Commit 18675e42 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: hda - Add fixup for FSC Celsius H270

Added a fixup table for ALC262 codec containing the entry for FSC
Celsius H270.  Now both headphone jacks are detected properly as
headphones.

Reference: Novell bnc637263
	https://bugzilla.novell.com/show_bug.cgi?id=637263Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 033688a5
...@@ -12205,6 +12205,35 @@ static struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = { ...@@ -12205,6 +12205,35 @@ static struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = {
{} {}
}; };
/*
* Pin config fixes
*/
enum {
PINFIX_FSC_H270,
};
static const struct alc_fixup alc262_fixups[] = {
[PINFIX_FSC_H270] = {
.pins = (const struct alc_pincfg[]) {
{ 0x14, 0x99130110 }, /* speaker */
{ 0x15, 0x0221142f }, /* front HP */
{ 0x1b, 0x0121141f }, /* rear HP */
{ }
}
},
[PINFIX_PB_M5210] = {
.verbs = (const struct hda_verb[]) {
{ 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50 },
{}
}
},
};
static struct snd_pci_quirk alc262_fixup_tbl[] = {
SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", PINFIX_FSC_H270),
{}
};
#ifdef CONFIG_SND_HDA_POWER_SAVE #ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc262_loopbacks alc880_loopbacks #define alc262_loopbacks alc880_loopbacks
...@@ -12628,6 +12657,9 @@ static int patch_alc262(struct hda_codec *codec) ...@@ -12628,6 +12657,9 @@ static int patch_alc262(struct hda_codec *codec)
board_config = ALC262_AUTO; board_config = ALC262_AUTO;
} }
if (board_config == ALC262_AUTO)
alc_pick_fixup(codec, alc262_fixup_tbl, alc262_fixups, 1);
if (board_config == ALC262_AUTO) { if (board_config == ALC262_AUTO) {
/* automatic parse from the BIOS config */ /* automatic parse from the BIOS config */
err = alc262_parse_auto_config(codec); err = alc262_parse_auto_config(codec);
...@@ -12696,6 +12728,9 @@ static int patch_alc262(struct hda_codec *codec) ...@@ -12696,6 +12728,9 @@ static int patch_alc262(struct hda_codec *codec)
if (!spec->no_analog && has_cdefine_beep(codec)) if (!spec->no_analog && has_cdefine_beep(codec))
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
if (board_config == ALC262_AUTO)
alc_pick_fixup(codec, alc262_fixup_tbl, alc262_fixups, 0);
spec->vmaster_nid = 0x0c; spec->vmaster_nid = 0x0c;
codec->patch_ops = alc_patch_ops; codec->patch_ops = alc_patch_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment