Commit 167f53d0 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller

sky2: use pci_config access functions

Use the PCI layer config access functions. The driver was using the
memory mapped window in device, to workaround issues accessing the
advanced error reporting registers.
Signed-off-by: default avatarStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 555382cb
...@@ -223,21 +223,22 @@ static void sky2_power_on(struct sky2_hw *hw) ...@@ -223,21 +223,22 @@ static void sky2_power_on(struct sky2_hw *hw)
sky2_write8(hw, B2_Y2_CLK_GATE, 0); sky2_write8(hw, B2_Y2_CLK_GATE, 0);
if (hw->flags & SKY2_HW_ADV_POWER_CTL) { if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
struct pci_dev *pdev = hw->pdev;
u32 reg; u32 reg;
sky2_pci_write32(hw, PCI_DEV_REG3, 0); pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
reg = sky2_pci_read32(hw, PCI_DEV_REG4); pci_read_config_dword(pdev, PCI_DEV_REG4, &reg);
/* set all bits to 0 except bits 15..12 and 8 */ /* set all bits to 0 except bits 15..12 and 8 */
reg &= P_ASPM_CONTROL_MSK; reg &= P_ASPM_CONTROL_MSK;
sky2_pci_write32(hw, PCI_DEV_REG4, reg); pci_write_config_dword(pdev, PCI_DEV_REG4, reg);
reg = sky2_pci_read32(hw, PCI_DEV_REG5); pci_read_config_dword(pdev, PCI_DEV_REG5, &reg);
/* set all bits to 0 except bits 28 & 27 */ /* set all bits to 0 except bits 28 & 27 */
reg &= P_CTL_TIM_VMAIN_AV_MSK; reg &= P_CTL_TIM_VMAIN_AV_MSK;
sky2_pci_write32(hw, PCI_DEV_REG5, reg); pci_write_config_dword(pdev, PCI_DEV_REG5, reg);
sky2_pci_write32(hw, PCI_CFG_REG_1, 0); pci_write_config_dword(pdev, PCI_CFG_REG_1, 0);
/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */ /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
reg = sky2_read32(hw, B2_GP_IO); reg = sky2_read32(hw, B2_GP_IO);
...@@ -603,6 +604,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ...@@ -603,6 +604,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
{ {
struct pci_dev *pdev = hw->pdev;
u32 reg1; u32 reg1;
static const u32 phy_power[] static const u32 phy_power[]
= { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
...@@ -611,15 +613,16 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) ...@@ -611,15 +613,16 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
onoff = !onoff; onoff = !onoff;
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
if (onoff) if (onoff)
/* Turn off phy power saving */ /* Turn off phy power saving */
reg1 &= ~phy_power[port]; reg1 &= ~phy_power[port];
else else
reg1 |= phy_power[port]; reg1 |= phy_power[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1); pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
sky2_pci_read32(hw, PCI_DEV_REG1); pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
udelay(100); udelay(100);
} }
...@@ -687,9 +690,9 @@ static void sky2_wol_init(struct sky2_port *sky2) ...@@ -687,9 +690,9 @@ static void sky2_wol_init(struct sky2_port *sky2)
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl); sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
/* Turn on legacy PCI-Express PME mode */ /* Turn on legacy PCI-Express PME mode */
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
reg1 |= PCI_Y2_PME_LEGACY; reg1 |= PCI_Y2_PME_LEGACY;
sky2_pci_write32(hw, PCI_DEV_REG1, reg1); pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
/* block receiver */ /* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
...@@ -1306,9 +1309,9 @@ static int sky2_up(struct net_device *dev) ...@@ -1306,9 +1309,9 @@ static int sky2_up(struct net_device *dev)
struct sky2_port *osky2 = netdev_priv(otherdev); struct sky2_port *osky2 = netdev_priv(otherdev);
u16 cmd; u16 cmd;
cmd = sky2_pci_read16(hw, cap + PCI_X_CMD); pci_read_config_word(hw->pdev, cap + PCI_X_CMD, &cmd);
cmd &= ~PCI_X_CMD_MAX_SPLIT; cmd &= ~PCI_X_CMD_MAX_SPLIT;
sky2_pci_write16(hw, cap + PCI_X_CMD, cmd); pci_write_config_word(hw->pdev, cap + PCI_X_CMD, cmd);
sky2->rx_csum = 0; sky2->rx_csum = 0;
osky2->rx_csum = 0; osky2->rx_csum = 0;
...@@ -2434,13 +2437,13 @@ static void sky2_hw_intr(struct sky2_hw *hw) ...@@ -2434,13 +2437,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err; u16 pci_err;
pci_err = sky2_pci_read16(hw, PCI_STATUS); pci_read_config_word(pdev, PCI_STATUS, &pci_err);
if (net_ratelimit()) if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
pci_err); pci_err);
sky2_pci_write16(hw, PCI_STATUS, pci_write_config_word(pdev, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS); pci_err | PCI_STATUS_ERROR_BITS);
} }
if (status & Y2_IS_PCI_EXP) { if (status & Y2_IS_PCI_EXP) {
...@@ -2694,10 +2697,13 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) ...@@ -2694,10 +2697,13 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
static int __devinit sky2_init(struct sky2_hw *hw) static int __devinit sky2_init(struct sky2_hw *hw)
{ {
int rc;
u8 t8; u8 t8;
/* Enable all clocks */ /* Enable all clocks and check for bad PCI access */
sky2_pci_write32(hw, PCI_DEV_REG3, 0); rc = pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0);
if (rc)
return rc;
sky2_write8(hw, B0_CTST, CS_RST_CLR); sky2_write8(hw, B0_CTST, CS_RST_CLR);
...@@ -2791,10 +2797,9 @@ static void sky2_reset(struct sky2_hw *hw) ...@@ -2791,10 +2797,9 @@ static void sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_CLR); sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */ /* clear PCI errors, if any */
status = sky2_pci_read16(hw, PCI_STATUS); pci_read_config_word(pdev, PCI_STATUS, &status);
status |= PCI_STATUS_ERROR_BITS;
sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS); pci_write_config_word(pdev, PCI_STATUS, status);
sky2_write8(hw, B0_CTST, CS_MRST_CLR); sky2_write8(hw, B0_CTST, CS_MRST_CLR);
...@@ -3606,26 +3611,31 @@ static int sky2_get_eeprom_len(struct net_device *dev) ...@@ -3606,26 +3611,31 @@ static int sky2_get_eeprom_len(struct net_device *dev)
struct sky2_port *sky2 = netdev_priv(dev); struct sky2_port *sky2 = netdev_priv(dev);
u16 reg2; u16 reg2;
reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2); pci_read_config_word(sky2->hw->pdev, PCI_DEV_REG2, &reg2);
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
} }
static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset) static u32 sky2_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
{ {
sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); u32 val;
while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F)) pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset);
cpu_relax();
return sky2_pci_read32(hw, cap + PCI_VPD_DATA); do {
pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
} while (!(offset & PCI_VPD_ADDR_F));
pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &val);
return val;
} }
static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val) static void sky2_vpd_write(struct pci_dev *pdev, int cap, u16 offset, u32 val)
{ {
sky2_pci_write32(hw, cap + PCI_VPD_DATA, val); pci_write_config_word(pdev, cap + PCI_VPD_DATA, val);
sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); pci_write_config_dword(pdev, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
do { do {
cpu_relax(); pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
} while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F); } while (offset & PCI_VPD_ADDR_F);
} }
static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
...@@ -3642,7 +3652,7 @@ static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom ...@@ -3642,7 +3652,7 @@ static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
eeprom->magic = SKY2_EEPROM_MAGIC; eeprom->magic = SKY2_EEPROM_MAGIC;
while (length > 0) { while (length > 0) {
u32 val = sky2_vpd_read(sky2->hw, cap, offset); u32 val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
int n = min_t(int, length, sizeof(val)); int n = min_t(int, length, sizeof(val));
memcpy(data, &val, n); memcpy(data, &val, n);
...@@ -3672,10 +3682,10 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom ...@@ -3672,10 +3682,10 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
int n = min_t(int, length, sizeof(val)); int n = min_t(int, length, sizeof(val));
if (n < sizeof(val)) if (n < sizeof(val))
val = sky2_vpd_read(sky2->hw, cap, offset); val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
memcpy(&val, data, n); memcpy(&val, data, n);
sky2_vpd_write(sky2->hw, cap, offset, val); sky2_vpd_write(sky2->hw->pdev, cap, offset, val);
length -= n; length -= n;
data += n; data += n;
...@@ -4116,15 +4126,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, ...@@ -4116,15 +4126,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
*/ */
{ {
u32 reg; u32 reg;
reg = sky2_pci_read32(hw, PCI_DEV_REG2); pci_read_config_dword(pdev,PCI_DEV_REG2, &reg);
reg &= ~PCI_REV_DESC; reg &= ~PCI_REV_DESC;
sky2_pci_write32(hw, PCI_DEV_REG2, reg); pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
} }
#endif #endif
/* ring for status responses */ /* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma);
&hw->st_dma);
if (!hw->st_le) if (!hw->st_le)
goto err_out_iounmap; goto err_out_iounmap;
...@@ -4201,7 +4210,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, ...@@ -4201,7 +4210,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
free_netdev(dev); free_netdev(dev);
err_out_free_pci: err_out_free_pci:
sky2_write8(hw, B0_CTST, CS_RST_SET); sky2_write8(hw, B0_CTST, CS_RST_SET);
pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
err_out_iounmap: err_out_iounmap:
iounmap(hw->regs); iounmap(hw->regs);
err_out_free_hw: err_out_free_hw:
...@@ -4312,7 +4321,7 @@ static int sky2_resume(struct pci_dev *pdev) ...@@ -4312,7 +4321,7 @@ static int sky2_resume(struct pci_dev *pdev)
if (hw->chip_id == CHIP_ID_YUKON_EX || if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_FE_P) hw->chip_id == CHIP_ID_YUKON_FE_P)
sky2_pci_write32(hw, PCI_DEV_REG3, 0); pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
sky2_reset(hw); sky2_reset(hw);
......
...@@ -2129,25 +2129,4 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, ...@@ -2129,25 +2129,4 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
} }
/* PCI config space access */
static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read32(hw, Y2_CFG_SPC + reg);
}
static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read16(hw, Y2_CFG_SPC + reg);
}
static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
{
sky2_write32(hw, Y2_CFG_SPC + reg, val);
}
static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
{
sky2_write16(hw, Y2_CFG_SPC + reg, val);
}
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment