Commit 158a9624 authored by Linus Torvalds's avatar Linus Torvalds

Unify /proc/slabinfo configuration

Both SLUB and SLAB really did almost exactly the same thing for
/proc/slabinfo setup, using duplicate code and per-allocator #ifdef's.

This just creates a common CONFIG_SLABINFO that is enabled by both SLUB
and SLAB, and shares all the setup code.  Maybe SLOB will want this some
day too.
Reviewed-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6b6adc22
...@@ -410,7 +410,7 @@ static const struct file_operations proc_modules_operations = { ...@@ -410,7 +410,7 @@ static const struct file_operations proc_modules_operations = {
}; };
#endif #endif
#ifdef CONFIG_SLAB #ifdef CONFIG_SLABINFO
static int slabinfo_open(struct inode *inode, struct file *file) static int slabinfo_open(struct inode *inode, struct file *file)
{ {
return seq_open(file, &slabinfo_op); return seq_open(file, &slabinfo_op);
...@@ -451,20 +451,6 @@ static const struct file_operations proc_slabstats_operations = { ...@@ -451,20 +451,6 @@ static const struct file_operations proc_slabstats_operations = {
#endif #endif
#endif #endif
#ifdef CONFIG_SLUB
static int slabinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &slabinfo_op);
}
static const struct file_operations proc_slabinfo_operations = {
.open = slabinfo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
#endif
static int show_stat(struct seq_file *p, void *v) static int show_stat(struct seq_file *p, void *v)
{ {
int i; int i;
...@@ -742,14 +728,11 @@ void __init proc_misc_init(void) ...@@ -742,14 +728,11 @@ void __init proc_misc_init(void)
#endif #endif
create_seq_entry("stat", 0, &proc_stat_operations); create_seq_entry("stat", 0, &proc_stat_operations);
create_seq_entry("interrupts", 0, &proc_interrupts_operations); create_seq_entry("interrupts", 0, &proc_interrupts_operations);
#ifdef CONFIG_SLAB #ifdef CONFIG_SLABINFO
create_seq_entry("slabinfo",S_IWUSR|S_IRUGO,&proc_slabinfo_operations); create_seq_entry("slabinfo",S_IWUSR|S_IRUGO,&proc_slabinfo_operations);
#ifdef CONFIG_DEBUG_SLAB_LEAK #ifdef CONFIG_DEBUG_SLAB_LEAK
create_seq_entry("slab_allocators", 0 ,&proc_slabstats_operations); create_seq_entry("slab_allocators", 0 ,&proc_slabstats_operations);
#endif #endif
#endif
#ifdef CONFIG_SLUB
create_seq_entry("slabinfo", S_IWUSR|S_IRUGO, &proc_slabinfo_operations);
#endif #endif
create_seq_entry("buddyinfo",S_IRUGO, &fragmentation_file_operations); create_seq_entry("buddyinfo",S_IRUGO, &fragmentation_file_operations);
create_seq_entry("pagetypeinfo", S_IRUGO, &pagetypeinfo_file_ops); create_seq_entry("pagetypeinfo", S_IRUGO, &pagetypeinfo_file_ops);
......
...@@ -271,5 +271,10 @@ static inline void *kzalloc(size_t size, gfp_t flags) ...@@ -271,5 +271,10 @@ static inline void *kzalloc(size_t size, gfp_t flags)
return kmalloc(size, flags | __GFP_ZERO); return kmalloc(size, flags | __GFP_ZERO);
} }
#ifdef CONFIG_SLABINFO
extern const struct seq_operations slabinfo_op;
ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
#endif
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#endif /* _LINUX_SLAB_H */ #endif /* _LINUX_SLAB_H */
...@@ -95,7 +95,4 @@ static inline void *kmalloc_node(size_t size, gfp_t flags, int node) ...@@ -95,7 +95,4 @@ static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
#endif /* CONFIG_NUMA */ #endif /* CONFIG_NUMA */
extern const struct seq_operations slabinfo_op;
ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
#endif /* _LINUX_SLAB_DEF_H */ #endif /* _LINUX_SLAB_DEF_H */
...@@ -200,6 +200,4 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) ...@@ -200,6 +200,4 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
} }
#endif #endif
extern const struct seq_operations slabinfo_op;
#endif /* _LINUX_SLUB_DEF_H */ #endif /* _LINUX_SLUB_DEF_H */
...@@ -658,6 +658,12 @@ endchoice ...@@ -658,6 +658,12 @@ endchoice
endmenu # General setup endmenu # General setup
config SLABINFO
bool
depends on PROC_FS
depends on SLAB || SLUB
default y
config RT_MUTEXES config RT_MUTEXES
boolean boolean
select PLIST select PLIST
......
...@@ -4105,7 +4105,7 @@ static void cache_reap(struct work_struct *w) ...@@ -4105,7 +4105,7 @@ static void cache_reap(struct work_struct *w)
schedule_delayed_work(work, round_jiffies_relative(REAPTIMEOUT_CPUC)); schedule_delayed_work(work, round_jiffies_relative(REAPTIMEOUT_CPUC));
} }
#ifdef CONFIG_PROC_FS #ifdef CONFIG_SLABINFO
static void print_slabinfo_header(struct seq_file *m) static void print_slabinfo_header(struct seq_file *m)
{ {
......
...@@ -4127,7 +4127,14 @@ __initcall(slab_sysfs_init); ...@@ -4127,7 +4127,14 @@ __initcall(slab_sysfs_init);
/* /*
* The /proc/slabinfo ABI * The /proc/slabinfo ABI
*/ */
#ifdef CONFIG_PROC_FS #ifdef CONFIG_SLABINFO
ssize_t slabinfo_write(struct file *file, const char __user * buffer,
size_t count, loff_t *ppos)
{
return -EINVAL;
}
static void print_slabinfo_header(struct seq_file *m) static void print_slabinfo_header(struct seq_file *m)
{ {
...@@ -4201,4 +4208,4 @@ const struct seq_operations slabinfo_op = { ...@@ -4201,4 +4208,4 @@ const struct seq_operations slabinfo_op = {
.show = s_show, .show = s_show,
}; };
#endif /* CONFIG_PROC_FS */ #endif /* CONFIG_SLABINFO */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment