Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

drivers/net/wireless/cw1200/sta.c

@@ -1406,11 +1406,8 @@ static void cw1200_do_unjoin(struct cw1200_common *priv)
 	if (!priv->join_status)
 		goto done;
 
-	if (priv->join_status > CW1200_JOIN_STATUS_IBSS) {
-		wiphy_err(priv->hw->wiphy, "Unexpected: join status: %d\n",
-			  priv->join_status);
-		BUG_ON(1);
-	}
+	if (priv->join_status == CW1200_JOIN_STATUS_AP)
+		goto done;
 
 	cancel_work_sync(&priv->update_filtering_work);
 	cancel_work_sync(&priv->set_beacon_wakeup_period_work);

drivers/net/wireless/iwlegacy/4965-mac.c

@@ -4460,12 +4460,12 @@ il4965_irq_tasklet(struct il_priv *il)
 		 * is killed. Hence update the killswitch state here. The
 		 * rfkill handler will care about restarting if needed.
 		 */
-		if (!test_bit(S_ALIVE, &il->status)) {
-			if (hw_rf_kill)
-				set_bit(S_RFKILL, &il->status);
-			else
-				clear_bit(S_RFKILL, &il->status);
+		if (hw_rf_kill) {
+			set_bit(S_RFKILL, &il->status);
+		} else {
+			clear_bit(S_RFKILL, &il->status);
 			wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
+			il_force_reset(il, true);
 		}
 
 		handled |= CSR_INT_BIT_RF_KILL;
@@ -5334,6 +5334,9 @@ il4965_alive_start(struct il_priv *il)
 
 	il->active_rate = RATES_MASK;
 
+	il_power_update_mode(il, true);
+	D_INFO("Updated power mode\n");
+
 	if (il_is_associated(il)) {
 		struct il_rxon_cmd *active_rxon =
 		    (struct il_rxon_cmd *)&il->active;
@@ -5364,9 +5367,6 @@ il4965_alive_start(struct il_priv *il)
 	D_INFO("ALIVE processing complete.\n");
 	wake_up(&il->wait_command_queue);
 
-	il_power_update_mode(il, true);
-	D_INFO("Updated power mode\n");
-
 	return;
 
 restart:

drivers/net/wireless/iwlegacy/common.c

@@ -4660,6 +4660,7 @@ il_force_reset(struct il_priv *il, bool external)
 
 	return 0;
 }
+EXPORT_SYMBOL(il_force_reset);
 
 int
 il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,

net/mac80211/mlme.c

@@ -31,10 +31,12 @@
 #include "led.h"
 
 #define IEEE80211_AUTH_TIMEOUT		(HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG	(HZ / 2)
 #define IEEE80211_AUTH_TIMEOUT_SHORT	(HZ / 10)
 #define IEEE80211_AUTH_MAX_TRIES	3
 #define IEEE80211_AUTH_WAIT_ASSOC	(HZ * 5)
 #define IEEE80211_ASSOC_TIMEOUT		(HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG	(HZ / 2)
 #define IEEE80211_ASSOC_TIMEOUT_SHORT	(HZ / 10)
 #define IEEE80211_ASSOC_MAX_TRIES	3
 
@@ -209,8 +211,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 			     struct ieee80211_channel *channel,
 			     const struct ieee80211_ht_operation *ht_oper,
 			     const struct ieee80211_vht_operation *vht_oper,
-			     struct cfg80211_chan_def *chandef, bool verbose)
+			     struct cfg80211_chan_def *chandef, bool tracking)
 {
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct cfg80211_chan_def vht_chandef;
 	u32 ht_cfreq, ret;
 
@@ -229,7 +232,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
 						  channel->band);
 	/* check that channel matches the right operating channel */
-	if (channel->center_freq != ht_cfreq) {
+	if (!tracking && channel->center_freq != ht_cfreq) {
 		/*
 		 * It's possible that some APs are confused here;
 		 * Netgear WNDR3700 sometimes reports 4 higher than
@@ -237,11 +240,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 		 * since we look at probe response/beacon data here
 		 * it should be OK.
 		 */
-		if (verbose)
-			sdata_info(sdata,
-				   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
-				   channel->center_freq, ht_cfreq,
-				   ht_oper->primary_chan, channel->band);
+		sdata_info(sdata,
+			   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+			   channel->center_freq, ht_cfreq,
+			   ht_oper->primary_chan, channel->band);
 		ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
 		goto out;
 	}
@@ -295,7 +297,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 				channel->band);
 		break;
 	default:
-		if (verbose)
+		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
 			sdata_info(sdata,
 				   "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
 				   vht_oper->chan_width);
@@ -304,7 +306,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (!cfg80211_chandef_valid(&vht_chandef)) {
-		if (verbose)
+		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
 			sdata_info(sdata,
 				   "AP VHT information is invalid, disable VHT\n");
 		ret = IEEE80211_STA_DISABLE_VHT;
@@ -317,7 +319,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
-		if (verbose)
+		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
 			sdata_info(sdata,
 				   "AP VHT information doesn't match HT, disable VHT\n");
 		ret = IEEE80211_STA_DISABLE_VHT;
@@ -333,18 +335,27 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	if (ret & IEEE80211_STA_DISABLE_VHT)
 		vht_chandef = *chandef;
 
+	/*
+	 * Ignore the DISABLED flag when we're already connected and only
+	 * tracking the APs beacon for bandwidth changes - otherwise we
+	 * might get disconnected here if we connect to an AP, update our
+	 * regulatory information based on the AP's country IE and the
+	 * information we have is wrong/outdated and disables the channel
+	 * that we're actually using for the connection to the AP.
+	 */
 	while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
-					IEEE80211_CHAN_DISABLED)) {
+					tracking ? 0 :
+						   IEEE80211_CHAN_DISABLED)) {
 		if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
 			ret = IEEE80211_STA_DISABLE_HT |
 			      IEEE80211_STA_DISABLE_VHT;
-			goto out;
+			break;
 		}
 
 		ret |= chandef_downgrade(chandef);
 	}
 
-	if (chandef->width != vht_chandef.width && verbose)
+	if (chandef->width != vht_chandef.width && !tracking)
 		sdata_info(sdata,
 			   "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
 
@@ -384,7 +395,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 
 	/* calculate new channel (type) based on HT/VHT operation IEs */
 	flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
-					     vht_oper, &chandef, false);
+					     vht_oper, &chandef, true);
 
 	/*
 	 * Downgrade the new channel if we associated with restricted
@@ -3394,10 +3405,13 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 
 	if (tx_flags == 0) {
 		auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
-		ifmgd->auth_data->timeout_started = true;
+		auth_data->timeout_started = true;
 		run_again(sdata, auth_data->timeout);
 	} else {
-		auth_data->timeout_started = false;
+		auth_data->timeout =
+			round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+		auth_data->timeout_started = true;
+		run_again(sdata, auth_data->timeout);
 	}
 
 	return 0;
@@ -3434,7 +3448,11 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
 		assoc_data->timeout_started = true;
 		run_again(sdata, assoc_data->timeout);
 	} else {
-		assoc_data->timeout_started = false;
+		assoc_data->timeout =
+			round_jiffies_up(jiffies +
+					 IEEE80211_ASSOC_TIMEOUT_LONG);
+		assoc_data->timeout_started = true;
+		run_again(sdata, assoc_data->timeout);
 	}
 
 	return 0;
@@ -3829,7 +3847,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
 						     cbss->channel,
 						     ht_oper, vht_oper,
-						     &chandef, true);
+						     &chandef, false);
 
 	sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
 				      local->rx_chains);

net/wireless/core.c

@@ -765,6 +765,7 @@ void cfg80211_leave(struct cfg80211_registered_device *rdev,
 		cfg80211_leave_mesh(rdev, dev);
 		break;
 	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
 		cfg80211_stop_ap(rdev, dev);
 		break;
 	default:

net/wireless/nl80211.c

@@ -441,10 +441,12 @@ static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
 			goto out_unlock;
 		}
 		*rdev = wiphy_to_dev((*wdev)->wiphy);
-		cb->args[0] = (*rdev)->wiphy_idx;
+		/* 0 is the first index - add 1 to parse only once */
+		cb->args[0] = (*rdev)->wiphy_idx + 1;
 		cb->args[1] = (*wdev)->identifier;
 	} else {
-		struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0]);
+		/* subtract the 1 again here */
+		struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0] - 1);
 		struct wireless_dev *tmp;
 
 		if (!wiphy) {