Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/gregkh-2.5

drivers/usb/core/hub.c

@@ -1175,7 +1175,7 @@ void usb_hub_cleanup(void)
 int usb_reset_device(struct usb_device *dev)
 {
 	struct usb_device *parent = dev->parent;
-	struct usb_device_descriptor descriptor;
+	struct usb_device_descriptor *descriptor;
 	int i, ret, port = -1;
 
 	if (!parent) {
@@ -1224,17 +1224,24 @@ int usb_reset_device(struct usb_device *dev)
 	 * If nothing changed, we reprogram the configuration and then
 	 * the alternate settings.
 	 */
-	ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &descriptor,
-			sizeof(descriptor));
-	if (ret < 0)
+	descriptor = kmalloc(sizeof *descriptor, GFP_NOIO);
+	if (!descriptor) {
+		return -ENOMEM;
+	}
+	ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, descriptor,
+			sizeof(*descriptor));
+	if (ret < 0) {
+		kfree(descriptor);
 		return ret;
+	}
 
-	le16_to_cpus(&descriptor.bcdUSB);
-	le16_to_cpus(&descriptor.idVendor);
-	le16_to_cpus(&descriptor.idProduct);
-	le16_to_cpus(&descriptor.bcdDevice);
+	le16_to_cpus(&descriptor->bcdUSB);
+	le16_to_cpus(&descriptor->idVendor);
+	le16_to_cpus(&descriptor->idProduct);
+	le16_to_cpus(&descriptor->bcdDevice);
 
-	if (memcmp(&dev->descriptor, &descriptor, sizeof(descriptor))) {
+	if (memcmp(&dev->descriptor, descriptor, sizeof(*descriptor))) {
+		kfree(descriptor);
 		usb_destroy_configuration(dev);
 
 		ret = usb_get_device_descriptor(dev);
@@ -1268,6 +1275,8 @@ int usb_reset_device(struct usb_device *dev)
 		return 1;
 	}
 
+	kfree(descriptor);
+
 	ret = usb_set_configuration(dev, dev->actconfig->desc.bConfigurationValue);
 	if (ret < 0) {
 		err("failed to set dev %s active configuration (error=%d)",

drivers/usb/core/message.c

@@ -88,7 +88,7 @@ int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe,
 	int retv;
 	int length;
 
-	urb = usb_alloc_urb(0, GFP_KERNEL);
+	urb = usb_alloc_urb(0, GFP_NOIO);
 	if (!urb)
 		return -ENOMEM;
   
@@ -131,7 +131,7 @@ int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe,
 int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
 			 __u16 value, __u16 index, void *data, __u16 size, int timeout)
 {
-	struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
 	int ret;
 	
 	if (!dr)

drivers/usb/host/ehci-dbg.c

@@ -117,10 +117,10 @@ static inline void dbg_hcc_params (struct ehci_hcd *ehci, char *label) {}
 static void __attribute__((__unused__))
 dbg_qh (char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	dbg ("%s %p info1 %x info2 %x hw_curr %x qtd_next %x", label,
-		qh, qh->hw_info1, qh->hw_info2,
+	dbg ("%s %p n%08x info1 %x info2 %x hw_curr %x qtd_next %x", label,
+		qh, qh->hw_next, qh->hw_info1, qh->hw_info2,
 		qh->hw_current, qh->hw_qtd_next);
-	dbg ("  alt+errs= %x, token= %x, page0= %x, page1= %x",
+	dbg ("  alt+nak+t= %x, token= %x, page0= %x, page1= %x",
 		qh->hw_alt_next, qh->hw_token,
 		qh->hw_buf [0], qh->hw_buf [1]);
 	if (qh->hw_buf [2]) {

drivers/usb/host/ehci-hcd.c

@@ -576,7 +576,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
 	int			ports;
 	int			i;
 
-	dbg ("%s: suspend to %d", hcd_to_bus (hcd)->bus_name, state);
+	ehci_dbg (ehci, "suspend to %d\n", state);
 
 	ports = HCS_N_PORTS (ehci->hcs_params);
 
@@ -593,7 +593,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
 		if ((temp & PORT_PE) == 0
 				|| (temp & PORT_OWNER) != 0)
 			continue;
-dbg ("%s: suspend port %d", hcd_to_bus (hcd)->bus_name, i);
+		ehci_dbg (ehci, "suspend port %d", i);
 		temp |= PORT_SUSPEND;
 		writel (temp, &ehci->regs->port_status [i]);
 	}
@@ -615,7 +615,7 @@ static int ehci_resume (struct usb_hcd *hcd)
 	int			ports;
 	int			i;
 
-	dbg ("%s: resume", hcd_to_bus (hcd)->bus_name);
+	ehci_dbg (ehci, "resume\n");
 
 	ports = HCS_N_PORTS (ehci->hcs_params);
 
@@ -635,7 +635,7 @@ static int ehci_resume (struct usb_hcd *hcd)
 		if ((temp & PORT_PE) == 0
 				|| (temp & PORT_SUSPEND) != 0)
 			continue;
-dbg ("%s: resume port %d", hcd_to_bus (hcd)->bus_name, i);
+		ehci_dbg (ehci, "resume port %d", i);
 		temp |= PORT_RESUME;
 		writel (temp, &ehci->regs->port_status [i]);
 		readl (&ehci->regs->command);	/* unblock posted writes */
@@ -880,8 +880,8 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 	/* ASSERT:  no requests/urbs are still linked (so no TDs) */
 	/* ASSERT:  nobody can be submitting urbs for this any more */
 
-	dbg ("%s: free_config devnum %d",
-		hcd_to_bus (hcd)->bus_name, udev->devnum);
+	ehci_dbg (ehci, "free_config %s devnum %d\n",
+			udev->devpath, udev->devnum);
 
 	spin_lock_irqsave (&ehci->lock, flags);
 	for (i = 0; i < 32; i++) {
@@ -912,7 +912,8 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 			dev->ep [i] = 0;
 			if (qh->qh_state == QH_STATE_IDLE)
 				goto idle;
-			dbg ("free_config, async ep 0x%02x qh %p", i, qh);
+			ehci_dbg (ehci, "free_config, async ep 0x%02x qh %p",
+					i, qh);
 
 			/* scan_async() empties the ring as it does its work,
 			 * using IAA, but doesn't (yet?) turn it off.  if it

drivers/usb/image/scanner.c

@@ -347,8 +347,9 @@
  *    - Don't print errors when the device is busy.
  *      
  * 0.4.11  2003-02-25
- *    - Added vendor/product ids for Artec, Avision, Brother, Medion, Primax,
- *      Prolink, Fujitsu, Plustek, and SYSCAN scanners.
+ *    - Added vendor/product ids for Artec, Avision, Brother, Canon, Compaq,
+ *      Fujitsu, Hewlett-Packard, Lexmark, LG Electronics, Medion, Microtek,
+ *      Primax, Prolink,  Plustek, SYSCAN, Trust and UMAX scanners.
  *    - Fixed generation of devfs names if dynamic minors are disabled.
  *    - Used kobject reference counting to free the scn struct when the device
  *      is closed and disconnected. Avoids crashes when writing to a 

drivers/usb/image/scanner.h

@@ -105,6 +105,7 @@ static struct usb_device_id scanner_device_ids [] = {
 	{ USB_DEVICE(0x0638, 0x0a10) },	/* iVina FB1600 (=Umax Astra 4500) */
 	/* Benq: see Acer */
 	/* Brother */
+	{ USB_DEVICE(0x04f9, 0x010f) },	/* MFC 5100C */
 	{ USB_DEVICE(0x04f9, 0x0111) },	/* MFC 6800 */
 	/* Canon */
 	{ USB_DEVICE(0x04a9, 0x2201) }, /* CanoScan FB320U */
@@ -118,9 +119,11 @@ static struct usb_device_id scanner_device_ids [] = {
 	{ USB_DEVICE(0x04a9, 0x220c) },	/* CanoScan D1250U2 */
 	{ USB_DEVICE(0x04a9, 0x220d) }, /* CanoScan N670U/N676U/LIDE 20 */
 	{ USB_DEVICE(0x04a9, 0x220e) }, /* CanoScan N1240U/LIDE 30 */
+	{ USB_DEVICE(0x04a9, 0x2213) },	/* LIDE 50 */
 	{ USB_DEVICE(0x04a9, 0x3042) }, /* FS4000US */
 	/* Colorado -- See Primax/Colorado below */
 	/* Compaq */
+	{ USB_DEVICE(0x049f, 0x001a) },	/* S4 100 */
 	{ USB_DEVICE(0x049f, 0x0021) },	/* S200 */
 	/* Epson -- See Seiko/Epson below */
 	/* Fujitsu */
@@ -152,6 +155,8 @@ static struct usb_device_id scanner_device_ids [] = {
 	{ USB_DEVICE(0x03f0, 0x0705) }, /* ScanJet 4400C */
 	//	{ USB_DEVICE(0x03f0, 0x0801) },	/* ScanJet 7400C - NOT SUPPORTED - use hpusbscsi driver */
 	{ USB_DEVICE(0x03f0, 0x0901) }, /* ScanJet 2300C */
+	{ USB_DEVICE(0x03F0, 0x1005) },	/* ScanJet 5400C */
+	{ USB_DEVICE(0x03F0, 0x1105) },	/* ScanJet 5470C */
 	{ USB_DEVICE(0x03f0, 0x1305) },	/* Scanjet 4570c */
 	{ USB_DEVICE(0x03f0, 0x2005) },	/* ScanJet 3570c */
 	{ USB_DEVICE(0x03f0, 0x2205) },	/* ScanJet 3500c */
@@ -159,12 +164,16 @@ static struct usb_device_id scanner_device_ids [] = {
 	{ USB_DEVICE(0x0638, 0x0268) }, /* 1200U */
 	/* Lexmark */
 	{ USB_DEVICE(0x043d, 0x002d) }, /* X70/X73 */
+	{ USB_DEVICE(0x043d, 0x003d) }, /* X83 */
+	/* LG Electronics */
+	{ USB_DEVICE(0x0461, 0x0364) },	/* Scanworks 600U (repackaged Primax?) */
 	/* Medion */
 	{ USB_DEVICE(0x0461, 0x0377) },	/* MD 5345 - repackaged Primax? */
 	/* Memorex */
 	{ USB_DEVICE(0x0461, 0x0346) }, /* 6136u - repackaged Primax ? */
 	/* Microtek */
 	{ USB_DEVICE(0x05da, 0x30ce) },	/* ScanMaker 3800 */
+	{ USB_DEVICE(0x05da, 0x30cf) },	/* ScanMaker 4800 */
 	/* The following SCSI-over-USB Microtek devices are supported by the
 	   microtek driver: Enable SCSI and USB Microtek in kernel config */
 	//	{ USB_DEVICE(0x05da, 0x0099) },	/* ScanMaker X6 - X6U */
@@ -259,7 +268,11 @@ static struct usb_device_id scanner_device_ids [] = {
 	{ USB_DEVICE(0x04b8, 0x0802) }, /* Stylus CX3200 */
 	/* SYSCAN */
 	{ USB_DEVICE(0x0a82, 0x4600) }, /* TravelScan 460/464 */
+	/* Trust */
+	{ USB_DEVICE(0x05cb, 0x1483) }, /* CombiScan 19200 */
+	{ USB_DEVICE(0x05d8, 0x4006) }, /* Easy Webscan 19200 (repackaged Artec?) */
 	/* Umax */
+	{ USB_DEVICE(0x05d8, 0x4009) },	/* Astraslim (actually Artec?) */
 	{ USB_DEVICE(0x1606, 0x0010) },	/* Astra 1220U */
 	{ USB_DEVICE(0x1606, 0x0030) },	/* Astra 2000U */
 	{ USB_DEVICE(0x1606, 0x0060) }, /* Astra 3400U/3450U */

drivers/usb/input/hid-core.c

@@ -1334,6 +1334,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_TANGTOP          0x0d3d
 #define USB_DEVICE_ID_TANGTOP_USBPS2   0x0001
 
+#define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
+#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5	0x0100
+
 struct hid_blacklist {
 	__u16 idVendor;
 	__u16 idProduct;
@@ -1377,6 +1380,7 @@ struct hid_blacklist {
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
 	{ 0, 0 }
 };
 

drivers/usb/misc/Makefile

@@ -12,5 +12,3 @@ obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
 obj-$(CONFIG_USB_TEST)		+= usbtest.o
 obj-$(CONFIG_USB_TIGL)		+= tiglusb.o
 obj-$(CONFIG_USB_USS720)	+= uss720.o
-
-speedtch-objs := speedtouch.o atmsar.o

drivers/usb/misc/atmsar.h

-#ifndef _ATMSAR_H_
-#define _ATMSAR_H_
-
-/******************************************************************************
- *  atmsar.h  --  General SAR library for ATM devices.
- *
- *  Copyright (C) 2000, Johan Verrept
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- ******************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/atmdev.h>
-#include <linux/skbuff.h>
-#include <linux/types.h>
-#include <linux/atm.h>
-
-#define ATMSAR_USE_53BYTE_CELL  0x1L
-#define ATMSAR_SET_PTI          0x2L
-
-#define ATM_CELL_HEADER		(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
-
-/* types */
-#define ATMSAR_TYPE_AAL0        ATM_AAL0
-#define ATMSAR_TYPE_AAL1        ATM_AAL1
-#define ATMSAR_TYPE_AAL2        ATM_AAL2
-#define ATMSAR_TYPE_AAL34       ATM_AAL34
-#define ATMSAR_TYPE_AAL5        ATM_AAL5
-
-
-/* default MTU's */
-#define ATMSAR_DEF_MTU_AAL0         48
-#define ATMSAR_DEF_MTU_AAL1         47
-#define ATMSAR_DEF_MTU_AAL2          0	/* not supported */
-#define ATMSAR_DEF_MTU_AAL34         0	/* not supported */
-#define ATMSAR_DEF_MTU_AAL5      65535	/* max mtu ..    */
-
-struct atmsar_vcc_data {
-	struct atmsar_vcc_data *next;
-
-	/* general atmsar flags, per connection */
-	int flags;
-	int type;
-
-	/* connection specific non-atmsar data */
-	struct atm_vcc *vcc;
-	struct k_atm_aal_stats *stats;
-	unsigned short mtu;	/* max is actually  65k for AAL5... */
-
-	/* cell data */
-	unsigned int vp;
-	unsigned int vc;
-	unsigned char gfc;
-	unsigned char pti;
-	unsigned int headerFlags;
-	unsigned long atmHeader;
-
-	/* raw cell reassembly */
-	struct sk_buff *reasBuffer;
-};
-
-
-extern struct atmsar_vcc_data *atmsar_open (struct atmsar_vcc_data **list, struct atm_vcc *vcc,
-					    uint type, ushort vpi, ushort vci, unchar pti,
-					    unchar gfc, uint flags);
-extern void atmsar_close (struct atmsar_vcc_data **list, struct atmsar_vcc_data *vcc);
-
-struct sk_buff *atmsar_decode_rawcell (struct atmsar_vcc_data *list, struct sk_buff *skb,
-				       struct atmsar_vcc_data **ctx);
-struct sk_buff *atmsar_decode_aal5 (struct atmsar_vcc_data *ctx, struct sk_buff *skb);
-
-#endif				/* _ATMSAR_H_ */

drivers/usb/net/cdc-ether.c

@@ -1064,15 +1064,23 @@ static void set_ethernet_addr( ether_dev_t *ether_dev )
 // Used by driver's probe routine ////////////////////////////////////////////
 //////////////////////////////////////////////////////////////////////////////
 
-void log_device_info(ether_dev_t *ether_dev)
+static void log_device_info(ether_dev_t *ether_dev)
 {
 	int len;
 	int string_num;
-	unsigned char manu[256];
-	unsigned char prod[256];
-	unsigned char sern[256];
+	unsigned char *manu = NULL;
+	unsigned char *prod = NULL;
+	unsigned char *sern = NULL;
 	unsigned char *mac_addr;
 
+	manu = kmalloc(256, GFP_KERNEL);
+	prod = kmalloc(256, GFP_KERNEL);
+	sern = kmalloc(256, GFP_KERNEL);
+	if (!manu || !prod || !sern) {
+		dbg("no mem for log_device_info");
+		goto fini;
+	}
+
 	// Default empty strings in case we don't find a real one
 	manu[0] = 0x00;
 	prod[0] = 0x00;
@@ -1113,6 +1121,10 @@ void log_device_info(ether_dev_t *ether_dev)
 	      ether_dev->net->name, manu, prod, sern, mac_addr[0], 
 	      mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], 
 	      mac_addr[5] );
+fini:
+	kfree(manu);
+	kfree(prod);
+	kfree(sern);
 }
 
 /* Forward declaration */

drivers/usb/net/pegasus.c

@@ -121,7 +121,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 	char *buffer;
 	DECLARE_WAITQUEUE(wait, current);
 
-	buffer = kmalloc(size, GFP_DMA);
+	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer) {
 		warn("%s: looks like we're out of memory", __FUNCTION__);
 		return -ENOMEM;
@@ -170,7 +170,7 @@ static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 	char *buffer;
 	DECLARE_WAITQUEUE(wait, current);
 
-	buffer = kmalloc(size, GFP_DMA);
+	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer) {
 		warn("%s: looks like we're out of memory", __FUNCTION__);
 		return -ENOMEM;
@@ -218,7 +218,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	char *tmp;
 	DECLARE_WAITQUEUE(wait, current);
 
-	tmp = kmalloc(1, GFP_DMA);
+	tmp = kmalloc(1, GFP_KERNEL);
 	if (!tmp) {
 		warn("%s: looks like we're out of memory", __FUNCTION__);
 		return -ENOMEM;

drivers/usb/serial/whiteheat.c

@@ -783,7 +783,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un
 			if (info->mcr & UART_MCR_RTS)
 				modem_signals |= TIOCM_RTS;
 			
-			if (copy_to_user((unsigned int *)arg, &modem_signals, sizeof(unsigned int)));
+			if (copy_to_user((unsigned int *)arg, &modem_signals, sizeof(unsigned int)))
 				return -EFAULT;
 
 			break;