, writing;
struct request *rq;
struct bio *bio;
char sense[SCSI_SENSE_BUFFERSIZE];
if (hdr->interface_id != 'S')
......@@ -164,6 +165,7 @@ static int sg_io(request_queue_t *q, struct gendisk *bd_disk,
rq->sense_len = 0;
rq->flags |= REQ_BLOCK_PC;
bio = rq->bio;
rq->timeout = (hdr->timeout * HZ) / 1000;
if (!rq->timeout)
......@@ -199,7 +201,7 @@ static int sg_io(request_queue_t *q, struct gendisk *bd_disk,
hdr->sb_len_wr = len;
}
if (blk_rq_unmap_user(rq, hdr->dxferp, hdr->dxfer_len))
if (blk_rq_unmap_user(rq, hdr->dxferp, bio, hdr->dxfer_len))
return -EFAULT;
/* may not have succeeded, but output values written to control
......
drivers/cdrom/cdrom.c
View file @ 12b00b39
......@@ -1946,6 +1946,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
{
request_queue_t *q = cdi->disk->queue;
struct request *rq;
struct bio *bio;
unsigned int len;
int nr, ret = 0;
......@@ -1980,6 +1981,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
rq->cmd_len = 12;
rq->flags |= REQ_BLOCK_PC;
rq->timeout = 60 * HZ;
bio = rq->bio;
if (blk_execute_rq(q, cdi->disk, rq)) {
struct request_sense *s = rq->sense;
......@@ -1987,7 +1989,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
cdi->last_sense = s->sense_key;
}
if (blk_rq_unmap_user(rq, ubuf, len))
if (blk_rq_unmap_user(rq, ubuf, bio, len))
ret = -EFAULT;
if (ret)
......
drivers/media/dvb/frontends/alps_tdlb7.c
View file @ 12b00b39
......@@ -36,6 +36,7 @@
#include <linux/fs.h>
#include <linux/unistd.h>
#include <linux/delay.h>
#include <linux/syscalls.h>
#include "dvb_frontend.h"
#include "dvb_functions.h"
......
drivers/media/dvb/frontends/sp887x.c
View file @ 12b00b39
......@@ -24,7 +24,7 @@
#include <linux/fcntl.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/syscalls.h>
#include "dvb_frontend.h"
#include "dvb_functions.h"
......
drivers/media/dvb/frontends/tda1004x.c
View file @ 12b00b39
......@@ -43,6 +43,8 @@
#include <linux/unistd.h>
#include <linux/fcntl.h>
#include <linux/errno.h>
#include <linux/syscalls.h>
#include "dvb_frontend.h"
#include "dvb_functions.h"
......
drivers/net/tg3.c
View file @ 12b00b39
......@@ -56,8 +56,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "3.2"
#define DRV_MODULE_RELDATE "April 26, 2004"
#define DRV_MODULE_VERSION "3.3"
#define DRV_MODULE_RELDATE "April 27, 2004"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
......@@ -7038,7 +7038,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
/* Note: 5705 also needs this flag set to improve bit error rate. */
/* Note: 5750 also needs this flag set to improve bit error rate. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
......
fs/jfs/jfs_unicode.c
View file @ 12b00b39
......@@ -78,7 +78,7 @@ int jfs_strfromUCS_le(char *to, const wchar_t * from, /* LITTLE ENDIAN */
* FUNCTION: Convert character string to unicode string
*
*/
static int jfs_strtoUCS(wchar_t * to, const char *from, int len,
static int jfs_strtoUCS(wchar_t * to, const unsigned char *from, int len,
struct nls_table *codepage)
{
int charlen;
......@@ -92,8 +92,7 @@ static int jfs_strtoUCS(wchar_t * to, const char *from, int len,
jfs_err("jfs_strtoUCS: char2uni returned %d.",
charlen);
jfs_err("charset = %s, char = 0x%x",
codepage->charset,
(unsigned char) *from);
codepage->charset, *from);
return charlen;
}
}
......
include/asm-generic/cpumask_arith.h
View file @ 12b00b39
......@@ -43,7 +43,7 @@
#define cpus_promote(map) ({ map; })
#define cpumask_of_cpu(cpu) ({ ((cpumask_t)1) << (cpu); })
#define first_cpu(map) __ffs(map)
#define first_cpu(map) find_first_bit(&(map), NR_CPUS)
#define next_cpu(cpu, map) find_next_bit(&(map), NR_CPUS, cpu + 1)
#endif /* __ASM_GENERIC_CPUMASK_ARITH_H */
include/asm-ppc/cputable.h
View file @ 12b00b39
......@@ -75,6 +75,7 @@ extern struct cpu_spec *cur_cpu_spec[];
#define CPU_FTR_DUAL_PLL_750FX 0x00004000
#define CPU_FTR_NO_DPM 0x00008000
#define CPU_FTR_HAS_HIGH_BATS 0x00010000
#define CPU_FTR_NEED_COHERENT 0x00020000
#ifdef __ASSEMBLY__
......
include/asm-ppc/hawk.h
View file @ 12b00b39
......@@ -29,4 +29,4 @@ extern int hawk_init(struct pci_controller *hose,
extern unsigned long hawk_get_mem_size(unsigned int smc_base);
extern int hawk_mpic_init(unsigned int pci_mem_offset);
#endif /* __ASMPPC_PPLUS_H */
#endif /* __ASMPPC_HAWK_H */
include/asm-ppc/highmem.h
View file @ 12b00b39
......@@ -87,7 +87,7 @@ static inline void *kmap_atomic(struct page *page, enum km_type type)
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
#if HIGHMEM_DEBUG
#ifdef HIGHMEM_DEBUG
BUG_ON(!pte_none(*(kmap_pte+idx)));
#endif
set_pte(kmap_pte+idx, mk_pte(page, kmap_prot));
......@@ -98,7 +98,7 @@ static inline void *kmap_atomic(struct page *page, enum km_type type)
static inline void kunmap_atomic(void *kvaddr, enum km_type type)
{
#if HIGHMEM_DEBUG
#ifdef HIGHMEM_DEBUG
unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
......
include/asm-ppc/rwsem.h
View file @ 12b00b39
......@@ -27,7 +27,7 @@ struct rw_semaphore {
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
spinlock_t wait_lock;
struct list_head wait_list;
#if RWSEM_DEBUG
#ifdef RWSEM_DEBUG
int debug;
#endif
};
......@@ -35,7 +35,7 @@ struct rw_semaphore {
/*
* initialisation
*/
#if RWSEM_DEBUG
#ifdef RWSEM_DEBUG
#define __RWSEM_DEBUG_INIT , 0
#else
#define __RWSEM_DEBUG_INIT /* */
......@@ -59,7 +59,7 @@ static inline void init_rwsem(struct rw_semaphore *sem)
sem->count = RWSEM_UNLOCKED_VALUE;
spin_lock_init(&sem->wait_lock);
INIT_LIST_HEAD(&sem->wait_list);
#if RWSEM_DEBUG
#ifdef RWSEM_DEBUG
sem->debug = 0;
#endif
}
......
include/linux/blkdev.h
View file @ 12b00b39
......@@ -522,7 +522,7 @@ extern void __blk_stop_queue(request_queue_t *q);
extern void blk_run_queue(request_queue_t *);
extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *);
extern struct request *blk_rq_map_user(request_queue_t *, int, void __user *, unsigned int);
extern int blk_rq_unmap_user(struct request *, void __user *, unsigned int);
extern int blk_rq_unmap_user(struct request *, void __user *, struct bio *, unsigned int);
extern int blk_execute_rq(request_queue_t *, struct gendisk *, struct request *);
static inline request_queue_t *bdev_get_queue(struct block_device *bdev)
......
include/linux/compat_ioctl.h
View file @ 12b00b39
......@@ -73,6 +73,7 @@ COMPATIBLE_IOCTL(HDIO_SET_NOWERR)
COMPATIBLE_IOCTL(HDIO_SET_32BIT)
COMPATIBLE_IOCTL(HDIO_SET_MULTCOUNT)
COMPATIBLE_IOCTL(HDIO_DRIVE_CMD)
COMPATIBLE_IOCTL(HDIO_DRIVE_TASK)
COMPATIBLE_IOCTL(HDIO_SET_PIO_MODE)
COMPATIBLE_IOCTL(HDIO_SET_NICE)
/* 0x02 -- Floppy ioctls */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7