Commit 148cbb53 authored by Boris BREZILLON's avatar Boris BREZILLON Committed by David S. Miller

net/cadence/macb: add support for dt phy definition

The macb driver only handle PHY description through platform_data
(macb_platform_data).
Thus, when using dt you cannot define phy properties like phy address or
phy irq pin.

This patch makes use of the of_mdiobus_register to add support for
phy device definition using dt.
A fallback to the autoscan procedure is added in case there is no phy
devices defined in dt.
Signed-off-by: default avatarBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b4de77ad
......@@ -27,6 +27,7 @@
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/pinctrl/consumer.h>
......@@ -314,6 +315,7 @@ static int macb_mii_probe(struct net_device *dev)
int macb_mii_init(struct macb *bp)
{
struct macb_platform_data *pdata;
struct device_node *np;
int err = -ENXIO, i;
/* Enable management port */
......@@ -335,21 +337,46 @@ int macb_mii_init(struct macb *bp)
bp->mii_bus->parent = &bp->dev->dev;
pdata = bp->pdev->dev.platform_data;
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
bp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
if (!bp->mii_bus->irq) {
err = -ENOMEM;
goto err_out_free_mdiobus;
}
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
np = bp->pdev->dev.of_node;
if (np) {
/* try dt phy registration */
err = of_mdiobus_register(bp->mii_bus, np);
/* fallback to standard phy registration if no phy were
found during dt phy registration */
if (!err && !phy_find_first(bp->mii_bus)) {
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
phydev = mdiobus_scan(bp->mii_bus, i);
if (IS_ERR(phydev)) {
err = PTR_ERR(phydev);
break;
}
}
if (err)
goto err_out_unregister_bus;
}
} else {
for (i = 0; i < PHY_MAX_ADDR; i++)
bp->mii_bus->irq[i] = PHY_POLL;
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
if (mdiobus_register(bp->mii_bus))
err = mdiobus_register(bp->mii_bus);
}
if (err)
goto err_out_free_mdio_irq;
if (macb_mii_probe(bp->dev) != 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment