arm64: zynqmp: Use ethernet-phy as node name for ethernet phys

Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts

@@ -73,7 +73,7 @@ &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts

@@ -84,7 +84,7 @@ &gem2 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@5 {
+	phy0: ethernet-phy@5 {
 		reg = <5>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts

@@ -73,7 +73,7 @@ &gem0 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 { /* VSC8211 */
+	phy0: ethernet-phy@0 { /* VSC8211 */
 		reg = <0>;
 	};
 };

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts

@@ -74,7 +74,7 @@ &gem1 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -105,7 +105,7 @@ &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@21 {
+	phy0: ethernet-phy@21 {
 		reg = <21>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts

@@ -16,7 +16,7 @@ / {
 
 &gem3 {
 	phy-handle = <&phyc>;
-	phyc: phy@c {
+	phyc: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -24,7 +24,7 @@ phyc: phy@c {
 		ti,dp83867-rxctrl-strap-quirk;
 	};
 	/* Cleanup from RevA */
-	/delete-node/ phy@21;
+	/delete-node/ ethernet-phy@21;
 };
 
 /* Fix collision with u61 */

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts

@@ -50,7 +50,7 @@ &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

@@ -106,7 +106,7 @@ &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

@@ -101,7 +101,7 @@ &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;