arm64: dts: ls1043a: Add TMU device tree support for LS1043A

Also add nodes and properties for thermal management support.
Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

@@ -45,7 +45,7 @@
  */
 
 /dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
 
 / {
 	model = "LS1043A QDS Board";

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

@@ -45,7 +45,7 @@
  */
 
 /dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
 
 / {
 	model = "LS1043A RDB Board";

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -44,6 +44,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	compatible = "fsl,ls1043a";
 	interrupt-parent = <&gic>;
@@ -66,6 +68,7 @@ cpu0: cpu@0 {
 			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -254,6 +257,81 @@ ddr: memory-controller@1080000 {
 			big-endian;
 		};
 
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+
+				thermal-sensors = <&tmu 3>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;