Merge mars.ravnborg.org:/home/sam/src/linux/kernel/bk/linux-2.5

into mars.ravnborg.org:/home/sam/src/linux/kernel/bk/docbook

Documentation/DocBook/Makefile

@@ -39,8 +39,8 @@ htmldocs: $(HTML)
 
 ###
 #External programs used
-KERNELDOC=$(objtree)/scripts/kernel-doc
-DOCPROC=$(objtree)/scripts/docproc
+KERNELDOC = scripts/kernel-doc
+DOCPROC   = scripts/docproc
 
 ###
 # DOCPROC is used for two purposes:
@@ -50,14 +50,14 @@ DOCPROC=$(objtree)/scripts/docproc
 # The following rules are used to generate the .sgml documentation
 # required to generate the final targets. (ps, pdf, html).
 quiet_cmd_docproc = DOCPROC $@
-cmd_docproc = $(DOCPROC) doc $< >$@
+      cmd_docproc = $(DOCPROC) doc $< >$@
 define rule_docproc
-	set -e
-        $(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))';) 
-        $(cmd_$(1)); \
-        ( \
-          echo 'cmd_$@ := $(cmd_$(1))'; \
-          echo $@: `$(DOCPROC) depend $<`; \
+	set -e;								\
+        $(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))';) 	\
+        $(cmd_$(1)); 							\
+        ( 								\
+          echo 'cmd_$@ := $(cmd_$(1))'; 				\
+          echo $@: `$(DOCPROC) depend $<`; 				\
         ) > $(dir $@).$(notdir $@).cmd
 endef
 
@@ -96,41 +96,55 @@ $(obj)/parportbook.ps $(obj)/parportbook.pdf: $(EPS-parportbook) $(PNG-parportbo
 ###
 # Rules to generate postscript, PDF and HTML
 # db2html creates a directory. Generate a html file used for timestamp
+
+quiet_cmd_db2ps = DB2PS   $@
+      cmd_db2ps = db2ps -o $(dir $@) $<
 %.ps : %.sgml
 	@(which db2ps > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
-	$(call do_cmd,DB2PS   $@,db2ps -o $(dir $@) $<)
+	$(call cmd,db2ps)
 
+quiet_cmd_db2pdf = DB2PDF  $@
+      cmd_db2pdf = db2pdf -o $(dir $@) $<
 %.pdf : %.sgml
 	@(which db2pdf > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
-	$(call do_cmd,DB2PDF  $@,db2pdf -o $(dir $@) $<)
+	$(call cmd,db2pdf)
+
+quiet_cmd_db2html = DB2HTML $@
+      cmd_db2html = db2html -o $(patsubst %.html,%,$@) $< &&		      \
+		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html"> \
+         Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
 %.html:	%.sgml
 	@(which db2html > /dev/null 2>&1) || \
 	 (echo "*** You need to install DocBook stylesheets ***"; \
 	  exit 1)
 	@rm -rf $@ $(patsubst %.html,%,$@)
-	$(call do_cmd,DB2HTML $@,db2html -o $(patsubst %.html,%,$@) $< && \
-         echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html">\
-         Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@)
+	$(call cmd,db2html)
 	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
             cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
 ###
 # Rules to generate postscripts and PNG imgages from .fig format files
+quiet_cmd_fig2eps = FIG2EPS $@
+      cmd_fig2eps = fig2dev -Leps $< $@
+
 %.eps: %.fig
-	$(call do_cmd,FIG2DEV -Leps $@,fig2dev -Leps $< $@)
+	$(call cmd,fig2eps)
+
+quiet_cmd_fig2png = FIG2PNG $@
+      cmd_fig2png = fig2dev -Lpng $< $@
 
 %.png: %.fig
-	$(call do_cmd,FIG2DEV -Lpng $@,fig2dev -Lpng $< $@)
+	$(call cmd,fig2png)
 
 ###
 # Rule to convert a .c file to inline SGML documentation
 %.sgml: %.c
-	@echo '  Generating $@'
+	@echo '  GEN     $@'
 	@(                            \
 	   echo "<programlisting>";   \
 	   expand --tabs=8 < $< |     \

Documentation/DocBook/kernel-api.tmpl

@@ -79,6 +79,7 @@ KAO -->
      </sect1>
      <sect1><title>String Manipulation</title>
 !Ilib/string.c
+!Elib/string.c
      </sect1>
      <sect1><title>Bit Operations</title>
 !Iinclude/asm-i386/bitops.h
@@ -176,7 +177,7 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
-!Edrivers/hotplug/pci_hotplug_core.c
+!Edrivers/pci/hotplug/pci_hotplug_core.c
      </sect1>
      <sect1><title>MCA Architecture</title>
 	<sect2><title>MCA Device Functions</title>

drivers/net/sis900.c

@@ -211,7 +211,7 @@ static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr);
 static void sis900_set_mode (long ioaddr, int speed, int duplex);
 
 /**
- *	sis900_get_mac_addr: - Get MAC address for stand alone SiS900 model
+ *	sis900_get_mac_addr - Get MAC address for stand alone SiS900 model
  *	@pci_dev: the sis900 pci device
  *	@net_dev: the net device to get address for 
  *
@@ -241,7 +241,7 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 }
 
 /**
- *	sis630e_get_mac_addr: - Get MAC address for SiS630E model
+ *	sis630e_get_mac_addr - Get MAC address for SiS630E model
  *	@pci_dev: the sis900 pci device
  *	@net_dev: the net device to get address for 
  *
@@ -274,7 +274,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_d
 
 
 /**
- *	sis635_get_mac_addr: - Get MAC address for SIS635 model
+ *	sis635_get_mac_addr - Get MAC address for SIS635 model
  *	@pci_dev: the sis900 pci device
  *	@net_dev: the net device to get address for 
  *
@@ -310,7 +310,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 }
 
 /**
- *	sis96x_get_mac_addr: - Get MAC address for SiS962 or SiS963 model
+ *	sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model
  *	@pci_dev: the sis900 pci device
  *	@net_dev: the net device to get address for 
  *
@@ -352,7 +352,7 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 }
 
 /**
- *	sis900_probe: - Probe for sis900 device
+ *	sis900_probe - Probe for sis900 device
  *	@pci_dev: the sis900 pci device
  *	@pci_id: the pci device ID
  *
@@ -498,7 +498,7 @@ static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_dev
 }
 
 /**
- *	sis900_mii_probe: - Probe MII PHY for sis900
+ *	sis900_mii_probe - Probe MII PHY for sis900
  *	@net_dev: the net device to probe for
  *	
  *	Search for total of 32 possible mii phy addresses.
@@ -618,7 +618,7 @@ static int __init sis900_mii_probe (struct net_device * net_dev)
 }
 
 /**
- *	sis900_default_phy: - Select default PHY for sis900 mac.
+ *	sis900_default_phy - Select default PHY for sis900 mac.
  *	@net_dev: the net device to probe for
  *
  *	Select first detected PHY with link as default.
@@ -671,7 +671,7 @@ static u16 sis900_default_phy(struct net_device * net_dev)
 
 
 /**
- * 	sis900_set_capability: - set the media capability of network adapter.
+ * 	sis900_set_capability - set the media capability of network adapter.
  *	@net_dev : the net device to probe for
  *	@phy : default PHY
  *
@@ -701,7 +701,7 @@ static void sis900_set_capability( struct net_device *net_dev , struct mii_phy *
 #define eeprom_delay()  inl(ee_addr)
 
 /**
- *	read_eeprom: - Read Serial EEPROM
+ *	read_eeprom - Read Serial EEPROM
  *	@ioaddr: base i/o address
  *	@location: the EEPROM location to read
  *
@@ -776,7 +776,7 @@ static void mdio_reset(long mdio_addr)
 }
 
 /**
- *	mdio_read: - read MII PHY register
+ *	mdio_read - read MII PHY register
  *	@net_dev: the net device to read
  *	@phy_id: the phy address to read
  *	@location: the phy regiester id to read
@@ -818,7 +818,7 @@ static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
 }
 
 /**
- *	mdio_write: - write MII PHY register
+ *	mdio_write - write MII PHY register
  *	@net_dev: the net device to write
  *	@phy_id: the phy address to write
  *	@location: the phy regiester id to write
@@ -872,7 +872,7 @@ static void mdio_write(struct net_device *net_dev, int phy_id, int location, int
 
 
 /**
- *	sis900_reset_phy: - reset sis900 mii phy.
+ *	sis900_reset_phy - reset sis900 mii phy.
  *	@net_dev: the net device to write
  *	@phy_addr: default phy address
  *
@@ -895,7 +895,7 @@ static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr)
 }
 
 /**
- *	sis900_open: - open sis900 device
+ *	sis900_open - open sis900 device
  *	@net_dev: the net device to open
  *
  *	Do some initialization and start net interface.
@@ -952,7 +952,7 @@ sis900_open(struct net_device *net_dev)
 }
 
 /**
- *	sis900_init_rxfilter: - Initialize the Rx filter
+ *	sis900_init_rxfilter - Initialize the Rx filter
  *	@net_dev: the net device to initialize for
  *
  *	Set receive filter address to our MAC address
@@ -990,7 +990,7 @@ sis900_init_rxfilter (struct net_device * net_dev)
 }
 
 /**
- *	sis900_init_tx_ring: - Initialize the Tx descriptor ring
+ *	sis900_init_tx_ring - Initialize the Tx descriptor ring
  *	@net_dev: the net device to initialize for
  *
  *	Initialize the Tx descriptor ring, 
@@ -1023,7 +1023,7 @@ sis900_init_tx_ring(struct net_device *net_dev)
 }
 
 /**
- *	sis900_init_rx_ring: - Initialize the Rx descriptor ring
+ *	sis900_init_rx_ring - Initialize the Rx descriptor ring
  *	@net_dev: the net device to initialize for
  *
  *	Initialize the Rx descriptor ring, 
@@ -1077,7 +1077,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
 }
 
 /**
- *	sis630_set_eq: - set phy equalizer value for 630 LAN
+ *	sis630_set_eq - set phy equalizer value for 630 LAN
  *	@net_dev: the net device to set equalizer value
  *	@revision: 630 LAN revision number
  *
@@ -1165,7 +1165,7 @@ static void sis630_set_eq(struct net_device *net_dev, u8 revision)
 }
 
 /**
- *	sis900_timer: - sis900 timer routine
+ *	sis900_timer - sis900 timer routine
  *	@data: pointer to sis900 net device
  *
  *	On each timer ticks we check two things, 
@@ -1235,7 +1235,7 @@ static void sis900_timer(unsigned long data)
 }
 
 /**
- *	sis900_check_mode: - check the media mode for sis900
+ *	sis900_check_mode - check the media mode for sis900
  *	@net_dev: the net device to be checked
  *	@mii_phy: the mii phy
  *
@@ -1266,7 +1266,7 @@ static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_p
 }
 
 /**
- *	sis900_set_mode: - Set the media mode of mac register.
+ *	sis900_set_mode - Set the media mode of mac register.
  *	@ioaddr: the address of the device
  *	@speed : the transmit speed to be determined
  *	@duplex: the duplex mode to be determined
@@ -1310,7 +1310,7 @@ static void sis900_set_mode (long ioaddr, int speed, int duplex)
 }
 
 /**
- *	sis900_auto_negotiate:  Set the Auto-Negotiation Enable/Reset bit.
+ *	sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit.
  *	@net_dev: the net device to read mode for
  *	@phy_addr: mii phy address
  *
@@ -1344,7 +1344,7 @@ static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr)
 
 
 /**
- *	sis900_read_mode: - read media mode for sis900 internal phy
+ *	sis900_read_mode - read media mode for sis900 internal phy
  *	@net_dev: the net device to read mode for
  *	@speed  : the transmit speed to be determined
  *	@duplex : the duplex mode to be determined
@@ -1401,7 +1401,7 @@ static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex
 }
 
 /**
- *	sis900_tx_timeout: - sis900 transmit timeout routine
+ *	sis900_tx_timeout - sis900 transmit timeout routine
  *	@net_dev: the net device to transmit
  *
  *	print transmit timeout status
@@ -1456,7 +1456,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
 }
 
 /**
- *	sis900_start_xmit: - sis900 start transmit routine
+ *	sis900_start_xmit - sis900 start transmit routine
  *	@skb: socket buffer pointer to put the data being transmitted
  *	@net_dev: the net device to transmit with
  *
@@ -1526,7 +1526,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 }
 
 /**
- *	sis900_interrupt: - sis900 interrupt handler
+ *	sis900_interrupt - sis900 interrupt handler
  *	@irq: the irq number
  *	@dev_instance: the client data object
  *	@regs: snapshot of processor context
@@ -1587,7 +1587,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance, struct pt_regs
 }
 
 /**
- *	sis900_rx: - sis900 receive routine
+ *	sis900_rx - sis900 receive routine
  *	@net_dev: the net device which receives data
  *
  *	Process receive interrupt events, 
@@ -1726,7 +1726,7 @@ static int sis900_rx(struct net_device *net_dev)
 }
 
 /**
- *	sis900_finish_xmit: - finish up transmission of packets
+ *	sis900_finish_xmit - finish up transmission of packets
  *	@net_dev: the net device to be transmitted on
  *
  *	Check for error condition and free socket buffer etc 
@@ -1796,7 +1796,7 @@ static void sis900_finish_xmit (struct net_device *net_dev)
 }
 
 /**
- *	sis900_close: - close sis900 device 
+ *	sis900_close - close sis900 device 
  *	@net_dev: the net device to be closed
  *
  *	Disable interrupts, stop the Tx and Rx Status Machine 
@@ -1852,7 +1852,7 @@ sis900_close(struct net_device *net_dev)
 }
 
 /**
- *	netdev_ethtool_ioctl: - For the basic support of ethtool
+ *	netdev_ethtool_ioctl - For the basic support of ethtool
  *	@net_dev: the net device to command for
  *	@useraddr: start address of interface request
  *
@@ -1886,7 +1886,7 @@ static int netdev_ethtool_ioctl (struct net_device *net_dev, void *useraddr)
 }
 
 /**
- *	mii_ioctl: - process MII i/o control command 
+ *	mii_ioctl - process MII i/o control command 
  *	@net_dev: the net device to command for
  *	@rq: parameter for command
  *	@cmd: the i/o command
@@ -1922,7 +1922,7 @@ static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd)
 }
 
 /**
- *	sis900_get_stats: - Get sis900 read/write statistics 
+ *	sis900_get_stats - Get sis900 read/write statistics 
  *	@net_dev: the net device to get statistics for
  *
  *	get tx/rx statistics for sis900
@@ -1937,7 +1937,7 @@ sis900_get_stats(struct net_device *net_dev)
 }
 
 /**
- *	sis900_set_config: - Set media type by net_device.set_config 
+ *	sis900_set_config - Set media type by net_device.set_config 
  *	@dev: the net device for media type change
  *	@map: ifmap passed by ifconfig
  *
@@ -2034,7 +2034,7 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map)
 }
 
 /**
- *	sis900_mcast_bitnr: - compute hashtable index 
+ *	sis900_mcast_bitnr - compute hashtable index 
  *	@addr: multicast address
  *	@revision: revision id of chip
  *
@@ -2057,7 +2057,7 @@ static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision)
 }
 
 /**
- *	set_rx_mode: - Set SiS900 receive mode 
+ *	set_rx_mode - Set SiS900 receive mode 
  *	@net_dev: the net device to be set
  *
  *	Set SiS900 receive mode for promiscuous, multicast, or broadcast mode.
@@ -2131,7 +2131,7 @@ static void set_rx_mode(struct net_device *net_dev)
 }
 
 /**
- *	sis900_reset: - Reset sis900 MAC 
+ *	sis900_reset - Reset sis900 MAC 
  *	@net_dev: the net device to reset
  *
  *	reset sis900 MAC and wait until finished
@@ -2166,7 +2166,7 @@ static void sis900_reset(struct net_device *net_dev)
 }
 
 /**
- *	sis900_remove: - Remove sis900 device 
+ *	sis900_remove - Remove sis900 device 
  *	@pci_dev: the pci device to be removed
  *
  *	remove and release SiS900 net device

kernel/kmod.c

@@ -58,9 +58,9 @@ char modprobe_path[256] = "/sbin/modprobe";
  * If module auto-loading support is disabled then this function
  * becomes a no-operation.
  */
-#define MODULENAME_SIZE 32
 int request_module(const char *fmt, ...)
 {
+#define MODULENAME_SIZE 32
 	va_list args;
 	char module_name[MODULENAME_SIZE];
 	unsigned int max_modprobes;

scripts/docproc.c

@@ -93,7 +93,7 @@ void exec_kernel_doc(char **svec)
 			waitpid(pid, &ret ,0);
 	}
 	if (WIFEXITED(ret))
-		exitstatus = WEXITSTATUS(ret);
+		exitstatus |= WEXITSTATUS(ret);
 	else
 		exitstatus = 0xff;
 }

scripts/kernel-doc

@@ -154,6 +154,7 @@ use strict;
 # '%CONST' - name of a constant.
 
 my $errors = 0;
+my $warnings = 0;
 
 # match expressions used to find embedded type information
 my $type_constant = '\%([-_\w]+)';
@@ -1352,7 +1353,9 @@ sub create_parameterlist($$$) {
 		    "or member '$param' not " .
 		    "described in '$declaration_name'\n";
 	    }
-	    ++$errors;
+	    print STDERR "Warning(${file}:$.):".
+	                 " No description found for parameter '$param'\n";
+	    ++$warnings;
         }
 
 	push @parameterlist, $param;
@@ -1456,6 +1459,12 @@ foreach (@ARGV) {
     chomp;
     process_file($_);
 }
+if ($verbose && $errors) {
+  print STDERR "$errors errors\n";
+}
+if ($verbose && $warnings) {
+  print STDERR "$warnings warnings\n";
+}
 
 exit($errors);
 
@@ -1580,7 +1589,7 @@ sub process_file($) {
 	    } else {
 		print STDERR "Warning(${file}:$.): Cannot understand $_ on line $.",
 		" - I thought it was a doc line\n";
-		++$errors;
+		++$warnings;
 		$state = 0;
 	    }
 	} elsif ($state == 2) {	# look for head: lines, and include content
@@ -1633,7 +1642,7 @@ sub process_file($) {
 	    } else {
 		# i dont know - bad line?  ignore.
 		print STDERR "Warning(${file}:$.): bad line: $_"; 
-		++$errors;
+		++$warnings;
 	    }
 	} elsif ($state == 3) {	# scanning for function { (end of prototype)
 	    if ($decl_type eq 'function') {