Commit 1859762e authored by Simon Wood's avatar Simon Wood Committed by Jiri Kosina

HID:hid-lg4ff: Correct Auto-center strength for wheels other than MOMO and MOMO2

The MOMO and MOMO2 wheels have a slightly different autocenter command,
and accept values in the range 0..F (rather than 0..7 for the other wheels).

This patch uses the product ID to determine how to compute the strength.
Signed-off-by: default avatarSimon Wood <simon@mungewell.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 114a55cf
...@@ -234,6 +234,20 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud ...@@ -234,6 +234,20 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
struct hid_report *report = list_entry(report_list->next, struct hid_report, list); struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
__s32 *value = report->field[0]->value; __s32 *value = report->field[0]->value;
__u32 expand_a, expand_b; __u32 expand_a, expand_b;
struct lg4ff_device_entry *entry;
struct lg_drv_data *drv_data;
drv_data = hid_get_drvdata(hid);
if (!drv_data) {
hid_err(hid, "Private driver data not found!\n");
return;
}
entry = drv_data->device_props;
if (!entry) {
hid_err(hid, "Device properties not found!\n");
return;
}
/* De-activate Auto-Center */ /* De-activate Auto-Center */
if (magnitude == 0) { if (magnitude == 0) {
...@@ -257,6 +271,16 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud ...@@ -257,6 +271,16 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
expand_b = (0x80 * 0xaaaa) + 0xff * (magnitude - 0xaaaa); expand_b = (0x80 * 0xaaaa) + 0xff * (magnitude - 0xaaaa);
} }
/* Adjust for non-MOMO wheels */
switch (entry->product_id) {
case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL:
case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2:
break;
default:
expand_a = expand_a >> 1;
break;
}
value[0] = 0xfe; value[0] = 0xfe;
value[1] = 0x0d; value[1] = 0x0d;
value[2] = expand_a / 0xaaaa; value[2] = expand_a / 0xaaaa;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment