Commit 17e22528 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Tony Lindgren

ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC

Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm-revc.dts.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 58c3b88d
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include "dra72-evm-common.dtsi" #include "dra72-evm-common.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/net/ti-dp83867.h>
/ { / {
...@@ -94,9 +95,22 @@ dp83867_1: ethernet-phy@3 { ...@@ -94,9 +95,22 @@ dp83867_1: ethernet-phy@3 {
}; };
&mmc1 { &mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vqmmc-supply = <&ldo1_reg>; vqmmc-supply = <&ldo1_reg>;
}; };
&mmc2 { &mmc2 {
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
vmmc-supply = <&evm_1v8_sw>; vmmc-supply = <&evm_1v8_sw>;
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment