Skip to content

L
linux
Commit 17e2ec07 authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge kernel.bkbits.net:net-drivers-2.5 

into redhat.com:/spare/repo/net-drivers-2.5
parents 69ad4703 4d92fbee
Hide whitespace changes
Inline Side-by-side
Showing with 6411 additions and 0 deletions
drivers/net/wireless/Kconfig
View file @ 17e2ec07
......@@ -307,6 +307,53 @@ config PCMCIA_WL3501
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
comment "Prism GT/Duette 802.11(a/b/g) PCI/PCMCIA support"
depends on NET_RADIO && PCI
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/PCMCIA'
depends on PCI && NET_RADIO && EXPERIMENTAL && HOTPLUG
select FW_LOADER
---help---
Enable PCI and Cardbus support for the following chipset based cards:
ISL3880 - Prism GT 802.11 b/g
ISL3877 - Prism Indigo 802.11 a
ISL3890 - Prism Duette 802.11 a/b/g
For a complete list of supported cards visit <http://prism54.org>.
Here is the latest confirmed list of supported cards:
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
Allnet ALL0271 PCI Card
Compex WL54G Cardbus Card
Corega CG-WLCB54GT Cardbus Card
D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
I-O Data WN-G54/CB Cardbus Card
Kobishi XG-300 aka Z-Com Cardbus Card
Netgear WG511 Cardbus Card
Ovislink WL-5400PCI PCI Card
Peabird WLG-PCI PCI Card
Sitecom WL-100i Cardbus Card
Sitecom WL-110i PCI Card
SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
Z-Com XG-900 PCI Card
Zyxel G-100 Cardbus Card
If you enable this you will need a firmware file as well.
You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
You can get this non-GPL'd firmware file from the Prism54 project page:
<http://prism54.org>
You will also need the /etc/hotplug/firmware.agent script from
a current hotplug package.
Note: You need a motherboard with DMA support to use any of these cards
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called prism54.ko.
# yes, this works even when no drivers are selected
config NET_WIRELESS
bool
......
drivers/net/wireless/Makefile
View file @ 17e2ec07
......@@ -26,6 +26,8 @@ obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_PRISM54) += prism54/
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
drivers/net/wireless/prism54/Makefile 0 → 100644
View file @ 17e2ec07
# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $
prism54-objs := islpci_eth.o islpci_mgt.o \
isl_38xx.o isl_ioctl.o islpci_dev.o \
islpci_hotplug.o oid_mgt.o
obj-$(CONFIG_PRISM54) += prism54.o
EXTRA_CFLAGS = -I$(PWD) #-DCONFIG_PRISM54_WDS
drivers/net/wireless/prism54/isl_38xx.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/isl_38xx.c,v 1.22 2004/02/28 03:06:07 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#define __KERNEL_SYSCALLS__
#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include "isl_38xx.h"
#include <linux/firmware.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/config.h>
#if !defined(CONFIG_FW_LOADER) && !defined(CONFIG_FW_LOADER_MODULE)
#error No Firmware Loading configured in the kernel !
#endif
#include "islpci_dev.h"
#include "islpci_mgt.h"
/******************************************************************************
Device Interface & Control functions
******************************************************************************/
/**
* isl38xx_disable_interrupts - disable all interrupts
* @device: pci memory base address
*
* Instructs the device to disable all interrupt reporting by asserting
* the IRQ line. New events may still show up in the interrupt identification
* register located at offset %ISL38XX_INT_IDENT_REG.
*/
void
isl38xx_disable_interrupts(void *device)
{
isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG);
udelay(ISL38XX_WRITEIO_DELAY);
}
void
isl38xx_handle_sleep_request(isl38xx_control_block *control_block,
int *powerstate, void *device_base)
{
/* device requests to go into sleep mode
* check whether the transmit queues for data and management are empty */
if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ))
/* data tx queue not empty */
return;
if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
/* management tx queue not empty */
return;
/* check also whether received frames are pending */
if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ))
/* data rx queue not empty */
return;
if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ))
/* management rx queue not empty */
return;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "Device going to sleep mode\n");
#endif
/* all queues are empty, allow the device to go into sleep mode */
*powerstate = ISL38XX_PSM_POWERSAVE_STATE;
/* assert the Sleep interrupt in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
}
void
isl38xx_handle_wakeup(isl38xx_control_block *control_block,
int *powerstate, void *device_base)
{
/* device is in active state, update the powerstate flag */
*powerstate = ISL38XX_PSM_ACTIVE_STATE;
/* now check whether there are frames pending for the card */
if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)
&& !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
return;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n");
#endif
/* either data or management transmit queue has a frame pending
* trigger the device by setting the Update bit in the Device Int reg */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
}
void
isl38xx_trigger_device(int asleep, void *device_base)
{
struct timeval current_time;
u32 reg, counter = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
#endif
/* check whether the device is in power save mode */
if (asleep) {
/* device is in powersave, trigger the device for wakeup */
#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n",
current_time.tv_sec, current_time.tv_usec);
#endif
DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
current_time.tv_sec, current_time.tv_usec,
readl(device_base + ISL38XX_CTRL_STAT_REG));
udelay(ISL38XX_WRITEIO_DELAY);
if (reg = readl(device_base + ISL38XX_INT_IDENT_REG),
reg == 0xabadface) {
#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING,
"%08li.%08li Device register abadface\n",
current_time.tv_sec, current_time.tv_usec);
#endif
/* read the Device Status Register until Sleepmode bit is set */
while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
(reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) {
udelay(ISL38XX_WRITEIO_DELAY);
counter++;
}
DEBUG(SHOW_TRACING,
"%08li.%08li Device register read %08x\n",
current_time.tv_sec, current_time.tv_usec,
readl(device_base + ISL38XX_CTRL_STAT_REG));
udelay(ISL38XX_WRITEIO_DELAY);
#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING,
"%08li.%08li Device asleep counter %i\n",
current_time.tv_sec, current_time.tv_usec,
counter);
#endif
}
/* assert the Wakeup interrupt in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
/* perform another read on the Device Status Register */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
current_time.tv_sec, current_time.tv_usec, reg);
#endif
} else {
/* device is (still) awake */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "Device is in active state\n");
#endif
/* trigger the device by setting the Update bit in the Device Int reg */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
}
}
void
isl38xx_interface_reset(void *device_base, dma_addr_t host_address)
{
u32 reg;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset \n");
#endif
/* load the address of the control block in the device */
isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG);
udelay(ISL38XX_WRITEIO_DELAY);
/* set the reset bit in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
/* enable the interrupt for detecting initialization */
/* Note: Do not enable other interrupts here. We want the
* device to have come up first 100% before allowing any other
* interrupts. */
reg = ISL38XX_INT_IDENT_INIT;
isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */
}
void
isl38xx_enable_common_interrupts(void *device_base) {
u32 reg;
reg = ( ISL38XX_INT_IDENT_UPDATE |
ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP);
isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
udelay(ISL38XX_WRITEIO_DELAY);
}
int
isl38xx_upload_firmware(char *fw_id, _REQ_FW_DEV_T dev, void *device_base,
dma_addr_t host_address)
{
u32 reg, rc;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_ERROR_MESSAGES, "isl38xx_upload_firmware(0x%lx, 0x%lx)\n",
(long) device_base, (long) host_address);
#endif
/* clear the RAMBoot and the Reset bit */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
reg &= ~ISL38XX_CTRL_STAT_RESET;
reg &= ~ISL38XX_CTRL_STAT_RAMBOOT;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
/* set the Reset bit without reading the register ! */
reg |= ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
/* clear the Reset bit */
reg &= ~ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
/* wait a while for the device to reboot */
mdelay(50);
{
const struct firmware *fw_entry = 0;
long fw_len;
const u32 *fw_ptr;
rc = request_firmware(&fw_entry, fw_id, dev);
if (rc) {
printk(KERN_ERR
"%s: request_firmware() failed for '%s'\n",
"prism54", fw_id);
return rc;
}
/* prepare the Direct Memory Base register */
reg = ISL38XX_DEV_FIRMWARE_ADDRES;
fw_ptr = (u32 *) fw_entry->data;
fw_len = fw_entry->size;
if (fw_len % 4) {
printk(KERN_ERR
"%s: firmware '%s' size is not multiple of 32bit, aborting!\n",
"prism54", fw_id);
release_firmware(fw_entry);
return EILSEQ; /* Illegal byte sequence */;
}
while (fw_len > 0) {
long _fw_len =
(fw_len >
ISL38XX_MEMORY_WINDOW_SIZE) ?
ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
u32 *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
/* set the cards base address for writting the data */
isl38xx_w32_flush(device_base, reg,
ISL38XX_DIR_MEM_BASE_REG);
wmb(); /* be paranoid */
/* increment the write address for next iteration */
reg += _fw_len;
fw_len -= _fw_len;
/* write the data to the Direct Memory Window 32bit-wise */
/* memcpy_toio() doesn't guarantee 32bit writes :-| */
while (_fw_len > 0) {
/* use non-swapping writel() */
__raw_writel(*fw_ptr, dev_fw_ptr);
fw_ptr++, dev_fw_ptr++;
_fw_len -= 4;
}
/* flush PCI posting */
(void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH);
wmb(); /* be paranoid again */
BUG_ON(_fw_len != 0);
}
BUG_ON(fw_len != 0);
release_firmware(fw_entry);
}
/* now reset the device
* clear the Reset & ClkRun bit, set the RAMBoot bit */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
reg &= ~ISL38XX_CTRL_STAT_CLKRUN;
reg &= ~ISL38XX_CTRL_STAT_RESET;
reg |= ISL38XX_CTRL_STAT_RAMBOOT;
isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG);
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
/* set the reset bit latches the host override and RAMBoot bits
* into the device for operation when the reset bit is reset */
reg |= ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
/* don't do flush PCI posting here! */
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
/* clear the reset bit should start the whole circus */
reg &= ~ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
/* don't do flush PCI posting here! */
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
return 0;
}
int
isl38xx_in_queue(isl38xx_control_block *cb, int queue)
{
const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) -
le32_to_cpu(cb->device_curr_frag[queue]));
/* determine the amount of fragments in the queue depending on the type
* of the queue, either transmit or receive */
BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */
switch (queue) {
/* send queues */
case ISL38XX_CB_TX_MGMTQ:
BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
case ISL38XX_CB_TX_DATA_LQ:
case ISL38XX_CB_TX_DATA_HQ:
BUG_ON(delta > ISL38XX_CB_TX_QSIZE);
return delta;
break;
/* receive queues */
case ISL38XX_CB_RX_MGMTQ:
BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
return ISL38XX_CB_MGMT_QSIZE - delta;
break;
case ISL38XX_CB_RX_DATA_LQ:
case ISL38XX_CB_RX_DATA_HQ:
BUG_ON(delta > ISL38XX_CB_RX_QSIZE);
return ISL38XX_CB_RX_QSIZE - delta;
break;
}
BUG();
return 0;
}
drivers/net/wireless/prism54/isl_38xx.h 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/isl_38xx.h,v 1.22 2004/02/28 03:06:07 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISL_38XX_H
#define _ISL_38XX_H
#include <linux/version.h>
#include <asm/io.h>
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,75))
#include <linux/device.h>
# define _REQ_FW_DEV_T struct device *
#else
# define _REQ_FW_DEV_T char *
#endif
#include <asm/byteorder.h>
#define ISL38XX_CB_RX_QSIZE 8
#define ISL38XX_CB_TX_QSIZE 32
/* ISL38XX Access Point Specific definitions */
#define ISL38XX_MAX_WDS_LINKS 8
/* ISL38xx Client Specific definitions */
#define ISL38XX_PSM_ACTIVE_STATE 0
#define ISL38XX_PSM_POWERSAVE_STATE 1
/* ISL38XX Host Interface Definitions */
#define ISL38XX_PCI_MEM_SIZE 0x02000
#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
#define ISL38XX_WRITEIO_DELAY 10 /* in us */
#define ISL38XX_RESET_DELAY 50 /* in ms */
#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
#define ISL38XX_MAX_WAIT_CYCLES 10
/* PCI Memory Area */
#define ISL38XX_HARDWARE_REG 0x0000
#define ISL38XX_CARDBUS_CIS 0x0800
#define ISL38XX_DIRECT_MEM_WIN 0x1000
/* Hardware registers */
#define ISL38XX_DEV_INT_REG 0x0000
#define ISL38XX_INT_IDENT_REG 0x0010
#define ISL38XX_INT_ACK_REG 0x0014
#define ISL38XX_INT_EN_REG 0x0018
#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
#define ISL38XX_DIR_MEM_BASE_REG 0x0030
#define ISL38XX_CTRL_STAT_REG 0x0078
/* High end mobos queue up pci writes, the following
* is used to "read" from after a write to force flush */
#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
/**
* isl38xx_w32_flush - PCI iomem write helper
* @base: (host) memory base address of the device
* @val: 32bit value (host order) to write
* @offset: byte offset into @base to write value to
*
* This helper takes care of writing a 32bit datum to the
* specified offset into the device's pci memory space, and making sure
* the pci memory buffers get flushed by performing one harmless read
* from the %ISL38XX_PCI_POSTING_FLUSH offset.
*/
static inline void
isl38xx_w32_flush(void *base, u32 val, unsigned long offset)
{
writel(val, base + offset);
(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
}
/* Device Interrupt register bits */
#define ISL38XX_DEV_INT_RESET 0x0001
#define ISL38XX_DEV_INT_UPDATE 0x0002
#define ISL38XX_DEV_INT_WAKEUP 0x0008
#define ISL38XX_DEV_INT_SLEEP 0x0010
/* Interrupt Identification/Acknowledge/Enable register bits */
#define ISL38XX_INT_IDENT_UPDATE 0x0002
#define ISL38XX_INT_IDENT_INIT 0x0004
#define ISL38XX_INT_IDENT_WAKEUP 0x0008
#define ISL38XX_INT_IDENT_SLEEP 0x0010
#define ISL38XX_INT_SOURCES 0x001E
/* Control/Status register bits */
#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
#define ISL38XX_CTRL_STAT_RESET 0x10000000
#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
/* Control Block definitions */
#define ISL38XX_CB_RX_DATA_LQ 0
#define ISL38XX_CB_TX_DATA_LQ 1
#define ISL38XX_CB_RX_DATA_HQ 2
#define ISL38XX_CB_TX_DATA_HQ 3
#define ISL38XX_CB_RX_MGMTQ 4
#define ISL38XX_CB_TX_MGMTQ 5
#define ISL38XX_CB_QCOUNT 6
#define ISL38XX_CB_MGMT_QSIZE 4
#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */
/* Memory Manager definitions */
#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
#define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */
#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
#define CONTROL_BLOCK_SIZE 1024 /* should be enough */
#define PSM_FRAME_SIZE 1536
#define PSM_MINIMAL_STATION_COUNT 64
#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
#define MAX_TRAP_RX_QUEUE 4
#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
/* Fragment package definitions */
#define FRAGMENT_FLAG_MF 0x0001
#define MAX_FRAGMENT_SIZE 1536
/* In monitor mode frames have a header. I don't know exactly how big those
* frame can be but I've never seen any frame bigger than 1584... :
*/
#define MAX_FRAGMENT_SIZE_RX 1600
typedef struct {
u32 address; /* physical address on host */
u16 size; /* packet size */
u16 flags; /* set of bit-wise flags */
} isl38xx_fragment;
struct isl38xx_cb {
u32 driver_curr_frag[ISL38XX_CB_QCOUNT];
u32 device_curr_frag[ISL38XX_CB_QCOUNT];
isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
};
typedef struct isl38xx_cb isl38xx_control_block;
/* determine number of entries currently in queue */
int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
void isl38xx_disable_interrupts(void *);
void isl38xx_enable_common_interrupts(void *);
void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
void *);
void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void *);
void isl38xx_trigger_device(int, void *);
void isl38xx_interface_reset(void *, dma_addr_t);
int isl38xx_upload_firmware(char *, _REQ_FW_DEV_T, void *, dma_addr_t);
#endif /* _ISL_38XX_H */
drivers/net/wireless/prism54/isl_ioctl.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/isl_ioctl.c,v 1.140 2004/02/28 03:06:07 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* (C) 2003 Aurelien Alleaume <slts@free.fr>
* (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
* (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#include "isl_ioctl.h"
#include "islpci_mgt.h"
#include "isl_oid.h" /* additional types and defs for isl38xx fw */
#include "oid_mgt.h"
#include <net/iw_handler.h> /* New driver API */
static int init_mode = CARD_DEFAULT_IW_MODE;
static int init_channel = CARD_DEFAULT_CHANNEL;
static int init_wep = CARD_DEFAULT_WEP;
static int init_filter = CARD_DEFAULT_FILTER;
static int init_authen = CARD_DEFAULT_AUTHEN;
static int init_dot1x = CARD_DEFAULT_DOT1X;
static int init_conformance = CARD_DEFAULT_CONFORMANCE;
static int init_mlme = CARD_DEFAULT_MLME_MODE;
MODULE_PARM(init_mode, "i");
MODULE_PARM_DESC(init_mode,
"Set card mode:\n0: Auto\n1: Ad-Hoc\n2: Managed Client (Default)\n3: Master / Access Point\n4: Repeater (Not supported yet)\n5: Secondary (Not supported yet)\n6: Monitor");
MODULE_PARM(init_channel, "i");
MODULE_PARM_DESC(init_channel,
"Check `iwpriv ethx channel` for available channels");
MODULE_PARM(init_wep, "i");
MODULE_PARM(init_filter, "i");
MODULE_PARM(init_authen, "i");
MODULE_PARM_DESC(init_authen,
"Authentication method. Can be of seven types:\n0 0x0000: None\n1 0x0001: DOT11_AUTH_OS (Default)\n2 0x0002: DOT11_AUTH_SK\n3 0x0003: DOT11_AUTH_BOTH");
MODULE_PARM(init_dot1x, "i");
MODULE_PARM_DESC(init_dot1x,
"\n0: None/not set (Default)\n1: DOT11_DOT1X_AUTHENABLED\n2: DOT11_DOT1X_KEYTXENABLED");
MODULE_PARM(init_mlme, "i");
MODULE_PARM_DESC(init_mlme,
"Sets the MAC layer management entity (MLME) mode of operation,\n0: DOT11_MLME_AUTO (Default)\n1: DOT11_MLME_INTERMEDIATE\n2: DOT11_MLME_EXTENDED");
/**
* prism54_mib_mode_helper - MIB change mode helper function
* @mib: the &struct islpci_mib object to modify
* @iw_mode: new mode (%IW_MODE_*)
*
* This is a helper function, hence it does not lock. Make sure
* caller deals with locking *if* necessary. This function sets the
* mode-dependent mib values and does the mapping of the Linux
* Wireless API modes to Device firmware modes. It also checks for
* correct valid Linux wireless modes.
*/
int
prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode)
{
u32 config = INL_CONFIG_MANUALRUN;
u32 mode, bsstype;
/* For now, just catch early the Repeater and Secondary modes here */
if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) {
printk(KERN_DEBUG "%s(): Sorry, Repeater mode and Secondary mode "
"are not yet supported by this driver.\n",
__FUNCTION__);
return -EINVAL;
}
priv->iw_mode = iw_mode;
switch (iw_mode) {
case IW_MODE_AUTO:
mode = INL_MODE_CLIENT;
bsstype = DOT11_BSSTYPE_ANY;
break;
case IW_MODE_ADHOC:
mode = INL_MODE_CLIENT;
bsstype = DOT11_BSSTYPE_IBSS;
break;
case IW_MODE_INFRA:
mode = INL_MODE_CLIENT;
bsstype = DOT11_BSSTYPE_INFRA;
break;
case IW_MODE_MASTER:
mode = INL_MODE_AP;
bsstype = DOT11_BSSTYPE_INFRA;
break;
case IW_MODE_MONITOR:
mode = INL_MODE_PROMISCUOUS;
bsstype = DOT11_BSSTYPE_ANY;
config |= INL_CONFIG_RXANNEX;
break;
default:
return -EINVAL;
}
if (init_wds)
config |= INL_CONFIG_WDS;
mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype);
mgt_set(priv, OID_INL_CONFIG, &config);
mgt_set(priv, OID_INL_MODE, &mode);
return 0;
}
/**
* prism54_mib_init - fill MIB cache with defaults
*
* this function initializes the struct given as @mib with defaults,
* of which many are retrieved from the global module parameter
* variables.
*/
void
prism54_mib_init(islpci_private *priv)
{
u32 t;
struct obj_buffer psm_buffer = {
.size = cpu_to_le32(PSM_BUFFER_SIZE),
.addr = cpu_to_le32(priv->device_psm_buffer)
};
mgt_set(priv, DOT11_OID_CHANNEL, &init_channel);
mgt_set(priv, DOT11_OID_AUTHENABLE, &init_authen);
mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &init_wep);
mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer);
mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &init_filter);
mgt_set(priv, DOT11_OID_DOT1XENABLE, &init_dot1x);
mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &init_mlme);
mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &init_conformance);
t = 127;
mgt_set(priv, OID_INL_OUTPUTPOWER, &t);
/* Important: we are setting a default wireless mode and we are
* forcing a valid one, so prism54_mib_mode_helper should just set
* mib values depending on what the wireless mode given is. No need
* for it save old values */
if (init_mode > IW_MODE_MONITOR || init_mode < IW_MODE_AUTO) {
printk(KERN_DEBUG "%s(): You passed a non-valid init_mode. "
"Using default mode\n", __FUNCTION__);
init_mode = CARD_DEFAULT_IW_MODE;
}
/* This sets all of the mode-dependent values */
prism54_mib_mode_helper(priv, init_mode);
}
void
prism54_mib_init_work(islpci_private *priv)
{
down_write(&priv->mib_sem);
mgt_commit(priv);
up_write(&priv->mib_sem);
}
/* this will be executed outside of atomic context thanks to
* schedule_work(), thus we can as well use sleeping semaphore
* locking */
void
prism54_update_stats(islpci_private *priv)
{
char *data;
int j;
struct obj_bss bss, *bss2;
union oid_res_t r;
if (down_interruptible(&priv->stats_sem))
return;
/* missing stats are :
* iwstatistics.qual.updated
* iwstatistics.discard.nwid
* iwstatistics.discard.fragment
* iwstatistics.discard.misc
* iwstatistics.miss.beacon */
/* Noise floor.
* I'm not sure if the unit is dBm.
* Note : If we are not connected, this value seems to be irrevelant. */
mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
priv->local_iwstatistics.qual.noise = r.u;
/* Get the rssi of the link. To do this we need to retrieve a bss. */
/* First get the MAC address of the AP we are associated with. */
mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
data = r.ptr;
/* copy this MAC to the bss */
for (j = 0; j < 6; j++)
bss.address[j] = data[j];
kfree(data);
/* now ask for the corresponding bss */
j = mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r);
bss2 = r.ptr;
/* report the rssi and use it to calculate
* link quality through a signal-noise
* ratio */
priv->local_iwstatistics.qual.level = bss2->rssi;
priv->local_iwstatistics.qual.qual =
bss2->rssi - priv->iwstatistics.qual.noise;
kfree(bss2);
/* report that the stats are new */
priv->local_iwstatistics.qual.updated = 0x7;
/* Rx : unable to decrypt the MPDU */
mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r);
priv->local_iwstatistics.discard.code = r.u;
/* Tx : Max MAC retries num reached */
mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r);
priv->local_iwstatistics.discard.retries = r.u;
up(&priv->stats_sem);
return;
}
struct iw_statistics *
prism54_get_wireless_stats(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
/* If the stats are being updated return old data */
if (down_trylock(&priv->stats_sem) == 0) {
memcpy(&priv->iwstatistics, &priv->local_iwstatistics,
sizeof (struct iw_statistics));
/* They won't be marked updated for the next time */
priv->local_iwstatistics.qual.updated = 0;
up(&priv->stats_sem);
} else
priv->iwstatistics.qual.updated = 0;
/* Update our wireless stats, but do not schedule to often
* (max 1 HZ) */
if ((priv->stats_timestamp == 0) ||
time_after(jiffies, priv->stats_timestamp + 1 * HZ)) {
schedule_work(&priv->stats_work);
priv->stats_timestamp = jiffies;
}
return &priv->iwstatistics;
}
static int
prism54_commit(struct net_device *ndev, struct iw_request_info *info,
char *cwrq, char *extra)
{
islpci_private *priv = ndev->priv;
/* simply re-set the last set SSID, this should commit most stuff */
/* Commit in Monitor mode is not necessary, also setting essid
* in Monitor mode does not make sense and isn't allowed for this
* device's firmware */
if(priv->iw_mode != IW_MODE_MONITOR)
return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL);
return 0;
}
static int
prism54_get_name(struct net_device *ndev, struct iw_request_info *info,
char *cwrq, char *extra)
{
islpci_private *priv = ndev->priv;
char *capabilities;
union oid_res_t r;
int rvalue;
if (islpci_get_state(priv) < PRV_STATE_INIT) {
strncpy(cwrq, "NOT READY!", IFNAMSIZ);
return 0;
}
rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r);
switch (r.u) {
case INL_PHYCAP_5000MHZ:
capabilities = "IEEE 802.11a/b/g";
break;
case INL_PHYCAP_FAA:
capabilities = "IEEE 802.11b/g - FAA Support";
break;
case INL_PHYCAP_2400MHZ:
default:
capabilities = "IEEE 802.11b/g"; /* Default */
break;
}
strncpy(cwrq, capabilities, IFNAMSIZ);
return rvalue;
}
static int
prism54_set_freq(struct net_device *ndev, struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
islpci_private *priv = ndev->priv;
int rvalue;
u32 c = 0;
/* prepare the structure for the set object */
if (fwrq->m < 1000)
/* structure value contains a channel indication */
c = fwrq->m;
else {
/* structure contains a frequency indication and fwrq->e = 1 */
int f = fwrq->m / 100000;
if (fwrq->e != 1)
return -EINVAL;
if ((f >= 2412) && (f <= 2484)) {
while ((c < 14) && (f != frequency_list_bg[c]))
c++;
if (c >= 14)
return -EINVAL;
} else if ((f >= (int) 5170) && (f <= (int) 5320)) {
while ((c < 12) && (f != frequency_list_a[c]))
c++;
if (c >= 12)
return -EINVAL;
} else
return -EINVAL;
c++;
}
rvalue = mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c);
/* Call commit handler */
return (rvalue ? rvalue : -EINPROGRESS);
}
static int
prism54_get_freq(struct net_device *ndev, struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r);
fwrq->m = r.u;
fwrq->e = 0;
return rvalue;
}
static int
prism54_set_mode(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE;
/* Let's see if the user passed a valid Linux Wireless mode */
if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) {
printk(KERN_DEBUG
"%s: %s() You passed a non-valid init_mode.\n",
priv->ndev->name, __FUNCTION__);
return -EINVAL;
}
down_write(&priv->mib_sem);
if (prism54_mib_mode_helper(priv, *uwrq)) {
up_write(&priv->mib_sem);
return -EOPNOTSUPP;
}
/* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an
* extended one.
*/
if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN))
mlmeautolevel = DOT11_MLME_INTERMEDIATE;
if (priv->wpa)
mlmeautolevel = DOT11_MLME_EXTENDED;
mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
mgt_commit(priv);
priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR)
? ARPHRD_IEEE80211 : ARPHRD_ETHER;
up_write(&priv->mib_sem);
return 0;
}
/* Use mib cache */
static int
prism54_get_mode(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode >
IW_MODE_MONITOR));
*uwrq = priv->iw_mode;
return 0;
}
/* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to
* emit data if (sensitivity > rssi - noise) (in dBm).
* prism54_set_sens does not seem to work.
*/
static int
prism54_set_sens(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
u32 sens;
/* by default the card sets this to 20. */
sens = vwrq->disabled ? 20 : vwrq->value;
/* set the ed threshold. */
return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens);
}
static int
prism54_get_sens(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r);
vwrq->value = r.u;
vwrq->disabled = (vwrq->value == 0);
vwrq->fixed = 1;
return rvalue;
}
static int
prism54_get_range(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
struct iw_range *range = (struct iw_range *) extra;
islpci_private *priv = ndev->priv;
char *data;
int i, m, rvalue;
struct obj_frequencies *freq;
union oid_res_t r;
memset(range, 0, sizeof (struct iw_range));
dwrq->length = sizeof (struct iw_range);
/* set the wireless extension version number */
range->we_version_source = SUPPORTED_WIRELESS_EXT;
range->we_version_compiled = WIRELESS_EXT;
/* Now the encoding capabilities */
range->num_encoding_sizes = 3;
/* 64(40) bits WEP */
range->encoding_size[0] = 5;
/* 128(104) bits WEP */
range->encoding_size[1] = 13;
/* 256 bits for WPA-PSK */
range->encoding_size[2] = 32;
/* 4 keys are allowed */
range->max_encoding_tokens = 4;
/* we don't know the quality range... */
range->max_qual.level = 0;
range->max_qual.noise = 0;
range->max_qual.qual = 0;
/* these value describe an average quality. Needs more tweaking... */
range->avg_qual.level = -80; /* -80 dBm */
range->avg_qual.noise = 0; /* don't know what to put here */
range->avg_qual.qual = 0;
range->sensitivity = 200;
/* retry limit capabilities */
range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
range->retry_flags = IW_RETRY_LIMIT;
range->r_time_flags = IW_RETRY_LIFETIME;
/* I don't know the range. Put stupid things here */
range->min_retry = 1;
range->max_retry = 65535;
range->min_r_time = 1024;
range->max_r_time = 65535 * 1024;
/* txpower is supported in dBm's */
range->txpower_capa = IW_TXPOW_DBM;
if (islpci_get_state(priv) < PRV_STATE_INIT)
return 0;
/* Request the device for the supported frequencies
* not really revelant since some devices will report the 5 GHz band
* frequencies even if they don't support them.
*/
rvalue =
mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r);
freq = r.ptr;
range->num_channels = le16_to_cpu(freq->nr);
range->num_frequency = le16_to_cpu(freq->nr);
/* Frequencies are not listed in the right order. The reordering is probably
* firmware dependant and thus should work for everyone.
*/
m = min(IW_MAX_FREQUENCIES, (int) le16_to_cpu(freq->nr));
for (i = 0; i < m - 12; i++) {
range->freq[i].m = le16_to_cpu(freq->mhz[12 + i]);
range->freq[i].e = 6;
range->freq[i].i = i + 1;
}
for (i = m - 12; i < m; i++) {
range->freq[i].m = le16_to_cpu(freq->mhz[i - m + 12]);
range->freq[i].e = 6;
range->freq[i].i = i + 23;
}
kfree(freq);
rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r);
data = r.ptr;
/* We got an array of char. It is NULL terminated. */
i = 0;
while ((i < IW_MAX_BITRATES) && (*data != 0)) {
/* the result must be in bps. The card gives us 500Kbps */
range->bitrate[i] = (__s32) (*data >> 1);
range->bitrate[i] *= 1000000;
i++;
data++;
}
range->num_bitrates = i;
kfree(r.ptr);
return rvalue;
}
/* Set AP address*/
static int
prism54_set_wap(struct net_device *ndev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
islpci_private *priv = ndev->priv;
char bssid[6];
int rvalue;
if (awrq->sa_family != ARPHRD_ETHER)
return -EINVAL;
/* prepare the structure for the set object */
memcpy(&bssid[0], awrq->sa_data, 6);
/* set the bssid -- does this make sense when in AP mode? */
rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid);
return (rvalue ? rvalue : -EINPROGRESS); /* Call commit handler */
}
/* get AP address*/
static int
prism54_get_wap(struct net_device *ndev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
memcpy(awrq->sa_data, r.ptr, 6);
awrq->sa_family = ARPHRD_ETHER;
kfree(r.ptr);
return rvalue;
}
static int
prism54_set_scan(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
/* hehe the device does this automagicaly */
return 0;
}
/* a little helper that will translate our data into a card independent
* format that the Wireless Tools will understand. This was inspired by
* the "Aironet driver for 4500 and 4800 series cards" (GPL)
*/
inline char *
prism54_translate_bss(struct net_device *ndev, char *current_ev,
char *end_buf, struct obj_bss *bss, char noise)
{
struct iw_event iwe; /* Temporary buffer */
short cap;
islpci_private *priv = ndev->priv;
/* The first entry must be the MAC address */
memcpy(iwe.u.ap_addr.sa_data, bss->address, 6);
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
iwe.cmd = SIOCGIWAP;
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
/* The following entries will be displayed in the same order we give them */
/* The ESSID. */
iwe.u.data.length = bss->ssid.length;
iwe.u.data.flags = 1;
iwe.cmd = SIOCGIWESSID;
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, bss->ssid.octets);
/* Capabilities */
#define CAP_ESS 0x01
#define CAP_IBSS 0x02
#define CAP_CRYPT 0x10
/* Mode */
cap = le16_to_cpu(bss->capinfo);
iwe.u.mode = 0;
if (cap & CAP_ESS)
iwe.u.mode = IW_MODE_MASTER;
else if (cap & CAP_IBSS)
iwe.u.mode = IW_MODE_ADHOC;
iwe.cmd = SIOCGIWMODE;
if (iwe.u.mode)
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_UINT_LEN);
/* Encryption capability */
if (cap & CAP_CRYPT)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
iwe.cmd = SIOCGIWENCODE;
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL);
/* Add frequency. (short) bss->channel is the frequency in MHz */
iwe.u.freq.m = bss->channel;
iwe.u.freq.e = 6;
iwe.cmd = SIOCGIWFREQ;
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
/* Add quality statistics */
iwe.u.qual.level = bss->rssi;
iwe.u.qual.noise = noise;
/* do a simple SNR for quality */
iwe.u.qual.qual = bss->rssi - noise;
iwe.cmd = IWEVQUAL;
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
if (priv->wpa) {
u8 wpa_ie[MAX_WPA_IE_LEN];
char *buf, *p;
size_t wpa_ie_len;
int i;
wpa_ie_len = prism54_wpa_ie_get(priv, bss->address, wpa_ie);
if (wpa_ie_len > 0 &&
(buf = kmalloc(wpa_ie_len * 2 + 10, GFP_ATOMIC))) {
p = buf;
p += sprintf(p, "wpa_ie=");
for (i = 0; i < wpa_ie_len; i++) {
p += sprintf(p, "%02x", wpa_ie[i]);
}
memset(&iwe, 0, sizeof (iwe));
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, buf);
kfree(buf);
}
}
return current_ev;
}
int
prism54_get_scan(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
int i, rvalue;
struct obj_bsslist *bsslist;
u32 noise = 0;
char *current_ev = extra;
union oid_res_t r;
if (islpci_get_state(priv) < PRV_STATE_INIT) {
/* device is not ready, fail gently */
dwrq->length = 0;
return 0;
}
/* first get the noise value. We will use it to report the link quality */
rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
noise = r.u;
/* Ask the device for a list of known bss. We can report at most
* IW_MAX_AP=64 to the range struct. But the device won't repport anything
* if you change the value of MAXBSS=24. Anyway 24 AP It is probably enough.
*/
rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r);
bsslist = r.ptr;
/* ok now, scan the list and translate its info */
for (i = 0; i < min(IW_MAX_AP, (int) le32_to_cpu(bsslist->nr)); i++)
current_ev = prism54_translate_bss(ndev, current_ev,
extra + IW_SCAN_MAX_DATA,
&(bsslist->bsslist[i]),
noise);
kfree(bsslist);
dwrq->length = (current_ev - extra);
dwrq->flags = 0; /* todo */
return rvalue;
}
static int
prism54_set_essid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct obj_ssid essid;
memset(essid.octets, 0, 33);
/* Check if we were asked for `any' */
if (dwrq->flags && dwrq->length) {
if (dwrq->length > min(33, IW_ESSID_MAX_SIZE + 1))
return -E2BIG;
essid.length = dwrq->length - 1;
memcpy(essid.octets, extra, dwrq->length);
} else
essid.length = 0;
if (priv->iw_mode != IW_MODE_MONITOR)
return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid);
/* If in monitor mode, just save to mib */
mgt_set(priv, DOT11_OID_SSID, &essid);
return 0;
}
static int
prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct obj_ssid *essid;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r);
essid = r.ptr;
if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
/* if it is to big, trunk it */
dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length + 1);
} else {
dwrq->flags = 0;
dwrq->length = 0;
}
essid->octets[essid->length] = '\0';
memcpy(extra, essid->octets, dwrq->length);
kfree(essid);
return rvalue;
}
/* Provides no functionality, just completes the ioctl. In essence this is a
* just a cosmetic ioctl.
*/
static int
prism54_set_nick(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
if (dwrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG;
down_write(&priv->mib_sem);
memset(priv->nickname, 0, sizeof (priv->nickname));
memcpy(priv->nickname, extra, dwrq->length);
up_write(&priv->mib_sem);
return 0;
}
static int
prism54_get_nick(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
dwrq->length = 0;
down_read(&priv->mib_sem);
dwrq->length = strlen(priv->nickname) + 1;
memcpy(extra, priv->nickname, dwrq->length);
up_read(&priv->mib_sem);
return 0;
}
/* Set the allowed Bitrates */
static int
prism54_set_rate(struct net_device *ndev,
struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
u32 rate, profile;
char *data;
int ret, i;
union oid_res_t r;
if (vwrq->value == -1) {
/* auto mode. No limit. */
profile = 1;
return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
}
if((ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r)))
return ret;
rate = (u32) (vwrq->value / 500000);
data = r.ptr;
i = 0;
while(data[i]) {
if(rate && (data[i] == rate)) {
break;
}
if(vwrq->value == i) {
break;
}
data[i] |= 0x80;
i++;
}
if(!data[i]) {
return -EINVAL;
}
data[i] |= 0x80;
data[i + 1] = 0;
/* Now, check if we want a fixed or auto value */
if (vwrq->fixed) {
data[0] = data[i];
data[1] = 0;
}
/*
i = 0;
printk("prism54 rate: ");
while(data[i]) {
printk("%u ", data[i]);
i++;
}
printk("0\n");
*/
profile = -1;
ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data);
ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data);
kfree(r.ptr);
return ret;
}
/* Get the current bit rate */
static int
prism54_get_rate(struct net_device *ndev,
struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
int rvalue;
char *data;
union oid_res_t r;
/* Get the current bit rate */
if((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r)))
return rvalue;
vwrq->value = r.u * 500000;
/* request the device for the enabled rates */
if((rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r)))
return rvalue;
data = r.ptr;
vwrq->fixed = (data[0] != 0) && (data[1] == 0);
kfree(r.ptr);
return 0;
}
static int
prism54_set_rts(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value);
}
static int
prism54_get_rts(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
/* get the rts threshold */
rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r);
vwrq->value = r.u;
return rvalue;
}
static int
prism54_set_frag(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value);
}
static int
prism54_get_frag(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r);
vwrq->value = r.u;
return rvalue;
}
/* Here we have (min,max) = max retries for (small frames, big frames). Where
* big frame <=> bigger than the rts threshold
* small frame <=> smaller than the rts threshold
* This is not really the behavior expected by the wireless tool but it seems
* to be a common behavior in other drivers.
*
* It seems that playing with this tends to hang the card -> DISABLED
*/
static int
prism54_set_retry(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
u32 slimit = 0, llimit = 0; /* short and long limit */
u32 lifetime = 0;
int rvalue = 0;
if (vwrq->disabled)
/* we cannot disable this feature */
return -EINVAL;
if (vwrq->flags & IW_RETRY_LIMIT) {
if (vwrq->flags & IW_RETRY_MIN)
slimit = vwrq->value;
else if (vwrq->flags & IW_RETRY_MAX)
llimit = vwrq->value;
else {
/* we are asked to set both */
slimit = vwrq->value;
llimit = vwrq->value;
}
}
if (vwrq->flags & IW_RETRY_LIFETIME)
/* Wireless tools use us unit while the device uses 1024 us unit */
lifetime = vwrq->value / 1024;
/* now set what is requested */
if (slimit != 0)
rvalue =
mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit);
if (llimit != 0)
rvalue |=
mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit);
if (lifetime != 0)
rvalue |=
mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0,
&lifetime);
return rvalue;
}
static int
prism54_get_retry(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue = 0;
vwrq->disabled = 0; /* It cannot be disabled */
if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
/* we are asked for the life time */
rvalue =
mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r);
vwrq->value = r.u * 1024;
vwrq->flags = IW_RETRY_LIFETIME;
} else if ((vwrq->flags & IW_RETRY_MAX)) {
/* we are asked for the long retry limit */
rvalue |=
mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r);
vwrq->value = r.u;
vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
} else {
/* default. get the short retry limit */
rvalue |=
mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r);
vwrq->value = r.u;
vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
}
return rvalue;
}
static int
prism54_set_encode(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
int rvalue = 0, force = 0;
int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
union oid_res_t r;
/* with the new API, it's impossible to get a NULL pointer.
* New version of iwconfig set the IW_ENCODE_NOKEY flag
* when no key is given, but older versions don't. */
if (dwrq->length > 0) {
/* we have a key to set */
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
int current_index;
struct obj_key key = { DOT11_PRIV_WEP, 0, "" };
/* get the current key index */
rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
current_index = r.u;
/* Verify that the key is not marked as invalid */
if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
key.length = dwrq->length > sizeof (key.key) ?
sizeof (key.key) : dwrq->length;
memcpy(key.key, extra, key.length);
if (key.length == 32)
/* we want WPA-PSK */
key.type = DOT11_PRIV_TKIP;
if ((index < 0) || (index > 3))
/* no index provided use the current one */
index = current_index;
/* now send the key to the card */
rvalue |=
mgt_set_request(priv, DOT11_OID_DEFKEYX, index,
&key);
}
/*
* If a valid key is set, encryption should be enabled
* (user may turn it off later).
* This is also how "iwconfig ethX key on" works
*/
if ((index == current_index) && (key.length > 0))
force = 1;
} else {
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
if ((index >= 0) && (index <= 3)) {
/* we want to set the key index */
rvalue |=
mgt_set_request(priv, DOT11_OID_DEFKEYID, 0,
&index);
} else {
if (!dwrq->flags & IW_ENCODE_MODE) {
/* we cannot do anything. Complain. */
return -EINVAL;
}
}
}
/* now read the flags */
if (dwrq->flags & IW_ENCODE_DISABLED) {
/* Encoding disabled,
* authen = DOT11_AUTH_OS;
* invoke = 0;
* exunencrypt = 0; */
}
if (dwrq->flags & IW_ENCODE_OPEN)
/* Encode but accept non-encoded packets. No auth */
invoke = 1;
if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) {
/* Refuse non-encoded packets. Auth */
authen = DOT11_AUTH_BOTH;
invoke = 1;
exunencrypt = 1;
}
/* do the change if requested */
if ((dwrq->flags & IW_ENCODE_MODE) || force) {
rvalue |=
mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
rvalue |=
mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke);
rvalue |=
mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0,
&exunencrypt);
}
return rvalue;
}
static int
prism54_get_encode(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct obj_key *key;
u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
u32 authen = 0, invoke = 0, exunencrypt = 0;
int rvalue;
union oid_res_t r;
/* first get the flags */
rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
authen = r.u;
rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
invoke = r.u;
rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
exunencrypt = r.u;
if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt)
dwrq->flags = IW_ENCODE_RESTRICTED;
else if ((authen == DOT11_AUTH_OS) && !exunencrypt) {
if (invoke)
dwrq->flags = IW_ENCODE_OPEN;
else
dwrq->flags = IW_ENCODE_DISABLED;
} else
/* The card should not work in this state */
dwrq->flags = 0;
/* get the current device key index */
rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
devindex = r.u;
/* Now get the key, return it */
if ((index < 0) || (index > 3))
/* no index provided, use the current one */
index = devindex;
rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r);
key = r.ptr;
dwrq->length = key->length;
memcpy(extra, key->key, dwrq->length);
kfree(key);
/* return the used key index */
dwrq->flags |= devindex + 1;
return rvalue;
}
static int
prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
union oid_res_t r;
int rvalue;
rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r);
/* intersil firmware operates in 0.25 dBm (1/4 dBm) */
vwrq->value = (s32)r.u / 4;
vwrq->fixed = 1;
/* radio is not turned of
* btw: how is possible to turn off only the radio
*/
vwrq->disabled = 0;
return rvalue;
}
static int
prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
islpci_private *priv = ndev->priv;
s32 u = vwrq->value;
/* intersil firmware operates in 0.25 dBm (1/4) */
u *= 4;
if (vwrq->disabled) {
/* don't know how to disable radio */
printk(KERN_DEBUG
"%s: %s() disabling radio is not yet supported.\n",
priv->ndev->name, __FUNCTION__);
return -ENOTSUPP;
} else if (vwrq->fixed)
/* currently only fixed value is supported */
return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u);
else {
printk(KERN_DEBUG
"%s: %s() auto power will be implemented later.\n",
priv->ndev->name, __FUNCTION__);
return -ENOTSUPP;
}
}
static int
prism54_reset(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_reset(ndev->priv, 0);
return 0;
}
static int
prism54_set_beacon(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
int rvalue = mgt_set_request((islpci_private *) ndev->priv,
DOT11_OID_BEACONPERIOD, 0, uwrq);
return (rvalue ? rvalue : -EINPROGRESS);
}
static int
prism54_get_beacon(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
union oid_res_t r;
int rvalue;
rvalue =
mgt_get_request((islpci_private *) ndev->priv,
DOT11_OID_BEACONPERIOD, 0, NULL, &r);
*uwrq = r.u;
return rvalue;
}
void
prism54_acl_init(struct islpci_acl *acl)
{
sema_init(&acl->sem, 1);
INIT_LIST_HEAD(&acl->mac_list);
acl->size = 0;
acl->policy = MAC_POLICY_OPEN;
}
static void
prism54_clear_mac(struct islpci_acl *acl)
{
struct list_head *ptr, *next;
struct mac_entry *entry;
if (down_interruptible(&acl->sem))
return;
if (acl->size == 0) {
up(&acl->sem);
return;
}
for (ptr = acl->mac_list.next, next = ptr->next;
ptr != &acl->mac_list; ptr = next, next = ptr->next) {
entry = list_entry(ptr, struct mac_entry, _list);
list_del(ptr);
kfree(entry);
}
acl->size = 0;
up(&acl->sem);
}
void
prism54_acl_clean(struct islpci_acl *acl)
{
prism54_clear_mac(acl);
}
static int
prism54_add_mac(struct net_device *ndev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_acl *acl = &priv->acl;
struct mac_entry *entry;
struct sockaddr *addr = (struct sockaddr *) extra;
if (addr->sa_family != ARPHRD_ETHER)
return -EOPNOTSUPP;
entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL);
if (entry == NULL)
return -ENOMEM;
memcpy(entry->addr, addr->sa_data, ETH_ALEN);
if (down_interruptible(&acl->sem)) {
kfree(entry);
return -ERESTARTSYS;
}
list_add_tail(&entry->_list, &acl->mac_list);
acl->size++;
up(&acl->sem);
return 0;
}
static int
prism54_del_mac(struct net_device *ndev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_acl *acl = &priv->acl;
struct mac_entry *entry;
struct list_head *ptr;
struct sockaddr *addr = (struct sockaddr *) extra;
if (addr->sa_family != ARPHRD_ETHER)
return -EOPNOTSUPP;
if (down_interruptible(&acl->sem))
return -ERESTARTSYS;
for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
entry = list_entry(ptr, struct mac_entry, _list);
if (memcmp(entry->addr, addr->sa_data, ETH_ALEN) == 0) {
list_del(ptr);
acl->size--;
kfree(entry);
up(&acl->sem);
return 0;
}
}
up(&acl->sem);
return -EINVAL;
}
static int
prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_acl *acl = &priv->acl;
struct mac_entry *entry;
struct list_head *ptr;
struct sockaddr *dst = (struct sockaddr *) extra;
dwrq->length = 0;
if (down_interruptible(&acl->sem))
return -ERESTARTSYS;
for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
entry = list_entry(ptr, struct mac_entry, _list);
memcpy(dst->sa_data, entry->addr, ETH_ALEN);
dst->sa_family = ARPHRD_ETHER;
dwrq->length++;
dst++;
}
up(&acl->sem);
return 0;
}
/* Setting policy also clears the MAC acl, even if we don't change the defaut
* policy
*/
static int
prism54_set_policy(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_acl *acl = &priv->acl;
u32 mlmeautolevel;
prism54_clear_mac(acl);
if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT))
return -EINVAL;
down_write(&priv->mib_sem);
acl->policy = *uwrq;
/* the ACL code needs an intermediate mlmeautolevel */
if ((priv->iw_mode == IW_MODE_MASTER) &&
(acl->policy != MAC_POLICY_OPEN))
mlmeautolevel = DOT11_MLME_INTERMEDIATE;
else
mlmeautolevel = CARD_DEFAULT_MLME_MODE;
if (priv->wpa)
mlmeautolevel = DOT11_MLME_EXTENDED;
mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
/* restart the card with our new policy */
mgt_commit(priv);
up_write(&priv->mib_sem);
return 0;
}
static int
prism54_get_policy(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_acl *acl = &priv->acl;
*uwrq = acl->policy;
return 0;
}
/* Return 1 only if client should be accepted. */
static int
prism54_mac_accept(struct islpci_acl *acl, char *mac)
{
struct list_head *ptr;
struct mac_entry *entry;
int res = 0;
if (down_interruptible(&acl->sem))
return -ERESTARTSYS;
if (acl->policy == MAC_POLICY_OPEN) {
up(&acl->sem);
return 1;
}
for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
entry = list_entry(ptr, struct mac_entry, _list);
if (memcmp(entry->addr, mac, ETH_ALEN) == 0) {
res = 1;
break;
}
}
res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res;
up(&acl->sem);
return res;
}
static int
prism54_kick_all(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
struct obj_mlme *mlme;
int rvalue;
mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
if (mlme == NULL)
return -ENOMEM;
/* Tell the card to kick every client */
mlme->id = cpu_to_le16(0);
rvalue = mgt_set_request(ndev->priv, DOT11_OID_DISASSOCIATE, 0, mlme);
kfree(mlme);
return rvalue;
}
static int
prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
struct obj_mlme *mlme;
struct sockaddr *addr = (struct sockaddr *) extra;
int rvalue;
if (addr->sa_family != ARPHRD_ETHER)
return -EOPNOTSUPP;
mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
if (mlme == NULL)
return -ENOMEM;
/* Tell the card to only kick the corresponding bastard */
memcpy(mlme->address, addr->sa_data, ETH_ALEN);
mlme->id = cpu_to_le16(-1);
rvalue = mgt_set_request(ndev->priv, DOT11_OID_DISASSOCIATE, 0, mlme);
kfree(mlme);
return rvalue;
}
/* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */
static inline void
format_event(islpci_private *priv, char *dest, const char *str,
const struct obj_mlme *mlme, u16 *length, int error)
{
const u8 *a = mlme->address;
int n = snprintf(dest, IW_CUSTOM_MAX,
"%s %s %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X %s",
str,
((priv->iw_mode == IW_MODE_MASTER) ? "to" : "from"),
a[0], a[1], a[2], a[3], a[4], a[5],
(error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ")
: ""));
BUG_ON(n > IW_CUSTOM_MAX);
*length = n;
}
static void
send_formatted_event(islpci_private *priv, const char *str,
const struct obj_mlme *mlme, int error)
{
union iwreq_data wrqu;
wrqu.data.pointer = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
if (!wrqu.data.pointer)
return;
wrqu.data.length = 0;
format_event(priv, wrqu.data.pointer, str, mlme, &wrqu.data.length,
error);
wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, wrqu.data.pointer);
kfree(wrqu.data.pointer);
}
static void
send_simple_event(islpci_private *priv, const char *str)
{
union iwreq_data wrqu;
int n = strlen(str);
wrqu.data.pointer = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
if (!wrqu.data.pointer)
return;
BUG_ON(n > IW_CUSTOM_MAX);
wrqu.data.length = n;
strcpy(wrqu.data.pointer, str);
wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, wrqu.data.pointer);
kfree(wrqu.data.pointer);
}
static void
link_changed(struct net_device *ndev, u32 bitrate)
{
islpci_private *priv = ndev->priv;
if (le32_to_cpu(bitrate)) {
if (priv->iw_mode == IW_MODE_INFRA) {
union iwreq_data uwrq;
prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq,
NULL);
wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL);
} else
send_simple_event(ndev->priv, "Link established");
} else
send_simple_event(ndev->priv, "Link lost");
}
/* Beacon/ProbeResp payload header */
struct ieee80211_beacon_phdr {
u8 timestamp[8];
u16 beacon_int;
u16 capab_info;
} __attribute__ ((packed));
#define WLAN_EID_GENERIC 0xdd
static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 };
#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
void
prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
u8 *wpa_ie, size_t wpa_ie_len)
{
struct list_head *ptr;
struct islpci_bss_wpa_ie *bss = NULL;
if (wpa_ie_len > MAX_WPA_IE_LEN)
wpa_ie_len = MAX_WPA_IE_LEN;
if (down_interruptible(&priv->wpa_sem))
return;
/* try to use existing entry */
list_for_each(ptr, &priv->bss_wpa_list) {
bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) {
list_move(&bss->list, &priv->bss_wpa_list);
break;
}
bss = NULL;
}
if (bss == NULL) {
/* add a new BSS entry; if max number of entries is already
* reached, replace the least recently updated */
if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) {
bss = list_entry(priv->bss_wpa_list.prev,
struct islpci_bss_wpa_ie, list);
list_del(&bss->list);
} else {
bss = kmalloc(sizeof (*bss), GFP_ATOMIC);
if (bss != NULL) {
priv->num_bss_wpa++;
memset(bss, 0, sizeof (*bss));
}
}
if (bss != NULL) {
memcpy(bss->bssid, bssid, ETH_ALEN);
list_add(&bss->list, &priv->bss_wpa_list);
}
}
if (bss != NULL) {
memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len);
bss->wpa_ie_len = wpa_ie_len;
bss->last_update = jiffies;
} else {
printk(KERN_DEBUG "Failed to add BSS WPA entry for " MACSTR
"\n", MAC2STR(bssid));
}
/* expire old entries from WPA list */
while (priv->num_bss_wpa > 0) {
bss = list_entry(priv->bss_wpa_list.prev,
struct islpci_bss_wpa_ie, list);
if (!time_after(jiffies, bss->last_update + 60 * HZ))
break;
list_del(&bss->list);
priv->num_bss_wpa--;
kfree(bss);
}
up(&priv->wpa_sem);
}
size_t
prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie)
{
struct list_head *ptr;
struct islpci_bss_wpa_ie *bss = NULL;
size_t len = 0;
if (down_interruptible(&priv->wpa_sem))
return 0;
list_for_each(ptr, &priv->bss_wpa_list) {
bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0)
break;
bss = NULL;
}
if (bss) {
len = bss->wpa_ie_len;
memcpy(wpa_ie, bss->wpa_ie, len);
}
up(&priv->wpa_sem);
return len;
}
void
prism54_wpa_ie_init(islpci_private *priv)
{
INIT_LIST_HEAD(&priv->bss_wpa_list);
sema_init(&priv->wpa_sem, 1);
}
void
prism54_wpa_ie_clean(islpci_private *priv)
{
struct list_head *ptr, *n;
list_for_each_safe(ptr, n, &priv->bss_wpa_list) {
struct islpci_bss_wpa_ie *bss;
bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
kfree(bss);
}
}
static void
prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr,
u8 *payload, size_t len)
{
struct ieee80211_beacon_phdr *hdr;
u8 *pos, *end;
if (!priv->wpa)
return;
hdr = (struct ieee80211_beacon_phdr *) payload;
pos = (u8 *) (hdr + 1);
end = payload + len;
while (pos < end) {
if (pos + 2 + pos[1] > end) {
printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed "
"for " MACSTR "\n", MAC2STR(addr));
return;
}
if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 &&
memcmp(pos + 2, wpa_oid, 4) == 0) {
prism54_wpa_ie_add(priv, addr, pos, pos[1] + 2);
return;
}
pos += 2 + pos[1];
}
}
static void
handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid)
{
if (((le16_to_cpu(mlme->state) == DOT11_STATE_AUTHING) ||
(le16_to_cpu(mlme->state) == DOT11_STATE_ASSOCING))
&& mgt_mlme_answer(priv)) {
/* Someone is requesting auth and we must respond. Just send back
* the trap with error code set accordingly.
*/
mlme->code = cpu_to_le16(prism54_mac_accept(&priv->acl,
mlme->
address) ? 0 : 1);
mgt_set_request(priv, oid, 0, mlme);
}
}
int
prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
char *data)
{
struct obj_mlme *mlme = (struct obj_mlme *) data;
size_t len;
u8 *payload, *pos = (u8 *) (mlme + 1);
len = pos[0] | (pos[1] << 8); /* little endian data length */
payload = pos + 2;
/* I think all trapable objects are listed here.
* Some oids have a EX version. The difference is that they are emitted
* in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL)
* with more info.
* The few events already defined by the wireless tools are not really
* suited. We use the more flexible custom event facility.
*/
switch (oid) {
case GEN_OID_LINKSTATE:
link_changed(priv->ndev, (u32) *data);
break;
case DOT11_OID_MICFAILURE:
send_simple_event(priv, "Mic failure");
break;
case DOT11_OID_DEAUTHENTICATE:
send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
break;
case DOT11_OID_AUTHENTICATE:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "Authenticate request", mlme, 1);
break;
case DOT11_OID_DISASSOCIATE:
send_formatted_event(priv, "Disassociate request", mlme, 0);
break;
case DOT11_OID_ASSOCIATE:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "Associate request", mlme, 1);
break;
case DOT11_OID_REASSOCIATE:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "ReAssociate request", mlme, 1);
break;
case DOT11_OID_BEACON:
prism54_process_bss_data(priv, oid, mlme->address,
payload, len);
send_formatted_event(priv,
"Received a beacon from an unkown AP",
mlme, 0);
break;
case DOT11_OID_PROBE:
/* we received a probe from a client. */
prism54_process_bss_data(priv, oid, mlme->address,
payload, len);
send_formatted_event(priv, "Received a probe from client", mlme,
0);
break;
/* Note : the following should never happen since we don't run the card in
* extended mode.
* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this
* is backward compatible layout-wise with "struct obj_mlme".
*/
case DOT11_OID_DEAUTHENTICATEEX:
send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
break;
case DOT11_OID_AUTHENTICATEEX:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "Authenticate request", mlme, 1);
break;
case DOT11_OID_DISASSOCIATEEX:
send_formatted_event(priv, "Disassociate request", mlme, 0);
break;
case DOT11_OID_ASSOCIATEEX:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "Associate request", mlme, 1);
break;
case DOT11_OID_REASSOCIATEEX:
handle_request(priv, mlme, oid);
send_formatted_event(priv, "Reassociate request", mlme, 1);
break;
default:
return -EINVAL;
}
return 0;
}
/*
* Process a device trap. This is called via schedule_work(), outside of
* interrupt context, no locks held.
*/
void
prism54_process_trap(void *data)
{
struct islpci_mgmtframe *frame = data;
enum oid_num_t n = mgt_oidtonum(frame->header->oid);
prism54_process_trap_helper(frame->ndev->priv, n, frame->data);
islpci_mgt_release(frame);
}
int
prism54_set_mac_address(struct net_device *ndev, void *addr)
{
islpci_private *priv = ndev->priv;
int ret;
if (ndev->addr_len != 6)
return -EINVAL;
ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0,
&((struct sockaddr *) addr)->sa_data);
if (!ret)
memcpy(priv->ndev->dev_addr,
&((struct sockaddr *) addr)->sa_data, 6);
return ret;
}
int
prism54_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
/* should we really support this old stuff ? */
return -EOPNOTSUPP;
}
int
prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
down_write(&priv->mib_sem);
priv->wpa = *uwrq;
if (priv->wpa) {
u32 l = DOT11_MLME_EXTENDED;
mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &l);
}
/* restart the card with new level. Needed ? */
mgt_commit(priv);
up_write(&priv->mib_sem);
return 0;
}
int
prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
*uwrq = priv->wpa;
return 0;
}
int
prism54_oid(struct net_device *ndev, struct iw_request_info *info,
__u32 *uwrq, char *extra)
{
islpci_private *priv = ndev->priv;
priv->priv_oid = *uwrq;
printk("%s: oid 0x%08X\n", ndev->name, *uwrq);
return 0;
}
int
prism54_get_oid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *data, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_mgmtframe *response = NULL;
int ret = -EIO, response_op = PIMFOR_OP_ERROR;
printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid);
data->length = 0;
if (islpci_get_state(priv) >= PRV_STATE_INIT) {
ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, priv->priv_oid, extra, 256, &response);
response_op = response->header->operation;
printk("%s: ret: %i\n", ndev->name, ret);
printk("%s: response_op: %i\n", ndev->name, response_op);
if (ret || !response || response->header->operation == PIMFOR_OP_ERROR) {
if (response) {
islpci_mgt_release(response);
}
printk("%s: EIO\n", ndev->name);
ret = -EIO;
}
if (!ret) {
data->length = response->header->length;
memcpy(extra, response->data, data->length);
islpci_mgt_release(response);
printk("%s: len: %i\n", ndev->name, data->length);
}
}
return ret;
}
int
prism54_set_oid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *data, char *extra)
{
islpci_private *priv = ndev->priv;
struct islpci_mgmtframe *response = NULL;
int ret = 0, response_op = PIMFOR_OP_ERROR;
printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid, data->length);
if (islpci_get_state(priv) >= PRV_STATE_INIT) {
ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, priv->priv_oid, extra, data->length, &response);
printk("%s: ret: %i\n", ndev->name, ret);
if (!ret) {
response_op = response->header->operation;
printk("%s: response_op: %i\n", ndev->name, response_op);
islpci_mgt_release(response);
}
if (ret || response_op == PIMFOR_OP_ERROR) {
printk("%s: EIO\n", ndev->name);
ret = -EIO;
}
}
return ret;
}
static const iw_handler prism54_handler[] = {
(iw_handler) prism54_commit, /* SIOCSIWCOMMIT */
(iw_handler) prism54_get_name, /* SIOCGIWNAME */
(iw_handler) NULL, /* SIOCSIWNWID */
(iw_handler) NULL, /* SIOCGIWNWID */
(iw_handler) prism54_set_freq, /* SIOCSIWFREQ */
(iw_handler) prism54_get_freq, /* SIOCGIWFREQ */
(iw_handler) prism54_set_mode, /* SIOCSIWMODE */
(iw_handler) prism54_get_mode, /* SIOCGIWMODE */
(iw_handler) prism54_set_sens, /* SIOCSIWSENS */
(iw_handler) prism54_get_sens, /* SIOCGIWSENS */
(iw_handler) NULL, /* SIOCSIWRANGE */
(iw_handler) prism54_get_range, /* SIOCGIWRANGE */
(iw_handler) NULL, /* SIOCSIWPRIV */
(iw_handler) NULL, /* SIOCGIWPRIV */
(iw_handler) NULL, /* SIOCSIWSTATS */
(iw_handler) NULL, /* SIOCGIWSTATS */
iw_handler_set_spy, /* SIOCSIWSPY */
iw_handler_get_spy, /* SIOCGIWSPY */
iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
(iw_handler) prism54_set_wap, /* SIOCSIWAP */
(iw_handler) prism54_get_wap, /* SIOCGIWAP */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* SIOCGIWAPLIST depreciated */
(iw_handler) prism54_set_scan, /* SIOCSIWSCAN */
(iw_handler) prism54_get_scan, /* SIOCGIWSCAN */
(iw_handler) prism54_set_essid, /* SIOCSIWESSID */
(iw_handler) prism54_get_essid, /* SIOCGIWESSID */
(iw_handler) prism54_set_nick, /* SIOCSIWNICKN */
(iw_handler) prism54_get_nick, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) prism54_set_rate, /* SIOCSIWRATE */
(iw_handler) prism54_get_rate, /* SIOCGIWRATE */
(iw_handler) prism54_set_rts, /* SIOCSIWRTS */
(iw_handler) prism54_get_rts, /* SIOCGIWRTS */
(iw_handler) prism54_set_frag, /* SIOCSIWFRAG */
(iw_handler) prism54_get_frag, /* SIOCGIWFRAG */
(iw_handler) prism54_set_txpower, /* SIOCSIWTXPOW */
(iw_handler) prism54_get_txpower, /* SIOCGIWTXPOW */
(iw_handler) prism54_set_retry, /* SIOCSIWRETRY */
(iw_handler) prism54_get_retry, /* SIOCGIWRETRY */
(iw_handler) prism54_set_encode, /* SIOCSIWENCODE */
(iw_handler) prism54_get_encode, /* SIOCGIWENCODE */
(iw_handler) NULL, /* SIOCSIWPOWER */
(iw_handler) NULL, /* SIOCGIWPOWER */
};
/* The low order bit identify a SET (0) or a GET (1) ioctl. */
#define PRISM54_RESET SIOCIWFIRSTPRIV
#define PRISM54_GET_BEACON SIOCIWFIRSTPRIV+1
#define PRISM54_SET_BEACON SIOCIWFIRSTPRIV+2
#define PRISM54_GET_POLICY SIOCIWFIRSTPRIV+3
#define PRISM54_SET_POLICY SIOCIWFIRSTPRIV+4
#define PRISM54_GET_MAC SIOCIWFIRSTPRIV+5
#define PRISM54_ADD_MAC SIOCIWFIRSTPRIV+6
#define PRISM54_DEL_MAC SIOCIWFIRSTPRIV+8
#define PRISM54_KICK_MAC SIOCIWFIRSTPRIV+10
#define PRISM54_KICK_ALL SIOCIWFIRSTPRIV+12
#define PRISM54_GET_WPA SIOCIWFIRSTPRIV+13
#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+14
#define PRISM54_OID SIOCIWFIRSTPRIV+16
#define PRISM54_GET_OID SIOCIWFIRSTPRIV+17
#define PRISM54_SET_OID SIOCIWFIRSTPRIV+18
static const struct iw_priv_args prism54_private_args[] = {
/*{ cmd, set_args, get_args, name } */
{PRISM54_RESET, 0, 0, "reset"},
{PRISM54_GET_BEACON, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getBeaconPeriod"},
{PRISM54_SET_BEACON, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
"setBeaconPeriod"},
{PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getPolicy"},
{PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
"setPolicy"},
{PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"},
{PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
"addMac"},
{PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
"delMac"},
{PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
"kickMac"},
{PRISM54_KICK_ALL, 0, 0, "kickAll"},
{PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"get_wpa"},
{PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
"set_wpa"},
{PRISM54_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oid"},
{PRISM54_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "get_oid"},
{PRISM54_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "set_oid"},
};
static const iw_handler prism54_private_handler[] = {
(iw_handler) prism54_reset,
(iw_handler) prism54_get_beacon,
(iw_handler) prism54_set_beacon,
(iw_handler) prism54_get_policy,
(iw_handler) prism54_set_policy,
(iw_handler) prism54_get_mac,
(iw_handler) prism54_add_mac,
(iw_handler) NULL,
(iw_handler) prism54_del_mac,
(iw_handler) NULL,
(iw_handler) prism54_kick_mac,
(iw_handler) NULL,
(iw_handler) prism54_kick_all,
(iw_handler) prism54_get_wpa,
(iw_handler) prism54_set_wpa,
(iw_handler) NULL,
(iw_handler) prism54_oid,
(iw_handler) prism54_get_oid,
(iw_handler) prism54_set_oid,
};
const struct iw_handler_def prism54_handler_def = {
.num_standard = sizeof (prism54_handler) / sizeof (iw_handler),
.num_private = sizeof (prism54_private_handler) / sizeof (iw_handler),
.num_private_args =
sizeof (prism54_private_args) / sizeof (struct iw_priv_args),
.standard = (iw_handler *) prism54_handler,
.private = (iw_handler *) prism54_private_handler,
.private_args = (struct iw_priv_args *) prism54_private_args,
};
drivers/net/wireless/prism54/isl_ioctl.h 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/isl_ioctl.h,v 1.30 2004/01/30 16:24:00 ajfa Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* (C) 2003 Aurelien Alleaume <slts@free.fr>
* (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISL_IOCTL_H
#define _ISL_IOCTL_H
#include "islpci_mgt.h"
#include "islpci_dev.h"
#include <net/iw_handler.h> /* New driver API */
#define SUPPORTED_WIRELESS_EXT 16
void prism54_mib_init(islpci_private *);
void prism54_mib_init_work(islpci_private *);
struct iw_statistics *prism54_get_wireless_stats(struct net_device *);
void prism54_update_stats(islpci_private *);
void prism54_acl_init(struct islpci_acl *);
void prism54_acl_clean(struct islpci_acl *);
void prism54_process_trap(void *);
void prism54_wpa_ie_init(islpci_private *priv);
void prism54_wpa_ie_clean(islpci_private *priv);
void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
u8 *wpa_ie, size_t wpa_ie_len);
size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
int prism54_set_mac_address(struct net_device *, void *);
int prism54_ioctl(struct net_device *, struct ifreq *, int);
extern const struct iw_handler_def prism54_handler_def;
#endif /* _ISL_IOCTL_H */
drivers/net/wireless/prism54/isl_oid.h 0 → 100644
View file @ 17e2ec07
/*
* $Id: isl_oid.h,v 1.2 2004/01/30 16:24:00 ajfa Exp $
*
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#if !defined(_ISL_OID_H)
#define _ISL_OID_H
/*
* MIB related constant and structure definitions for communicating
* with the device firmware
*/
struct obj_ssid {
u8 length;
char octets[33];
} __attribute__ ((packed));
struct obj_key {
u8 type; /* dot11_priv_t */
u8 length;
char key[32];
} __attribute__ ((packed));
struct obj_mlme {
u8 address[6];
u16 id;
u16 state;
u16 code;
} __attribute__ ((packed));
struct obj_mlmeex {
u8 address[6];
u16 id;
u16 state;
u16 code;
u16 size;
u8 data[0];
} __attribute__ ((packed));
struct obj_buffer {
u32 size;
u32 addr; /* 32bit bus address */
} __attribute__ ((packed));
struct obj_bss {
u8 address[6];
int:16; /* padding */
char state;
char reserved;
short age;
char quality;
char rssi;
struct obj_ssid ssid;
short channel;
char beacon_period;
char dtim_period;
short capinfo;
short rates;
short basic_rates;
int:16; /* padding */
} __attribute__ ((packed));
struct obj_bsslist {
u32 nr;
struct obj_bss bsslist[0];
} __attribute__ ((packed));
struct obj_frequencies {
u16 nr;
u16 mhz[0];
} __attribute__ ((packed));
/*
* in case everything's ok, the inlined function below will be
* optimized away by the compiler...
*/
static inline void
__bug_on_wrong_struct_sizes(void)
{
BUG_ON(sizeof (struct obj_ssid) != 34);
BUG_ON(sizeof (struct obj_key) != 34);
BUG_ON(sizeof (struct obj_mlme) != 12);
BUG_ON(sizeof (struct obj_mlmeex) != 14);
BUG_ON(sizeof (struct obj_buffer) != 8);
BUG_ON(sizeof (struct obj_bss) != 60);
BUG_ON(sizeof (struct obj_bsslist) != 4);
BUG_ON(sizeof (struct obj_frequencies) != 2);
}
enum dot11_state_t {
DOT11_STATE_NONE = 0,
DOT11_STATE_AUTHING = 1,
DOT11_STATE_AUTH = 2,
DOT11_STATE_ASSOCING = 3,
DOT11_STATE_ASSOC = 5,
DOT11_STATE_IBSS = 6,
DOT11_STATE_WDS = 7
};
enum dot11_bsstype_t {
DOT11_BSSTYPE_NONE = 0,
DOT11_BSSTYPE_INFRA = 1,
DOT11_BSSTYPE_IBSS = 2,
DOT11_BSSTYPE_ANY = 3
};
enum dot11_auth_t {
DOT11_AUTH_NONE = 0,
DOT11_AUTH_OS = 1,
DOT11_AUTH_SK = 2,
DOT11_AUTH_BOTH = 3
};
enum dot11_mlme_t {
DOT11_MLME_AUTO = 0,
DOT11_MLME_INTERMEDIATE = 1,
DOT11_MLME_EXTENDED = 2
};
enum dot11_priv_t {
DOT11_PRIV_WEP = 0,
DOT11_PRIV_TKIP = 1
};
/* The dot11d conformance level configures the 802.11d conformance levels.
* The following conformance levels exist:*/
enum oid_inl_conformance_t {
OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */
OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */
OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to
* determine channel AND/OR just make
* assumption that active
* channels are valid channels */
};
enum oid_inl_mode_t {
INL_MODE_NONE = -1,
INL_MODE_PROMISCUOUS = 0,
INL_MODE_CLIENT = 1,
INL_MODE_AP = 2,
INL_MODE_SNIFFER = 3
};
enum oid_inl_config_t {
INL_CONFIG_NOTHING = 0x00,
INL_CONFIG_MANUALRUN = 0x01,
INL_CONFIG_FRAMETRAP = 0x02,
INL_CONFIG_RXANNEX = 0x04,
INL_CONFIG_TXANNEX = 0x08,
INL_CONFIG_WDS = 0x10
};
enum oid_inl_phycap_t {
INL_PHYCAP_2400MHZ = 1,
INL_PHYCAP_5000MHZ = 2,
INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */
};
enum oid_num_t {
GEN_OID_MACADDRESS = 0,
GEN_OID_LINKSTATE,
GEN_OID_WATCHDOG,
GEN_OID_MIBOP,
GEN_OID_OPTIONS,
GEN_OID_LEDCONFIG,
/* 802.11 */
DOT11_OID_BSSTYPE,
DOT11_OID_BSSID,
DOT11_OID_SSID,
DOT11_OID_STATE,
DOT11_OID_AID,
DOT11_OID_COUNTRYSTRING,
DOT11_OID_SSIDOVERRIDE,
DOT11_OID_MEDIUMLIMIT,
DOT11_OID_BEACONPERIOD,
DOT11_OID_DTIMPERIOD,
DOT11_OID_ATIMWINDOW,
DOT11_OID_LISTENINTERVAL,
DOT11_OID_CFPPERIOD,
DOT11_OID_CFPDURATION,
DOT11_OID_AUTHENABLE,
DOT11_OID_PRIVACYINVOKED,
DOT11_OID_EXUNENCRYPTED,
DOT11_OID_DEFKEYID,
DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
DOT11_OID_STAKEY,
DOT11_OID_REKEYTHRESHOLD,
DOT11_OID_STASC,
DOT11_OID_PRIVTXREJECTED,
DOT11_OID_PRIVRXPLAIN,
DOT11_OID_PRIVRXFAILED,
DOT11_OID_PRIVRXNOKEY,
DOT11_OID_RTSTHRESH,
DOT11_OID_FRAGTHRESH,
DOT11_OID_SHORTRETRIES,
DOT11_OID_LONGRETRIES,
DOT11_OID_MAXTXLIFETIME,
DOT11_OID_MAXRXLIFETIME,
DOT11_OID_AUTHRESPTIMEOUT,
DOT11_OID_ASSOCRESPTIMEOUT,
DOT11_OID_ALOFT_TABLE,
DOT11_OID_ALOFT_CTRL_TABLE,
DOT11_OID_ALOFT_RETREAT,
DOT11_OID_ALOFT_PROGRESS,
DOT11_OID_ALOFT_FIXEDRATE,
DOT11_OID_ALOFT_RSSIGRAPH,
DOT11_OID_ALOFT_CONFIG,
DOT11_OID_VDCFX,
DOT11_OID_MAXFRAMEBURST,
DOT11_OID_PSM,
DOT11_OID_CAMTIMEOUT,
DOT11_OID_RECEIVEDTIMS,
DOT11_OID_ROAMPREFERENCE,
DOT11_OID_BRIDGELOCAL,
DOT11_OID_CLIENTS,
DOT11_OID_CLIENTSASSOCIATED,
DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
DOT11_OID_CLIENTFIND,
DOT11_OID_WDSLINKADD,
DOT11_OID_WDSLINKREMOVE,
DOT11_OID_EAPAUTHSTA,
DOT11_OID_EAPUNAUTHSTA,
DOT11_OID_DOT1XENABLE,
DOT11_OID_MICFAILURE,
DOT11_OID_REKEYINDICATE,
DOT11_OID_MPDUTXSUCCESSFUL,
DOT11_OID_MPDUTXONERETRY,
DOT11_OID_MPDUTXMULTIPLERETRIES,
DOT11_OID_MPDUTXFAILED,
DOT11_OID_MPDURXSUCCESSFUL,
DOT11_OID_MPDURXDUPS,
DOT11_OID_RTSSUCCESSFUL,
DOT11_OID_RTSFAILED,
DOT11_OID_ACKFAILED,
DOT11_OID_FRAMERECEIVES,
DOT11_OID_FRAMEERRORS,
DOT11_OID_FRAMEABORTS,
DOT11_OID_FRAMEABORTSPHY,
DOT11_OID_SLOTTIME,
DOT11_OID_CWMIN,
DOT11_OID_CWMAX,
DOT11_OID_ACKWINDOW,
DOT11_OID_ANTENNARX,
DOT11_OID_ANTENNATX,
DOT11_OID_ANTENNADIVERSITY,
DOT11_OID_CHANNEL,
DOT11_OID_EDTHRESHOLD,
DOT11_OID_PREAMBLESETTINGS,
DOT11_OID_RATES,
DOT11_OID_CCAMODESUPPORTED,
DOT11_OID_CCAMODE,
DOT11_OID_RSSIVECTOR,
DOT11_OID_OUTPUTPOWERTABLE,
DOT11_OID_OUTPUTPOWER,
DOT11_OID_SUPPORTEDRATES,
DOT11_OID_FREQUENCY,
DOT11_OID_SUPPORTEDFREQUENCIES,
DOT11_OID_NOISEFLOOR,
DOT11_OID_FREQUENCYACTIVITY,
DOT11_OID_IQCALIBRATIONTABLE,
DOT11_OID_NONERPPROTECTION,
DOT11_OID_SLOTSETTINGS,
DOT11_OID_NONERPTIMEOUT,
DOT11_OID_PROFILES,
DOT11_OID_EXTENDEDRATES,
DOT11_OID_DEAUTHENTICATE,
DOT11_OID_AUTHENTICATE,
DOT11_OID_DISASSOCIATE,
DOT11_OID_ASSOCIATE,
DOT11_OID_SCAN,
DOT11_OID_BEACON,
DOT11_OID_PROBE,
DOT11_OID_DEAUTHENTICATEEX,
DOT11_OID_AUTHENTICATEEX,
DOT11_OID_DISASSOCIATEEX,
DOT11_OID_ASSOCIATEEX,
DOT11_OID_REASSOCIATE,
DOT11_OID_REASSOCIATEEX,
DOT11_OID_NONERPSTATUS,
DOT11_OID_STATIMEOUT,
DOT11_OID_MLMEAUTOLEVEL,
DOT11_OID_BSSTIMEOUT,
DOT11_OID_ATTACHMENT,
DOT11_OID_PSMBUFFER,
DOT11_OID_BSSS,
DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
DOT11_OID_BSSFIND,
DOT11_OID_BSSLIST,
OID_INL_TUNNEL,
OID_INL_MEMADDR,
OID_INL_MEMORY,
OID_INL_MODE,
OID_INL_COMPONENT_NR,
OID_INL_VERSION,
OID_INL_INTERFACE_ID,
OID_INL_COMPONENT_ID,
OID_INL_CONFIG,
OID_INL_DOT11D_CONFORMANCE,
OID_INL_PHYCAPABILITIES,
OID_INL_OUTPUTPOWER,
OID_NUM_LAST
};
/* We could add more flags. eg: in which mode are they allowed, ro, rw, ...*/
#define OID_FLAG_CACHED 0x01
#define OID_FLAG_U32 0x02
#define OID_FLAG_MLMEEX 0x04 /* this type is special because of a variable
size field when sending. Not yet implemented (not used in driver). */
struct oid_t {
enum oid_num_t oid;
short range; /* to define a range of oid */
short size; /* size of the associated data */
char flags;
};
union oid_res_t {
void *ptr;
u32 u;
};
#define IWMAX_BITRATES 20
#define IWMAX_BSS 24
#define IWMAX_FREQ 30
#endif /* !defined(_ISL_OID_H) */
/* EOF */
drivers/net/wireless/prism54/islpci_dev.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_dev.c,v 1.68 2004/02/28 03:06:07 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
* Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/if_arp.h>
#include <asm/io.h>
#include "isl_38xx.h"
#include "isl_ioctl.h"
#include "islpci_dev.h"
#include "islpci_mgt.h"
#include "islpci_eth.h"
#include "oid_mgt.h"
#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
#define prism54_synchronize_irq(irq) synchronize_irq()
#else
#define prism54_synchronize_irq(irq) synchronize_irq(irq)
#endif
#define ISL3877_IMAGE_FILE "isl3877"
#define ISL3890_IMAGE_FILE "isl3890"
/* Temporary dummy MAC address to use until firmware is loaded.
* The idea there is that some tools (such as nameif) may query
* the MAC address before the netdev is 'open'. By using a valid
* OUI prefix, they can process the netdev properly.
* Of course, this is not the final/real MAC address. It doesn't
* matter, as you are suppose to be able to change it anytime via
* ndev->set_mac_address. Jean II */
const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
/******************************************************************************
Device Interrupt Handler
******************************************************************************/
irqreturn_t
islpci_interrupt(int irq, void *config, struct pt_regs *regs)
{
u32 reg;
islpci_private *priv = config;
struct net_device *ndev = priv->ndev;
void *device = priv->device_base;
int powerstate = ISL38XX_PSM_POWERSAVE_STATE;
/* received an interrupt request on a shared IRQ line
* first check whether the device is in sleep mode */
reg = readl(device + ISL38XX_CTRL_STAT_REG);
if (reg & ISL38XX_CTRL_STAT_SLEEPMODE)
/* device is in sleep mode, IRQ was generated by someone else */
{
printk(KERN_DEBUG "Assuming someone else called the IRQ\n");
return IRQ_NONE;
}
if (islpci_get_state(priv) != PRV_STATE_SLEEP)
powerstate = ISL38XX_PSM_ACTIVE_STATE;
/* lock the interrupt handler */
spin_lock(&priv->slock);
/* check whether there is any source of interrupt on the device */
reg = readl(device + ISL38XX_INT_IDENT_REG);
/* also check the contents of the Interrupt Enable Register, because this
* will filter out interrupt sources from other devices on the same irq ! */
reg &= readl(device + ISL38XX_INT_EN_REG);
reg &= ISL38XX_INT_SOURCES;
if (reg != 0) {
/* reset the request bits in the Identification register */
isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS,
"IRQ: Identification register 0x%p 0x%x \n", device, reg);
#endif
/* check for each bit in the register separately */
if (reg & ISL38XX_INT_IDENT_UPDATE) {
#if VERBOSE > SHOW_ERROR_MESSAGES
/* Queue has been updated */
DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
DEBUG(SHOW_QUEUE_INDEXES,
"CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
le32_to_cpu(priv->control_block->
driver_curr_frag[0]),
le32_to_cpu(priv->control_block->
driver_curr_frag[1]),
le32_to_cpu(priv->control_block->
driver_curr_frag[2]),
le32_to_cpu(priv->control_block->
driver_curr_frag[3]),
le32_to_cpu(priv->control_block->
driver_curr_frag[4]),
le32_to_cpu(priv->control_block->
driver_curr_frag[5])
);
DEBUG(SHOW_QUEUE_INDEXES,
"CB dev Qs: [%i][%i][%i][%i][%i][%i]\n",
le32_to_cpu(priv->control_block->
device_curr_frag[0]),
le32_to_cpu(priv->control_block->
device_curr_frag[1]),
le32_to_cpu(priv->control_block->
device_curr_frag[2]),
le32_to_cpu(priv->control_block->
device_curr_frag[3]),
le32_to_cpu(priv->control_block->
device_curr_frag[4]),
le32_to_cpu(priv->control_block->
device_curr_frag[5])
);
#endif
/* cleanup the data low transmit queue */
islpci_eth_cleanup_transmit(priv, priv->control_block);
/* device is in active state, update the
* powerstate flag if necessary */
powerstate = ISL38XX_PSM_ACTIVE_STATE;
/* check all three queues in priority order
* call the PIMFOR receive function until the
* queue is empty */
if (isl38xx_in_queue(priv->control_block,
ISL38XX_CB_RX_MGMTQ) != 0) {
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"Received frame in Management Queue\n");
#endif
islpci_mgt_receive(ndev);
islpci_mgt_cleanup_transmit(ndev);
/* Refill slots in receive queue */
islpci_mgmt_rx_fill(ndev);
/* no need to trigger the device, next
islpci_mgt_transaction does it */
}
while (isl38xx_in_queue(priv->control_block,
ISL38XX_CB_RX_DATA_LQ) != 0) {
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"Received frame in Data Low Queue \n");
#endif
islpci_eth_receive(priv);
}
/* check whether the data transmit queues were full */
if (priv->data_low_tx_full) {
/* check whether the transmit is not full anymore */
if (ISL38XX_CB_TX_QSIZE -
isl38xx_in_queue(priv->control_block,
ISL38XX_CB_TX_DATA_LQ) >=
ISL38XX_MIN_QTHRESHOLD) {
/* nope, the driver is ready for more network frames */
netif_wake_queue(priv->ndev);
/* reset the full flag */
priv->data_low_tx_full = 0;
}
}
}
if (reg & ISL38XX_INT_IDENT_INIT) {
/* Device has been initialized */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"IRQ: Init flag, device initialized \n");
#endif
wake_up(&priv->reset_done);
}
if (reg & ISL38XX_INT_IDENT_SLEEP) {
/* Device intends to move to powersave state */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
#endif
isl38xx_handle_sleep_request(priv->control_block,
&powerstate,
priv->device_base);
}
if (reg & ISL38XX_INT_IDENT_WAKEUP) {
/* Device has been woken up to active state */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
#endif
isl38xx_handle_wakeup(priv->control_block,
&powerstate, priv->device_base);
}
}
/* sleep -> ready */
if (islpci_get_state(priv) == PRV_STATE_SLEEP
&& powerstate == ISL38XX_PSM_ACTIVE_STATE)
islpci_set_state(priv, PRV_STATE_READY);
/* !sleep -> sleep */
if (islpci_get_state(priv) != PRV_STATE_SLEEP
&& powerstate == ISL38XX_PSM_POWERSAVE_STATE)
islpci_set_state(priv, PRV_STATE_SLEEP);
/* unlock the interrupt handler */
spin_unlock(&priv->slock);
return IRQ_HANDLED;
}
/******************************************************************************
Network Interface Control & Statistical functions
******************************************************************************/
static int
islpci_open(struct net_device *ndev)
{
u32 rc;
islpci_private *priv = ndev->priv;
printk(KERN_DEBUG "%s: islpci_open()\n", ndev->name);
/* reset data structures, upload firmware and reset device */
rc = islpci_reset(priv,1);
if (rc) {
prism54_bring_down(priv);
return rc; /* Returns informative message */
}
netif_start_queue(ndev);
/* netif_mark_up( ndev ); */
return 0;
}
static int
islpci_close(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name);
netif_stop_queue(ndev);
return prism54_bring_down(priv);
}
int
prism54_bring_down(islpci_private *priv)
{
void *device_base = priv->device_base;
u32 reg;
/* we are going to shutdown the device */
islpci_set_state(priv, PRV_STATE_PREBOOT);
/* disable all device interrupts in case they weren't */
isl38xx_disable_interrupts(priv->device_base);
/* For safety reasons, we may want to ensure that no DMA transfer is
* currently in progress by emptying the TX and RX queues. */
/* wait until interrupts have finished executing on other CPUs */
prism54_synchronize_irq(priv->pdev->irq);
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT);
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
reg |= ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
udelay(ISL38XX_WRITEIO_DELAY);
/* clear the Reset bit */
reg &= ~ISL38XX_CTRL_STAT_RESET;
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
wmb();
/* wait a while for the device to reset */
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(50*HZ/1000);
return 0;
}
static int
islpci_upload_fw(islpci_private *priv)
{
islpci_state_t old_state;
u32 rc;
old_state = islpci_set_state(priv, PRV_STATE_BOOT);
printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name);
rc = isl38xx_upload_firmware(priv->firmware,
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,75))
&priv->pdev->dev,
#else
pci_name(priv->pdev),
#endif
priv->device_base,
priv->device_host_address);
if (rc) {
/* error uploading the firmware */
printk(KERN_ERR "%s: could not upload firmware ('%s')\n",
priv->ndev->name, priv->firmware);
islpci_set_state(priv, old_state);
return rc;
}
printk(KERN_DEBUG
"%s: firmware uploaded done, now triggering reset...\n",
priv->ndev->name);
islpci_set_state(priv, PRV_STATE_POSTBOOT);
return 0;
}
static int
islpci_reset_if(islpci_private *priv)
{
long remaining;
int result = -ETIME;
int count;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
/* This is 2.6 specific, nicer, shorter, but not in 2.4 yet */
DEFINE_WAIT(wait);
prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
#else
DECLARE_WAITQUEUE(wait, current);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&priv->reset_done, &wait);
#endif
/* now the last step is to reset the interface */
isl38xx_interface_reset(priv->device_base, priv->device_host_address);
islpci_set_state(priv, PRV_STATE_PREINIT);
for(count = 0; count < 2 && result; count++) {
/* The software reset acknowledge needs about 220 msec here.
* Be conservative and wait for up to one second. */
remaining = schedule_timeout(HZ);
if(remaining > 0) {
result = 0;
break;
}
/* If we're here it's because our IRQ hasn't yet gone through.
* Retry a bit more...
*/
printk(KERN_ERR "%s: device soft reset timed out\n",
priv->ndev->name);
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
/* 2.6 specific too */
finish_wait(&priv->reset_done, &wait);
#else
remove_wait_queue(&priv->reset_done, &wait);
set_current_state(TASK_RUNNING);
#endif
if(result)
return result;
islpci_set_state(priv, PRV_STATE_INIT);
/* Now that the device is 100% up, let's allow
* for the other interrupts --
* NOTE: this is not *yet* true since we've only allowed the
* INIT interrupt on the IRQ line. We can perhaps poll
* the IRQ line until we know for sure the reset went through */
isl38xx_enable_common_interrupts(priv->device_base);
prism54_mib_init_work(priv);
islpci_set_state(priv, PRV_STATE_READY);
return 0;
}
int
islpci_reset(islpci_private *priv, int reload_firmware)
{
isl38xx_control_block *cb = /* volatile not needed */
(isl38xx_control_block *) priv->control_block;
unsigned counter;
int rc;
if (reload_firmware)
islpci_set_state(priv, PRV_STATE_PREBOOT);
else
islpci_set_state(priv, PRV_STATE_POSTBOOT);
printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name);
/* disable all device interrupts in case they weren't */
isl38xx_disable_interrupts(priv->device_base);
/* flush all management queues */
priv->index_mgmt_tx = 0;
priv->index_mgmt_rx = 0;
/* clear the indexes in the frame pointer */
for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
cb->driver_curr_frag[counter] = cpu_to_le32(0);
cb->device_curr_frag[counter] = cpu_to_le32(0);
}
/* reset the mgmt receive queue */
for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
isl38xx_fragment *frag = &cb->rx_data_mgmt[counter];
frag->size = MGMT_FRAME_SIZE;
frag->flags = 0;
frag->address = priv->mgmt_rx[counter].pci_addr;
}
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
cb->rx_data_low[counter].address =
cpu_to_le32((u32) priv->pci_map_rx_address[counter]);
}
/* since the receive queues are filled with empty fragments, now we can
* set the corresponding indexes in the Control Block */
priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] =
cpu_to_le32(ISL38XX_CB_RX_QSIZE);
priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
cpu_to_le32(ISL38XX_CB_MGMT_QSIZE);
/* reset the remaining real index registers and full flags */
priv->free_data_rx = 0;
priv->free_data_tx = 0;
priv->data_low_tx_full = 0;
if (reload_firmware) { /* Should we load the firmware ? */
/* now that the data structures are cleaned up, upload
* firmware and reset interface */
rc = islpci_upload_fw(priv);
if (rc)
return rc;
}
/* finally reset interface */
rc = islpci_reset_if(priv);
if (!rc) /* If successful */
return rc;
printk(KERN_DEBUG "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n");
return rc;
}
struct net_device_stats *
islpci_statistics(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_statistics \n");
#endif
return &priv->statistics;
}
/******************************************************************************
Network device configuration functions
******************************************************************************/
int
islpci_alloc_memory(islpci_private *priv)
{
int counter;
#if VERBOSE > SHOW_ERROR_MESSAGES
printk(KERN_DEBUG "islpci_alloc_memory\n");
#endif
/* remap the PCI device base address to accessable */
if (!(priv->device_base =
ioremap(pci_resource_start(priv->pdev, 0),
ISL38XX_PCI_MEM_SIZE))) {
/* error in remapping the PCI device memory address range */
printk(KERN_ERR "PCI memory remapping failed \n");
return -1;
}
/* memory layout for consistent DMA region:
*
* Area 1: Control Block for the device interface
* Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that
* the number of supported stations in the AP determines the minimal
* size of the buffer !
*/
/* perform the allocation */
priv->driver_mem_address = pci_alloc_consistent(priv->pdev,
HOST_MEM_BLOCK,
&priv->
device_host_address);
if (!priv->driver_mem_address) {
/* error allocating the block of PCI memory */
printk(KERN_ERR "%s: could not allocate DMA memory, aborting!",
"prism54");
return -1;
}
/* assign the Control Block to the first address of the allocated area */
priv->control_block =
(isl38xx_control_block *) priv->driver_mem_address;
/* set the Power Save Buffer pointer directly behind the CB */
priv->device_psm_buffer =
priv->device_host_address + CONTROL_BLOCK_SIZE;
/* make sure all buffer pointers are initialized */
for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0);
priv->control_block->device_curr_frag[counter] = cpu_to_le32(0);
}
priv->index_mgmt_rx = 0;
memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx));
memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx));
/* allocate rx queue for management frames */
if (islpci_mgmt_rx_fill(priv->ndev) < 0)
goto out_free;
/* now get the data rx skb's */
memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx));
memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address));
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
struct sk_buff *skb;
/* allocate an sk_buff for received data frames storage
* each frame on receive size consists of 1 fragment
* include any required allignment operations */
if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) {
/* error allocating an sk_buff structure elements */
printk(KERN_ERR "Error allocating skb.\n");
goto out_free;
}
/* add the new allocated sk_buff to the buffer array */
priv->data_low_rx[counter] = skb;
/* map the allocated skb data area to pci */
priv->pci_map_rx_address[counter] =
pci_map_single(priv->pdev, (void *) skb->data,
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
if (!priv->pci_map_rx_address[counter]) {
/* error mapping the buffer to device
accessable memory address */
printk(KERN_ERR "failed to map skb DMA'able\n");
goto out_free;
}
}
prism54_acl_init(&priv->acl);
prism54_wpa_ie_init(priv);
if (mgt_init(priv))
goto out_free;
return 0;
out_free:
islpci_free_memory(priv);
return -1;
}
int
islpci_free_memory(islpci_private *priv)
{
int counter;
if (priv->device_base)
iounmap(priv->device_base);
priv->device_base = 0;
/* free consistent DMA area... */
if (priv->driver_mem_address)
pci_free_consistent(priv->pdev, HOST_MEM_BLOCK,
priv->driver_mem_address,
priv->device_host_address);
/* clear some dangling pointers */
priv->driver_mem_address = 0;
priv->device_host_address = 0;
priv->device_psm_buffer = 0;
priv->control_block = 0;
/* clean up mgmt rx buffers */
for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
struct islpci_membuf *buf = &priv->mgmt_rx[counter];
if (buf->pci_addr)
pci_unmap_single(priv->pdev, buf->pci_addr,
buf->size, PCI_DMA_FROMDEVICE);
buf->pci_addr = 0;
if (buf->mem)
kfree(buf->mem);
buf->size = 0;
buf->mem = NULL;
}
/* clean up data rx buffers */
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
if (priv->pci_map_rx_address[counter])
pci_unmap_single(priv->pdev,
priv->pci_map_rx_address[counter],
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
priv->pci_map_rx_address[counter] = 0;
if (priv->data_low_rx[counter])
dev_kfree_skb(priv->data_low_rx[counter]);
priv->data_low_rx[counter] = 0;
}
/* Free the acces control list and the WPA list */
prism54_acl_clean(&priv->acl);
prism54_wpa_ie_clean(priv);
mgt_clean(priv);
return 0;
}
#if 0
static void
islpci_set_multicast_list(struct net_device *dev)
{
/* put device into promisc mode and let network layer handle it */
}
#endif
struct net_device *
islpci_setup(struct pci_dev *pdev)
{
islpci_private *priv;
struct net_device *ndev = alloc_etherdev(sizeof (islpci_private));
if (!ndev)
return ndev;
SET_MODULE_OWNER(ndev);
pci_set_drvdata(pdev, ndev);
#if defined(SET_NETDEV_DEV)
SET_NETDEV_DEV(ndev, &pdev->dev);
#endif
/* setup the structure members */
ndev->base_addr = pci_resource_start(pdev, 0);
ndev->irq = pdev->irq;
/* initialize the function pointers */
ndev->open = &islpci_open;
ndev->stop = &islpci_close;
ndev->get_stats = &islpci_statistics;
ndev->get_wireless_stats = &prism54_get_wireless_stats;
ndev->do_ioctl = &prism54_ioctl;
ndev->wireless_handlers =
(struct iw_handler_def *) &prism54_handler_def;
ndev->hard_start_xmit = &islpci_eth_transmit;
/* ndev->set_multicast_list = &islpci_set_multicast_list; */
ndev->addr_len = ETH_ALEN;
ndev->set_mac_address = &prism54_set_mac_address;
/* Get a non-zero dummy MAC address for nameif. Jean II */
memcpy(ndev->dev_addr, dummy_mac, 6);
#ifdef HAVE_TX_TIMEOUT
ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT;
ndev->tx_timeout = &islpci_eth_tx_timeout;
#endif
/* allocate a private device structure to the network device */
priv = ndev->priv;
priv->ndev = ndev;
priv->pdev = pdev;
priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
ARPHRD_IEEE80211: ARPHRD_ETHER;
/* save the start and end address of the PCI memory area */
ndev->mem_start = (unsigned long) priv->device_base;
ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base);
#endif
init_waitqueue_head(&priv->reset_done);
/* init the queue read locks, process wait counter */
sema_init(&priv->mgmt_sem, 1);
priv->mgmt_received = NULL;
init_waitqueue_head(&priv->mgmt_wqueue);
sema_init(&priv->stats_sem, 1);
spin_lock_init(&priv->slock);
/* init state machine with off#1 state */
priv->state = PRV_STATE_OFF;
priv->state_off = 1;
/* initialize workqueue's */
INIT_WORK(&priv->stats_work,
(void (*)(void *)) prism54_update_stats, priv);
priv->stats_timestamp = 0;
/* allocate various memory areas */
if (islpci_alloc_memory(priv))
goto do_free_netdev;
/* select the firmware file depending on the device id */
switch (pdev->device) {
case PCIDEVICE_ISL3890:
case PCIDEVICE_3COM6001:
strcpy(priv->firmware, ISL3890_IMAGE_FILE);
break;
case PCIDEVICE_ISL3877:
strcpy(priv->firmware, ISL3877_IMAGE_FILE);
break;
default:
strcpy(priv->firmware, ISL3890_IMAGE_FILE);
break;
}
if (register_netdev(ndev)) {
DEBUG(SHOW_ERROR_MESSAGES,
"ERROR: register_netdev() failed \n");
goto do_islpci_free_memory;
}
return ndev;
do_islpci_free_memory:
islpci_free_memory(priv);
do_free_netdev:
pci_set_drvdata(pdev, 0);
free_netdev(ndev);
priv = 0;
return NULL;
}
islpci_state_t
islpci_set_state(islpci_private *priv, islpci_state_t new_state)
{
islpci_state_t old_state;
/* lock */
old_state = priv->state;
/* this means either a race condition or some serious error in
* the driver code */
switch (new_state) {
case PRV_STATE_OFF:
priv->state_off++;
default:
priv->state = new_state;
break;
case PRV_STATE_PREBOOT:
/* there are actually many off-states, enumerated by
* state_off */
if (old_state == PRV_STATE_OFF)
priv->state_off--;
/* only if hw_unavailable is zero now it means we either
* were in off#1 state, or came here from
* somewhere else */
if (!priv->state_off)
priv->state = new_state;
break;
};
#if 0
printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n",
priv->ndev->name, old_state, new_state, priv->state_off);
#endif
/* invariants */
BUG_ON(priv->state_off < 0);
BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF));
BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF));
/* unlock */
return old_state;
}
drivers/net/wireless/prism54/islpci_dev.h 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_dev.h,v 1.53 2004/02/28 03:06:07 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
* Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISLPCI_DEV_H
#define _ISLPCI_DEV_H
#include <linux/version.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/list.h>
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
# include <linux/workqueue.h>
#else
# include <linux/tqueue.h>
# define work_struct tq_struct
# define INIT_WORK INIT_TQUEUE
# define schedule_work schedule_task
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23)
#define free_netdev(x) kfree(x)
#define pci_name(x) x->slot_name
#endif
#include "isl_38xx.h"
#include "isl_oid.h"
#include "islpci_mgt.h"
/* some states might not be superflous and may be removed when
design is finalized (hvr) */
typedef enum {
PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */
PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */
PRV_STATE_BOOT, /* boot state (fw upload, run fw) */
PRV_STATE_POSTBOOT, /* after boot state, need reset now */
PRV_STATE_PREINIT, /* pre-init state */
PRV_STATE_INIT, /* init state (restore MIB backup to device) */
PRV_STATE_READY, /* driver&device are in operational state */
PRV_STATE_SLEEP /* device in sleep mode */
} islpci_state_t;
/* ACL using MAC address */
struct mac_entry {
struct list_head _list;
char addr[ETH_ALEN];
};
struct islpci_acl {
enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
struct list_head mac_list; /* a list of mac_entry */
int size; /* size of queue */
struct semaphore sem; /* accessed in ioctls and trap_work */
};
struct islpci_membuf {
int size; /* size of memory */
void *mem; /* address of memory as seen by CPU */
dma_addr_t pci_addr; /* address of memory as seen by device */
};
#define MAX_BSS_WPA_IE_COUNT 64
#define MAX_WPA_IE_LEN 64
struct islpci_bss_wpa_ie {
struct list_head list;
unsigned long last_update;
u8 bssid[ETH_ALEN];
u8 wpa_ie[MAX_WPA_IE_LEN];
size_t wpa_ie_len;
};
typedef struct {
spinlock_t slock; /* generic spinlock; */
u32 priv_oid;
/* our mib cache */
u32 iw_mode;
struct rw_semaphore mib_sem;
void **mib;
char nickname[IW_ESSID_MAX_SIZE+1];
/* Take care of the wireless stats */
struct work_struct stats_work;
struct semaphore stats_sem;
/* remember when we last updated the stats */
unsigned long stats_timestamp;
/* The first is accessed under semaphore locking.
* The second is the clean one we return to iwconfig.
*/
struct iw_statistics local_iwstatistics;
struct iw_statistics iwstatistics;
struct islpci_acl acl;
/* PCI bus allocation & configuration members */
struct pci_dev *pdev; /* PCI structure information */
u32 pci_state[16]; /* used for suspend/resume */
char firmware[33];
void *device_base; /* ioremapped device base address */
/* consistent DMA region */
void *driver_mem_address; /* base DMA address */
dma_addr_t device_host_address; /* base DMA address (bus address) */
dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */
/* our network_device structure */
struct net_device *ndev;
/* device queue interface members */
struct isl38xx_cb *control_block; /* device control block
(== driver_mem_address!) */
/* Each queue has three indexes:
* free/index_mgmt/data_rx/tx (called index, see below),
* driver_curr_frag, and device_curr_frag (in the control block)
* All indexes are ever-increasing, but interpreted modulo the
* device queue size when used.
* index <= device_curr_frag <= driver_curr_frag at all times
* For rx queues, [index, device_curr_frag) contains fragments
* that the interrupt processing needs to handle (owned by driver).
* [device_curr_frag, driver_curr_frag) is the free space in the
* rx queue, waiting for data (owned by device). The driver
* increments driver_curr_frag to indicate to the device that more
* buffers are available.
* If device_curr_frag == driver_curr_frag, no more rx buffers are
* available, and the rx DMA engine of the device is halted.
* For tx queues, [index, device_curr_frag) contains fragments
* where tx is done; they need to be freed (owned by driver).
* [device_curr_frag, driver_curr_frag) contains the frames
* that are being transferred (owned by device). The driver
* increments driver_curr_frag to indicate that more tx work
* needs to be done.
*/
u32 index_mgmt_rx; /* real index mgmt rx queue */
u32 index_mgmt_tx; /* read index mgmt tx queue */
u32 free_data_rx; /* free pointer data rx queue */
u32 free_data_tx; /* free pointer data tx queue */
u32 data_low_tx_full; /* full detected flag */
/* frame memory buffers for the device queues */
struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
/* driver network interface members */
struct net_device_stats statistics;
/* wait for a reset interrupt */
wait_queue_head_t reset_done;
/* used by islpci_mgt_transaction */
struct semaphore mgmt_sem; /* serialize access to mailbox and wqueue */
struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */
wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */
/* state machine */
islpci_state_t state;
int state_off; /* enumeration of off-state, if 0 then
* we're not in any off-state */
/* WPA stuff */
int wpa; /* WPA mode enabled */
struct list_head bss_wpa_list;
int num_bss_wpa;
struct semaphore wpa_sem;
} islpci_private;
static inline islpci_state_t
islpci_get_state(islpci_private *priv)
{
/* lock */
return priv->state;
/* unlock */
}
islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
#define ISLPCI_TX_TIMEOUT (2*HZ)
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75))
# define irqreturn_t void
# define IRQ_HANDLED
# define IRQ_NONE
#endif
irqreturn_t islpci_interrupt(int, void *, struct pt_regs *);
int prism54_post_setup(islpci_private *, int);
int islpci_reset(islpci_private *, int);
static inline void
islpci_trigger(islpci_private *priv)
{
isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
priv->device_base);
}
struct net_device_stats *islpci_statistics(struct net_device *);
int prism54_bring_down(islpci_private *);
int islpci_alloc_memory(islpci_private *);
int islpci_free_memory(islpci_private *);
struct net_device *islpci_setup(struct pci_dev *);
#endif /* _ISLPCI_DEV_H */
drivers/net/wireless/prism54/islpci_eth.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_eth.c,v 1.27 2004/01/30 16:24:00 ajfa Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include "isl_38xx.h"
#include "islpci_eth.h"
#include "islpci_mgt.h"
/******************************************************************************
Network Interface functions
******************************************************************************/
void
islpci_eth_cleanup_transmit(islpci_private *priv,
isl38xx_control_block *control_block)
{
struct sk_buff *skb;
u32 index;
/* compare the control block read pointer with the free pointer */
while (priv->free_data_tx !=
le32_to_cpu(control_block->
device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
/* read the index of the first fragment to be freed */
index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
/* check for holes in the arrays caused by multi fragment frames
* searching for the last fragment of a frame */
if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) {
/* entry is the last fragment of a frame
* free the skb structure and unmap pci memory */
skb = priv->data_low_tx[index];
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
skb, skb->data, skb->len, skb->truesize);
#endif
pci_unmap_single(priv->pdev,
priv->pci_map_tx_address[index],
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
}
/* increment the free data low queue pointer */
priv->free_data_tx++;
}
}
int
islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
isl38xx_control_block *cb = priv->control_block;
u32 index;
dma_addr_t pci_map_address;
int frame_size;
isl38xx_fragment *fragment;
int offset;
struct sk_buff *newskb;
int newskb_offset;
unsigned long flags;
unsigned char wds_mac[6];
u32 curr_frag;
int err = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
#endif
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
/* determine the amount of fragments needed to store the frame */
frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
if (init_wds)
frame_size += 6;
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE) {
printk(KERN_ERR "%s: transmit device queue full when awake\n",
ndev->name);
netif_stop_queue(ndev);
/* trigger the device */
isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
err = -EBUSY;
goto drop_free;
}
/* Check alignment and WDS frame formatting. The start of the packet should
* be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
* and add WDS address information */
if (((long) skb->data & 0x03) | init_wds) {
/* get the number of bytes to add and re-allign */
offset = (4 - (long) skb->data) & 0x03;
offset += init_wds ? 6 : 0;
/* check whether the current skb can be used */
if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
unsigned char *src = skb->data;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
init_wds);
#endif
/* align the buffer on 4-byte boundary */
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
if (init_wds) {
/* wds requires an additional address field of 6 bytes */
skb_put(skb, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
memmove(skb->data + 6, src, skb->len);
memcpy(skb->data, wds_mac, 6);
} else {
memmove(skb->data, src, skb->len);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
src, skb->len);
#endif
} else {
newskb =
dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
newskb_offset = (4 - (long) newskb->data) & 0x03;
/* Check if newskb->data is aligned */
if (newskb_offset)
skb_reserve(newskb, newskb_offset);
skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
if (init_wds) {
memcpy(newskb->data + 6, skb->data, skb->len);
memcpy(newskb->data, wds_mac, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
} else
memcpy(newskb->data, skb->data, skb->len);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
newskb->data, skb->data, skb->len, init_wds);
#endif
newskb->dev = skb->dev;
dev_kfree_skb(skb);
skb = newskb;
}
}
/* display the buffer contents for debugging */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* map the skb buffer to pci memory for DMA operation */
pci_map_address = pci_map_single(priv->pdev,
(void *) skb->data, skb->len,
PCI_DMA_TODEVICE);
if (pci_map_address == 0) {
printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
ndev->name);
err = -EIO;
goto drop_free;
}
/* Place the fragment in the control block structure. */
index = curr_frag % ISL38XX_CB_TX_QSIZE;
fragment = &cb->tx_data_low[index];
priv->pci_map_tx_address[index] = pci_map_address;
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
curr_frag++;
/* The fragment address in the control block must have been
* written before announcing the frame buffer to device. */
wmb();
cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
> ISL38XX_CB_TX_QSIZE) {
/* stop sends from upper layers */
netif_stop_queue(ndev);
/* set the full flag for the transmission queue */
priv->data_low_tx_full = 1;
}
/* trigger the device */
islpci_trigger(priv);
/* unlock the driver code */
spin_unlock_irqrestore(&priv->slock, flags);
/* set the transmission time */
ndev->trans_start = jiffies;
priv->statistics.tx_packets++;
priv->statistics.tx_bytes += skb->len;
return 0;
drop_free:
/* free the skbuf structure before aborting */
dev_kfree_skb(skb);
priv->statistics.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
return err;
}
int
islpci_eth_receive(islpci_private *priv)
{
struct net_device *ndev = priv->ndev;
isl38xx_control_block *control_block = priv->control_block;
struct sk_buff *skb;
u16 size;
u32 index, offset;
unsigned char *src;
int discard = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
#endif
/* the device has written an Ethernet frame in the data area
* of the sk_buff without updating the structure, do it now */
index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
size = le16_to_cpu(control_block->rx_data_low[index].size);
skb = priv->data_low_rx[index];
offset = ((unsigned long) le32_to_cpu(control_block->rx_data_low[index].address) -
(unsigned long) skb->data) & 3;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
control_block->rx_data_low[priv->free_data_rx].address, skb->data,
skb->len, offset, skb->truesize);
#endif
/* delete the streaming DMA mapping before processing the skb */
pci_unmap_single(priv->pdev,
priv->pci_map_rx_address[index],
MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
/* update the skb structure and allign the buffer */
skb_put(skb, size);
if (offset) {
/* shift the buffer allocation offset bytes to get the right frame */
skb_pull(skb, 2);
skb_put(skb, 2);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* check whether WDS is enabled and whether the data frame is a WDS frame */
if (init_wds) {
/* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
src = skb->data + 6;
memmove(skb->data, src, skb->len - 6);
skb_trim(skb, skb->len - 6);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* do some additional sk_buff and network layer parameters */
skb->dev = ndev;
/* take care of monitor mode */
if (priv->iw_mode == IW_MODE_MONITOR) {
/* The card reports full 802.11 packets but with a 20 bytes
* header and without the FCS. But there a is a bit that
* indicates if the packet is corrupted :-) */
/* int i; */
if (skb->data[8] & 0x01){
/* This one is bad. Drop it !*/
discard = 1;
/* printk("BAD\n");*/
}
/*
for(i=0;i<50;i++)
printk("%2.2X:",skb->data[i]);
printk("\n");
*/
skb_pull(skb, 20);
skb->protocol = htons(ETH_P_802_2);
skb->mac.raw = skb->data;
skb->pkt_type = PACKET_OTHERHOST;
} else
skb->protocol = eth_type_trans(skb, ndev);
skb->ip_summed = CHECKSUM_NONE;
priv->statistics.rx_packets++;
priv->statistics.rx_bytes += size;
/* deliver the skb to the network layer */
#ifdef ISLPCI_ETH_DEBUG
printk
("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
skb->data[0], skb->data[1], skb->data[2], skb->data[3],
skb->data[4], skb->data[5]);
#endif
if (discard)
dev_kfree_skb(skb);
else
netif_rx(skb);
/* increment the read index for the rx data low queue */
priv->free_data_rx++;
/* add one or more sk_buff structures */
while (index =
le32_to_cpu(control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
/* allocate an sk_buff for received data frames storage
* include any required allignment operations */
if (skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2), skb == NULL) {
/* error allocating an sk_buff structure elements */
DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
break;
}
/* store the new skb structure pointer */
index = index % ISL38XX_CB_RX_QSIZE;
priv->data_low_rx[index] = skb;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
skb, skb->data, skb->len, index, skb->truesize);
#endif
/* set the streaming DMA mapping for proper PCI bus operation */
priv->pci_map_rx_address[index] =
pci_map_single(priv->pdev, (void *) skb->data,
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
if (priv->pci_map_rx_address[index] == (dma_addr_t) NULL) {
/* error mapping the buffer to device accessable memory address */
DEBUG(SHOW_ERROR_MESSAGES,
"Error mapping DMA address\n");
/* free the skbuf structure before aborting */
dev_kfree_skb((struct sk_buff *) skb);
break;
}
/* update the fragment address */
control_block->rx_data_low[index].address = cpu_to_le32((u32)
priv->
pci_map_rx_address
[index]);
wmb();
/* increment the driver read pointer */
add_le32p((u32 *) & control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
}
/* trigger the device */
islpci_trigger(priv);
return 0;
}
void
islpci_eth_tx_timeout(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
struct net_device_stats *statistics = &priv->statistics;
/* increment the transmit error counter */
statistics->tx_errors++;
#if 0
/* don't do this here! we are not allowed to sleep since we are in interrupt context */
if (islpci_reset(priv))
printk(KERN_ERR "%s: error on TX timeout card reset!\n",
ndev->name);
#endif
/* netif_wake_queue(ndev); */
return;
}
drivers/net/wireless/prism54/islpci_eth.h 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_eth.h,v 1.5 2004/01/12 22:16:32 jmaurer Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISLPCI_ETH_H
#define _ISLPCI_ETH_H
#include "isl_38xx.h"
#include "islpci_dev.h"
void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *);
int islpci_eth_transmit(struct sk_buff *, struct net_device *);
int islpci_eth_receive(islpci_private *);
void islpci_eth_tx_timeout(struct net_device *);
#endif /* _ISL_GEN_H */
drivers/net/wireless/prism54/islpci_hotplug.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_hotplug.c,v 1.56 2004/02/26 23:33:02 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
#include "islpci_dev.h"
#include "islpci_mgt.h" /* for pc_debug */
#include "isl_oid.h"
#define DRV_NAME "prism54"
#define DRV_VERSION "1.0.2.2"
MODULE_AUTHOR("W.Termorshuizen, R.Bastings, H.V.Riedel, prism54.org team");
MODULE_DESCRIPTION("Intersil 802.11 Wireless LAN adapter");
MODULE_LICENSE("GPL");
/* In this order: vendor, device, subvendor, subdevice, class, class_mask,
* driver_data
* Note: for driver_data we put the device's name
* If you have an update for this please contact prism54-devel@prism54.org
* The latest list can be found at http://prism54.org/supported_cards.php */
static const struct pci_device_id prism54_id_tbl[] = {
{
PCIVENDOR_3COM, PCIDEVICE_3COM6001,
PCIVENDOR_3COM, PCIDEVICE_3COM6001,
0, 0,
(unsigned long) "3COM 3CRWE154G72 Wireless LAN adapter"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_DLINK, 0x3202UL,
0, 0,
(unsigned long) "D-Link Air Plus Xtreme G A1 - DWL-g650 A1"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_IODATA, 0xd019UL,
0, 0,
(unsigned long) "I-O Data WN-G54/CB - WN-G54/CB"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_NETGEAR, 0x4800UL,
0, 0,
(unsigned long) "Netgear WG511"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_I4, 0x0020UL,
0, 0,
(unsigned long) "PLANEX GW-DS54G"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_SMC, 0x2802UL,
0, 0,
(unsigned long) "EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card - SMC2802W"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_SMC, 0x2835UL,
0, 0,
(unsigned long) "EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter - SMC2835W"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_INTERSIL, 0x0000UL, /* This was probably a bogus reading... */
0, 0,
(unsigned long) "SparkLAN WL-850F"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_I4, 0x0014UL,
0, 0,
(unsigned long) "I4 Z-Com XG-600"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_I4, 0x0020UL,
0, 0,
(unsigned long) "I4 Z-Com XG-900/PLANEX GW-DS54G"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCIVENDOR_ACCTON, 0xee03UL,
0, 0,
(unsigned long) "SMC 2802Wv2"},
{
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3877,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
(unsigned long) "Intersil PRISM Indigo Wireless LAN adapter"},
{ /* Default */
PCIVENDOR_INTERSIL, PCIDEVICE_ISL3890,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
(unsigned long) "Intersil PRISM Duette/Prism GT Wireless LAN adapter"},
{0,}
};
/* register the device with the Hotplug facilities of the kernel */
MODULE_DEVICE_TABLE(pci, prism54_id_tbl);
static int prism54_probe(struct pci_dev *, const struct pci_device_id *);
static void prism54_remove(struct pci_dev *);
static int prism54_suspend(struct pci_dev *, u32 state);
static int prism54_resume(struct pci_dev *);
static struct pci_driver prism54_driver = {
.name = DRV_NAME,
.id_table = prism54_id_tbl,
.probe = prism54_probe,
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
/* .enable_wake ; we don't support this yet */
};
static void
prism54_get_card_model(struct net_device *ndev)
{
islpci_private *priv;
char *modelp;
priv = ndev->priv;
switch (priv->pdev->subsystem_device) {
case PCIDEVICE_ISL3877:
modelp = "PRISM Indigo";
break;
case PCIDEVICE_3COM6001:
modelp = "3COM 3CRWE154G72";
break;
case 0x3202UL:
modelp = "D-Link DWL-g650 A1";
break;
case 0xd019UL:
modelp = "WN-G54/CB";
break;
case 0x4800UL:
modelp = "Netgear WG511";
break;
case 0x2802UL:
modelp = "SMC2802W";
break;
case 0xee03UL:
modelp = "SMC2802W V2";
break;
case 0x2835UL:
modelp = "SMC2835W";
break;
/* Let's leave this one out for now since it seems bogus/wrong
* Even if the manufacturer did use 0x0000UL it may not be correct
* by their part, therefore deserving no name ;) */
/* case 0x0000UL:
* modelp = "SparkLAN WL-850F";
* break;*/
/* We have two reported for the one below :( */
case 0x0014UL:
modelp = "XG-600";
break;
case 0x0020UL:
modelp = "XG-900/GW-DS54G";
break;
/* Default it */
/*
case PCIDEVICE_ISL3890:
modelp = "PRISM Duette/GT";
break;
*/
default:
modelp = "PRISM Duette/GT";
}
printk(KERN_DEBUG "%s: %s driver detected card model: %s\n",
ndev->name, DRV_NAME, modelp);
return;
}
/******************************************************************************
Module initialization functions
******************************************************************************/
int
prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct net_device *ndev;
u8 latency_tmr;
u32 mem_addr;
islpci_private *priv;
int rvalue;
/* TRACE(DRV_NAME); */
/* Enable the pci device */
if (pci_enable_device(pdev)) {
printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME);
return -ENODEV;
}
/* check whether the latency timer is set correctly */
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr);
#endif
if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) {
/* set the latency timer */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER,
PCIDEVICE_LATENCY_TIMER_VAL);
}
/* enable PCI DMA */
if (pci_set_dma_mask(pdev, 0xffffffff)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}
/* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT)
* 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT)
* The RETRY_TIMEOUT is used to set the number of retries that the core, as a
* Master, will perform before abandoning a cycle. The default value for
* RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
* devices. A write of zero to the RETRY_TIMEOUT register disables this
* function to allow use with any non-compliant legacy devices that may
* execute more retries.
*
* Writing zero to both these two registers will disable both timeouts and
* *can* solve problems caused by devices that are slow to respond.
*/
pci_write_config_byte(pdev, 0x40, 0);
pci_write_config_byte(pdev, 0x41, 0);
/* request the pci device I/O regions */
rvalue = pci_request_regions(pdev, DRV_NAME);
if (rvalue) {
printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n",
DRV_NAME, rvalue);
goto do_pci_disable_device;
}
/* check if the memory window is indeed set */
rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr);
if (rvalue || !mem_addr) {
printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n",
DRV_NAME);
goto do_pci_disable_device;
}
/* enable PCI bus-mastering */
DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME);
pci_set_master(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {
/* error configuring the driver as a network device */
printk(KERN_ERR "%s: could not configure network device\n",
DRV_NAME);
goto do_pci_release_regions;
}
priv = ndev->priv;
islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */
/* card is in unknown state yet, might have some interrupts pending */
isl38xx_disable_interrupts(priv->device_base);
/* request for the interrupt before uploading the firmware */
rvalue = request_irq(pdev->irq, &islpci_interrupt,
SA_SHIRQ, ndev->name, priv);
if (rvalue) {
/* error, could not hook the handler to the irq */
printk(KERN_ERR "%s: could not install IRQ handler\n",
ndev->name);
goto do_unregister_netdev;
}
/* firmware upload is triggered in islpci_open */
/* Pretty card model discovery output */
prism54_get_card_model(ndev);
return 0;
do_unregister_netdev:
unregister_netdev(ndev);
islpci_free_memory(priv);
pci_set_drvdata(pdev, 0);
free_netdev(ndev);
priv = 0;
do_pci_release_regions:
pci_release_regions(pdev);
do_pci_disable_device:
pci_disable_device(pdev);
return -EIO;
}
/* set by cleanup_module */
static volatile int __in_cleanup_module = 0;
/* this one removes one(!!) instance only */
void
prism54_remove(struct pci_dev *pdev)
{
struct net_device *ndev = pci_get_drvdata(pdev);
islpci_private *priv = ndev ? ndev->priv : 0;
BUG_ON(!priv);
if (!__in_cleanup_module) {
printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name);
islpci_set_state(priv, PRV_STATE_OFF);
}
printk(KERN_DEBUG "%s: removing device\n", ndev->name);
unregister_netdev(ndev);
/* free the interrupt request */
if (islpci_get_state(priv) != PRV_STATE_OFF) {
isl38xx_disable_interrupts(priv->device_base);
islpci_set_state(priv, PRV_STATE_OFF);
/* This bellow causes a lockup at rmmod time. It might be
* because some interrupts still linger after rmmod time,
* see bug #17 */
/* pci_set_power_state(pdev, 3);*/ /* try to power-off */
}
free_irq(pdev->irq, priv);
/* free the PCI memory and unmap the remapped page */
islpci_free_memory(priv);
pci_set_drvdata(pdev, 0);
free_netdev(ndev);
priv = 0;
pci_release_regions(pdev);
pci_disable_device(pdev);
}
int
prism54_suspend(struct pci_dev *pdev, u32 state)
{
struct net_device *ndev = pci_get_drvdata(pdev);
islpci_private *priv = ndev ? ndev->priv : 0;
BUG_ON(!priv);
printk(KERN_NOTICE "%s: got suspend request (state %d)\n",
ndev->name, state);
pci_save_state(pdev, priv->pci_state);
/* tell the device not to trigger interrupts for now... */
isl38xx_disable_interrupts(priv->device_base);
/* from now on assume the hardware was already powered down
and don't touch it anymore */
islpci_set_state(priv, PRV_STATE_OFF);
netif_stop_queue(ndev);
netif_device_detach(ndev);
return 0;
}
int
prism54_resume(struct pci_dev *pdev)
{
struct net_device *ndev = pci_get_drvdata(pdev);
islpci_private *priv = ndev ? ndev->priv : 0;
BUG_ON(!priv);
printk(KERN_NOTICE "%s: got resume request\n", ndev->name);
pci_restore_state(pdev, priv->pci_state);
/* alright let's go into the PREBOOT state */
islpci_reset(priv, 1);
netif_device_attach(ndev);
netif_start_queue(ndev);
return 0;
}
static int __init
prism54_module_init(void)
{
printk(KERN_INFO "Loaded %s driver, version %s\n",
DRV_NAME, DRV_VERSION);
__bug_on_wrong_struct_sizes ();
return pci_module_init(&prism54_driver);
}
/* by the time prism54_module_exit() terminates, as a postcondition
* all instances will have been destroyed by calls to
* prism54_remove() */
static void __exit
prism54_module_exit(void)
{
__in_cleanup_module = 1;
pci_unregister_driver(&prism54_driver);
printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME);
__in_cleanup_module = 0;
}
/* register entry points */
module_init(prism54_module_init);
module_exit(prism54_module_exit);
/* EOF */
drivers/net/wireless/prism54/islpci_mgt.c 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_mgt.c,v 1.40 2004/02/01 10:57:23 mcgrof Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/config.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/if_arp.h>
#include "isl_38xx.h"
#include "islpci_mgt.h"
#include "isl_oid.h" /* additional types and defs for isl38xx fw */
#include "isl_ioctl.h"
#include <net/iw_handler.h>
/******************************************************************************
Global variable definition section
******************************************************************************/
int pc_debug = VERBOSE;
MODULE_PARM(pc_debug, "i");
/******************************************************************************
Driver general functions
******************************************************************************/
void
display_buffer(char *buffer, int length)
{
if ((pc_debug & SHOW_BUFFER_CONTENTS) == 0)
return;
while (length > 0) {
printk("[%02x]", *buffer & 255);
length--;
buffer++;
}
printk("\n");
}
/*****************************************************************************
Queue handling for management frames
******************************************************************************/
/*
* Helper function to create a PIMFOR management frame header.
*/
static void
pimfor_encode_header(int operation, u32 oid, u32 length, pimfor_header_t *h)
{
h->version = PIMFOR_VERSION;
h->operation = operation;
h->device_id = PIMFOR_DEV_ID_MHLI_MIB;
h->flags = 0;
h->oid = cpu_to_be32(oid);
h->length = cpu_to_be32(length);
}
/*
* Helper function to analyze a PIMFOR management frame header.
*/
static pimfor_header_t *
pimfor_decode_header(void *data, int len)
{
pimfor_header_t *h = data;
while ((void *) h < data + len) {
if(h->flags & PIMFOR_FLAG_LITTLE_ENDIAN) {
le32_to_cpus(&h->oid);
le32_to_cpus(&h->length);
} else {
be32_to_cpus(&h->oid);
be32_to_cpus(&h->length);
}
if (h->oid != OID_INL_TUNNEL)
return h;
h++;
}
return NULL;
}
/*
* Fill the receive queue for management frames with fresh buffers.
*/
int
islpci_mgmt_rx_fill(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
isl38xx_control_block *cb = /* volatile not needed */
(isl38xx_control_block *) priv->control_block;
u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
#endif
while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
u32 index = curr % ISL38XX_CB_MGMT_QSIZE;
struct islpci_membuf *buf = &priv->mgmt_rx[index];
isl38xx_fragment *frag = &cb->rx_data_mgmt[index];
if (buf->mem == NULL) {
buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC);
if (!buf->mem) {
printk(KERN_WARNING "Error allocating management frame.\n");
return -ENOMEM;
}
buf->size = MGMT_FRAME_SIZE;
}
if (buf->pci_addr == 0) {
buf->pci_addr = pci_map_single(priv->pdev, buf->mem,
MGMT_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
if(!buf->pci_addr) {
printk(KERN_WARNING "Failed to make memory DMA'able\n.");
return -ENOMEM;
}
}
/* be safe: always reset control block information */
frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
frag->flags = 0;
frag->address = cpu_to_le32(buf->pci_addr);
curr++;
/* The fragment address in the control block must have
* been written before announcing the frame buffer to
* device */
wmb();
cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
cpu_to_le32(curr);
}
return 0;
}
/*
* Create and transmit a management frame using "operation" and "oid",
* with arguments data/length.
* We either return an error and free the frame, or we return 0 and
* islpci_mgt_cleanup_transmit() frees the frame in the tx-done
* interrupt.
*/
static int
islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
void *data, int length)
{
islpci_private *priv = ndev->priv;
isl38xx_control_block *cb =
(isl38xx_control_block *) priv->control_block;
void *p;
int err = -EINVAL;
unsigned long flags;
isl38xx_fragment *frag;
struct islpci_membuf buf;
u32 curr_frag;
int index;
int frag_len = length + PIMFOR_HEADER_SIZE;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_transmit\n");
#endif
if (frag_len > MGMT_FRAME_SIZE) {
printk(KERN_DEBUG "%s: mgmt frame too large %d\n",
ndev->name, frag_len);
goto error;
}
err = -ENOMEM;
p = buf.mem = kmalloc(frag_len, GFP_KERNEL);
if (!buf.mem) {
printk(KERN_DEBUG "%s: cannot allocate mgmt frame\n",
ndev->name);
goto error;
}
buf.size = frag_len;
/* create the header directly in the fragment data area */
pimfor_encode_header(operation, oid, length, (pimfor_header_t *) p);
p += PIMFOR_HEADER_SIZE;
if (data)
memcpy(p, data, length);
else
memset(p, 0, length);
#if VERBOSE > SHOW_ERROR_MESSAGES
{
pimfor_header_t *h = buf.mem;
DEBUG(SHOW_PIMFOR_FRAMES,
"PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
h->operation, oid, h->device_id, h->flags, length);
/* display the buffer contents for debugging */
display_buffer((char *) h, sizeof (pimfor_header_t));
display_buffer(p, length);
}
#endif
err = -ENOMEM;
buf.pci_addr = pci_map_single(priv->pdev, buf.mem, frag_len,
PCI_DMA_TODEVICE);
if (!buf.pci_addr) {
printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n",
ndev->name);
goto error_free;
}
/* Protect the control block modifications against interrupts. */
spin_lock_irqsave(&priv->slock, flags);
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ]);
if (curr_frag - priv->index_mgmt_tx >= ISL38XX_CB_MGMT_QSIZE) {
printk(KERN_WARNING "%s: mgmt tx queue is still full\n",
ndev->name);
goto error_unlock;
}
/* commit the frame to the tx device queue */
index = curr_frag % ISL38XX_CB_MGMT_QSIZE;
priv->mgmt_tx[index] = buf;
frag = &cb->tx_data_mgmt[index];
frag->size = cpu_to_le16(frag_len);
frag->flags = 0; /* for any other than the last fragment, set to 1 */
frag->address = cpu_to_le32(buf.pci_addr);
/* The fragment address in the control block must have
* been written before announcing the frame buffer to
* device */
wmb();
cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ] = cpu_to_le32(curr_frag+1);
spin_unlock_irqrestore(&priv->slock, flags);
/* trigger the device */
islpci_trigger(priv);
return 0;
error_unlock:
spin_unlock_irqrestore(&priv->slock, flags);
error_free:
kfree(buf.mem);
error:
return err;
}
/*
* Receive a management frame from the device.
* This can be an arbitrary number of traps, and at most one response
* frame for a previous request sent via islpci_mgt_transmit().
*/
int
islpci_mgt_receive(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
isl38xx_control_block *cb =
(isl38xx_control_block *) priv->control_block;
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
#endif
/* Only once per interrupt, determine fragment range to
* process. This avoids an endless loop (i.e. lockup) if
* frames come in faster than we can process them. */
curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_RX_MGMTQ]);
barrier();
for ( ; priv->index_mgmt_rx < curr_frag; priv->index_mgmt_rx++) {
pimfor_header_t *header;
u32 index = priv->index_mgmt_rx % ISL38XX_CB_MGMT_QSIZE;
struct islpci_membuf *buf = &priv->mgmt_rx[index];
u16 frag_len;
int size;
struct islpci_mgmtframe *frame;
/* I have no idea (and no documentation) if flags != 0
* is possible. Drop the frame, reuse the buffer. */
if(le16_to_cpu(cb->rx_data_mgmt[index].flags) != 0) {
printk(KERN_WARNING "%s: unknown flags 0x%04x\n",
ndev->name,
le16_to_cpu(cb->rx_data_mgmt[index].flags));
continue;
}
/* The device only returns the size of the header(s) here. */
frag_len = le16_to_cpu(cb->rx_data_mgmt[index].size);
/*
* We appear to have no way to tell the device the
* size of a receive buffer. Thus, if this check
* triggers, we likely have kernel heap corruption. */
if (frag_len > MGMT_FRAME_SIZE) {
printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\
n",
ndev->name, frag_len, frag_len);
frag_len = MGMT_FRAME_SIZE;
}
/* Ensure the results of device DMA are visible to the CPU. */
pci_dma_sync_single(priv->pdev, buf->pci_addr,
buf->size, PCI_DMA_FROMDEVICE);
/* Perform endianess conversion for PIMFOR header in-place. */
header = pimfor_decode_header(buf->mem, frag_len);
if (!header) {
printk(KERN_WARNING "%s: no PIMFOR header found\n",
ndev->name);
continue;
}
/* The device ID from the PIMFOR packet received from
* the MVC is always 0. We forward a sensible device_id.
* Not that anyone upstream would care... */
header->device_id = priv->ndev->ifindex;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_PIMFOR_FRAMES,
"PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
header->operation, header->oid, header->device_id,
header->flags, header->length);
/* display the buffer contents for debugging */
display_buffer((char *) header, PIMFOR_HEADER_SIZE);
display_buffer((char *) header + PIMFOR_HEADER_SIZE, header->length);
#endif
/* nobody sends these */
if (header->flags & PIMFOR_FLAG_APPLIC_ORIGIN) {
printk(KERN_DEBUG "%s: errant PIMFOR application frame\n",
ndev->name);
continue;
}
/* Determine frame size, skipping OID_INL_TUNNEL headers. */
size = PIMFOR_HEADER_SIZE + header->length;
frame = kmalloc(sizeof(struct islpci_mgmtframe) + size,
GFP_ATOMIC);
if (!frame) {
printk(KERN_WARNING "%s: Out of memory, cannot handle oid 0x%08x\n",
ndev->name, header->oid);
continue;
}
frame->ndev = ndev;
memcpy(&frame->buf, header, size);
frame->header = (pimfor_header_t *) frame->buf;
frame->data = frame->buf + PIMFOR_HEADER_SIZE;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_PIMFOR_FRAMES,
"frame: header: %p, data: %p, size: %d\n",
frame->header, frame->data, size);
#endif
if (header->operation == PIMFOR_OP_TRAP) {
#if VERBOSE > SHOW_ERROR_MESSAGES
printk(KERN_DEBUG
"TRAP: oid 0x%x, device %i, flags 0x%x length %i\n",
header->oid, header->device_id, header->flags,
header->length);
#endif
/* Create work to handle trap out of interrupt
* context. */
INIT_WORK(&frame->ws, prism54_process_trap, frame);
schedule_work(&frame->ws);
} else {
/* Signal the one waiting process that a response
* has been received. */
if ((frame = xchg(&priv->mgmt_received, frame)) != NULL) {
printk(KERN_WARNING "%s: mgmt response not collected\n",
ndev->name);
kfree(frame);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"Wake up Mgmt Queue\n");
#endif
wake_up(&priv->mgmt_wqueue);
}
}
return 0;
}
/*
* Cleanup the transmit queue by freeing all frames handled by the device.
*/
void
islpci_mgt_cleanup_transmit(struct net_device *ndev)
{
islpci_private *priv = ndev->priv;
isl38xx_control_block *cb = /* volatile not needed */
(isl38xx_control_block *) priv->control_block;
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_cleanup_transmit\n");
#endif
/* Only once per cleanup, determine fragment range to
* process. This avoids an endless loop (i.e. lockup) if
* the device became confused, incrementing device_curr_frag
* rapidly. */
curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_TX_MGMTQ]);
barrier();
for ( ; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) {
int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE;
struct islpci_membuf *buf = &priv->mgmt_tx[index];
pci_unmap_single(priv->pdev, buf->pci_addr, buf->size,
PCI_DMA_TODEVICE);
buf->pci_addr = 0;
kfree(buf->mem);
buf->mem = NULL;
buf->size = 0;
}
}
/*
* Perform one request-response transaction to the device.
*/
int
islpci_mgt_transaction(struct net_device *ndev,
int operation, unsigned long oid,
void *senddata, int sendlen,
struct islpci_mgmtframe **recvframe)
{
islpci_private *priv = ndev->priv;
const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000;
long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies;
int err;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
DEFINE_WAIT(wait);
#else
DECLARE_WAITQUEUE(wait, current);
#endif
if (down_interruptible(&priv->mgmt_sem))
return -ERESTARTSYS;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
prepare_to_wait(&priv->mgmt_wqueue, &wait, TASK_UNINTERRUPTIBLE);
#else
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&priv->mgmt_wqueue, &wait);
#endif
err = islpci_mgt_transmit(ndev, operation, oid, senddata, sendlen);
if(err)
goto out;
err = -ETIMEDOUT;
while (timeout_left > 0) {
int timeleft;
struct islpci_mgmtframe *frame;
timeleft = schedule_timeout(wait_cycle_jiffies);
frame = xchg(&priv->mgmt_received, NULL);
if (frame) {
*recvframe = frame;
err = 0;
goto out;
}
if(timeleft == 0) {
printk(KERN_DEBUG "%s: timeout waiting for mgmt response %lu, trigging device\n",
ndev->name, timeout_left);
islpci_trigger(priv);
}
timeout_left += timeleft - wait_cycle_jiffies;
}
printk(KERN_WARNING "%s: timeout waiting for mgmt response\n",
ndev->name);
/* TODO: we should reset the device here */
out:
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
finish_wait(&priv->mgmt_wqueue, &wait);
#else
remove_wait_queue(&priv->mgmt_wqueue, &wait);
set_current_state(TASK_RUNNING);
#endif
up(&priv->mgmt_sem);
return err;
}
drivers/net/wireless/prism54/islpci_mgt.h 0 → 100644
View file @ 17e2ec07
/* $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_mgt.h,v 1.22 2004/01/30 16:24:00 ajfa Exp $
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISLPCI_MGT_H
#define _ISLPCI_MGT_H
#include <linux/wireless.h>
#include <linux/skbuff.h>
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
# include <linux/workqueue.h>
#else
# include <linux/tqueue.h>
# define work_struct tq_struct
# define INIT_WORK INIT_TQUEUE
# define schedule_work schedule_task
#endif
/*
* Function definitions
*/
#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0)
#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args)
#define TRACE(devname) K_DEBUG(SHOW_TRACING, VERBOSE, "%s: -> " __FUNCTION__ "()\n", devname)
extern int pc_debug;
static const int init_wds = 0; /* help compiler optimize away dead code */
/* General driver definitions */
#define PCIVENDOR_INTERSIL 0x1260UL
#define PCIVENDOR_3COM 0x10b7UL
#define PCIVENDOR_DLINK 0x1186UL
#define PCIVENDOR_I4 0x17cfUL
#define PCIVENDOR_IODATA 0x10fcUL
#define PCIVENDOR_NETGEAR 0x1385UL
#define PCIVENDOR_SMC 0x10b8UL
#define PCIVENDOR_ACCTON 0x1113UL
#define PCIDEVICE_ISL3877 0x3877UL
#define PCIDEVICE_ISL3890 0x3890UL
#define PCIDEVICE_3COM6001 0x6001UL
#define PCIDEVICE_LATENCY_TIMER_MIN 0x40
#define PCIDEVICE_LATENCY_TIMER_VAL 0x50
/* Debugging verbose definitions */
#define SHOW_NOTHING 0x00 /* overrules everything */
#define SHOW_ANYTHING 0xFF
#define SHOW_ERROR_MESSAGES 0x01
#define SHOW_TRAPS 0x02
#define SHOW_FUNCTION_CALLS 0x04
#define SHOW_TRACING 0x08
#define SHOW_QUEUE_INDEXES 0x10
#define SHOW_PIMFOR_FRAMES 0x20
#define SHOW_BUFFER_CONTENTS 0x40
#define VERBOSE 0x01
/* Default card definitions */
#define CARD_DEFAULT_CHANNEL 6
#define CARD_DEFAULT_MODE INL_MODE_CLIENT
#define CARD_DEFAULT_IW_MODE IW_MODE_INFRA
#define CARD_DEFAULT_BSSTYPE DOT11_BSSTYPE_INFRA
#define CARD_DEFAULT_CLIENT_SSID ""
#define CARD_DEFAULT_AP_SSID "default"
#define CARD_DEFAULT_KEY1 "default_key_1"
#define CARD_DEFAULT_KEY2 "default_key_2"
#define CARD_DEFAULT_KEY3 "default_key_3"
#define CARD_DEFAULT_KEY4 "default_key_4"
#define CARD_DEFAULT_WEP 0
#define CARD_DEFAULT_FILTER 0
# define CARD_DEFAULT_WDS 0
#define CARD_DEFAULT_AUTHEN DOT11_AUTH_OS
#define CARD_DEFAULT_DOT1X 0
#define CARD_DEFAULT_MLME_MODE DOT11_MLME_AUTO
#define CARD_DEFAULT_CONFORMANCE OID_INL_CONFORMANCE_NONE
/* PIMFOR package definitions */
#define PIMFOR_ETHERTYPE 0x8828
#define PIMFOR_HEADER_SIZE 12
#define PIMFOR_VERSION 1
#define PIMFOR_OP_GET 0
#define PIMFOR_OP_SET 1
#define PIMFOR_OP_RESPONSE 2
#define PIMFOR_OP_ERROR 3
#define PIMFOR_OP_TRAP 4
#define PIMFOR_OP_RESERVED 5 /* till 255 */
#define PIMFOR_DEV_ID_MHLI_MIB 0
#define PIMFOR_FLAG_APPLIC_ORIGIN 0x01
#define PIMFOR_FLAG_LITTLE_ENDIAN 0x02
static inline void
add_le32p(u32 * le_number, u32 add)
{
*le_number = cpu_to_le32(le32_to_cpup(le_number) + add);
}
void display_buffer(char *, int);
/*
* Type definition section
*
* the structure defines only the header allowing copyless
* frame handling
*/
typedef struct {
u8 version;
u8 operation;
u32 oid;
u8 device_id;
u8 flags;
u32 length;
} __attribute__ ((packed))
pimfor_header_t;
/* A received and interrupt-processed management frame, either for
* schedule_work(prism54_process_trap) or for priv->mgmt_received,
* processed by islpci_mgt_transaction(). */
struct islpci_mgmtframe {
struct net_device *ndev; /* pointer to network device */
pimfor_header_t *header; /* payload header, points into buf */
void *data; /* payload ex header, points into buf */
struct work_struct ws; /* argument for schedule_work() */
char buf[0]; /* fragment buffer */
};
int
islpci_mgt_receive(struct net_device *ndev);
int
islpci_mgmt_rx_fill(struct net_device *ndev);
void
islpci_mgt_cleanup_transmit(struct net_device *ndev);
int
islpci_mgt_transaction(struct net_device *ndev,
int operation, unsigned long oid,
void *senddata, int sendlen,
struct islpci_mgmtframe **recvframe);
static inline void
islpci_mgt_release(struct islpci_mgmtframe *frame)
{
kfree(frame);
}
#endif /* _ISLPCI_MGT_H */
drivers/net/wireless/prism54/oid_mgt.c 0 → 100644
View file @ 17e2ec07
/*
* Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include "islpci_dev.h"
#include "islpci_mgt.h"
#include "isl_oid.h"
#include "oid_mgt.h"
#include "isl_ioctl.h"
/* to convert between channel and freq */
const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
2447, 2452, 2457, 2462, 2467, 2472, 2484
};
const int frequency_list_a[] = { 5170, 5180, 5190, 5200, 5210, 5220, 5230,
5240, 5260, 5280, 5300, 5320
};
#define OID_U32(x) {x, 0, sizeof(u32), OID_FLAG_U32}
#define OID_U32_C(x) {x, 0, sizeof(u32), OID_FLAG_U32 | OID_FLAG_CACHED}
#define OID_STRUCT(x,s) {x, 0, sizeof(s), 0}
#define OID_STRUCT_C(x,s) {x, 0, sizeof(s), OID_FLAG_CACHED}
#define OID_STRUCT_MLME(x){x, 0, sizeof(struct obj_mlme), 0}
#define OID_STRUCT_MLMEEX(x){x, 0, sizeof(struct obj_mlmeex), OID_FLAG_MLMEEX}
#define OID_UNKNOWN(x) {x, 0, 0, 0}
struct oid_t isl_oid[] = {
[GEN_OID_MACADDRESS] = OID_STRUCT(0x00000000, u8[6]),
[GEN_OID_LINKSTATE] = OID_U32(0x00000001),
[GEN_OID_WATCHDOG] = OID_UNKNOWN(0x00000002),
[GEN_OID_MIBOP] = OID_UNKNOWN(0x00000003),
[GEN_OID_OPTIONS] = OID_UNKNOWN(0x00000004),
[GEN_OID_LEDCONFIG] = OID_UNKNOWN(0x00000005),
/* 802.11 */
[DOT11_OID_BSSTYPE] = OID_U32_C(0x10000000),
[DOT11_OID_BSSID] = OID_STRUCT_C(0x10000001, u8[6]),
[DOT11_OID_SSID] = OID_STRUCT_C(0x10000002, struct obj_ssid),
[DOT11_OID_STATE] = OID_U32(0x10000003),
[DOT11_OID_AID] = OID_U32(0x10000004),
[DOT11_OID_COUNTRYSTRING] = OID_STRUCT(0x10000005, u8[4]),
[DOT11_OID_SSIDOVERRIDE] = OID_STRUCT_C(0x10000006, struct obj_ssid),
[DOT11_OID_MEDIUMLIMIT] = OID_U32(0x11000000),
[DOT11_OID_BEACONPERIOD] = OID_U32_C(0x11000001),
[DOT11_OID_DTIMPERIOD] = OID_U32(0x11000002),
[DOT11_OID_ATIMWINDOW] = OID_U32(0x11000003),
[DOT11_OID_LISTENINTERVAL] = OID_U32(0x11000004),
[DOT11_OID_CFPPERIOD] = OID_U32(0x11000005),
[DOT11_OID_CFPDURATION] = OID_U32(0x11000006),
[DOT11_OID_AUTHENABLE] = OID_U32_C(0x12000000),
[DOT11_OID_PRIVACYINVOKED] = OID_U32_C(0x12000001),
[DOT11_OID_EXUNENCRYPTED] = OID_U32_C(0x12000002),
[DOT11_OID_DEFKEYID] = OID_U32_C(0x12000003),
[DOT11_OID_DEFKEYX] = {0x12000004, 3, sizeof (struct obj_key), OID_FLAG_CACHED}, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
[DOT11_OID_STAKEY] = OID_UNKNOWN(0x12000008),
[DOT11_OID_REKEYTHRESHOLD] = OID_U32(0x12000009),
[DOT11_OID_STASC] = OID_UNKNOWN(0x1200000a),
[DOT11_OID_PRIVTXREJECTED] = OID_U32(0x1a000000),
[DOT11_OID_PRIVRXPLAIN] = OID_U32(0x1a000001),
[DOT11_OID_PRIVRXFAILED] = OID_U32(0x1a000002),
[DOT11_OID_PRIVRXNOKEY] = OID_U32(0x1a000003),
[DOT11_OID_RTSTHRESH] = OID_U32_C(0x13000000),
[DOT11_OID_FRAGTHRESH] = OID_U32_C(0x13000001),
[DOT11_OID_SHORTRETRIES] = OID_U32_C(0x13000002),
[DOT11_OID_LONGRETRIES] = OID_U32_C(0x13000003),
[DOT11_OID_MAXTXLIFETIME] = OID_U32_C(0x13000004),
[DOT11_OID_MAXRXLIFETIME] = OID_U32(0x13000005),
[DOT11_OID_AUTHRESPTIMEOUT] = OID_U32(0x13000006),
[DOT11_OID_ASSOCRESPTIMEOUT] = OID_U32(0x13000007),
[DOT11_OID_ALOFT_TABLE] = OID_UNKNOWN(0x1d000000),
[DOT11_OID_ALOFT_CTRL_TABLE] = OID_UNKNOWN(0x1d000001),
[DOT11_OID_ALOFT_RETREAT] = OID_UNKNOWN(0x1d000002),
[DOT11_OID_ALOFT_PROGRESS] = OID_UNKNOWN(0x1d000003),
[DOT11_OID_ALOFT_FIXEDRATE] = OID_U32(0x1d000004),
[DOT11_OID_ALOFT_RSSIGRAPH] = OID_UNKNOWN(0x1d000005),
[DOT11_OID_ALOFT_CONFIG] = OID_UNKNOWN(0x1d000006),
[DOT11_OID_VDCFX] = {0x1b000000, 7, 0, 0},
[DOT11_OID_MAXFRAMEBURST] = OID_U32(0x1b000008),
[DOT11_OID_PSM] = OID_U32(0x14000000),
[DOT11_OID_CAMTIMEOUT] = OID_U32(0x14000001),
[DOT11_OID_RECEIVEDTIMS] = OID_U32(0x14000002),
[DOT11_OID_ROAMPREFERENCE] = OID_U32(0x14000003),
[DOT11_OID_BRIDGELOCAL] = OID_U32(0x15000000),
[DOT11_OID_CLIENTS] = OID_U32(0x15000001),
[DOT11_OID_CLIENTSASSOCIATED] = OID_U32(0x15000002),
[DOT11_OID_CLIENTX] = {0x15000003, 2006, 0, 0}, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
[DOT11_OID_CLIENTFIND] = OID_STRUCT(0x150007DB, u8[6]),
[DOT11_OID_WDSLINKADD] = OID_STRUCT(0x150007DC, u8[6]),
[DOT11_OID_WDSLINKREMOVE] = OID_STRUCT(0x150007DD, u8[6]),
[DOT11_OID_EAPAUTHSTA] = OID_STRUCT(0x150007DE, u8[6]),
[DOT11_OID_EAPUNAUTHSTA] = OID_STRUCT(0x150007DF, u8[6]),
[DOT11_OID_DOT1XENABLE] = OID_U32_C(0x150007E0),
[DOT11_OID_MICFAILURE] = OID_UNKNOWN(0x150007E1),
[DOT11_OID_REKEYINDICATE] = OID_UNKNOWN(0x150007E2),
[DOT11_OID_MPDUTXSUCCESSFUL] = OID_U32(0x16000000),
[DOT11_OID_MPDUTXONERETRY] = OID_U32(0x16000001),
[DOT11_OID_MPDUTXMULTIPLERETRIES] = OID_U32(0x16000002),
[DOT11_OID_MPDUTXFAILED] = OID_U32(0x16000003),
[DOT11_OID_MPDURXSUCCESSFUL] = OID_U32(0x16000004),
[DOT11_OID_MPDURXDUPS] = OID_U32(0x16000005),
[DOT11_OID_RTSSUCCESSFUL] = OID_U32(0x16000006),
[DOT11_OID_RTSFAILED] = OID_U32(0x16000007),
[DOT11_OID_ACKFAILED] = OID_U32(0x16000008),
[DOT11_OID_FRAMERECEIVES] = OID_U32(0x16000009),
[DOT11_OID_FRAMEERRORS] = OID_U32(0x1600000A),
[DOT11_OID_FRAMEABORTS] = OID_U32(0x1600000B),
[DOT11_OID_FRAMEABORTSPHY] = OID_U32(0x1600000C),
[DOT11_OID_SLOTTIME] = OID_U32(0x17000000),
[DOT11_OID_CWMIN] = OID_U32(0x17000001),
[DOT11_OID_CWMAX] = OID_U32(0x17000002),
[DOT11_OID_ACKWINDOW] = OID_U32(0x17000003),
[DOT11_OID_ANTENNARX] = OID_U32(0x17000004),
[DOT11_OID_ANTENNATX] = OID_U32(0x17000005),
[DOT11_OID_ANTENNADIVERSITY] = OID_U32(0x17000006),
[DOT11_OID_CHANNEL] = OID_U32_C(0x17000007),
[DOT11_OID_EDTHRESHOLD] = OID_U32_C(0x17000008),
[DOT11_OID_PREAMBLESETTINGS] = OID_U32(0x17000009),
[DOT11_OID_RATES] = OID_STRUCT(0x1700000A, u8[IWMAX_BITRATES + 1]),
[DOT11_OID_CCAMODESUPPORTED] = OID_U32(0x1700000B),
[DOT11_OID_CCAMODE] = OID_U32(0x1700000C),
[DOT11_OID_RSSIVECTOR] = OID_U32(0x1700000D),
[DOT11_OID_OUTPUTPOWERTABLE] = OID_U32(0x1700000E),
[DOT11_OID_OUTPUTPOWER] = OID_U32_C(0x1700000F),
[DOT11_OID_SUPPORTEDRATES] =
OID_STRUCT(0x17000010, u8[IWMAX_BITRATES + 1]),
[DOT11_OID_FREQUENCY] = OID_U32_C(0x17000011),
[DOT11_OID_SUPPORTEDFREQUENCIES] = {0x17000012, 0, sizeof (struct
obj_frequencies)
+ sizeof (u16) * IWMAX_FREQ, 0},
[DOT11_OID_NOISEFLOOR] = OID_U32(0x17000013),
[DOT11_OID_FREQUENCYACTIVITY] =
OID_STRUCT(0x17000014, u8[IWMAX_FREQ + 1]),
[DOT11_OID_IQCALIBRATIONTABLE] = OID_UNKNOWN(0x17000015),
[DOT11_OID_NONERPPROTECTION] = OID_U32(0x17000016),
[DOT11_OID_SLOTSETTINGS] = OID_U32(0x17000017),
[DOT11_OID_NONERPTIMEOUT] = OID_U32(0x17000018),
[DOT11_OID_PROFILES] = OID_U32(0x17000019),
[DOT11_OID_EXTENDEDRATES] =
OID_STRUCT(0x17000020, u8[IWMAX_BITRATES + 1]),
[DOT11_OID_DEAUTHENTICATE] = OID_STRUCT_MLME(0x18000000),
[DOT11_OID_AUTHENTICATE] = OID_STRUCT_MLME(0x18000001),
[DOT11_OID_DISASSOCIATE] = OID_STRUCT_MLME(0x18000002),
[DOT11_OID_ASSOCIATE] = OID_STRUCT_MLME(0x18000003),
[DOT11_OID_SCAN] = OID_UNKNOWN(0x18000004),
[DOT11_OID_BEACON] = OID_STRUCT_MLMEEX(0x18000005),
[DOT11_OID_PROBE] = OID_STRUCT_MLMEEX(0x18000006),
[DOT11_OID_DEAUTHENTICATEEX] = OID_STRUCT_MLMEEX(0x18000007),
[DOT11_OID_AUTHENTICATEEX] = OID_STRUCT_MLMEEX(0x18000008),
[DOT11_OID_DISASSOCIATEEX] = OID_STRUCT_MLMEEX(0x18000009),
[DOT11_OID_ASSOCIATEEX] = OID_STRUCT_MLMEEX(0x1800000A),
[DOT11_OID_REASSOCIATE] = OID_STRUCT_MLMEEX(0x1800000B),
[DOT11_OID_REASSOCIATEEX] = OID_STRUCT_MLMEEX(0x1800000C),
[DOT11_OID_NONERPSTATUS] = OID_U32(0x1E000000),
[DOT11_OID_STATIMEOUT] = OID_U32(0x19000000),
[DOT11_OID_MLMEAUTOLEVEL] = OID_U32_C(0x19000001),
[DOT11_OID_BSSTIMEOUT] = OID_U32(0x19000002),
[DOT11_OID_ATTACHMENT] = OID_UNKNOWN(0x19000003),
[DOT11_OID_PSMBUFFER] = OID_STRUCT_C(0x19000004, struct obj_buffer),
[DOT11_OID_BSSS] = OID_U32(0x1C000000),
[DOT11_OID_BSSX] = {0x1C000001, 63, sizeof (struct obj_bss), 0}, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
[DOT11_OID_BSSFIND] = OID_STRUCT(0x1C000042, struct obj_bss),
[DOT11_OID_BSSLIST] = {0x1C000043, 0, sizeof (struct
obj_bsslist) +
sizeof (struct obj_bss[IWMAX_BSS]), 0},
[OID_INL_TUNNEL] = OID_UNKNOWN(0xFF020000),
[OID_INL_MEMADDR] = OID_UNKNOWN(0xFF020001),
[OID_INL_MEMORY] = OID_UNKNOWN(0xFF020002),
[OID_INL_MODE] = OID_U32_C(0xFF020003),
[OID_INL_COMPONENT_NR] = OID_UNKNOWN(0xFF020004),
[OID_INL_VERSION] = OID_UNKNOWN(0xFF020005),
[OID_INL_INTERFACE_ID] = OID_UNKNOWN(0xFF020006),
[OID_INL_COMPONENT_ID] = OID_UNKNOWN(0xFF020007),
[OID_INL_CONFIG] = OID_U32_C(0xFF020008),
[OID_INL_DOT11D_CONFORMANCE] = OID_U32_C(0xFF02000C),
[OID_INL_PHYCAPABILITIES] = OID_U32(0xFF02000D),
[OID_INL_OUTPUTPOWER] = OID_U32_C(0xFF02000F),
};
int
mgt_init(islpci_private *priv)
{
int i;
priv->mib = kmalloc(OID_NUM_LAST * sizeof (void *), GFP_KERNEL);
if (!priv->mib)
return -ENOMEM;
memset(priv->mib, 0, OID_NUM_LAST * sizeof (void *));
/* Alloc the cache */
for (i = 0; i < OID_NUM_LAST; i++) {
if (isl_oid[i].flags & OID_FLAG_CACHED) {
priv->mib[i] = kmalloc(isl_oid[i].size *
(isl_oid[i].range + 1),
GFP_KERNEL);
if (!priv->mib[i])
return -ENOMEM;
memset(priv->mib[i], 0,
isl_oid[i].size * (isl_oid[i].range + 1));
} else
priv->mib[i] = NULL;
}
init_rwsem(&priv->mib_sem);
prism54_mib_init(priv);
return 0;
}
void
mgt_clean(islpci_private *priv)
{
int i;
if (!priv->mib)
return;
for (i = 0; i < OID_NUM_LAST; i++)
if (priv->mib[i]) {
kfree(priv->mib[i]);
priv->mib[i] = NULL;
}
kfree(priv->mib);
priv->mib = NULL;
}
int
mgt_set_request(islpci_private *priv, enum oid_num_t n, int extra, void *data)
{
int ret = 0;
struct islpci_mgmtframe *response;
int response_op = PIMFOR_OP_ERROR;
int dlen;
void *cache, *_data = data;
u32 oid, u;
BUG_ON(OID_NUM_LAST <= n);
BUG_ON(extra > isl_oid[n].range);
if (!priv->mib)
/* memory has been freed */
return -1;
dlen = isl_oid[n].size;
cache = priv->mib[n];
cache += (cache ? extra * dlen : 0);
oid = isl_oid[n].oid + extra;
if (data == NULL)
/* we are requested to re-set a cached value */
_data = cache;
if ((isl_oid[n].flags & OID_FLAG_U32) && data) {
u = cpu_to_le32(*(u32 *) data);
_data = &u;
}
/* If we are going to write to the cache, we don't want anyone to read
* it -> acquire write lock.
* Else we could acquire a read lock to be sure we don't bother the
* commit process (which takes a write lock). But I'm not sure if it's
* needed.
*/
if (cache)
down_write(&priv->mib_sem);
if (islpci_get_state(priv) >= PRV_STATE_INIT) {
ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid,
_data, dlen, &response);
if (!ret) {
response_op = response->header->operation;
islpci_mgt_release(response);
}
if (ret || response_op == PIMFOR_OP_ERROR)
ret = -EIO;
} else if (!cache)
ret = -EIO;
if (cache) {
if (!ret && data)
memcpy(cache, _data, dlen);
up_write(&priv->mib_sem);
}
return ret;
}
int
mgt_get_request(islpci_private *priv, enum oid_num_t n, int extra, void *data,
union oid_res_t *res)
{
int ret = -EIO;
int reslen = 0;
struct islpci_mgmtframe *response = NULL;
int dlen;
void *cache, *_res=NULL;
u32 oid;
BUG_ON(OID_NUM_LAST <= n);
BUG_ON(extra > isl_oid[n].range);
if (!priv->mib)
/* memory has been freed */
return -1;
dlen = isl_oid[n].size;
cache = priv->mib[n];
cache += cache ? extra * dlen : 0;
oid = isl_oid[n].oid + extra;
reslen = dlen;
if (cache)
down_read(&priv->mib_sem);
if (islpci_get_state(priv) >= PRV_STATE_INIT) {
ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
oid, data, dlen, &response);
if (ret || !response ||
response->header->operation == PIMFOR_OP_ERROR) {
if (response)
islpci_mgt_release(response);
ret = -EIO;
}
if (!ret) {
_res = response->data;
reslen = response->header->length;
}
} else if (cache) {
_res = cache;
ret = 0;
}
if (isl_oid[n].flags & OID_FLAG_U32) {
if (ret)
res->u = 0;
else
res->u = le32_to_cpu(*(u32 *) _res);
} else {
res->ptr = kmalloc(reslen, GFP_KERNEL);
BUG_ON(res->ptr == NULL);
if (ret)
memset(res->ptr, 0, reslen);
else
memcpy(res->ptr, _res, reslen);
}
if (cache)
up_read(&priv->mib_sem);
if (response && !ret)
islpci_mgt_release(response);
if (reslen > isl_oid[n].size)
printk(KERN_DEBUG
"mgt_get_request(0x%x): received data length was bigger "
"than expected (%d > %d). Memory is probably corrupted... ",
oid, reslen, isl_oid[n].size);
return ret;
}
/* lock outside */
int
mgt_commit_list(islpci_private *priv, enum oid_num_t *l, int n)
{
int i, ret = 0;
struct islpci_mgmtframe *response;
for (i = 0; i < n; i++) {
struct oid_t *t = &(isl_oid[l[i]]);
void *data = priv->mib[l[i]];
int j = 0;
u32 oid = t->oid;
BUG_ON(data == NULL);
while (j <= t->range){
response = NULL;
ret |= islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET,
oid, data, t->size,
&response);
if (response) {
ret |= (response->header->operation ==
PIMFOR_OP_ERROR);
islpci_mgt_release(response);
}
j++;
oid++;
data += t->size;
}
}
return ret;
}
/* Lock outside */
void
mgt_set(islpci_private *priv, enum oid_num_t n, void *data)
{
BUG_ON(OID_NUM_LAST <= n);
BUG_ON(priv->mib[n] == NULL);
memcpy(priv->mib[n], data, isl_oid[n].size);
if (isl_oid[n].flags & OID_FLAG_U32)
*(u32 *) priv->mib[n] = cpu_to_le32(*(u32 *) priv->mib[n]);
}
/* Commits the cache. If something goes wrong, it restarts the device. Lock
* outside
*/
static enum oid_num_t commit_part1[] = {
OID_INL_CONFIG,
OID_INL_MODE,
DOT11_OID_BSSTYPE,
DOT11_OID_CHANNEL,
DOT11_OID_MLMEAUTOLEVEL
};
static enum oid_num_t commit_part2[] = {
DOT11_OID_SSID,
DOT11_OID_PSMBUFFER,
DOT11_OID_AUTHENABLE,
DOT11_OID_PRIVACYINVOKED,
DOT11_OID_EXUNENCRYPTED,
DOT11_OID_DEFKEYX, /* MULTIPLE */
DOT11_OID_DEFKEYID,
DOT11_OID_DOT1XENABLE,
OID_INL_DOT11D_CONFORMANCE,
OID_INL_OUTPUTPOWER,
};
void
mgt_commit(islpci_private *priv)
{
int rvalue;
u32 u;
union oid_res_t r;
if (islpci_get_state(priv) < PRV_STATE_INIT)
return;
rvalue = mgt_commit_list(priv, commit_part1,
sizeof (commit_part1) /
sizeof (commit_part1[0]));
if (priv->iw_mode != IW_MODE_MONITOR)
rvalue |= mgt_commit_list(priv, commit_part2,
sizeof (commit_part2) /
sizeof (commit_part2[0]));
u = OID_INL_MODE;
rvalue |= mgt_commit_list(priv, &u, 1);
if (rvalue) {
/* some request have failed. The device might be in an
incoherent state. We should reset it ! */
printk(KERN_DEBUG "%s: mgt_commit has failed. Restart the "
"device \n", priv->ndev->name);
}
/* update the MAC addr. As it's not cached, no lock will be acquired by
* the mgt_get_request
*/
mgt_get_request(priv, GEN_OID_MACADDRESS, 0, NULL, &r);
memcpy(priv->ndev->dev_addr, r.ptr, 6);
kfree(r.ptr);
}
/* This will tell you if you are allowed to answer a mlme(ex) request .*/
inline int
mgt_mlme_answer(islpci_private *priv)
{
u32 mlmeautolevel;
/* Acquire a read lock because if we are in a mode change, it's
* possible to answer true, while the card is leaving master to managed
* mode. Answering to a mlme in this situation could hang the card.
*/
down_read(&priv->mib_sem);
mlmeautolevel =
le32_to_cpu(*(u32 *) priv->mib[DOT11_OID_MLMEAUTOLEVEL]);
up_read(&priv->mib_sem);
return ((priv->iw_mode == IW_MODE_MASTER) &&
(mlmeautolevel >= DOT11_MLME_INTERMEDIATE));
}
inline enum oid_num_t
mgt_oidtonum(u32 oid)
{
int i;
for (i = 0; i < OID_NUM_LAST - 1; i++)
if (isl_oid[i].oid == oid)
return i;
printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid);
return 0;
}
drivers/net/wireless/prism54/oid_mgt.h 0 → 100644
View file @ 17e2ec07
/*
* Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#if !defined(_OID_MGT_H)
#define _OID_MGT_H
#include "isl_oid.h"
#include "islpci_dev.h"
extern struct oid_t isl_oid[];
int mgt_init(islpci_private *);
void mgt_clean(islpci_private *);
extern const int frequency_list_bg[];
extern const int frequency_list_a[];
int mgt_set_request(islpci_private *, enum oid_num_t, int, void *);
int mgt_get_request(islpci_private *, enum oid_num_t, int, void *,
union oid_res_t *);
int mgt_commit_list(islpci_private *, enum oid_num_t *, int);
void mgt_set(islpci_private *, enum oid_num_t, void *);
void mgt_commit(islpci_private *);
int mgt_mlme_answer(islpci_private *);
enum oid_num_t mgt_oidtonum(u32 oid);
#endif /* !defined(_OID_MGT_H) */
/* EOF */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7