Skip to content

L
linux
Commit 1703ecc7 authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

/spare/repo/netdev-2.6 branch 'uli-tulip'

parents bf4e70e5 945a7876
Hide whitespace changes
Inline Side-by-side
Showing with 1775 additions and 66 deletions
drivers/net/tulip/Kconfig
View file @ 1703ecc7
...@@ -135,6 +135,18 @@ config DM9102 ...@@ -135,6 +135,18 @@ config DM9102
<file:Documentation/networking/net-modules.txt>. The module will <file:Documentation/networking/net-modules.txt>. The module will
be called dmfe. be called dmfe.
config ULI526X
tristate "ULi M526x controller support"
depends on NET_TULIP && PCI
select CRC32
---help---
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
(<http://www.uli.com.tw/>).
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will
be called uli526x.
config PCMCIA_XIRCOM config PCMCIA_XIRCOM
tristate "Xircom CardBus support (new driver)" tristate "Xircom CardBus support (new driver)"
depends on NET_TULIP && CARDBUS depends on NET_TULIP && CARDBUS
......
drivers/net/tulip/Makefile
View file @ 1703ecc7
...@@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o ...@@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o
obj-$(CONFIG_DE2104X) += de2104x.o obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_TULIP) += tulip.o obj-$(CONFIG_TULIP) += tulip.o
obj-$(CONFIG_DE4X5) += de4x5.o obj-$(CONFIG_DE4X5) += de4x5.o
obj-$(CONFIG_ULI526X) += uli526x.o
# Declare multi-part drivers. # Declare multi-part drivers.
......
drivers/net/tulip/media.c
View file @ 1703ecc7
...@@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location) ...@@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
return retval & 0xffff; return retval & 0xffff;
} }
if(tp->chip_id == ULI526X && tp->revision >= 0x40) {
int value;
int i = 1000;
value = ioread32(ioaddr + CSR9);
iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
value = (phy_id << 21) | (location << 16) | 0x08000000;
iowrite32(value, ioaddr + CSR10);
while(--i > 0) {
mdio_delay();
if(ioread32(ioaddr + CSR10) & 0x10000000)
break;
}
retval = ioread32(ioaddr + CSR10);
spin_unlock_irqrestore(&tp->mii_lock, flags);
return retval & 0xFFFF;
}
/* Establish sync by sending at least 32 logic ones. */ /* Establish sync by sending at least 32 logic ones. */
for (i = 32; i >= 0; i--) { for (i = 32; i >= 0; i--) {
iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
...@@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) ...@@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
spin_unlock_irqrestore(&tp->mii_lock, flags); spin_unlock_irqrestore(&tp->mii_lock, flags);
return; return;
} }
if (tp->chip_id == ULI526X && tp->revision >= 0x40) {
int value;
int i = 1000;
value = ioread32(ioaddr + CSR9);
iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF);
iowrite32(value, ioaddr + CSR10);
while(--i > 0) {
if (ioread32(ioaddr + CSR10) & 0x10000000)
break;
}
spin_unlock_irqrestore(&tp->mii_lock, flags);
return;
}
/* Establish sync by sending 32 logic ones. */ /* Establish sync by sending 32 logic ones. */
for (i = 32; i >= 0; i--) { for (i = 32; i >= 0; i--) {
......
drivers/net/tulip/timer.c
View file @ 1703ecc7
...@@ -39,7 +39,6 @@ void tulip_timer(unsigned long data) ...@@ -39,7 +39,6 @@ void tulip_timer(unsigned long data)
case MX98713: case MX98713:
case COMPEX9881: case COMPEX9881:
case DM910X: case DM910X:
case ULI526X:
default: { default: {
struct medialeaf *mleaf; struct medialeaf *mleaf;
unsigned char *p; unsigned char *p;
......
drivers/net/tulip/tulip.h
View file @ 1703ecc7
...@@ -88,7 +88,6 @@ enum chips { ...@@ -88,7 +88,6 @@ enum chips {
I21145, I21145,
DM910X, DM910X,
CONEXANT, CONEXANT,
ULI526X
}; };
...@@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp) ...@@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
static inline void tulip_restart_rxtx(struct tulip_private *tp) static inline void tulip_restart_rxtx(struct tulip_private *tp)
{ {
if(!(tp->chip_id == ULI526X && tulip_stop_rxtx(tp);
(tp->revision == 0x40 || tp->revision == 0x50))) { udelay(5);
tulip_stop_rxtx(tp);
udelay(5);
}
tulip_start_rxtx(tp); tulip_start_rxtx(tp);
} }
......
drivers/net/tulip/tulip_core.c
View file @ 1703ecc7
...@@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = { ...@@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = {
{ "Conexant LANfinity", 256, 0x0001ebef, { "Conexant LANfinity", 256, 0x0001ebef,
HAS_MII | HAS_ACPI, tulip_timer }, HAS_MII | HAS_ACPI, tulip_timer },
/* ULi526X */
{ "ULi M5261/M5263", 128, 0x0001ebef,
HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
}; };
...@@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = { ...@@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = {
{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
{ 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
{ } /* terminate list */ { } /* terminate list */
...@@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev) ...@@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev)
dev->name); dev->name);
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
|| tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
|| tp->chip_id == DM910X || tp->chip_id == ULI526X) { || tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
...@@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev) ...@@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev)
entry = tp->cur_tx++ % TX_RING_SIZE; entry = tp->cur_tx++ % TX_RING_SIZE;
if (entry != 0) { if (entry != 0) {
/* Avoid a chip errata by prefixing a dummy entry. Don't do /* Avoid a chip errata by prefixing a dummy entry. */
this on the ULI526X as it triggers a different problem */ tp->tx_buffers[entry].skb = NULL;
if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].mapping = 0;
tp->tx_buffers[entry].skb = NULL; tp->tx_ring[entry].length =
tp->tx_buffers[entry].mapping = 0; (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
tp->tx_ring[entry].length = tp->tx_ring[entry].buffer1 = 0;
(entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; /* Must set DescOwned later to avoid race with chip */
tp->tx_ring[entry].buffer1 = 0; dummy = entry;
/* Must set DescOwned later to avoid race with chip */ entry = tp->cur_tx++ % TX_RING_SIZE;
dummy = entry;
entry = tp->cur_tx++ % TX_RING_SIZE;
}
} }
tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].skb = NULL;
...@@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev) ...@@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev)
{ {
if (pdev->vendor == 0x1282 && pdev->device == 0x9102) if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
return 1; return 1;
if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
return 1;
if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
return 1;
return 0; return 0;
} }
...@@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, ...@@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
switch (chip_idx) { switch (chip_idx) {
case DC21140: case DC21140:
case DM910X: case DM910X:
case ULI526X:
default: default:
if (tp->mtable) if (tp->mtable)
iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
......
drivers/net/tulip/uli526x.c 0 → 100644
View file @ 1703ecc7
/*
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
#define DRV_NAME "uli526x"
#define DRV_VERSION "0.9.3"
#define DRV_RELDATE "2005-7-29"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <asm/processor.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
/* Board/System/Debug information/definition ---------------- */
#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
#define ULI526X_IO_SIZE 0x100
#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
#define TX_BUF_ALLOC 0x600
#define RX_ALLOC_SIZE 0x620
#define ULI526X_RESET 1
#define CR0_DEFAULT 0
#define CR6_DEFAULT 0x22200000
#define CR7_DEFAULT 0x180c1
#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
#define MAX_PACKET_SIZE 1514
#define ULI5261_MAX_MULTICAST 14
#define RX_COPY_SIZE 100
#define MAX_CHECK_PACKET 0x8000
#define ULI526X_10MHF 0
#define ULI526X_100MHF 1
#define ULI526X_10MFD 4
#define ULI526X_100MFD 5
#define ULI526X_AUTO 8
#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
/* CR9 definition: SROM/MII */
#define CR9_SROM_READ 0x4800
#define CR9_SRCS 0x1
#define CR9_SRCLK 0x2
#define CR9_CRDOUT 0x8
#define SROM_DATA_0 0x0
#define SROM_DATA_1 0x4
#define PHY_DATA_1 0x20000
#define PHY_DATA_0 0x00000
#define MDCLKH 0x10000
#define PHY_POWER_DOWN 0x800
#define SROM_V41_CODE 0x14
#define SROM_CLK_WRITE(data, ioaddr) \
outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
udelay(5); \
outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
udelay(5); \
outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
udelay(5);
/* Structure/enum declaration ------------------------------- */
struct tx_desc {
u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
char *tx_buf_ptr; /* Data for us */
struct tx_desc *next_tx_desc;
} __attribute__(( aligned(32) ));
struct rx_desc {
u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
struct sk_buff *rx_skb_ptr; /* Data for us */
struct rx_desc *next_rx_desc;
} __attribute__(( aligned(32) ));
struct uli526x_board_info {
u32 chip_id; /* Chip vendor/Device ID */
struct net_device *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
long ioaddr; /* I/O base address */
u32 cr0_data;
u32 cr5_data;
u32 cr6_data;
u32 cr7_data;
u32 cr15_data;
/* pointer for memory physical address */
dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
dma_addr_t first_tx_desc_dma;
dma_addr_t first_rx_desc_dma;
/* descriptor pointer */
unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
unsigned char *buf_pool_start; /* Tx buffer pool align dword */
unsigned char *desc_pool_ptr; /* descriptor pool memory */
struct tx_desc *first_tx_desc;
struct tx_desc *tx_insert_ptr;
struct tx_desc *tx_remove_ptr;
struct rx_desc *first_rx_desc;
struct rx_desc *rx_insert_ptr;
struct rx_desc *rx_ready_ptr; /* packet come pointer */
unsigned long tx_packet_cnt; /* transmitted packet count */
unsigned long rx_avail_cnt; /* available rx descriptor count */
unsigned long interval_rx_cnt; /* rx packet count a callback time */
u16 dbug_cnt;
u16 NIC_capability; /* NIC media capability */
u16 PHY_reg4; /* Saved Phyxcer register 4 value */
u8 media_mode; /* user specify media mode */
u8 op_mode; /* real work media mode */
u8 phy_addr;
u8 link_failed; /* Ever link failed */
u8 wait_reset; /* Hardware failed, need to reset */
struct timer_list timer;
/* System defined statistic counter */
struct net_device_stats stats;
/* Driver defined statistic counter */
unsigned long tx_fifo_underrun;
unsigned long tx_loss_carrier;
unsigned long tx_no_carrier;
unsigned long tx_late_collision;
unsigned long tx_excessive_collision;
unsigned long tx_jabber_timeout;
unsigned long reset_count;
unsigned long reset_cr8;
unsigned long reset_fatal;
unsigned long reset_TXtimeout;
/* NIC SROM data */
unsigned char srom[128];
u8 init;
};
enum uli526x_offsets {
DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
DCR15 = 0x78
};
enum uli526x_CR6_bits {
CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
};
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static char version[] __devinitdata =
KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
DRV_VERSION " (" DRV_RELDATE ")\n";
static int uli526x_debug;
static unsigned char uli526x_media_mode = ULI526X_AUTO;
static u32 uli526x_cr6_user_set;
/* For module input parameter */
static int debug;
static u32 cr6set;
static unsigned char mode = 8;
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
static int uli526x_stop(struct net_device *);
static struct net_device_stats * uli526x_get_stats(struct net_device *);
static void uli526x_set_filter_mode(struct net_device *);
static struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *);
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
static void send_filter_frame(struct net_device *, int);
static u16 phy_read(unsigned long, u8, u8, u32);
static u16 phy_readby_cr10(unsigned long, u8, u8);
static void phy_write(unsigned long, u8, u8, u16, u32);
static void phy_writeby_cr10(unsigned long, u8, u8, u16);
static void phy_write_1bit(unsigned long, u32, u32);
static u16 phy_read_1bit(unsigned long, u32);
static u8 uli526x_sense_speed(struct uli526x_board_info *);
static void uli526x_process_mode(struct uli526x_board_info *);
static void uli526x_timer(unsigned long);
static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
static void uli526x_dynamic_reset(struct net_device *);
static void uli526x_free_rxbuffer(struct uli526x_board_info *);
static void uli526x_init(struct net_device *);
static void uli526x_set_phyxcer(struct uli526x_board_info *);
/* ULI526X network board routine ---------------------------- */
/*
* Search ULI526X board, allocate space and register it
*/
static int __devinit uli526x_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct uli526x_board_info *db; /* board information structure */
struct net_device *dev;
int i, err;
ULI526X_DBUG(0, "uli526x_init_one()", 0);
if (!printed_version++)
printk(version);
/* Init network device */
dev = alloc_etherdev(sizeof(*db));
if (dev == NULL)
return -ENOMEM;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
}
/* Enable Master/IO access, Disable memory access */
err = pci_enable_device(pdev);
if (err)
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_request_regions(pdev, DRV_NAME)) {
printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
/* Init system & device */
db = netdev_priv(dev);
/* Allocate Tx/Rx descriptor memory */
db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
if(db->desc_pool_ptr == NULL)
{
err = -ENOMEM;
goto err_out_nomem;
}
db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
if(db->buf_pool_ptr == NULL)
{
err = -ENOMEM;
goto err_out_nomem;
}
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
db->buf_pool_start = db->buf_pool_ptr;
db->buf_pool_dma_start = db->buf_pool_dma_ptr;
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
db->pdev = pdev;
db->init = 1;
dev->base_addr = db->ioaddr;
dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
/* Register some necessary functions */
dev->open = &uli526x_open;
dev->hard_start_xmit = &uli526x_start_xmit;
dev->stop = &uli526x_stop;
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
spin_lock_init(&db->lock);
/* read 64 word srom data */
for (i = 0; i < 64; i++)
((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
/* Set Node address */
if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */
{
outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode
outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port
outl(0, db->ioaddr + DCR14); //Clear reset port
outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer
outl(0, db->ioaddr + DCR14); //Clear reset port
outl(0, db->ioaddr + DCR13); //Clear CR13
outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port
//Read MAC address from CR14
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inl(db->ioaddr + DCR14);
//Read end
outl(0, db->ioaddr + DCR13); //Clear CR13
outl(0, db->ioaddr + DCR0); //Clear CR0
udelay(10);
}
else /*Exist SROM*/
{
for (i = 0; i < 6; i++)
dev->dev_addr[i] = db->srom[20 + i];
}
err = register_netdev (dev);
if (err)
goto err_out_res;
printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
for (i = 0; i < 6; i++)
printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
printk(", irq %d.\n", dev->irq);
pci_set_master(pdev);
return 0;
err_out_res:
pci_release_regions(pdev);
err_out_nomem:
if(db->desc_pool_ptr)
pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
db->desc_pool_ptr, db->desc_pool_dma_ptr);
if(db->buf_pool_ptr != NULL)
pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
err_out_disable:
pci_disable_device(pdev);
err_out_free:
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
return err;
}
static void __devexit uli526x_remove_one (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_remove_one()", 0);
pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
db->desc_pool_dma_ptr);
pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
unregister_netdev(dev);
pci_release_regions(pdev);
free_netdev(dev); /* free board information */
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
}
/*
* Open the interface.
* The interface is opened whenever "ifconfig" activates it.
*/
static int uli526x_open(struct net_device *dev)
{
int ret;
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_open", 0);
ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
if (ret)
return ret;
/* system variable init */
db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
db->tx_packet_cnt = 0;
db->rx_avail_cnt = 0;
db->link_failed = 1;
netif_carrier_off(dev);
db->wait_reset = 0;
db->NIC_capability = 0xf; /* All capability*/
db->PHY_reg4 = 0x1e0;
/* CR6 operation mode decision */
db->cr6_data |= ULI526X_TXTH_256;
db->cr0_data = CR0_DEFAULT;
/* Initialize ULI526X board */
uli526x_init(dev);
/* Active System Interface */
netif_wake_queue(dev);
/* set and active a timer process */
init_timer(&db->timer);
db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
db->timer.data = (unsigned long)dev;
db->timer.function = &uli526x_timer;
add_timer(&db->timer);
return 0;
}
/* Initialize ULI526X board
* Reset ULI526X board
* Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
static void uli526x_init(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = db->ioaddr;
u8 phy_tmp;
u16 phy_value;
u16 phy_reg_reset;
ULI526X_DBUG(0, "uli526x_init()", 0);
/* Reset M526x MAC controller */
outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */
udelay(100);
outl(db->cr0_data, ioaddr + DCR0);
udelay(5);
/* Phy addr : In some boards,M5261/M5263 phy address != 1 */
db->phy_addr = 1;
for(phy_tmp=0;phy_tmp<32;phy_tmp++)
{
phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
if(phy_value != 0xffff&&phy_value!=0)
{
db->phy_addr = phy_tmp;
break;
}
}
if(phy_tmp == 32)
printk(KERN_WARNING "Can not find the phy address!!!");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
/* Phyxcer capability setting */
phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
phy_reg_reset = (phy_reg_reset | 0x8000);
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
udelay(500);
/* Process Phyxcer Media Mode */
uli526x_set_phyxcer(db);
/* Media Mode Process */
if ( !(db->media_mode & ULI526X_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
/* Initialize Transmit/Receive decriptor and CR3/4 */
uli526x_descriptor_init(db, ioaddr);
/* Init CR6 to program M526X operation */
update_cr6(db->cr6_data, ioaddr);
/* Send setup frame */
send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
outl(db->cr7_data, ioaddr + DCR7);
/* Init CR15, Tx jabber and Rx watchdog timer */
outl(db->cr15_data, ioaddr + DCR15);
/* Enable ULI526X Tx/Rx function */
db->cr6_data |= CR6_RXSC | CR6_TXSC;
update_cr6(db->cr6_data, ioaddr);
}
/*
* Hardware start transmission.
* Send a packet to media from the upper layer.
*/
static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
unsigned long flags;
ULI526X_DBUG(0, "uli526x_start_xmit", 0);
/* Resource flag check */
netif_stop_queue(dev);
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return 0;
}
spin_lock_irqsave(&db->lock, flags);
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
return 1;
}
/* Disable NIC interrupt */
outl(0, dev->base_addr + DCR7);
/* transmit this packet */
txptr = db->tx_insert_ptr;
memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
/* Point to next transmit free descriptor */
db->tx_insert_ptr = txptr->next_tx_desc;
/* Transmit Packet Process */
if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
dev->trans_start = jiffies; /* saved time stamp */
}
/* Tx resource check */
if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
netif_wake_queue(dev);
/* Restore CR7 to enable interrupt */
spin_unlock_irqrestore(&db->lock, flags);
outl(db->cr7_data, dev->base_addr + DCR7);
/* free this SKB */
dev_kfree_skb(skb);
return 0;
}
/*
* Stop the interface.
* The interface is stopped when it is brought.
*/
static int uli526x_stop(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
ULI526X_DBUG(0, "uli526x_stop", 0);
/* disable system */
netif_stop_queue(dev);
/* deleted timer */
del_timer_sync(&db->timer);
/* Reset & stop ULI526X board */
outl(ULI526X_RESET, ioaddr + DCR0);
udelay(5);
phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
/* free interrupt */
free_irq(dev->irq, dev);
/* free allocated rx buffer */
uli526x_free_rxbuffer(db);
#if 0
/* show statistic counter */
printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
db->reset_fatal, db->reset_TXtimeout);
#endif
return 0;
}
/*
* M5261/M5263 insterrupt handler
* receive the packet to upper layer, free the transmitted packet
*/
static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = dev_id;
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
unsigned long flags;
if (!dev) {
ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
return IRQ_NONE;
}
spin_lock_irqsave(&db->lock, flags);
outl(0, ioaddr + DCR7);
/* Got ULI526X status */
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
spin_unlock_irqrestore(&db->lock, flags);
outl(db->cr7_data, ioaddr + DCR7);
return IRQ_HANDLED;
}
/* Check system status */
if (db->cr5_data & 0x2000) {
/* system bus error happen */
ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
db->reset_fatal++;
db->wait_reset = 1; /* Need to RESET */
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
/* Received the coming packet */
if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
uli526x_rx_packet(dev, db);
/* reallocate rx descriptor buffer */
if (db->rx_avail_cnt<RX_DESC_CNT)
allocate_rx_buffer(db);
/* Free the transmitted descriptor */
if ( db->cr5_data & 0x01)
uli526x_free_tx_pkt(dev, db);
/* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
/*
* Free TX resource after TX complete
*/
static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
{
struct tx_desc *txptr;
u32 tdes0;
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
tdes0 = le32_to_cpu(txptr->tdes0);
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
if (tdes0 & 0x80000000)
break;
/* A packet sent completed */
db->tx_packet_cnt--;
db->stats.tx_packets++;
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
db->stats.collisions += (tdes0 >> 3) & 0xf;
db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
db->stats.tx_errors++;
if (tdes0 & 0x0002) { /* UnderRun */
db->tx_fifo_underrun++;
if ( !(db->cr6_data & CR6_SFT) ) {
db->cr6_data = db->cr6_data | CR6_SFT;
update_cr6(db->cr6_data, db->ioaddr);
}
}
if (tdes0 & 0x0100)
db->tx_excessive_collision++;
if (tdes0 & 0x0200)
db->tx_late_collision++;
if (tdes0 & 0x0400)
db->tx_no_carrier++;
if (tdes0 & 0x0800)
db->tx_loss_carrier++;
if (tdes0 & 0x4000)
db->tx_jabber_timeout++;
}
}
txptr = txptr->next_tx_desc;
}/* End of while */
/* Update TX remove pointer to next */
db->tx_remove_ptr = txptr;
/* Resource available check */
if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
netif_wake_queue(dev); /* Active upper layer, send again */
}
/*
* Receive the come packet and pass to upper layer
*/
static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
{
struct rx_desc *rxptr;
struct sk_buff *skb;
int rxlen;
u32 rdes0;
rxptr = db->rx_ready_ptr;
while(db->rx_avail_cnt) {
rdes0 = le32_to_cpu(rxptr->rdes0);
if (rdes0 & 0x80000000) /* packet owner check */
{
break;
}
db->rx_avail_cnt--;
db->interval_rx_cnt++;
pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
/* reuse this SKB */
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
/* A packet with First/Last flag */
rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
db->stats.rx_errors++;
if (rdes0 & 1)
db->stats.rx_fifo_errors++;
if (rdes0 & 2)
db->stats.rx_crc_errors++;
if (rdes0 & 0x80)
db->stats.rx_length_errors++;
}
if ( !(rdes0 & 0x8000) ||
((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
skb = rxptr->rx_skb_ptr;
/* Good packet, send to upper layer */
/* Shorst packet used new SKB */
if ( (rxlen < RX_COPY_SIZE) &&
( (skb = dev_alloc_skb(rxlen + 2) )
!= NULL) ) {
/* size less than COPY_SIZE, allocate a rxlen SKB */
skb->dev = dev;
skb_reserve(skb, 2); /* 16byte align */
memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
skb->dev = dev;
skb_put(skb, rxlen);
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
db->stats.rx_packets++;
db->stats.rx_bytes += rxlen;
} else {
/* Reuse SKB buffer when the packet is error */
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
}
}
rxptr = rxptr->next_rx_desc;
}
db->rx_ready_ptr = rxptr;
}
/*
* Get statistics from driver.
*/
static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_get_stats", 0);
return &db->stats;
}
/*
* Set ULI526X multicast address
*/
static void uli526x_set_filter_mode(struct net_device * dev)
{
struct uli526x_board_info *db = dev->priv;
unsigned long flags;
ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
spin_lock_irqsave(&db->lock, flags);
if (dev->flags & IFF_PROMISC) {
ULI526X_DBUG(0, "Enable PROM Mode", 0);
db->cr6_data |= CR6_PM | CR6_PBF;
update_cr6(db->cr6_data, db->ioaddr);
spin_unlock_irqrestore(&db->lock, flags);
return;
}
if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
db->cr6_data &= ~(CR6_PM | CR6_PBF);
db->cr6_data |= CR6_PAM;
spin_unlock_irqrestore(&db->lock, flags);
return;
}
ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
spin_unlock_irqrestore(&db->lock, flags);
}
static void
ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
{
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_MII);
ecmd->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_Autoneg |
ADVERTISED_MII);
ecmd->port = PORT_MII;
ecmd->phy_address = db->phy_addr;
ecmd->transceiver = XCVR_EXTERNAL;
ecmd->speed = 10;
ecmd->duplex = DUPLEX_HALF;
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
ecmd->speed = 100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
ecmd->duplex = DUPLEX_FULL;
}
if(db->link_failed)
{
ecmd->speed = -1;
ecmd->duplex = -1;
}
if (db->media_mode & ULI526X_AUTO)
{
ecmd->autoneg = AUTONEG_ENABLE;
}
}
static void netdev_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct uli526x_board_info *np = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
if (np->pdev)
strcpy(info->bus_info, pci_name(np->pdev));
else
sprintf(info->bus_info, "EISA 0x%lx %d",
dev->base_addr, dev->irq);
}
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
struct uli526x_board_info *np = netdev_priv(dev);
ULi_ethtool_gset(np, cmd);
return 0;
}
static u32 netdev_get_link(struct net_device *dev) {
struct uli526x_board_info *np = netdev_priv(dev);
if(np->link_failed)
return 0;
else
return 1;
}
static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
wol->supported = WAKE_PHY | WAKE_MAGIC;
wol->wolopts = 0;
}
static struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.get_link = netdev_get_link,
.get_wol = uli526x_get_wol,
};
/*
* A periodic timer routine
* Dynamic media sense, allocate Rx buffer...
*/
static void uli526x_timer(unsigned long data)
{
u32 tmp_cr8;
unsigned char tmp_cr12=0;
struct net_device *dev = (struct net_device *) data;
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long flags;
u8 TmpSpeed=10;
//ULI526X_DBUG(0, "uli526x_timer()", 0);
spin_lock_irqsave(&db->lock, flags);
/* Dynamic reset ULI526X : system error or transmit time-out */
tmp_cr8 = inl(db->ioaddr + DCR8);
if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
db->reset_cr8++;
db->wait_reset = 1;
}
db->interval_rx_cnt = 0;
/* TX polling kick monitor */
if ( db->tx_packet_cnt &&
time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
outl(0x1, dev->base_addr + DCR1); // Tx polling again
// TX Timeout
if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
printk( "%s: Tx timeout - resetting\n",
dev->name);
}
}
if (db->wait_reset) {
ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
db->reset_count++;
uli526x_dynamic_reset(dev);
db->timer.expires = ULI526X_TIMER_WUT;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
return;
}
/* Link status check, Dynamic media type change */
if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
tmp_cr12 = 3;
if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
/* AUTO don't need */
if ( !(db->media_mode & 0x8) )
phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
/* AUTO mode, if INT phyxcer link failed, select EXT device */
if (db->media_mode & ULI526X_AUTO) {
db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
update_cr6(db->cr6_data, db->ioaddr);
}
} else
if ((tmp_cr12 & 0x3) && db->link_failed) {
ULI526X_DBUG(0, "Link link OK", tmp_cr12);
db->link_failed = 0;
/* Auto Sense Speed */
if ( (db->media_mode & ULI526X_AUTO) &&
uli526x_sense_speed(db) )
db->link_failed = 1;
uli526x_process_mode(db);
if(db->link_failed==0)
{
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
TmpSpeed = 100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
}
else
{
printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
}
netif_carrier_on(dev);
}
/* SHOW_MEDIA_TYPE(db->op_mode); */
}
else if(!(tmp_cr12 & 0x3) && db->link_failed)
{
if(db->init==1)
{
printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
netif_carrier_off(dev);
}
}
db->init=0;
/* Timer active again */
db->timer.expires = ULI526X_TIMER_WUT;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
}
/*
* Dynamic reset the ULI526X board
* Stop ULI526X board
* Free Tx/Rx allocated memory
* Reset ULI526X board
* Re-initialize ULI526X board
*/
static void uli526x_dynamic_reset(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
/* Sopt MAC controller */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
update_cr6(db->cr6_data, dev->base_addr);
outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
/* Disable upper layer interface */
netif_stop_queue(dev);
/* Free Rx Allocate buffer */
uli526x_free_rxbuffer(db);
/* system variable init */
db->tx_packet_cnt = 0;
db->rx_avail_cnt = 0;
db->link_failed = 1;
db->init=1;
db->wait_reset = 0;
/* Re-initialize ULI526X board */
uli526x_init(dev);
/* Restart upper layer interface */
netif_wake_queue(dev);
}
/*
* free all allocated rx buffer
*/
static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
{
ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
/* free allocated rx buffer */
while (db->rx_avail_cnt) {
dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
db->rx_avail_cnt--;
}
}
/*
* Reuse the SK buffer
*/
static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
{
struct rx_desc *rxptr = db->rx_insert_ptr;
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
db->rx_insert_ptr = rxptr->next_rx_desc;
} else
ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
}
/*
* Initialize transmit/Receive descriptor
* Using Chain structure, and allocate Tx/Rx buffer
*/
static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
{
struct tx_desc *tmp_tx;
struct rx_desc *tmp_rx;
unsigned char *tmp_buf;
dma_addr_t tmp_tx_dma, tmp_rx_dma;
dma_addr_t tmp_buf_dma;
int i;
ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
/* tx descriptor start pointer */
db->tx_insert_ptr = db->first_tx_desc;
db->tx_remove_ptr = db->first_tx_desc;
outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
/* rx descriptor start pointer */
db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
/* Init Transmit chain */
tmp_buf = db->buf_pool_start;
tmp_buf_dma = db->buf_pool_dma_start;
tmp_tx_dma = db->first_tx_desc_dma;
for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
tmp_tx->tx_buf_ptr = tmp_buf;
tmp_tx->tdes0 = cpu_to_le32(0);
tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
tmp_tx_dma += sizeof(struct tx_desc);
tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
tmp_tx->next_tx_desc = tmp_tx + 1;
tmp_buf = tmp_buf + TX_BUF_ALLOC;
tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
}
(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
tmp_tx->next_tx_desc = db->first_tx_desc;
/* Init Receive descriptor chain */
tmp_rx_dma=db->first_rx_desc_dma;
for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
tmp_rx->rdes0 = cpu_to_le32(0);
tmp_rx->rdes1 = cpu_to_le32(0x01000600);
tmp_rx_dma += sizeof(struct rx_desc);
tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
tmp_rx->next_rx_desc = tmp_rx + 1;
}
(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
tmp_rx->next_rx_desc = db->first_rx_desc;
/* pre-allocate Rx buffer */
allocate_rx_buffer(db);
}
/*
* Update CR6 value
* Firstly stop ULI526X, then written value and start
*/
static void update_cr6(u32 cr6_data, unsigned long ioaddr)
{
outl(cr6_data, ioaddr + DCR6);
udelay(5);
}
/*
* Send a setup frame for M5261/M5263
* This setup frame initialize ULI526X address filter mode
*/
static void send_filter_frame(struct net_device *dev, int mc_cnt)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct dev_mc_list *mcptr;
struct tx_desc *txptr;
u16 * addrptr;
u32 * suptr;
int i;
ULI526X_DBUG(0, "send_filter_frame()", 0);
txptr = db->tx_insert_ptr;
suptr = (u32 *) txptr->tx_buf_ptr;
/* Node address */
addrptr = (u16 *) dev->dev_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
/* broadcast address */
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
/* fit the multicast address */
for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
}
for (; i<14; i++) {
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
}
/* prepare the setup frame */
db->tx_insert_ptr = txptr->next_tx_desc;
txptr->tdes1 = cpu_to_le32(0x890000c0);
/* Resource Check and Send the setup packet */
if (db->tx_packet_cnt < TX_DESC_CNT) {
/* Resource Empty */
db->tx_packet_cnt++;
txptr->tdes0 = cpu_to_le32(0x80000000);
update_cr6(db->cr6_data | 0x2000, dev->base_addr);
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
}
/*
* Allocate rx buffer,
* As possible as allocate maxiumn Rx buffer
*/
static void allocate_rx_buffer(struct uli526x_board_info *db)
{
struct rx_desc *rxptr;
struct sk_buff *skb;
rxptr = db->rx_insert_ptr;
while(db->rx_avail_cnt < RX_DESC_CNT) {
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
db->rx_avail_cnt++;
}
db->rx_insert_ptr = rxptr;
}
/*
* Read one word data from the serial ROM
*/
static u16 read_srom_word(long ioaddr, int offset)
{
int i;
u16 srom_data = 0;
long cr9_ioaddr = ioaddr + DCR9;
outl(CR9_SROM_READ, cr9_ioaddr);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
/* Send the Read Command 110b */
SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
/* Send the offset */
for (i = 5; i >= 0; i--) {
srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
SROM_CLK_WRITE(srom_data, cr9_ioaddr);
}
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
for (i = 16; i > 0; i--) {
outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
udelay(5);
srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
udelay(5);
}
outl(CR9_SROM_READ, cr9_ioaddr);
return srom_data;
}
/*
* Auto sense the media mode
*/
static u8 uli526x_sense_speed(struct uli526x_board_info * db)
{
u8 ErrFlag = 0;
u16 phy_mode;
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
if ( (phy_mode & 0x24) == 0x24 ) {
phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
if(phy_mode&0x8000)
phy_mode = 0x8000;
else if(phy_mode&0x4000)
phy_mode = 0x4000;
else if(phy_mode&0x2000)
phy_mode = 0x2000;
else
phy_mode = 0x1000;
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = ULI526X_10MHF; break;
case 0x2000: db->op_mode = ULI526X_10MFD; break;
case 0x4000: db->op_mode = ULI526X_100MHF; break;
case 0x8000: db->op_mode = ULI526X_100MFD; break;
default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
}
} else {
db->op_mode = ULI526X_10MHF;
ULI526X_DBUG(0, "Link Failed :", phy_mode);
ErrFlag = 1;
}
return ErrFlag;
}
/*
* Set 10/100 phyxcer capability
* AUTO mode : phyxcer register4 is NIC capability
* Force mode: phyxcer register4 is the force media
*/
static void uli526x_set_phyxcer(struct uli526x_board_info *db)
{
u16 phy_reg;
/* Phyxcer capability setting */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
if (db->media_mode & ULI526X_AUTO) {
/* AUTO Mode */
phy_reg |= db->PHY_reg4;
} else {
/* Force Mode */
switch(db->media_mode) {
case ULI526X_10MHF: phy_reg |= 0x20; break;
case ULI526X_10MFD: phy_reg |= 0x40; break;
case ULI526X_100MHF: phy_reg |= 0x80; break;
case ULI526X_100MFD: phy_reg |= 0x100; break;
}
}
/* Write new capability to Phyxcer Reg4 */
if ( !(phy_reg & 0x01e0)) {
phy_reg|=db->PHY_reg4;
db->media_mode|=ULI526X_AUTO;
}
phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
/* Restart Auto-Negotiation */
phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
udelay(50);
}
/*
* Process op-mode
AUTO mode : PHY controller in Auto-negotiation Mode
* Force mode: PHY controller in force mode with HUB
* N-way force capability with SWITCH
*/
static void uli526x_process_mode(struct uli526x_board_info *db)
{
u16 phy_reg;
/* Full Duplex Mode Check */
if (db->op_mode & 0x4)
db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
else
db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
update_cr6(db->cr6_data, db->ioaddr);
/* 10/100M phyxcer force mode need */
if ( !(db->media_mode & 0x8)) {
/* Forece Mode */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
if ( !(phy_reg & 0x1) ) {
/* parter without N-Way capability */
phy_reg = 0x0;
switch(db->op_mode) {
case ULI526X_10MHF: phy_reg = 0x0; break;
case ULI526X_10MFD: phy_reg = 0x100; break;
case ULI526X_100MHF: phy_reg = 0x2000; break;
case ULI526X_100MFD: phy_reg = 0x2100; break;
}
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
}
}
}
/*
* Write a word to Phy register
*/
static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
{
u16 i;
unsigned long ioaddr;
if(chip_id == PCI_ULI5263_ID)
{
phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
return;
}
/* M5261/M5263 Chip */
ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send start command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send write command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* written trasnition */
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
/* Write a word data to PHY controller */
for ( i = 0x8000; i > 0; i >>= 1)
phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
}
/*
* Read a word data from phy register
*/
static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
{
int i;
u16 phy_data;
unsigned long ioaddr;
if(chip_id == PCI_ULI5263_ID)
return phy_readby_cr10(iobase, phy_addr, offset);
/* M5261/M5263 Chip */
ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send start command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send read command(10) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Skip transition state */
phy_read_1bit(ioaddr, chip_id);
/* read 16bit data */
for (phy_data = 0, i = 0; i < 16; i++) {
phy_data <<= 1;
phy_data |= phy_read_1bit(ioaddr, chip_id);
}
return phy_data;
}
static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
{
unsigned long ioaddr,cr10_value;
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
cr10_value = (cr10_value<<16) + 0x08000000;
outl(cr10_value,ioaddr);
udelay(1);
while(1)
{
cr10_value = inl(ioaddr);
if(cr10_value&0x10000000)
break;
}
return (cr10_value&0x0ffff);
}
static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
{
unsigned long ioaddr,cr10_value;
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
outl(cr10_value,ioaddr);
udelay(1);
}
/*
* Write one bit data to Phy Controller
*/
static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
{
outl(phy_data , ioaddr); /* MII Clock Low */
udelay(1);
outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
udelay(1);
outl(phy_data , ioaddr); /* MII Clock Low */
udelay(1);
}
/*
* Read one bit phy data from PHY controller
*/
static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
{
u16 phy_data;
outl(0x50000 , ioaddr);
udelay(1);
phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
outl(0x40000 , ioaddr);
udelay(1);
return phy_data;
}
static struct pci_device_id uli526x_pci_tbl[] = {
{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
static struct pci_driver uli526x_driver = {
.name = "uli526x",
.id_table = uli526x_pci_tbl,
.probe = uli526x_init_one,
.remove = __devexit_p(uli526x_remove_one),
};
MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
MODULE_LICENSE("GPL");
MODULE_PARM(debug, "i");
MODULE_PARM(mode, "i");
MODULE_PARM(cr6set, "i");
MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
/* Description:
* when user used insmod to add module, system invoked init_module()
* to register the services.
*/
static int __init uli526x_init_module(void)
{
int rc;
printk(version);
printed_version = 1;
ULI526X_DBUG(0, "init_module() ", debug);
if (debug)
uli526x_debug = debug; /* set debug flag */
if (cr6set)
uli526x_cr6_user_set = cr6set;
switch(mode) {
case ULI526X_10MHF:
case ULI526X_100MHF:
case ULI526X_10MFD:
case ULI526X_100MFD:
uli526x_media_mode = mode;
break;
default:uli526x_media_mode = ULI526X_AUTO;
break;
}
rc = pci_module_init(&uli526x_driver);
if (rc < 0)
return rc;
return 0;
}
/*
* Description:
* when user used rmmod to delete module, system invoked clean_module()
* to un-register all registered services.
*/
static void __exit uli526x_cleanup_module(void)
{
ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
pci_unregister_driver(&uli526x_driver);
}
module_init(uli526x_init_module);
module_exit(uli526x_cleanup_module);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7