arm64: zynqmp: Enable can1 for ep108

This patch enables can1 for ep108.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi

@@ -47,6 +47,10 @@ &can0 {
 	clocks = <&misc_clk &misc_clk>;
 };
 
+&can1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
 &fpd_dma_chan1 {
 	clocks = <&clk600>, <&clk100>;
 };

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts

@@ -37,6 +37,10 @@ &can0 {
 	status = "okay";
 };
 
+&can1 {
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-handle = <&phy0>;