arm64: dts: msm8916: Add cpu cooling maps

Add cpu cooling maps for cpu passive trip points. The cpu cooling
device states are mapped to cpufreq based scaling frequencies.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8916";
@@ -115,6 +116,7 @@ CPU0: cpu@0 {
 			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU1: cpu@1 {
@@ -126,6 +128,7 @@ CPU1: cpu@1 {
 			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU2: cpu@2 {
@@ -137,6 +140,7 @@ CPU2: cpu@2 {
 			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU3: cpu@3 {
@@ -148,6 +152,7 @@ CPU3: cpu@3 {
 			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		L2_0: l2-cache {
@@ -196,6 +201,13 @@ cpu_crit0: trip1 {
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal1 {
@@ -216,6 +228,13 @@ cpu_crit1: trip1 {
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 	};