Commit 19750336 authored by Andrew Victor's avatar Andrew Victor Committed by Russell King

[ARM] 5059/1: [AT91] Convert to new-style UART initialization

Convert the following AT91RM9200-based boards to the new-style UART
initialization:
  - Conitec ARM&EVA
  - Atmel AT91RM9200-DK
  - Embest ATEB9200
  - Atmel AT91RM9200-EK
  - KwikByte KB920x
Signed-off-by: default avatarAndrew Victor <linux@maxim.org.za>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 7b225341
...@@ -40,24 +40,21 @@ ...@@ -40,24 +40,21 @@
#include "generic.h" #include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata carmeva_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init carmeva_map_io(void) static void __init carmeva_map_io(void)
{ {
/* Initialize processor: 20.000 MHz crystal */ /* Initialize processor: 20.000 MHz crystal */
at91rm9200_initialize(20000000, AT91RM9200_BGA); at91rm9200_initialize(20000000, AT91RM9200_BGA);
/* Setup the serial ports and console */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_init_serial(&carmeva_uart_config); at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
} }
static void __init carmeva_init_irq(void) static void __init carmeva_init_irq(void)
......
...@@ -45,10 +45,10 @@ static void __init csb637_map_io(void) ...@@ -45,10 +45,10 @@ static void __init csb637_map_io(void)
/* Initialize processor: 3.6864 MHz crystal */ /* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400, AT91RM9200_BGA); at91rm9200_initialize(3686400, AT91RM9200_BGA);
/* DBGU on ttyS0 */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0); at91_register_uart(0, 0, 0);
/* make console=ttyS0 the default */ /* make console=ttyS0 (ie, DBGU) the default */
at91_set_serial_console(0); at91_set_serial_console(0);
} }
......
...@@ -45,17 +45,6 @@ ...@@ -45,17 +45,6 @@
#include "generic.h" #include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata dk_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init dk_map_io(void) static void __init dk_map_io(void)
{ {
/* Initialize processor: 18.432 MHz crystal */ /* Initialize processor: 18.432 MHz crystal */
...@@ -64,8 +53,16 @@ static void __init dk_map_io(void) ...@@ -64,8 +53,16 @@ static void __init dk_map_io(void)
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
/* Setup the serial ports and console */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_init_serial(&dk_uart_config); at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
} }
static void __init dk_init_irq(void) static void __init dk_init_irq(void)
......
...@@ -40,24 +40,24 @@ ...@@ -40,24 +40,24 @@
#include "generic.h" #include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata eb9200_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init eb9200_map_io(void) static void __init eb9200_map_io(void)
{ {
/* Initialize processor: 18.432 MHz crystal */ /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA); at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the serial ports and console */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_init_serial(&eb9200_uart_config); at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART2 on ttyS2. (Rx, Tx) - IRDA */
at91_register_uart(AT91RM9200_ID_US2, 2, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
} }
static void __init eb9200_init_irq(void) static void __init eb9200_init_irq(void)
......
...@@ -45,17 +45,6 @@ ...@@ -45,17 +45,6 @@
#include "generic.h" #include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata ek_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init ek_map_io(void) static void __init ek_map_io(void)
{ {
/* Initialize processor: 18.432 MHz crystal */ /* Initialize processor: 18.432 MHz crystal */
...@@ -64,8 +53,16 @@ static void __init ek_map_io(void) ...@@ -64,8 +53,16 @@ static void __init ek_map_io(void)
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
/* Setup the serial ports and console */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_init_serial(&ek_uart_config); at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
} }
static void __init ek_init_irq(void) static void __init ek_init_irq(void)
......
...@@ -37,19 +37,10 @@ ...@@ -37,19 +37,10 @@
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
#include "generic.h" #include <asm/arch/at91rm9200_mc.h>
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata kb9202_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 3,
.tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init kb9202_map_io(void) static void __init kb9202_map_io(void)
{ {
...@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void) ...@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
/* Set up the LEDs */ /* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
/* Setup the serial ports and console */ /* DBGU on ttyS0. (Rx & Tx only) */
at91_init_serial(&kb9202_uart_config); at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx & Tx only) */
at91_register_uart(AT91RM9200_ID_US0, 1, 0);
/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
at91_register_uart(AT91RM9200_ID_US1, 2, 0);
/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
} }
static void __init kb9202_init_irq(void) static void __init kb9202_init_irq(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment